Search

Purpose: Pediatric heart failure patients remain in critical need of a dedicated mechanical circulatory support (MCS) solution as development efforts for specific pediatric devices continue to fall behind those for the adult population. The Inspired Pediatric VAD is being developed as a pediatric specific MCS solution to provide up to 30-days of circulatory or respiratory support in a compact modular package that could allow for patient ambulation during treatment. Methods: Hydrodynamic performance (flows, pressures), impeller/rotor mechanical properties (torques, forces), and flow shear stress and residence time distributions of the latest design version, Inspired Pediatric VAD V3, were numerically predicted and investigated using computational fluid dynamics (CFD) software (SolidWorks Flow Simulator). Results: Hydrodynamic performance was numerically predicted, indicating no change in flow and pressure head compared to the previous device design (V2), while displaying increased impeller/rotor torques and translation forces enabled by improved geometry. Shear stress and flow residence time volumetric distributions are presented over a range of pump rotational speeds and flow rates. At the lowest pump operating point (3000 RPM, 0.50 L/min, 75 mmHg), 79% of the pump volume was in the shear stress range of 0–10 Pa with < 1% of the volume in the critical range of 150–1000 Pa for blood damage. At higher speed and flow (5000 RPM, 3.50 L/min, 176 mmHg), 65% of the volume resided in the 0–10 Pa range compared to 2.3% at 150–1000 Pa. Conclusions: The initial computational characterization of the Inspired Pediatric VAD V3 is encouraging and future work will include device prototype testing in a mock circulatory loop and acute large animal model. [ABSTRACT FROM AUTHOR]

Inspired Therapeutics (Merritt Island, FL) is developing a mechanical circulatory support (MCS) system designed as a single driver with interchangeable, extracorporeal, magnetically levitated pumps. The NeoMate system design features an integrated centrifugal rotary pump, motor, and controller that will be housed in a single compact unit. Conceptually, the primary innovation of this technology will be the combination of disposable, low-cost pumps for use with a single, multi-functional, universal controller to support multiple pediatric cardiopulmonary indications. In response to the paucity of clinically available pediatric devices, Inspired Therapeutics is specifically targeting the underserved neonate and infant heart failure (HF) patient population first. In this article, we present the development of the prototype Inspired Therapeutics NeoMate System for pediatric left ventricular assist device (LVAD) support, and feasibility testing in static mock flow loops (H-Q curves), dynamic mock flow loops (hemodynamics), and in an acute healthy ovine model (hemodynamics and clinical applicability). The resultant hydrodynamic and hemodynamic data demonstrated the ability of this prototype pediatric LVAD and universal controller to function over a range of rotary pump speeds (500–6000 RPM), to provide pump flow rates of up to 2.6 L/min, and to volume unload the left ventricle in acute animals. Key engineering challenges observed and proposed solutions for the next design iteration are also presented. [ABSTRACT FROM AUTHOR]

Purpose: Despite the availability of first-generation extracorporeal mechanical circulatory support (MCS) systems that are widely used throughout the world, there is a need for the next generation of smaller, more portable devices (designed without cables and a minimal number of connectors) that can be used in all in-hospital and transport settings to support patients in heart failure. Moreover, a system that can be universally used for all indications for use including cardiopulmonary bypass (CPB), uni- or biventricular support (VAD), extracorporeal membrane oxygenation (ECMO) and respiratory assist that is suitable for use for adult, neonate, and pediatric patients is desirable. Providing a single, well designed, universal technology could reduce the incidence of human errors by limiting the need for training of hospital staff on a single system for a variety of indications throughout the hospital rather than having to train on multiple complex systems. The objective of this manuscript is to describe preliminary research to develop the first prototype pump for use as a ventricular assist device for pediatric patients with the Inspired Universal MCS technology. The Inspired VAD Universal System is an innovative extracorporeal blood pumping system utilizing novel MagLev technology in a single portable integrated motor/controller unit which can power a variety of different disposable pump modules intended for neonate, pediatric, and adult ventricular and respiratory assistance. Methods: A prototype of the Inspired Pediatric VAD was constructed to determine the hemodynamic requirements for pediatric applications. The magnitude/range of hydraulic torque of the internal impeller was quantified. The hydrodynamic performance of the prototype pump was benchmarked using a static mock flow loop model containing a heated blood analogue solution to test the pump over a range of rotational speeds (500–6000 RPM), flow rates (0–3.5 L/min), and pressures (0 to ~ 420 mmHg). The device was initially powered by a shaft-driven DC motor in lieu of a full MagLev design, which was also used to calculate the fluid torque acting on the impeller. Results: The pediatric VAD produced flows as high as 4.27 L/min against a pressure of 127 mmHg at 6000 RPM and the generated pressure and flow values fell within the desired design specifications. Conclusions: The empirically determined performance and torque values establish the requirements for the magnetically levitated motor design to be used in the Inspired Universal MagLev System. This next step in our research and development is to fabricate a fully integrated and functional magnetically levitated pump, motor and controller system that meets the product requirement specifications and achieves a state of readiness for acute ovine animal studies to verify safety and performance of the system. [ABSTRACT FROM AUTHOR]

