Search

Achieving the highest levels of compliance with the FAIR (findable, accessible, interoperable, reusable) principles for scientific data management and stewardship requires machine-actionable semantic representations of data and metadata. Human and machine interpretation and reuse of measurement datasets rely on metrological information that is often specified inconsistently or cannot be inferred automatically, while several ontologies to capture the metrological information are available, practical implementation examples are few. This work aims to close this gap by discussing how standardised measurement data and metadata could be presented using semantic web technologies. The examples provided in this paper are machine-actionable descriptions of Earth observation and bathymetry measurement datasets, based on two ontologies of quantities and units of measurement selected for their prominence in the semantic web. The selected ontologies demonstrated a good coverage of the concepts related to quantities, dimensions, and individual units as well as systems of units, but showed variations and gaps in the coverage, completeness and traceability of other metrology concept representations such as standard uncertainty, expanded uncertainty, combined uncertainty, coverage factor, probability distribution, etc. These results highlight the need for both (I) user-friendly tools for semantic representations of measurement datasets and (II) the establishment of good practices within each scientific community. Further work will consequently investigate how to support ontology modelling for measurement uncertainty and associated concepts. [ABSTRACT FROM AUTHOR]

Atmospheric corrections introduce uncertainties in bottom-of-atmosphere Ocean Colour (OC) products. In this paper, we analyse the uncertainty budget of the SeaDAS atmospheric correction algorithm. A metrological approach is followed, where each of the error sources are identified in an uncertainty tree diagram and briefly discussed. Atmospheric correction algorithms depend on ancillary variables (such as meteorological properties and column densities of gases), yet the uncertainties in these variables were not studied previously in detail. To analyse these uncertainties for the first time, the spread in the ERA5 ensemble is used as an estimate for the uncertainty in the ancillary data, which is then propagated to uncertainties in remote sensing reflectances using a Monte Carlo approach and the SeaDAS atmospheric correction algorithm. In an example data set, wind speed and relative humidity are found to be the main contributors (among the ancillary parameters) to the remote sensing reflectance uncertainties. [ABSTRACT FROM AUTHOR]

Providing uncertainties in satellite datasets used for Earth observation can be a daunting prospect because of the many processing stages and input data required to convert raw detector counts to calibrated radiances. The Sea and Land Surface Temperature Radiometer (SLSTR) was designed to provide measurements of the Earth's surface for operational and climate applications. In this paper the authors describe the traceability chain and derivation of uncertainty estimates for the thermal infrared channel radiometry. Starting from the instrument model, the contributing input quantities are identified to build up an uncertainty effects tree. The characterisation of each input effect is described, and uncertainty estimates provided which are used to derive the combined uncertainties as a function of scene temperature. The SLSTR Level-1 data products provide uncertainty estimates for fully random effects (noise) and systematic effects that can be mapped for each image pixel, examples of which are shown. [ABSTRACT FROM AUTHOR]

The Sentinel-3 mission is part of the Copernicus programme space segment and has the objective of making global operational observations of ocean, land and atmospheric parameters with its four on-board sensors. Two Sentinel-3 satellites are currently on orbit, providing near-daily global coverage. Sentinel-3A was launched on 16 February 2016 and Sentinel-3B on 25 April 2018. For the early part of its operation, Sentinel-3B flew in tandem with Sentinel-3A, flying 30 s ahead of its twin mission. This provided a unique opportunity to compare the instruments on the two satellites, and to test the per pixel uncertainty values in a metrologically-robust manner. In this work, we consider the tandem-phase data from the infrared channels of one of the on-board instruments: the Sea and Land Surface Temperature Radiometer, SLSTR. A direct comparison was made of both the Level 1 radiance values and the Level 2 sea surface temperature values derived from those radiances. At Level 1, the distribution of differences between the sensor values were compared to the declared uncertainties for data gridded on to a regular latitude-longitude grid with propagated pixel uncertainties. The results showed good overall radiometric agreement between the two sensors, with mean differences of ∼0.06 K, although there was a scene-temperature dependent difference for the oblique view that was consistent with what was expected from a stray light effect observed pre-flight. We propose a means to correct for this effect based on the tandem data. Level 1 uncertainties were found to be representative of the variance of the data, expect in those channels affected by the stray light effect. The sea surface temperature results show a very small difference between the sensors that could be in part due to the fact that the Sentinel-3A retrieval coefficients were also applied to the Sentinel-3B retrieval because the Sentinel-3B coefficients are not currently available. This will lead to small errors between the S3A and S3B retrievals. The comparison also suggests that the retrieval uncertainties may need updating for two of the retrieval processes that there are extra components of uncertainty related the quality level and the probability of cloud that should be included. Finally, a study of the quality flags assigned to sea surface temperature pixel values provided valuable insight into the origin of those quality levels and highlighted possible uncertainties in the defined quality level. [ABSTRACT FROM AUTHOR]

During its commissioning phase, the Copernicus Sentinel-3B satellite has been placed in a tandem formation with Sentinel-3A for a period of 6 months. This configuration allowed a direct comparison of measurements obtained by the two satellites. The purpose of this paper was to present the range of analyses that can be performed from this dataset, highlighting methodology aspects and the main outcomes for each instrument. We examined, in turn, the benefit of the tandem in understanding instrument operational modes differences, in assessing inter-satellite differences, and in validating measurement uncertainties. The results highlighted the very good consistency of the Sentinel-3A and B instruments, ensuring the complete inter-operability of the constellation. Tandem comparisons also pave the way for further improvements through harmonization of the sensors (OLCI), correction of internal stray-light sources (SLSTR), or high-frequency processing of SRAL SARM data. This paper provided a comprehensive overview of the main results obtained, as well as insights into some of the results. Finally, we drew the main lessons learned from the Sentinel-3 tandem phase and provided recommendations for future missions. [ABSTRACT FROM AUTHOR]

Fundamental and thematic climate data records derived from satellite observations provide unique information for climate monitoring and research. Since any satellite only operates over a relatively short period of time, creating a climate data record also requires the combination of space-borne measurements from a series of several (often similar) satellite sensors. Simply combining calibrated measurements from several sensors can, however, produce an inconsistent climate data record. This is particularly true of older, historic sensors whose behaviour in space was often different from their behaviour during pre-launch calibration and more scientific value can be derived from considering the series of historical and present satellites as a whole. Here, we consider harmonisation as a process that obtains new calibration coefficients for revised sensor calibration models by comparing calibrated measurements over appropriate satellite-to-satellite matchups, such as simultaneous nadir overpasses and which reconciles the calibration of different sensors given their estimated spectral response function differences. We present the concept of a framework that establishes calibration coefficients and their uncertainty and error covariance for an arbitrary number of sensors in a metrologically-rigorous manner. We describe harmonisation and its mathematical formulation as an inverse problem that is extremely challenging when some hundreds of millions of matchups are involved and the errors of fundamental sensor measurements are correlated. We solve the harmonisation problem as marginalised errors in variables regression. The algorithm involves computation of first and second-order partial derivatives using Algorithmic Differentiation. Finally, we present re-calibrated radiances from a series of nine Advanced Very High Resolution Radiometer sensors showing that the new time series has smaller matchup differences compared to the unharmonised case while being consistent with uncertainty statistics. [ABSTRACT FROM AUTHOR]