Search

In recent years, stimulus-sensitive drug delivery systems have been developed for parenteral administration as a depot system. In situ systems incorporate smart polymers that undergo a phase transition at the site of administration. All parenteral and ocular dosage forms must meet sterility requirements. Careful selection of the sterilization method is required for any type of stimuli-sensitive system. Current sterilization methods are capable of altering the conformation of polymers or APIs to a certain extent, ultimately causing the loss of pharmacological and technological properties of the drug. Unfortunately, the issues of risk assessment and resolution regarding the sterilization of stimuli-sensitive systems, along with ways to stabilize such compositions, are insufficiently described in the scientific literature to date. This review provides recommendations and approaches, formulated on the basis of published experimental data, that allow the effective management of risks arising during the development of in situ systems requiring sterility. [ABSTRACT FROM AUTHOR]

Recently, ribavirin has demonstrated effectiveness in treating glioblastoma through intranasal administration utilizing the nose-to-brain delivery route. Enhancing ribavirin's bioavailability can be achieved by utilizing intranasal stimuli-responsive systems that create a gel on the nasal mucosa. The research examined thermosensitive, pH-sensitive, and ion-selective polymers in various combinations and concentrations, chosen in line with the current Quality by Design (QbD) approach in pharmaceutical development. Following a thorough assessment of key parameters, the optimal composition of gellan gum at 0.5%, Poloxamer 124 at 2%, and purified water with ribavirin concentration at 100 mg/mL was formulated and subjected to in vivo testing. Through experiments on male rats, the nose-to-brain penetration mechanism of the active pharmaceutical ingredient (API) was elucidated, showcasing drug accumulation in the olfactory bulbs and brain. [ABSTRACT FROM AUTHOR]

Mammalian hibernators survive prolonged periods of cold and resource scarcity by temporarily modulating normal physiological functions, but the mechanisms underlying these adaptations are poorly understood. The hibernation cycle of thirteen-lined ground squirrels (Ictidomys tridecemlineatus) lasts for 5–7 months and comprises weeks of hypometabolic, hypothermic torpor interspersed with 24–48-h periods of an active-like interbout arousal (IBA) state. We show that ground squirrels, who endure the entire hibernation season without food, have negligible hunger during IBAs. These squirrels exhibit reversible inhibition of the hypothalamic feeding center, such that hypothalamic arcuate nucleus neurons exhibit reduced sensitivity to the orexigenic and anorexigenic effects of ghrelin and leptin, respectively. However, hypothalamic infusion of thyroid hormone during an IBA is sufficient to rescue hibernation anorexia. Our results reveal that thyroid hormone deficiency underlies hibernation anorexia and demonstrate the functional flexibility of the hypothalamic feeding center. Hibernating ground squirrels have negligible hunger despite a months-long period of food deprivation and cold exposure. Here, authors show that prolonged anorexia is enabled by inhibition of the hypothalamic feeding center due to central hypothyroidism. [ABSTRACT FROM AUTHOR]

Liquid fuel production from biomass-derived molecules has received great attention due to the diminished fossil fuel reserves, growing energy demand, and the necessity of CO2 emission reduction. The deoxygenation of oils and fatty acids is a promising process to obtain "green" diesel. Herein, we report the results of the study of the deoxygenation of stearic acid to alkanes as a model reaction. Series of Ni-supported on schungite were obtained by precipitation in subcritical water (hydrothermal deposition) and for comparison via wetness impregnation followed, in both cases, by calcination at 500 °C and a reduction in H2 at 300 °C. The catalyst obtained via hydrothermal synthesis showed a three-fold higher specific surface area with a four-fold higher active phase dispersion compared to the catalysts synthesized via conventional impregnation. The catalysts were tested in stearic acid deoxygenation in supercritical n-hexane as the solvent. Under optimized process conditions (temperature of 280 °C, hydrogen partial pressure of 1.5 MPa, and 13.2 mol of stearic acid per mol of Ni), a close to 100% yield of C10–C18 alkanes, containing over 70 wt.% of targeted n-heptadecane, was obtained after 60 min of reaction. [ABSTRACT FROM AUTHOR]