In the US, the most significant morbidity and mortality associated with non-valvular atrial fibrillation (NVAF) is embolic stroke, with 90% of thrombus originating from the left atrial appendage (LAA). Anticoagulation is the preferred treatment for the prevention of stroke in NVAF patients, but clinical studies have demonstrated high levels of non-compliance and increased risk of bleeding or ineligibility for anticoagulation therapy, especially in the elderly population where the incidence of NVAF is highest. Alternatively, stroke may be preventing using clinically approved surgical and catheter-based devices to exclude or occlude the LAA, but these devices continue to be plagued by peri-device leaks and thrombus formation because of residual volume. To overcome these limitations, Cor Habere (Louisville, KY) and the University of Louisville are developing a LAA closure device (StrokeShield) that completely occludes and collapses the LAA to minimize the risk of stroke. The StrokeShield device is a collapsible occluder (nitinol reinforced membrane) that completely covers the LAA orifice with an expandable conical coil anchor that attaches to the myocardium. The device is designed for catheter-based delivery and expands to completely occlude the LAA orifice and collapse the LAA. The primary advantages of the StrokeShield system are a completely sealed LAA (no peri-device flow or residual space) and smooth endothelialized connection to the left atrial wall with minimal risk of cardiac bleeding and tamponade. We tested proof-of-concept of a prototype StrokeShield device in acute (n = 2) and chronic 60-day (n = 2) healthy canine models. Acute results demonstrated that the conical coil securely attached to the myocardium (5N pull-out force) and the Nitinol umbrella fully deployed and covered the LAA ostium. Results from the chronic implants demonstrated long-term feasibility of device placement with no procedural or device-related intra- or post-operative complications, secure placement and correct positioning of the device with no device migration. The device successfully occluded the LAA ostium and collapsed the LAA with no interference with the mitral valve, circumflex coronary artery, or pulmonary veins. Necropsy demonstrated no gross signs of thrombus or end-organ damage and the device was encapsulated in the LAA. Histology demonstrated mature neointima covering the device with expected foreign body inflammatory response. These early positive results will help to guide the iterative design process for the continued development of the StrokeShield system. [ABSTRACT FROM AUTHOR]

