Search

Background: Studies of acetabular reconstruction with use of cement and bulk bone graft have demonstrated increasing rates of cup failure in patients with dysplastic hips seven years after total hip arthroplasty. Comparable data on the long-term results of bulk bone-grafting done in conjunction with cementless implants are limited. The aim of this study was to review the clinical and radiographic results of autologous bulk bone-grafting in conjunction with a cementless cup.Methods: From 1987 to 1992, forty-seven patients (forty women and seven men, with an average age of 50.4 years) who had developmental dysplasia of the hip underwent fifty-six total hip arthroplasties and received a structural graft in combination with a cementless Harris-Galante type-I cup. All patients were followed prospectively. In fifty-five hips, implant migration was measured with single-image radiographic analysis.Results: After an average duration (and standard deviation) of 10.2 +/- 2.9 years, three patients (four hips) had died. In the surviving patients, four implants had been revised and two had radiographic evidence of loosening. With use of revision and loosening as end points, the eleven-year survival rates were 91.6% and 88.9%, respectively. Of the fifty implants that had no loosening, fourteen had measurable cup migration, thirty-five had no migration, and one implant could not be measured. All migrations but one were progressive. With loosening used as the end point, the survival rate at eleven years was 100% for the implants with no migration; however, the survival rate for the cups that had migrated was 69.3% (p = 0.0012).Conclusions: The eleven-year survival rate for the spherical press-fit cups in combination with bulk bone-grafting is satisfactory, given the complexity of these reconstructions. However, the difference between the survival of the implants that had migrated and those that had not was significant. We expect that the thirteen implants with progressive acetabular migration at the time of the latest follow-up are at risk for loosening, which will increase the revision rate for this series in the coming years. [ABSTRACT FROM AUTHOR]

Background: Studies of acetabular reconstruction with use of cement and bulk bone graft have demonstrated increasing rates of cup failure in patients with dysplastic hips seven years after total hip arthroplasty. Comparable data on the long-term results of bulk bone-grafting done in conjunction with cementless implants are limited. The aim of this study was to review the clinical and radiographic results of autologous bulk bone-grafting in conjunction with a cementless cup.Methods: From 1987 to 1992, forty-seven patients (forty women and seven men, with an average age of 50.4 years) who had developmental dysplasia of the hip underwent fifty-six total hip arthroplasties and received a structural graft in combination with a cementless Harris-Galante type-I cup. All patients were followed prospectively. In fifty-five hips, implant migration was measured with single-image radiographic analysis.Results: After an average duration (and standard deviation) of 10.2 +/- 2.9 years, three patients (four hips) had died. In the surviving patients, four implants had been revised and two had radiographic evidence of loosening. With use of revision and loosening as end points, the eleven-year survival rates were 91.6% and 88.9%, respectively. Of the fifty implants that had no loosening, fourteen had measurable cup migration, thirty-five had no migration, and one implant could not be measured. All migrations but one were progressive. With loosening used as the end point, the survival rate at eleven years was 100% for the implants with no migration; however, the survival rate for the cups that had migrated was 69.3% (p = 0.0012).Conclusions: The eleven-year survival rate for the spherical press-fit cups in combination with bulk bone-grafting is satisfactory, given the complexity of these reconstructions. However, the difference between the survival of the implants that had migrated and those that had not was significant. We expect that the thirteen implants with progressive acetabular migration at the time of the latest follow-up are at risk for loosening, which will increase the revision rate for this series in the coming years. [ABSTRACT FROM AUTHOR]

A new model to extract important morphological parameters of noble metal nanoparticle ensembles with a broad size and shape distribution is presented. The technique is based on a rigorous simulation of the inhomogeneously broadened extinction profiles of nanoparticle ensembles. As input data, only experimentally accessible parameters, such as the amount of deposited material, the nanoparticle number density, and the relative size distribution of the nanoparticles, are used. The model can be applied to oblate nanoparticles, which exhibit a strong correlation between their shape and size, e.g., to supported nanoparticles generated, for example, by deposition of atoms and subsequent nucleation or by gas phase deposition. Both methods are standard preparation techniques to generate well-defined nanoparticle ensembles under ultra high vacuum conditions. We apply our model to gold and silver nanoparticles on sapphire and TiO supports and obtain a perfect agreement between the calculated and experimental data. More importantly, we could extract the functional dependence between the axial ratio and the radius of the nanoparticles within the ensemble and, therewith, the most probable axial ratio in the ensemble. In addition, the extinction spectrum of a nanoparticle ensemble irradiated with nanosecond pulsed laser light during growth has been successfully modeled. This demonstrates, that the model is able to describe shape changes of resonantly heated nanoparticles within the ensemble. By using the coverage as a free parameter, we could calculate from the extinction spectrum the average particle radius as well as the amount of desorbed atoms after irradiation with laser light. In summary, the model allows a fast, easy, but extensive morphological characterization of nanoparticle ensembles that exhibit a broad size and shape distribution. [ABSTRACT FROM AUTHOR]