The rapid growth in the prevalence of infectious diseases requires timely action from drug developers. In recent years, the COVID-19 pandemic has demonstrated the unpreparedness of the population for such emergencies. The introduction of modern methods of Design of Experiments (DoE) is required to accelerate the process of drug development and bring a drug to market. The main objective of this study was to develop an ion-triggered in situ system for intranasal delivery of VLP using a Quality by Design approach. Based on a literature review and initial studies, the key QTPP, CQA, CPP, and CMA were identified to develop a novel delivery system for virus-like particles. As a result of the studies on the quality attributes of the developed delivery system, an ion-triggered in situ gel meeting all the specified parameters was obtained using the Quality by Design method. [ABSTRACT FROM AUTHOR]

The oxidation of the Be/Al and Al/Be bilayer thin film systems deposited by magnetron sputtering have been studied by photoelectron spectroscopy and transmission electron microscopy. Both systems are oxidized according to the Cabrera–Mott model in the air. A Be/BeO/Al/Al2O3 structure is formed, with aluminium represented as localized nanocrystals. The thickness of the beryllium in the Al/Be system and the formed beryllium oxide is not enough to prevent the diffusion of aluminium ions under the influence of the Mott potential, and as a result, the surface layer is a mixture of beryllium and aluminium oxides. The effect of oxidation processes on the intermixing of non-interacting metals in a bilayer nanostructure has been shown for the first time. Annealing of the Be/Al bilayer leads to beryllium diffusion to the surface and the reduction of aluminium oxide, which leads to the destruction of the bilayer structure. In the Al/Be system in the range up to 200 °C, additional beryllium oxide is formed with increasing temperature, and the rest of the metallic beryllium diffuses into the aluminium layer. Based on studies, we conclude that multilayer Al/Be nanostructures have potentially low thermal stability, which requires the use of barrier layer techniques to limit interdiffusion. [ABSTRACT FROM AUTHOR]

In modern pharmaceutical technology, modified-release dosage forms, such as in situ formed implants, are gaining rapidly in popularity. These dosage forms are created based on a configurable matrix consisting of phase-sensitive polymers capable of biodegradation, a hydrophilic solvent, and the active substance suspended or dissolved in it. The most used phase-sensitive implants are based on a biocompatible and biodegradable polymer, poly(DL-lactide-co-glycolide) (PLGA). Objective: This systematic review examines the reasons for the phenomenon of active ingredient "burst" release, which is a major drawback of PLGA-based in situ formed implants, and the likely ways to correct this phenomenon to improve the quality of in situ formed implants with a poly(DL-lactide-co-glycolide) matrix. Data sources: Actual and relevant publications in PubMed and Google Scholar databases were studied. Study selection: The concept of the review was based on the theory developed during literature analysis of 12 effectors on burst release from in situ forming implants based on PLGA. Only those studies that sufficiently fully disclosed one or another component of the theory were included. Results: The analysis resulted in development of a systematic approach called the "12 Factor System", which considers various constant and variable, endogenous and exogenous factors that can influence the nature of 'burst release' of active ingredients from PLGA polymer-based in situ formed implants. These factors include matrix porosity, polymer swelling, LA:GA ratio, PLGA end groups, polymer molecular weight, active ingredient structure, polymer concentration, polymer loading with active ingredients, polymer combination, use of co-solvents, addition of excipients, and change of dissolution conditions. This review also considered different types of kinetics of active ingredient release from in situ formed implants and the possibility of using the "burst release" phenomenon to modify the active ingredient release profile at the site of application of this dosage form. [ABSTRACT FROM AUTHOR]

Implantation is a modern method of administering chemotherapeutic agents, with a highly targeted effect and better patient tolerance due to the low frequency of administration. Implants are capable of controlled release, which makes them a viable alternative to infusional chemotherapy, allowing patients to enjoy a better quality of life without the need for prolonged hospitalization. Compared to subcutaneous implantation, intratumoral implantation has a number of significant advantages in terms of targeting and side effects, but this area of chemotherapy is still poorly understood in terms of clinical trials. At the same time, there are more known developments of drugs in the form of implants and injections for intratumoral administration. The disadvantages of classical intratumoral implants are the need for surgical intervention to install the system and the increased risk of tumor rupture noted by some specialists. The new generation of implants are in situ implants—systems formed in the tumor due to a phase transition (sol–gel transition) under the influence of various stimuli. Among this systems some are highly selective for a certain type of malignant neoplasm. Such systems are injected and have all the advantages of intratumoral injections, but due to the phase transition occurring in situ, they form depot forms that allow the long-term release of chemotherapeutic agents. [ABSTRACT FROM AUTHOR]