Modulation of pump speed has been proposed and implemented clinically to improve vascular pulsatility in continuous flow ventricular assist device patient. The flow dynamics of the HVAD with a promising asynchronous pump speed modulation and its potential risk for device-induced blood trauma was investigated numerically. The boundary conditions at the pump inlet and outlet were defined using the pressure waveforms adapted from the experimentally recorded ventricular and arterial pressure waveforms in a large animal ischemic heart failure (IHF) model supported by the HVAD operated at constant and modulated pump speeds. Shear stress fields and hemolysis indices were derived from the simulated flow fields. The overall features of the computationally generated flow waveforms at simulated constant and pulse-modulated speed operations matched with those of the experimentally recorded flow waveforms. The simulations showed that the shear stress field and hemolysis index vary throughout the cardiac cycle under the constant speed operation, and also as a function of modulation profile under modulated speed operation. The computational model did not demonstrate any differences in the time average hemolysis index between constant and modulated pump speed operations, thereby predicting pulse-modulated speed operation may help to restore vascular pulsatility without any further increased risk of blood trauma. Graphical abstract The streamline inside the HVAD pump and the wall shear stress distribution on the impeller surface at six discrete time instants over one cardiac cycle under constant speed operation (3000 rpm) (a) and under pulse-modulated speed operation (b). c Computationally predicted flow rate waveform under pulse-modulated speed operation. d Computationally predicted time-varying HI generated by the HVAD pump under the two operation modes constant speed (dash line) and pulse-modulated speed (solid line). These figures indicate that the pulse-modulated speed operation may help to restore vascular pulsatility without any further increased risk of blood trauma. [ABSTRACT FROM AUTHOR]

Objective: Rotary biventricular assist devices (BiVAD) are mechanical pumps that are implanted in the left and right ventricles of biventricular failure patients to pump blood and provide mechanical circulatory support. The objective of this paper was to develop and test a novel sensorless control algorithm that simultaneously satisfies the objectives of providing physiologic control (BiVAD flows meet cardiac demand), preventing ventricular suction, and providing balanced left–right (systemic and pulmonary) flows without the use of implantable flow or pressure sensors in the nonlinear, time varying, and discontinuous circulatory system. Methods: The control algorithm consists of two gain-scheduled proportional–integral controllers for left and right ventricular assist devices and only requires intrinsic pump parameters (speed and power) to maintain differential pump speeds ($\Delta $ RPM $_{L}$ and $\Delta $ RPM $_{R}$) above user-defined thresholds to prevent ventricular suction, and average reference pressure heads ($\Delta \text{P}_{L}$ , $\Delta \text{P}_{R}$) to provide physiologic perfusion and balance left–right-sided flow rates. A model-based approach with extended Kalman and Golay–Savitzky filters was used to estimate $\Delta \text{P}_{L}$ and $\Delta \text{P}_{R}$. Efficacy and robustness of the algorithm were evaluated in silico during simulated rest and exercise test conditions for: 1) excessive $\Delta \text{P}_{L }$ and/or $\Delta \text{P}_{R}$ setpoints; 2) rapid threefold increase in pulmonary vascular or vena caval resistances; 3) transitions from exercise to rest; and 4) ventricular fibrillation. Results and Conclusion: The proposed sensorless BiVAD algorithm successfully prevented suction, restored physiologic perfusion, and inherently maintained left–right-sided balance for all test conditions. Significance: The proposed algorithm does not require any device modification and may be integrated into current clinical BiVADs. [ABSTRACT FROM AUTHOR]

Thrombosis and bleeding are devastating adverse events in patients supported with blood-contacting medical devices (BCMDs). In this study, we delineated that high non-physiological shear stress (NPSS) caused platelet dysfunction that may contribute to both thrombosis and bleeding. Human blood was subjected to NPSS with short exposure time. Levels of platelet surface GPIbα and GPVI receptors as well as activation level of GPIIb/IIIa in NPSS-sheared blood were examined with flow cytometry. Adhesion of sheared platelets on fibrinogen, von Willibrand factor (VWF), and collagen was quantified with fluorescent microscopy. Ristocetin- and collagen-induced platelet aggregation was characterized by aggregometry. NPSS activated platelets in a shear and exposure time-dependent manner. The number of activated platelets increased with increasing levels of NPSS and exposure time, which corresponded well with increased adhesion of sheared platelets on fibrinogen. Concurrently, NPSS caused shedding of GPIbα and GPVI in a manner dependent on shear and exposure time. The loss of intact GPIbα and GPVI increased with increasing levels of NPSS and exposure time. The number of platelets adhered on VWF and collagen decreased with increasing levels of NPSS and exposure time, respectively. The decrease in the number of platelets adhered on VWF and collagen corresponded well with the loss in GPIbα and GPVI on platelet surface. Both ristocetin- and collagen-induced platelet aggregation in sheared blood decreased with increasing levels of NPSS and exposure time. The study clearly demonstrated that high NPSS causes simultaneous platelet activation and receptor shedding, resulting in a paradoxical effect on platelet function via two distinct mechanisms. The results from the study suggested that the NPSS could induce the concurrent propensity for both thrombosis and bleeding in patients. [ABSTRACT FROM AUTHOR]