Weight loss is a common phenomenon and an independent prognostic factor in amyotrophic lateral sclerosis (ALS). Several potential causal mechanisms, including intrinsic hypermetabolism and deficient food intake, have been discussed. We investigated the influence of fasting serum glucose, cholesterol, and triglyceride levels at time of diagnosis on survival in ALS. Serum cholesterol (LDL, HDL, and LDL/HDL ratio), triglycerides, and glucose were investigated in 488 patients (age of onset = 57.6 ± 12.6 years) in relation to survival and revised Amyotrophic Lateral Sclerosis Functional Rating Scale (ALS-FRS) data. High serum levels of both fasting cholesterol and triglycerides had a significantly positive effect on survival ( p < 0.05). We found a median prolonged life expectancy by 14 months for patients with serum triglyceride levels above the median of 1.47 mmol/l. The results suggest that the lipid metabolism and the nutritional status of ALS patients are important prognostic factors. These parameters should be thoroughly monitored during the clinical management of these patients. In case of progressive loss of body weight, a diet rich in lipids and calories should be considered. However, the final decision whether a lipid-rich diet should be recommended to ALS patients can only be based on a double-blind placebo-controlled interventional trial. Our results further imply that lipid-lowering drugs, e.g., statins, should be applied carefully in ALS patients although individual risk considerations must be made. [ABSTRACT FROM AUTHOR]

We report on a strong damping of the localized surface plasmon polariton resonance of gold nanoparticles. The ultra-fast dephasing time of localized surface plasmon polariton resonances in gold nanoparticles was systematically studied as a function of the particle size at a fixed photon energy of h ν=1.85 eV. Dephasing times ranging from $T_{2}^{\mathrm{exp}}$ = 5.5 fs to 15.0 fs were extracted and an influence of the reduced dimensions was detected. We have identified two dominant damping mechanisms: the well-known surface scattering and, for the first time, band structure changes. We have quantified the influence of these band structure changes on the optical properties by determining the essential damping parameter A to be Aexp=0.32 nm/fs. [ABSTRACT FROM AUTHOR]

Evaluation of patient activity is essential for clinical decision making before THA. To correlate age progression to patient activity after THA, we determined the number of walking cycles of 105 patients in different age groups by decades. Patients on average performed 6144 walking cycles per day (2.24 million cycles per year). Men were more active than women. The highest activity occurred in patients between 50 and 59 years of age, with a constant decrease in activity with advancing age. However, within age groups, we observed up to sixfold differences in the number of walking cycles per day. In addition to declining activity with advancing age, higher body mass index correlated with lower step counts. The high mean measured number of walking cycles, which were even higher than those reported for subjects without an arthroplasty, suggests patients benefit from THA. Female gender, advanced age, and obesity correlated with lower activity. Owing to the high intragroup variability of our results, preoperative evaluation of patient activity levels, individual patient factors, and patient demands, should be considered in clinical practice. [ABSTRACT FROM AUTHOR]

This retrospective study reviewed 9- to 11-year results after total hip arthroplasty (THA) with cemented titanium stems (Mueller-Straight-Stem). Ninety-one patients (110 hips) were examined clinically and radiologically at an average 9.5-year follow-up. Revisions for aseptic loosening were performed in 4 (4%) patients. Subsidence or varus position could only be observed in one of these patients. Radiolucent lines were found in 37 patients, mainly located around the proximal zones of the stem (zone 1, 7, 8, and 14). Harris scores were good or excellent in 78% and satisfactory in 20% of patients. The 9.5-year survival rate of the cemented titanium stem with regard to aseptic loosening was 96.4%. Body weight was significantly higher (88 +/- 5.4 kg) in the 4 patients with aseptic loosening, compared to patients without radiolucent lines (75 +/- 15 kg). The body weight to stem surface ratio showed a significant difference (1.5 kg/cm2 versus 1 kg/cm2; P < .05). No significant differences were found in other factors, including sex, size or type of stem, Harris score, heterotopic ossification, or body mass index. Good long-term results can be achieved with cemented titanium stem implants. This titanium implant is recommended for patients with hypersensitivity to chrome, cobalt, and nickel. mplanting the biggest possible stem seems to be most beneficial. [ABSTRACT FROM AUTHOR]