Simple Summary: This study provides an example of the creation of a biobank of drone sperm of specific subspecies of Apis mellifera L. For subspecies identification, morphometric ("classical morphometry") and genetic (tRNAleu-COII mtDNA and nine SSR markers) methods were used. A honey solution was used as a cryopreservative. It was shown that the main values of frozen–thawed sperm decreased compared to those of fresh sperm. However, the use of honey in sperm cryopreservation has great potential. The cryopreservation of gametes and embryos is an important element of biodiversity conservation. One species in need of conservation is the honey bee Apis mellifera L. Changing environmental factors, especially the anthropogenic factor, have led to a reduction in the numbers of this insect species. In this study, we provide an example of the creation of a biobank of honey bee drone sperm. For sperm cryopreservation, drones of the most common subspecies of honey bees common in Russia were selected. These were the dark forest bee, Apis mellifera mellifera, from the Republic of Bashkortostan, with three subspecies (A. m. carnica, A. m. carpatica, and A. m. caucasica) from the southern regions of Russia, as well as two breeding stocks, the Far Eastern bee and Prioksky bee. For subspecies identification, morphometric and genetic methods were used. The subspecies of the studied samples were confirmed via the analysis of the tRNAleu-COII locus of mitochondrial DNA and nine microsatellite markers of nuclear DNA. It was shown that bees of the Prioksky breeding stock belong to the subspecies A. m. caucasica based on phylogenetic analysis, and the Far Eastern breeding stock is a stable hybrid, descending on the maternal line from the evolutionary lineage C or O. The results of the morphometric analysis are consistent with the results of the genetic analysis. For the cryopreservation of sperm, we used a cryoprotectant solution with honey. As a result, the viability of frozen–thawed sperm decreased by 20.3% compared to fresh sperm, and overall motility decreased 25-fold. The measurement of the sperm concentration in the spermatheca of artificially inseminated queens showed that it varied from 0.22 to 4.4 million/μL. Therefore, the use of honey in sperm cryopreservation has great potential. [ABSTRACT FROM AUTHOR]

Using the advanced analyses of electron density and fermionic potential, we show how electron delocalization influences the ability of defect-containing graphene to form tetrel bonds. The Cg atoms of a vacancy defect can produce one nonpolar interaction, alongside a peculiar polar Cg⋯Cg bond. The latter stems from the presence of a localized electron pair on a vacancy defect Cg atom and the local depletion of electron localization on another Cg atom. This interaction is an example of intralayer tetrel bond. In the presence of an absorbed molecule of bisphenol A diglycidyl ether (DGEBA), graphene is able to form incipient tetrel Cg⋯O bonds with an ether group oxygen. In contrast to an epoxy group oxygen, the disposition of the ether oxygen often causes the orientation of electron-rich π-domains of graphene carbon on the weakly expressed electrophilic region of the oxygen. In the case of graphene with a point Si defect, the Si atom can form quite strong Si⋯C interactions with the DGEBA aryl carbons. In contrast to other noncovalent bonds, this interaction significantly alters the electron (de)localization on the Si atom and in the aryl ring. The reliability of the obtained results is enhanced by the use of multiple 2D periodic models with defects located at different positions along the DGEBA skeleton. [ABSTRACT FROM AUTHOR]