Abstract: In this study, the flow features and device‐associated blood trauma in 4 clinical ventricular assist devices (VADs; 2 implantable axial VADs, 1 implantable centrifugal VAD, and 1 extracorporeal VAD) were computationally analyzed under clinically relevant pulsatile flow conditions. The 4 VADs were operated at fixed pump speed at a mean rate of 4.5 L/min. Mean pressure difference, wall shear stress, volume distribution of scalar shear stress (SSS), and shear‐induced hemolysis index (HI) were derived from the flow field of each VAD and were compared. The computationally predicted mean pressure difference across the 3 implantable VADs was ~70 mmHg, and the extracorporeal VAD was ~345 mmHg, which matched well with their reported pressure‐flow curves. The axial VADs had higher mean wall shear stress and SSS compared with the centrifugal VADs. However, the residence time of the centrifugal VADs was much longer compared with the axial VADs because of the large volume of the centrifugal VADs. The highest SSS was observed in one axial VAD, and the longest exposure time was observed in 1 centrifugal VAD. These 2 VADs generated the highest HI. The shear‐induced HI varied as a function of flow rate within each cardiac cycle. At fixed pump speed, the HI was greatest at low flow rate due to longer exposure time to shear stress compared with at high flow rate. Subsequently, we hypothesize that to reduce the risk of blood trauma during VAD support, shear stress magnitude and exposure time need to be minimized. [ABSTRACT FROM AUTHOR]

Blood can become hypercoagulable by shear-induced platelet activation and generation of microparticles. It has been reported that nonphysiological shear stress (NPSS) could induce shedding of platelet receptor glycoprotein (GP) Iba, which may result in an opposite effect to hemostasis. The aim of this study was to investigate the influence of the NPSS on platelets and von Willebrand factor (vWF). Human blood was exposed to two levels of NPSS (25 Pa, 125 Pa) with an exposure time of 0.5 s, generated by using a novel blood-shearing device. Platelet activation (P-selectin expression, GPIIb/IIIa activation and generation of microparticles) and shedding of three platelet receptors (GPIbα, GPVI, GPIIb/IIIa) in sheared blood were quantified using flow cytometry. Aggregation capacity of sheared blood induced by ristocetin and collagen was evaluated using an aggregometer. Shear-induced vWF damage was characterized with Western blotting. Consistent with the published data, the NPSS caused significantly more platelets to become activated with increasing NPSS level. Meanwhile, the NPSS induced the shedding of platelet receptors. The loss of the platelet receptors increased with increasing NPSS level. The aggregation capacity of sheared blood induced by ristocetin and collagen decreased. There was a loss of high molecular weight multimers (HMWMs) of vWF in sheared blood. These results suggest that the NPSS induced a paradoxical effect. More activated platelets increase the risk of thrombosis, while the reduction in platelet receptors and the loss of HMWM-vWF increased the propensity of bleeding. The finding might provide a new perspective to understand thrombosis and acquired bleeding disorder in patients supported with blood contacting medical devices. [ABSTRACT FROM AUTHOR]

