Search

Abstract: The articulating components of artificial joints consist mainly of metals, ceramics, or polymers. Resulting abrasive wear particles can promote osteolysis and aseptic loosening of the endo‐prosthetic implants. Ultra‐high‐molecular‐weight‐polyethylene is the material used most for bearing couples in total hip replacement. In the present study, three types of polyethylene (PE) liners varying in material composition, i.e., (1) conventional PE (C‐PE), (2) sequentially cross‐linked PE (SX‐PE), (3) cross‐linked PE blended with vitamin E (EX‐PE) articulating with two types of femoral heads were used. After ultrasound treatment of each simulator lubricant, different concentrations (0.1/0.25/0.5/1.0 mL) were taken and dissolved in hydrochloric acid (37%) in a similar manner. The aim was to analyze the characteristics of wear particles generated in a hip simulator, with respect to different volumes of the lubricant. Within the scope of particle analysis, distinct alterations for particle characteristics were determined in the lubricant volumes and types of PE material used. A significant decrease in particle number for SX‐PE liners, compared to the C‐PE inserts and even more for EX‐PE inserts, was detected at each lubricant volume. Particle morphologies varied depending on PE material. Alterations in particle size and other morphologic parameters between the four tested volumes, could be proven for each PE type. In general, particle sizes and parameters (e.g., length and width) increased with increasing serum volumes. In conclusion, the chosen volume of the simulator lubricant used for particle analysis has a crucial influence on detected particle number, size distribution, and morphologic parameters. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 1299–1306, 2018. [ABSTRACT FROM AUTHOR]

Oxygen removal to very low residual contents in methane-rich gas streams and carbon dioxide as co-component (simulated biogas) was achieved via three different methods at various temperatures, namely, by reduction with hydrogen admixtures on Pt/ γ-Al2O3 catalysts, by oxygen absorption affinity of YBaCo4O7+ δ, and by the catalytic reaction with methane on both the materials, respectively. The three methods have characteristic advantages and disadvantages which are discussed in the context of existing methods for gas treatments focused on oxygen removal. Finally, the advantage of dielectric radio-frequency heating on the powdered functional materials is suggested as alternative to conventional routes. [ABSTRACT FROM AUTHOR]

Larger femoral heads lead to a decreased risk of total hip dislocation and an improved range of motion. However, the larger diameter is associated with increased wear rates. The low wear rates of crosslinked polyethylene opens up the possibility of using larger heads. The aim of this experimental study was to evaluate the wear of conventional non-crosslinked versus sequentially crosslinked polyethylene liners in combination with different ceramic head sizes (28, 36, 44 mm). Wear testing was performed in a hip simulator according to ISO 14242. Wear particles from the polyethylene liners were characterized after wear testing. The wear measurements revealed a significant increase in the wear of crosslinked polyethylene liners with larger heads. By sequential crosslinking, however, the gravimetric wear using larger heads was reduced to a fractional amount of the wear using conventional polyethylene. Significant differences were observed for particle morphology but not for the number of particles when comparing non-crosslinked and crosslinked polyethylene. [ABSTRACT FROM AUTHOR]

A German couple was struck by lightning. Both patients survived this event. Whereas the husband was unconscious for only a few minutes, his wife fell into coma for 24 h. The lightning stroke entered the body of the woman behind the left ear and left it at the left shoe. The stroke caused a partial evaporation of a gold ornamental chain on the neck, resulting in a tattoo of the neck skin. A biopsy of the skin 6 months after the event showed the accumulation of gold particles of different size in the dermis down to the subcutaneous fatty tissue. In semithin sections, histiocytes, multinucleated foreign giant cells, and fibroblasts were visible with uptaken metallic particles. In transmission electron microscopy, gold globules of up to 30 µm in diameter were visible outside the cells in the collageneous matrix of the connective tissue besides smaller metallic particles up to 5 nm inside lysosomes and residual bodies of phagocytic cells. Four different kinds of gold particles could be differentiated: globules, granular irregular particles, tubules, and tanglelike tracks. In scanning electron microscopy, gold particles were demonstrated by backscatter detection in the connective tissue of subcutis, where the EDX elemental analysis showed strong signals of aurum (Au), copper (Cu), and argentum (Ag). The detected metals were quantified by AAS as 70% gold, 21% silver, and 9% copper, which demonstrates the composition of gold alloy of the neck chain of the patient. Tanglelike tracks and elongated gold deposits represent crystals of gold salts, as detected by electron diffraction and polarization microscopy. Attempts to remove the gold particles from the skin to remove the tattoo should not be undertaken because the gold is deep and widespread. [ABSTRACT FROM AUTHOR]