Single phase CuCoMgAl-layered hydroxides were obtained by making fine adjustment to their composition through changing the (Co + Cu)/Mg = 0.5; 1; 2; 3 and Co/Cu = 0.5; 1; 2 ratios. The rise of Co/Cu in systems contributed to the increase in their thermal stability. CuCoMgAl-catalysts showed high selectivity of carbonyl group hydrogenation in furfural and 5-hydroxymethylfurfural. In furfural hydrogenation, the selectivity to furfuryl alcohol was more than 99%, and in 5-hydroxymethylfurfural hydrogenation, the selectivity to 2,5-hydroxymethyl furfural was 95%. The surface of the samples with different Co/Cu after calcination and reduction was the same and had a «core-shell» structure (TEM). «Core» consisted of Cu and Co metallic particles. «Shell» consisted of CuCoMgAlOx mixed no-stoichiometric spinel oxides. There was no sintering or change in size of the metallic particles after the reaction. For the sample with Co/Cu = 1, their phase composition after reaction remained unchangeable. The increase of Co/Cu led to the formation of an X-ray amorphous phase after the reaction. This suggests the decrease in structural stability of this sample. The obtained results prove the prospects of using bimetallic CoCu-systems for hydrogenation of furan aldehydes, and opens up new directions for further research and improvement. [ABSTRACT FROM AUTHOR]

The main method of treatment and prevention of endophthalmitis is a combination of intravitreal and topical administration of antibiotics, such as cefuroxime moxifloxacin or vancomycin. However, this method is ineffective due to the rapid elimination of the drug. This problem can be solved with the help of intravitreal in situ injection systems, which are injected with a syringe into the vitreous body and provide prolonged action of the drug at the focus of inflammation. Under the influence of temperature, the liquid drug undergoes a phase transition and turns into a gel after injection. This ensures its prolonged action. The study aimed to develop an intravitreal in situ cefuroxime delivery system for the treatment of endophthalmitis based on a thermosensitive biodegradable composition of poloxamer 407 and hyaluronic acid. A combination of poloxamer Kolliphor® P407, Kolliphor® P188, and PrincipHYAL® hyaluronic acids of different molecular weights was used as a delivery system. The potency of cefuroxime solid dispersion with polyvinylpyrrolidone-10000, polyethylene glycol-400, and polyethylene glycol-1500 in a 1:2 ratio was studied for prolonged action compared to cefuroxime substance. The experimental formulations were studied for the parameters of gelation temperature in a long-term test (4 months), pH, and release of cefuroxime using dialysis bags. To study the distribution parameter in the vitreous body, an in vitro model (1/13) was developed, which was a hollow agar sphere filled with 1% (w/v) polyacrylate gel. For the superior formulations, a HET-CAM test (chorioallantoic membrane test) was performed to determine the absence of irritant effects. According to the study results, a formulation containing a solid dispersion of cefuroxime:PEG-400 (1:2), the matrix of which contained 18% (w/v) Kolliphor® P407 poloxamer, 3% (w/v) Kolliphor® P188 poloxamer, and 0.5% (w/v) hyaluronic acid (1400–1800), was selected. This sample had an average gelation temperature of 34.6 °C, pH 6.7 ± 0.5, and a pronounced prolonged effect. Only 7.6% was released in 3 h of the experiment, whereas about 38% of cefuroxime was released in 72 h. No irritant effect on the chorioallantoic membrane was observed for any formulations studied. [ABSTRACT FROM AUTHOR]

We introduce a fermionic potential,vf, as a comprehensive measure of electron (de)localization in atomic‐molecular systems. Unlike other common descriptors as ELF, LOL, etc., it characterizes all physical effects responsible for (de)localization of electrons, namely: an exchange hole depth, its tendency to change, a sensitivity of an exchange correlation hidden in a pair density and kinetic potential to local variations in electron density. Wells in the vf distribution correspond to the domains of maximum electron localization, while the potential's barriers prevent delocalization of electrons through them. It also estimates bond orders and successfully reveals the impact of chemical modifications or environmental effects on the delocalization of electrons in molecules and crystals. The vf components provide a unique opportunity to compare the influence of the mentioned physical effects on electron (de)localization. This merges physical and chemical views of electron delocalization using functions appearing in density functional theory. [ABSTRACT FROM AUTHOR]