The role of oxidative stress and leukocyte activation has not been elucidated in developing systemic inflammatory response syndrome ( SIRS) in heart failure ( HF) patients after continuous-flow left ventricular assist device ( CF-LVAD) implantation. The objective of this study was to investigate the change of plasma redox status and leukocyte activation in CF-LVAD implanted HF patients with or without SIRS. We recruited 31 CF-LVAD implanted HF patients (16 SIRS and 15 non- SIRS) and 11 healthy volunteers as the control. Pre- and postimplant blood samples were collected from the HF patients. Plasma levels of oxidized low-density lipoprotein ( oxLDL), malondialdehyde ( MDA), total antioxidant capacity ( TAC), superoxide dismutase ( SOD) in erythrocyte, myeloperoxidase ( MPO), and polymorphonuclear elastase ( PMN-elastase) were measured. The HF patients had a preexisting condition of oxidative stress than healthy controls as evident from the higher oxLDL and MDA levels as well as depleted SOD and TAC. Leukocyte activation in terms of higher plasma MPO and PMN-elastase was also prominent in HF patients than controls. Persistent oxidative stress and reduced antioxidant status were found to be more belligerent in HF patients with SIRS after the implantation of CF-LVAD when compared with non- SIRS patients. Similar to oxidative stress, the activation of blood leukocyte was significantly highlighted in SIRS patients after implantation compared with non- SIRS. We identified that the plasma redox status and leukocyte activation became more prominent in CF-LVAD implanted HF patients who developed SIRS. Our findings suggest that plasma biomarkers of oxidative stress and leukocyte activation may be associated with the development of SIRS after CF-LVAD implant surgery. [ABSTRACT FROM AUTHOR]

Ventricular assist devices ( VADs) have emerged as a successful treatment option for advanced heart failure. The objective of this study was to develop a clinically relevant model of chronic ischemic cardiomyopathy to investigate functional, histological, and molecular changes during mechanical circulatory support. In calves ( n = 17, 94 ± 7 kg), 90 μm microspheres were injected percutaneously into the left coronary artery. Serial echocardiography was performed weekly to evaluate cardiac function. Sixty days after coronary microembolization, a terminal study was performed via thoracotomy to measure hemodynamics. Regional myocardial and end-organ blood flows were quantified with 15-μm fluorescent-labeled microspheres. Myocardial fibrosis, myocyte size, and myocardial apoptosis were quantified with histological stains. Eleven animals survived coronary microembolization and exhibited clinical and statistically significant echocardiographic and hemodynamic signs of severe systolic dysfunction. Statistically significant decreases in regional myocardial blood flow and increases in myocardial fibrosis, myocyte size, total myocardial apoptosis, and cardiac myocyte-specific apoptosis were observed. End-organ hypoperfusion was observed. Coronary microembolization induced stable and reproducible chronic left ventricular failure in calves. The anatomical size and physiology of the bovine heart and thorax are appropriate to study novel interventions for the clinical management of heart failure. This model is an appropriate physiological substrate in which to test VAD and adjunctive biological therapies. [ABSTRACT FROM AUTHOR]

Mechanical circulatory assist devices that provide temporary support in heart failure patients are needed to enable recovery or provide a bridge to decision. Minimizing risk of blood damage (i.e., hemolysis) with these devices is critical, especially if the length of support needs to be extended. Hematologic responses of the RotaFlow (Maquet) and CentriMag (Thoratec) temporary support devices were characterized in an in vitro feasibility study. Paired static mock flow loops primed with fresh bovine blood (700 mL, hematocrit [Hct] = 25 ± 3%, heparin titrated for activated clotting time >300 s) pooled from a single-source donor were used to test hematologic responses to RotaFlow ( n = 2) and CentriMag ( n = 2) simultaneously. Pump differential pressures, temperature, and flow were maintained at 250 ± 10 mm Hg, 25 ± 2°C, and 4.2 ± 0.25 L/min, respectively. Blood samples (3 mL) were collected at 0, 60, 120, 180, 240, 300, and 360 min after starting pumps in accordance with recommended Food and Drug Administration and American Society for Testing and Materials guidelines. The CentriMag operated at a higher average pump speed (3425 rpm) than the RotaFlow (3000 rpm) while maintaining similar constant flow rates (4.2 L/min). Hematologic indicators of blood trauma (hemoglobin, Hct, platelet count, plasma free hemoglobin, and white blood cell) for all measured time points as well as normalized and modified indices of hemolysis were similar (RotaFlow: normalized index of hemolysis [NIH] = 0.021 ± 0.003 g/100 L, modified index of hemolysis [MIH] = 3.28 ± 0.52 mg/mg compared to CentriMag: NIH = 0.041 ± 0.010 g/100 L, MIH = 6.08 ± 1.45 mg/mg). In this feasibility study, the blood trauma performance of the RotaFlow was similar or better than the CentriMag device under clinically equivalent, worst-case test conditions. The RotaFlow device may be a more cost-effective alternative to the CentriMag. [ABSTRACT FROM AUTHOR]