Ensembles of nanometer-sized Au, Co, Er, and FePt clusters were generated by a laser vaporization source and embedded in a MgO matrix grown on a mica substrate. The size distribution of the clusters was measured before sample preparation by time-of-flight mass spectrometry and afterwards by transmission electron microscopy. These well-characterized samples were used for investigations by small-angle X-ray scattering (SAXS). The scattering data was evaluated by Guinier analysis providing the average radii of the embedded clusters. The results are in good agreement with the cluster sizes obtained from the mass spectra as well as the dimensions determined from the transmission electron micrographs. Furthermore, other samples which were produced at an elevated substrate temperature of 500 °C exhibited an increased average cluster radius in the SAXS measurements. This behavior is attributed to diffusion and coalescence emerging at higher deposition temperatures. [ABSTRACT FROM AUTHOR]

BACKGROUND: Studies of acetabular reconstruction with use of cement and bulk bone graft have demonstrated increasing rates of cup failure in patients with dysplastic hips seven years after total hip arthroplasty. Comparable data on the long-term results of bulk bone-grafting done in conjunction with cementless implants are limited. The aim of this study was to review the clinical and radiographic results of autologous bulk bone-grafting in conjunction with a cementless cup. METHODS: From 1987 to 1992, forty-seven patients (forty women and seven men, with an average age of 50.4 years) who had developmental dysplasia of the hip underwent fifty-six total hip arthroplasties and received a structural graft in combination with a cementless Harris-Galante type-I cup. All patients were followed prospectively. In fifty-five hips, implant migration was measured with single-image radiographic analysis. RESULTS: After an average duration (and standard deviation) of 10.2 ± 2.9 years, three patients (four hips) had died. In the surviving patients, four implants had been revised and two had radiographic evidence of loosening. With use of re- vision and loosening as end points, the eleven-year survival rates were 91.6% and 88.9%, respectively. Of the fifty implants that had no loosening, fourteen had measurable cup migration, thirty-five had no migration, and one implant could not be measured. All migrations but one were progressive. With loosening used as the end point, the survival rate at eleven years was 100% for the implants with no migration; however, the survival rate for the cups that had migrated was 69.3% (p = 0.0012). CONCLUSIONS: The eleven-year survival rate for the spherical press-fit cups in combination with bulk bone-grafting is satisfactory, given the complexity of these reconstructions. However, the difference between the survival of the implants that had migrated and those that had not was significant. We expect that the thirteen implants with progressive acetabular migration at the time of the latest follow-up are at risk for loosening, which will increase the revision rate for this series in the coming years. [ABSTRACT FROM AUTHOR]

Background Poor bone stock in patients with osteonecrosis of the femoral head may be a reason for poor outcome after hip replacement. One way of studying bone quality is to measure implant migration. We thus investigated the clinical and radiographic results of cementless THR in younger patients with femoral head osteonecrosis. Patients and methods We studied hips in 41 patients (mean age 48 (25-63) years) with a cementless hip arthroplasty after late stage osteonecrosis. Clinical evaluation was by the Harris hip score, the WOMAC score and the SF-36 score. Stem subsidence was measured with the Ein Bild Roentgen Analyse femoral component analysis (EBRA-FCA) at 3, 12, 24, 60, and 72 months after operation. The average duration of follow-up was 7(1-9) years, with less than 2 years for 2 patients. Results There was no revision of any hip. No radiographic or clinical stem loosening was seen. After 60 months, the cementless stems showed a median subsidence of -0.7 mm (95% CI: -0.9 to -0.2). No femoral osteolysis occurred. Femoral radiolucent lines, all < 1 mm, were seen in 10 hips. At the latest follow-up the Harris hip score was 83 (23-100) points. Interpretation Our findings for porous-coated stems in patients with femoral osteonecrosis indicate no greater risk of stem subsidence and rate of osteolysis after an average of 7 years follow-up. Thus, we continue to use uncemented stems in younger patients with femoral osteonecrosis. However, continued follow-up will be necessary to evaluate the long-term outcome. [ABSTRACT FROM AUTHOR]