This study presents a systematic review of research on teaching science to children with disabilities, highlighting the significance of providing a high-quality science education to promote equity and inclusion. Science education enables students to investigate the natural world, cultivate critical thinking, and solve problems. Teaching science to children with disabilities presents unique challenges, including diverse learning requirements, the availability of resources, and effective teaching practices. This review seeks to investigate the Scopus database's literature, identify patterns, trends, and knowledge gaps, and identify potential areas for future research, ultimately contributing to a more inclusive, scientifically driven society. Initial screening of 420 publications based on predetermined criteria resulted in the selection of 50 publications. 18 publications were declared appropriate for inclusion in the study after a thorough review of their full texts. This qualitative research study conducted an in-depth examination and content analysis of selected articles to identify research-relevant themes. The studies were categorized under four major headings based on their interventions and practices, allowing for a thorough comprehension and comparison of the various approaches and strategies utilized. Various studies have examined the effectiveness of technological tools, approaches, and strategies to improve science and related subject learning outcomes for children with disabilities, according to their findings. The research highlights the significance of adapting pedagogical strategies and materials to the unique circumstances of each student and employing a variety of research methodologies to gain insight into diverse educational settings. Researchers can refine educational practices by customizing educational interventions and employing multiple data collection instruments, thereby ensuring inclusive and productive learning experiences for all students. [ABSTRACT FROM AUTHOR]

Summary: Wiskott–Aldrich syndrome (WAS) is an X‐linked recessive disorder caused by WAS gene mutations resulting in haematopoietic/immune cell defects. Recent studies report accelerated death of WAS platelets and lymphocytes. Data on megakaryocyte (MK) maturation, viability and their possible role in thrombocytopenia development in WAS are limited. In this study we evaluate the MK viability and morphology in untreated, romiplostim‐treated WAS patients compared with normal controls. The study included 32 WAS patients and 17 healthy donors. MKs were captured from bone marrow aspirates by surface‐immobilized anti‐GPIIb‐IIIa antibody. Viability (by phosphatidylserine [PS] externalization), distribution by maturation stages and size of MK were determined by light microscopy. MK distribution by maturation stages in patients differed from controls. 40 ± 22% of WAS MKs versus 23 ± 11% of normal MKs were at maturation stage 3 (p = 0.02), whereas 24 ± 20% in WAS and 39 ± 14% in controls had megakaryoblast morphology (p = 0.05). Romiplostim treatment changed the MK maturation stages distribution close to normal. PS‐positive (PS+) MK in WAS was significantly higher (21 ± 21%) than in healthy controls (2 ± 4%, p < 0.01). WAS patients with more damaging truncating mutations and higher disease score had higher PS+ MK fraction (Spearman r = 0.6, p < 0.003). We conclude that WAS MKs have increased cell death tendency and changes in maturation pattern. Both could contribute to thrombocytopenia in WAS patients. [ABSTRACT FROM AUTHOR]

In the present work, we investigated the effect of light conversion using europium (Eu(III))-based photoconversion covers on the cultivation of agricultural plants and their resistance to stress conditions. Two types of europium nanoparticles were used. The first one was obtained from europium oxide (Eu2O3) by laser fragmentation. The second one was Eu3+:LaF3 nanocrystals obtained by hydrothermal-microwave treatment, the content of europium ions in which was 50% of the total amount of cations. Tomatoes (Solanum lycopersicum) and cucumbers (Cucumis sativus) were used as model plants. It was shown that plants grown under cover with Eu2O3 (PCC-Eu2O3) were 30–40% larger, gave a higher yield, and the activation of gas exchange processes and the light phase of photosynthesis in the leaves in response to the lighting was faster. On the contrary, plants grown under cover with Eu3+:LaF3 (PCC-Eu3+:LaF3) tended to slow down the rate of biomass accumulation and decrease the rate of gas exchange activation. It was shown that photoconversion covers change the resistance of plants to stress conditions: if plants grown under PCC-Eu2O3 became more sensitive to heat (+40 °C) and cold (+4 °C) treatment, then plants grown under PCC-Eu3+:LaF3 became more resistant to high and low temperatures. It was found that PCC-Eu2O3 inhibited the development of the phytopathogen Phytophthora infestans on tomato plants. It was assumed that changes in the illumination spectrum by the photoconversion covers cause both the activation of plant growth in the case of Eu2O3 and an increase in plant resistance in the case of Eu3+:LaF3 applications. [ABSTRACT FROM AUTHOR]