Heart failure (HF) is increasing worldwide and represents a major burden in terms of health care resources and costs. Despite advances in medical care, prognosis with HF remains poor, especially in advanced stages. The large patient population with advanced HF and the limited number of donor organs stimulated the development of mechanical circulatory support (MCS) devices as a bridge to transplant and for destination therapy. However, MCS devices require a major operative intervention, cardiopulmonary bypass, and blood component exposure, which have been associated with significant adverse event rates, and long recovery periods. Miniaturization of MCS devices and the development of an efficient and reliable transcutaneous energy transfer system may provide the vehicle to overcome these limitations and usher in a new clinical paradigm in heart failure therapy by enabling less invasive beating heart surgical procedures for implantation, reduce cost, and improve patient outcomes and quality of life. Further, it is anticipated that future ventricular assist device technology will allow for a much wider application of the therapy in the treatment of heart failure including its use for myocardial recovery and as a platform for support for cell therapy in addition to permanent long-term support. [ABSTRACT FROM AUTHOR]

A counterpulsation device (Symphony) is being developed to provide long-term circulatory support for advanced heart failure (HF) patients. In acute animal experiments, flow waveform patterns in the aortic, carotid, and coronary arteries were compared during Symphony and intra-aortic balloon pump (IABP) support. Human data were examined for similarities. The 30-mL Symphony was compared to a 40-mL IABP in calves with cardiac dysfunction (80-100 kg, n = 8). Aortic pressures and aortic, carotid, and coronary artery flows were simultaneously recorded at baseline (devices off) and during 1:1 and 1:2 support. Forward, retrograde, and mean flows were calculated and compared for each test condition. Findings were also compared to aortic flow measurements recorded in HF patients ( n = 21) supported by 40-mL IABP. IABP caused significant retrograde flows in the aorta, coronary (IABP: −24 ± 8 mL/min, Symphony: −6 ± 2 mL/min, baseline: −2 ± 1 mL/min, P < 0.05), and carotid arteries (IABP: −30 ± 5 mL/min, Symphony: −0 ± 0 mL/min, baseline: −0 ± 0 L/min, P < 0.05) during ventricular systole compared to the Symphony. IABP support produced higher diastolic pressure and flow augmentation compared to Symphony. Due to retrograde flows during IABP support, Symphony provided higher overall coronary, carotid, and aortic flows. Similar reduction in total aortic flows due to retrograde flow was observed in HF patients during IABP support. Counterpulsation with an IABP via aortic volume displacement produces retrograde flows during rapid balloon deflation that reduces total flow. Counterpulsation with Symphony via volume removal eliminates retrograde flow and improves total flow more than that achieved with IABP. The Symphony may provide long-term hemodynamic benefits in HF patients. [ABSTRACT FROM AUTHOR]

The objective of this clinical study was to quantify the incidence and magnitude of intraaortic balloon pump (IABP) inflation and deflation landmark discrepancies associated with the IABP catheter arterial pressure waveform. Cardiac surgery patients with an IABP inserted prior to surgery were recruited. Following cardiac exposure, a high-fidelity pressure catheter was inserted into the aortic root for digital recording. The radial artery pressure signal was simultaneously recorded from the patient monitor along with the arterial pressure and electrocardiogram waveforms from the IABP console while operating at 1:1 and 1:2 synchronization. In selected patients, recordings were obtained with the IABP timed to the high-fidelity aortic root waveform. In all 11 patients, inflation and deflation landmark delays were observed when comparing the aortic root waveforms to the IABP arterial pressure waveforms (inflation delay = 74 ± 29 [23-117] ms; deflation delay = 71 ± 37 [24-141] ms, mean ± standard deviation [min-max]). Delays were greater when compared to the radial artery waveform (inflation delay = 175 ± 50 [100-233] ms; deflation delay = 168 ± 52 [100-274] ms). In all cases, the landmark delays were statistically different from zero ( P < 0.001). Diastolic augmentation and afterload reduction varied with waveform source. Conflicting indications of afterload reduction occurred in four patients. Timing to the aortic root waveform resulted in greater diastolic pressure augmentation and afterload reduction but mixed changes in stroke volume. Delay and distortion of the arterial waveform was consistently found when measured through the IABP catheter lumen. These delays can alter IABP efficacy and may be eliminated by using high-fidelity sensing of aortic pressure. [ABSTRACT FROM AUTHOR]