Copyright of Der Orthopäde is the property of Springer Nature and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Background: Studies of acetabular reconstruction with use of cement and bulk bone graft have demonstrated increasing rates of cup failure in patients with dysplastic hips seven years after total hip arthroplasty. Comparable data on the long-term results of bulk bone-grafting done in conjunction with cementless implants are limited. The aim of this study was to review the clinical and radiographic results of autologous bulk bone-grafting in conjunction with a cementless cup. Methods: From 1987 to 1992, forty-seven patients (forty women and seven men, with an average age of 50.4 years) who had developmental dysplasia of the hip underwent fifty-six total hip arthroplasties and received a structural graft in combination with a cementless Harris-Galante type-I cup. All patients were followed prospectively. In fifty-five hips, implant migration was measured with single-image radiographic analysis. Results: After an average duration (and standard deviation) of 10.2 ± 2.9 years, three patients (four hips) had died. In the surviving patients, four implants had been revised and two had radiographic evidence of loosening. With use of revision and loosening as end points, the eleven-year survival rates were 91.6% and 88.9%, respectively. Of the fifty implants that had no loosening, fourteen had measurable cup migration, thirty-five had no migration, and one implant could not be measured. All migrations but one were progressive. With loosening used as the end point, the survival rate at eleven years was 100% for the implants with no migration; however, the survival rate for the cups that had migrated was 69.3% (p = 0.0012). Conclusions: The eleven-year survival rate for the spherical press-fit cups in combination with bulk bone-grafting is satisfactory, given the complexity of these reconstructions. However, the difference between the survival of the implants that had migrated and those that had not was significant. We expect that the thirteen implants with progressive acetabular migration at the time of the latest follow-up are at risk for loosening, which will increase the revision rate for this series in the coming years. [ABSTRACT FROM AUTHOR]

Disruptions of the anterior cruciate ligament (ACL) of the knee joint are common and are currently treated using ligament or tendon grafts. In this study, we tested the hypothesis that it is possible to fabricate an ACL construct in vitro using mesenchymal stem cells (MSC) in combination with an optimized collagen type I hydrogel, which is in clinical use for autologous chondrocyte transplantation (ACT). ACL constructs were molded using a collagen type I hydrogel containing 5×10 5 MSC/mL and non-demineralized bone cylinders at each end of the constructs. The constructs were kept in a horizontal position for 10 days to allow the cells and the gel to remodel and attach to the bone cylinders. Thereafter, cyclic stretching with 1 Hz was performed for 14 days (continuously for 8 h/day) in a specially designed bioreactor. Histochemical analysis for H&E, Masson-Goldner and Azan and immunohistochemical analysis for collagen types I and III, fibronectin and elastin showed elongated fibroblast-like cells embedded in a wavy orientated collagenous tissue, together with a ligament-like extracellular matrix in the cyclic stretched constructs. No orientation of collagen fibers and cells, and no formation of a ligament-like matrix, could be seen in the non-stretched control group cultured in a horizontal position without tension. RT-PCR analysis revealed an increased gene expression of collagen types I and III, fibronectin and elastin in the stretched constructs compared with the non-stretched controls. In conclusion, ACL-like constructs from a collagen type I hydrogel, optimized for the reconstruction of ligaments, and MSC have been fabricated. As shown by other investigators, who analyzed the influence of cyclic stretching on the differentiation of MSC, our results indicate a ligament-specific increased protein and gene expression and the formation of a ligament-like extracellular matrix. The fabricated constructs are still too weak for animal experiments or clinical application and current investigations are focusing on the development of a construct with an internal augmentation using biodegradable fibers. [ABSTRACT FROM AUTHOR]

We demonstrate that supported gold nanoparticles with a given well-defined shape can be produced by laser-assisted growth. For this purpose, gold nanoparticles with average radii ranging from 1.5 to 13 nm, i.e., coverage between 0.45 × 1016 and 5.6 × 1016 atoms/cm2, were prepared at room temperature by self-assembly of atoms deposited on quartz and sapphire substrates. For analysis of the samples, the optical spectra of the particles were measured with p-polarized light and photon energies in the range of 1.3 to 3.1 eV. Irradiating the particles during growth with laser light of different wavelengths to stimulate surface plasmon excitation made it possible to stabilize mean axial ratios between 0.19 and 0.98. The influence of the laser fluence on the shape of the nanoparticles was also investigated and shows that the position of the surface plasmon resonance shifts to higher energies as the fluence rises. Optimum growth conditions to shape gold nanoparticles with axial ratios close to unity (spheres) with a relatively low laser fluence of 60 ± 5 mJ/cm2 have also been found. The results of our experiments show that laser-assisted growth is a powerfultechnique to control the shape of nanoparticles. [ABSTRACT FROM AUTHOR]

