Search

This article establishes the bases for a vacuum and plasma supported methodology for the fabrication at mild temperatures of nanostructured platinum in the form of porous layers and nanocolumns using platinum octaethylporphyrin as precursor. In addition, the application of these materials as tunable optical filters and nano-counterelectrodes is proved. On one hand, the transparency in the ultraviolet-visible-near infrared range can be adjusted precisely between 70% and 1% by tuning the deposition and processing conditions, obtaining a high spectral planarity. Deviations of the spectra from an ideal flat filter are below 4%, paving the way to the fabrication of neutral density filters. The transparency limit values yield a sheet resistivity of ≈1350 and 120 Ω □−1, respectively. On the other hand, the catalytic properties of the nanostructures are further demonstrated by their implementation as counterelectrodes of excitonic solar cells surpassing the performance of commercial platinum as counterelectrode in a 20% of the overall cell efficiency due to simultaneous enhancement of short-circuit photocurrent and open-circuit photovoltage. One of the most interesting features of the developed methodology is its straightforward application to other metal porphyrins and phthalocyanines readily sublimable under mild vacuum and temperature conditions. [ABSTRACT FROM AUTHOR]

In this paper the fabrication of highly porous 1D nanostructures by a vacuum and plasma etching combined protocol is presented. Zn-phthalocyanine (ZnPc) is utilized as a solid precursor to form the ZnO. First the ZnPc is sublimated in low argon pressure. Depending on the substrate temperature and microstructure, polycrystalline films or single crystal ZnPc nanowires are grown. These starting materials are then subjected to a remote plasma oxidizing treatment. Experimental parameters such as substrate position, plasma power, treatment duration, and substrate temperature determine the microstructure and properties of the final ZnO nanostructures. The article gathers an in depth study of the obtained porous nanostructured films following scanning and transmission electron microscopy (SEM and TEM), X-ray photoelectron spectroscopy (XPS), X-ray Diffraction (XRD), UV-Vis transmittance, and fluorescence spectroscopies. [ABSTRACT FROM AUTHOR]

Platinum layers show a superior catalytic performance as counterelectrodes in dye‐sensitized solar cells. Combined vacuum and plasma processing of Pt‐porphyrin opens a versatile route for the development of nanostructured platinum including two‐dimensional extended percolated layers and one‐dimensional porous nanocolumnar films. This is demonstrated by Juan Ramon Sanchez‐Valencia, Ana Borras, and co‐workers in article number 1601233. [ABSTRACT FROM AUTHOR]

Front Cover: Nowadays, highly porous ZnO materials play a key role as nanosensors, solar cells, photonics devices and photo‐catalysts. The protocol developed in this work combines physical vapour deposition and remote plasma etching using Zn‐phthalocyanine as vacuum processable precursor for foam‐like layers and 1D nanostructures. The methodology for the fabrication of ZnO nanostructures is straightforwardly extensible to an ample range of porous metal oxides just selecting the metal‐phthalocyanine/porphyrin sublimable precursors. Further details can be found in the article by Maria Alcaire et al. on page 287. [ABSTRACT FROM AUTHOR]