Left ventricular assist devices (LVADs) constitute a recent advance in heart failure (HF) therapeutics. As the rigorous experimental assessment of LVADs in HF requires large animal models, our objective was to develop a bovine model of cardiomyopathy. Male calves (n = 8) were used. Four animals received 1.2 mg/kg intravenous doxorubicin weekly for seven weeks and four separate animals were studied as controls. Doxorubicin-treated animals were followed with weekly echocardiography. Target LV dysfunction was defined as an ejection fraction ≤35%. Sixty days after initiating doxorubicin, a terminal study was performed to determine hemodynamic, histological, biochemical, and molecular parameters. All four doxorubicin-treated animals exhibited significant (P < 0.05) contractile dysfunction, with target LV dysfunction achieved in three animals. Doxorubicin-treated hearts exhibited significantly reduced coronary blood flow and interstitial fibrosis and significantly increased apoptosis and myocyte size. Gene expression of atrial natriuretic factor increased more than 3-fold. Plasma norepinephrine and epinephrine levels were significantly increased early and late during the development of cardiomyopathy, respectively. We conclude that sequential administration of intravenous doxorubicin in calves induces a cardiomyopathy with many phenotypic hallmarks of the failing human heart. This clinically-relevant model may be useful for testing pathophysiologic responses to LVADs in the context of HF. [ABSTRACT FROM AUTHOR]

The miniaturization of mechanical assist devices and less invasive implantation techniques may lead to earlier intervention in patients with heart failure. As such, we evaluated the effectiveness of a novel, minimally invasive, implantable counterpulsation device (CPD) in augmenting cardiac function during impaired hemodynamics. We compared the efficacy of a 32-mL stroke volume CPD with a standard 40-mL intra-aortic balloon pump (IABP) over a range of clinically relevant pathophysiological conditions. Male calves were instrumented via thoracotomy, the CPD was anastomosed to the left carotid artery, and the IABP was positioned in the descending aorta. Hemodynamic conditions of hypertension, hypotension, and heart failure were pharmacologically simulated and data were recorded during CPD and IABP support (off, 1:2, 1:1 modes) for each condition. In all three pathophysiological conditions, the CPD and IABP produced similar and statistically significant ( P < 0.05) increases in coronary artery blood flow normalized to the left ventricular (LV) workload. During hypotension and heart failure conditions, however, the CPD produced significantly greater reductions in LV workload and myocardial oxygen consumption as compared with the IABP. A novel 32-mL CPD connected to a peripheral artery produced equivalent or greater hemodynamic benefits than a standard 40-mL IABP during pharmacologically induced hypertension, hypotension, and heart failure conditions. [ABSTRACT FROM AUTHOR]

A growing population experiencing heart failure (100 000 patients/year), combined with a shortage of donor organs (less than 2200 hearts/year), has led to increased and expanded use of mechanical circulatory support (MCS) devices. MCS devices have successfully improved clinical outcomes, which are comparable with heart transplantation and result in better 1-year survival than optimal medical management therapies. The quality of perfusion provided during MCS therapy may play an important role in patient outcomes. Despite demonstrated physiologic benefits of pulsatile perfusion, continued use or development of pulsatile MCS devices has been widely abandoned in favor of continuous flow pumps owing to the large size and adverse risks events in the former class, which pose issues of thrombogenic surfaces, percutaneous lead infection, and durability. Next-generation MCS device development should ideally implement designs that offer the benefits of rotary pump technology while providing the physiologic benefits of pulsatile end-organ perfusion. [ABSTRACT FROM AUTHOR]