The organotin compound di-n-butyltin dichloride (DBTC) is able to induce an acute and later a chronic pancreatitis in rats. In previous papers the authors demonstrated this DBTC pancreatitis as a rat model for an interstitial pancreatitis with tendency to transduction to the chronic form. DBTC is excreted according to its lipophilic nature by liver and bile. Therefore, the bilio-pancreatic main duct is necrotized by the tin-loaded bile. The duct system is blocked by cell debris and later by epithelial proliferations. In the chronic phase, numerous rats develop concrements in the main duct. In the present paper, the authors report about bacterial growth in some bilio-pancreatic concrements. Whereas the electron microscopic detection of tin by energy-dispersive X-ray analysis (EDX) in SEM or electron energy loss spectroscopy (EELS) in TEM was negative in the parenchyma of pancreas and liver, some concrements with bacterial cells were positive for this element. Tin mapping with energy spectroscopic imaging (ESI) in TEM demonstrated the congruency of tin signals and electron-dense particles inside these bacteria and of electron-dense accumulations in the matrix of these concrements. The low content of tin in pancreatic and liver tissue and the higher quantity of tin inside the bacterial contaminated concrements were supported by atomic absorption spectrophotometry (AAS). The paper discusses the long time preservation of tin in the concrements as an action of heavy-metal-accumulating bacteria, which should be classified in the future by bacteriological methods. [ABSTRACT FROM AUTHOR]

A 14-year-old girl demonstrated increased iron concentration and transferrin saturation, suggesting iron overload of unknown origin. Liver biopsy showed no fibrosis or hepatocytic atrophia. Nevertheless, Prussian blue reaction for histochemical detection of iron demonstrated very weak positive granules in a few hepatocytes on the periphery of hepatic lobules in close connection to bile capillaries. This very early stage of hemochromatosis was confirmed by TEM and EELS for iron accumulation inside hepatocytic lysosomes and residual bodies. Such siderosomes were scarce in number and iron content, compared to a case of manifested hemochromatosis and liver cirrhosis (Jonas L, Fulda G, Salemeh T, et al. Ultrastruct Pathol. 2001; 25: 111-118.). Liver iron concentration as measured by inductively coupled plasma-mass spectrometry (ICP-MS) and atomic absorption spectrometry (AAS) yielded 2.005 mg/g tissue dry weight, which was considered not significantly increased. In the absence of known causes for secondary iron overload, the early diagnosis was evidenced by genotyping, revealed homozygosity for the HFE gene C282Y mutation, demonstrating the presence of hereditary hemochromatosis. [ABSTRACT FROM AUTHOR]

Twelve patients underwent an osteosynthesis with titanium to treat upper and lower jaw fractures. Six to 12 months later, the miniplates were removed. Tissue samples were analyzed by light and electron microscopy for detection of a metallosis. The analysis showed new bone formation like callus tissue around the miniplates. In some cases small, rounded deposits and accumulation of colloid-like particles located next to bigger titanium artifacts were detected in the cytoplasm of histiocytes and in the matrix of connective tissue. The titanium was identified by elemental analysis using EDX in SEM as well as by EELS and electron diffraction in TEM. Both kinds of particles contain titanium, but they seem to be different in composition and derivation. The bigger particles seem to consist of metallic titanium and sourced by working on the metallic implants during the implantation itself. On the other hand, the colloidal-like, small, rounded particles in tissue macrophages and outside the cells in the matrix of connective tissue are presumably of other origin; for example, they could be derived from biodegradation and chemical conversion of the metallic implants. The titanium miniplates were examined before and after implantation by using ESCA technique and revealed metallic titanium and different compositions with other elements. The amount of titanium load of the tissue was very low in most cases and presumably not of biomedical relevance. [ABSTRACT FROM AUTHOR]

A 20-year-old male patient with morbus Wilson was liver transplanted because of terminal failure of liver function. The explanted liver showed a strong macronodular cirrhosis as typically seen in Wilson disease. There were visible granular accumulations in the hepatocytes after the rubeanic acid or rhodanine method for histochemical detection of copper. The electron microscopic studies on ultrathin sections revealed numerous electron-dense lysosomes and residual bodies. The elemental analysis in transmission electron microscope (TEM) with electron energy loss spectroscopy (EELS) and in scanning electron microscope (SEM) with energy dispersive x-ray analysis (EDX) showed copper-specific signals of electron-dense accumulations inside these dark lysosomes and residual bodies. In a second case, Wilson disease was diagnosed after autopsy of a 31-year-old patient by liver electron microscopy and EELS; strong electron-dense lysosomes and residual bodies with positive copper signals were found inside hepatocytes. For negative control, hepatocytes with iron accumulation after idiopathic hemochromatosis and liver cirrhosis were also analyzed by EELS in TEM, which showed strong iron, but only a few or no copper signals. Atomic absorption spectroscopy (AAS) in 16 liver samples of healthy and cirrhotic liver revealed only in both cases of Wilson disease a strong increased copper concentration higher than 100 µg Cu/g. The electron microscopic detection of copper-containing hepatocytic lysosomes is helpful for the diagnosis of early stages of Wilson disease in addition to the quantification of hepatic copper by AAS. [ABSTRACT FROM AUTHOR]