For many applications like surface enhanced Raman scattering or fluorescence microscopy in which the optical field enhancement associated with surface plasmon excitation is exploited, tunability of this collective resonance over a wide energy range is required. For this purpose we have investigated Au/Ag alloyed and Au-core/Ag-shell nanoparticles with different shell thicknesses. The core-shell nanoparticles were prepared by subsequent deposition of Au and Ag atoms on quartz substrates followed by diffusion and nucleation. The surface plasmon frequency could be stabilized at 2.2 eV independent of the Ag-shell thickness. Annealing of the core-shell nanoparticles makes possible tuning of the resonance frequency from 2.2 eV (λ= 564 nm) to 2.6 eV (λ= 477 nm). Theoretical modelling allows us to attribute this observation to the formation of alloy nanoparticles. [ABSTRACT FROM AUTHOR]

As demonstrated recently, persistent spectral hole burning in the optical spectra of metal nanoparticles makes possible the determination of the ultrafast dephasing time T[SUB2] of surface plasmon excitation. Here, the influence of the chemical environment on the dephasing process is investigated under ultrahigh vacuum conditions by depositing an adsorbate on the nanoparticles. By comparing the optical spectra and the widths of the generated holes of the nanoparticles with and without adsorbate coverage, the influence of chemical interface damping on the dephasing process is examined. The potential of the novel procedure is demonstrated for silver nanoparticles on sapphire and quartz substrates using SO[SUB2] as the adsorbate. A drastic decrease of T[SUB2] for the adsorbate-covered nanoparticles is observed and explained by dynamic charge transfer of electrons from the particles into and out of adsorbate states of the SO[SUB2] molecules. [ABSTRACT FROM AUTHOR]

We have combined two novel methods, i.e. persistent spectral hole burning and laser assisted growth, to measure the decay time T2 of surface plasmon excitation in metal nanoparticles of different size at constant well defined shape. The measured values of T2 amount to 6±0.4fs and are independent of size for diameters ranging from 8 to 25nm. [ABSTRACT FROM AUTHOR]

Copyright of Der Unfallchirurg is the property of Springer Nature and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Photodynamic laser therapy has been shown to be a new method for the treatment of synovitis in various animal models. Its principle is the accumulation of a photosensitizing drug in the inflamed synovium which is destroyed by photoactivation of the drug. In the present animal study we demonstrate the effect of a second-generation photosensitizer and suggest a concept for light dosimetry within the joint. We used 38 inbred rabbits for the IgG-induced arthritis model; ¶2 mg/kg of the benzoporphyrin derivative monoacid ring-A (BPD-MA) Verteporfin were administered 3 h before irradiation, which was performed using a 690-nm diode laser coupled to quartz glass fiber with a cylinder diffusor tip at a total light energy of either 180 or 470 J. During irradiation specific fluorescence of BPD-MA was monitored using a spectroscopy unit. The effect of the photodynamic laser therapy was documented grossly and histologically after 1 week. Within the 470 J-group a complete necrosis of the inflamed synovium was observed. The bradytrophic structures of the joint, however, remained unchanged. Throughout the 180 J-group the extent of necrosis was minor. During irradiation the tissue fluorescence of BPD-MA showed a dose-dependent decrease. Using BPD-MA as a photosensitizer a highly selective and minimal invasive synoviorthesis can be performed. At a dose of 2 mg/kg the histological effect depends on the light dose. For optimum efficacy a total energy of 470 J seems favorable. Online fluorescence detection can be used to monitor the effect of light administration. For dosimetry therefore an online tissue fluorescence detection may represent a technical solution. [ABSTRACT FROM AUTHOR]

Copyright of Arthroskopie is the property of Springer Nature and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The introduction of arthroscopic techniques has improved the surgical therapy of rheumatoid arthritis. The additional application of the holmium:yttrium aluminum garnet (Ho:YAG) laser likewise holds great promise by providing complete hemorrhagic control. Unfortunately, a minimally invasive solution for use in smaller joints has not yet emerged. The present study describes the possible treatment of these joints by means of photodynamic laser therapy. Cell culture studies with human synovial fibroblasts obtained from patients with rheumatoid arthritis have demonstrated a cytotoxic effect after administration of Photosan-3 as a photosensitizer and subsequent laser irradiation at 630 nm. For the in vivo studies, IgG-induced arthritis in rabbits, which is histologically consistent with the proliferative phase of rheumatoid arthritis, was used as the animal model. The histologic picture following photodynamic laser therapy with Photosan-3 revealed complete synovial destruction which also extended to the border of the subjacent joint capsule. In contrast, bradytrophic structures, e.g. cartilage, menisci, and ligaments, remained unchanged at both the macroscopic and microscopic levels. Therefore, photodynamic laser therapy can be considered a new method in the surgical treatment of inflammatory disease of the synovial membrane. It has the advantage of being minimally invasive, while offering a high degree of efficacy and selectivity. [ABSTRACT FROM AUTHOR]