The work is aimed at studying the impact resistance of epoxy oligomer matrices (EO) modified with polysulfone (PSU) or polyethersulfone (PES) and glass fibers reinforced plastics (GFRP) based on them under low-velocity impact conditions. The concentration dependences of strength and fracture energy of modified matrices and GFRP were determined. It has been determined that the type of concentration curves of the fracture energy of GFRP depends on the concentration and type of the modifying polymer. It is shown that strength σ and fracture energy EM of thermoplastic-modified epoxy matrices change little in the concentration range from 0 to 15 wt.%. However, even with the introduction of 20 wt.% PSU into EO, the strength increases from 164 MPa to 200 MPa, and the fracture energy from 32 kJ/m2 to 39 kJ/m2. The effect of increasing the strength and fracture energy of modified matrices is retained in GFRP. The maximum increase in shear strength (from 72 MPa to 87 MPa) is observed for GFRP based on the EO + 15 wt.% PSU matrix. For GFRP based on EO + 20 wt.% PES, the shear strength is reduced to 69 MPa. The opposite effect is observed for the EO + 20 wt.% PES matrix, where the strength value decreases from 164 MPa to 75 MPa, and the energy decreases from 32 kJ/m2 to 10 kJ/m2. The reference value for the fracture energy of GFRP 615 is 741 kJ/m2. The maximum fracture energy for GFRP is based on EO + 20 wt.% PSU increases to 832 kJ/m2 for GFRP based on EO + 20 wt.% PES—up to 950 kJ/m2. The study of the morphology of the fracture surfaces of matrices and GFRP confirmed the dependence of impact characteristics on the microstructure of the modified matrices and the degree of involvement in the process of crack formation. The greatest effect is achieved for matrices with a phase structure "thermoplastic matrix-epoxy dispersion." Correlations between the fracture energy and strength of EO + PES matrices and GFRP have been established. [ABSTRACT FROM AUTHOR]

Thermosensitive systems based on poloxamer 407 are widely used in targeted drug delivery; however, the stability of the phase transition temperature remains insufficiently studied. This article presents the results of a study on the effect of adding polyethylene glycols (PEG) with different molecular weights and some classical gel-forming polymers on the gelation temperature of thermoreversible compositions based on poloxamer 407 in a long-term experiment. The study showed a positive effect of PEG addition with average molecular weights at concentrations of 1.5–2.0%, as well as gelling agents at a concentration below the critical gelation concentration. The proposed rheological test for studying the samples' adhesion can give an indirect forecast of the composition adhesive rate. Based on the conducted studies, three experimental binary systems based on poloxamer 407 were selected, with the addition of HPMC 0.5%, sodium alginate 0.5%, and PEG 1500 1.5%. These systems are the most promising for the further development of in situ targeted drug delivery systems. [ABSTRACT FROM AUTHOR]

Radial increment objectively reflects the quality of the assimilation apparatus of a woody plant. Its features indicate the influence of various anthropogenic, biotic and abiotic factors as well as the stability of the plant under stress. The aim of this study was to survey the long-term dynamics of the radial growth of six tree species: Betula pendula, Ulmus glabra, Quercus robur, Tilia cordata, Picea abies and Pinus silvestris, depending on the impact of creating a reservoir and the fluctuations of the water level in it. Additionally, another aim was to determine whether there is a dependence between the annual radial increment of these tree species and the change in the temperature factor during the growing season. We studied cores of trees growing in a park on the coast of the Sheksna river, the level of which is regulated by the water level in the Rybinsk Reservoir and changes along with it. This research presents the dynamics of the annual radial growth of Betula pendula over 59 years, Ulmus glabra over 50 years, Quercus robur over 59 years, Tilia cordata over 82 years, Picea abies over 128 years and Pinus silvestris over 125 years. The average annual radial growth decreases in the series Ulmus glabra > Betula pendula, Quercus robur > Tilia cordata > Picea abies > Pinus silvestris. The radial increase does not correlate with the annual water level in the Rybinsk Reservoir. However, years with extreme minimum and maximum reservoir filling affect the radial growth of Quercus robur (r = 0.56) and Tilia cordata (r = 0.52). It was found that after the creation of the reservoir, the radial increment of Picea abies was significantly reduced by 1.10 mm. The clearest dependence of ring width index was obtained for Picea abies on temperature in May (r = −0.30 at p ≤ 0.05) and for Pinus sylvestris on temperature in July (r = −0.25 at p ≤ 0.05). Similarly, a weak correlation of ring width index with temperature in some months was noted for deciduous trees. Picea abies is notable for its particular display of moderate inverse correlation to the radial growths of other trees. [ABSTRACT FROM AUTHOR]

