Search

This work presents the validation of a new Opto‒Electro-Mechanical (MOEM) system consisting of a matrix of photodetectors for two-dimensional dosimetry evaluation with radiochromic films. The proposed system is based on a 5 × 10 matrix of photodetectors controlled by both in-house electronic circuit and graphical user interface, which enables optical measurements directly. We present the first tests performed in an X-ray machine and 137Cs source with that array by using Gafchromic EBT3 films. We obtained similar results than with a standard method (e.g. flat-bed scanner). Results were compared with Monte Carlo simulations and very good agreement was found. Results show the feasibility of using this system for dose evaluations. To the best of our knowledge, this is the first MOEM sensor for radiotherapy. Further developments are ongoing to create an advanced 16 × 16 LDRs system covering 1.6 cm × 1.6 cm with a 1 mm of spatial resolution. We point to develop a portable dosimetry tool delivering dose maps in real time to improve the clinical application of radiochromic films. [ABSTRACT FROM AUTHOR]

The successful operation of AGATA requires a complex mechanical support structure for the safe and reliable operation of the detectors. Three mechanical structures were designed for the scientific campaigns at LNL, GSI and GANIL, each accommodating an increasing number of detectors. The present phase of the project, to increase the number of detectors from 60 to 180 (the 4 π spectrometer), required a new concept in mechanical support. The detectors also require a suite of associated instrumentation, infrastructures and good system design for their optimum performance. This includes the automatic liquid nitrogen filling system, high and low voltage power supplies, and a series of signal cables and distribution systems. A well-designed electromagnetic compatibility across all the sub-systems is essential. An additional requirement is an easily accessible database that records the status of the wide range of components utilised on the project. This article describes all aspects of the mechanics and infrastructures. [ABSTRACT FROM AUTHOR]

The AGATA collaboration has a long-standing leadership in the development of front-end electronics for high resolution γ -ray spectroscopy using large volume high purity germanium detectors. For two decades, the AGATA collaboration has been developing state-of-the-art digital electronics processing with high resolution sampling ADC, high-speed signal transfer and fast readout to a high throughput computing (HTC) farm for on-line pulse shape analysis. The collaboration is presently addressing the next challenge of equipping a 4 π array with more than 6000 channels in high resolution mode, generating approximately 10 MHz of total trigger requests, coupled to a large variety of complementary instruments. A next generation of front-end electronics, presently under design, is based on industrial products (System on Module FPGA's), has higher integration and lower power consumption. In this contribution, the conceptual design of the new electronics is presented. The results of the very first tests of the pre-production electronics are presented as well as future perspectives. [ABSTRACT FROM AUTHOR]

The Advanced GAmma Tracking Array (AGATA) multidetector spectrometer will provide precise information for the study of the properties of the exotic nuclear matter (very unbalanced proton (Z) and neutron (N) numbers) along proton- and neutron-drip lines and of super-heavy nuclei. This is done using the latest technology of particle accelerators. The AGATA spectrometer consists of 180 high-purity germanium detectors. Each detector is segmented into 38 segments. The very harsh project requirements are to measure gamma-ray energies with very high resolution ($ < 1\times 10^{-3}$) at a high detector counting rate (50 K events/s/crystal). This results in a very high data transfer rate per crystal (5–8 Gb/s). The 38 segments are sampled at 100 MHz with 14 bits of resolution. The samples are continuously transferred to the control and processing (CAP) module, which reduces the data rate from 64 to 5 Gb/s. The CAP module also adds continuous monitoring data, which results in total outgoing data rate of 10 Gb/s. The serial transfer acquisition and readout over Ethernet (STARE) module is designed to fit between the CAP module and the computer farm. It will package the data from the CAP module and transmit it to the server farm using a 10-Gb/s user datagram protocol (UDP) connection with a delivery insurance mechanism implemented to ensure that all data are transferred. [ABSTRACT FROM AUTHOR]