The authors have proposed the novel approach for evaluation of the self-healing effect in carbon fiber reinforced plastics (CFRP) on micro- and macro samples, using the dynamic mechanical analysis (DMA) and the double-cantilever beam delamination methods, respectively. A modified epoxy resin with a self-healing effect was used as the matrix for carbon plastics. The flexural modulus E' of microsamples with delamination and the specific delamination energy (crack resistance) GIR of macrosamples with a given initial crack were chosen as criteria for evaluating the self-healing of carbon plastics. The sensitivity of the E' and GIR parameters to the applied initial crack is shown. The value of the elastic modulus E' with the initial crack can be reduced up to two times compared to the E' values for the control materials, depending on the length of the initial crack. The degree of recovery of E' for CFRP with a microcrack varies from 91 to 118%. A high degree of healing could be achieved in 48 h. The GIR value of CFRP samples with a given macroseparation after heat treatment is 7% of the initial GIR value (0.7 kJ/m2). Recovery of delaminations for microsamples is more efficient than for macrosamples. The study of CFRP cracks by X-ray tomography before and after self-healing showed that the crack "overgrows" during the heat treatment cycle, and the defects (pores) formed during the manufacture of the sample decrease in size. [ABSTRACT FROM AUTHOR]

Pain therapy has remained conceptually stagnant since the opioid crisis, which highlighted the dangers of treating pain with opioids. An alternative addiction-free strategy to conventional painkiller-based treatment is targeting receptors at the origin of the pain pathway, such as transient receptor potential (TRP) ion channels. Thus, a founding member of the vanilloid subfamily of TRP channels, TRPV1, represents one of the most sought-after pain therapy targets. The need for selective TRPV1 inhibitors extends beyond pain treatment, to other diseases associated with this channel, including psychiatric disorders. Here we report the cryo-electron microscopy structures of human TRPV1 in the apo state and in complex with the TRPV1-specific nanomolar-affinity analgesic antagonist SB-366791. SB-366791 binds to the vanilloid site and acts as an allosteric hTRPV1 inhibitor. SB-366791 binding site is supported by mutagenesis combined with electrophysiological recordings and can be further explored to design new drugs targeting TRPV1 in disease conditions. Small molecules targeting transient receptor potential (TRP) channels might be used to control pain. Here, Neuberger et al. report cryo-EM structures of human TRPV1 in the absence of added ligands or in the presence of the TRPV1-specific antagonist SB-366791, providing insights for the design of new promising analgesics. [ABSTRACT FROM AUTHOR]

Palladium-containing ordered mesoporous carbons, such as CMK-1 and CMK-3 doped with nitrogen by pyrolysis of polyaniline and modified with an imidazolium ionic liquid ([BMIM][Br]) have been synthesized. The carriers and electrocatalysts have been studied by low-temperature nitrogen adsorption, thermogravimetric analysis, X-ray fluorescence analysis, and Raman spectroscopy. A significant decrease in the surface of CMK materials was shown upon doping with nitrogen and modifying with an ionic liquid. Moreover, the electrocatalytic activity in the oxygen reduction reaction from an alkaline electrolyte has been studied by the potentiometric method using a three-electrode cell with a rotating disk as working electrode. In addition, the diffusion currents, half-wave potentials, initial potentials, and the number of electrons participating in the reaction are calculated. The values of the electrochemical active surface of the synthesized catalysts were determined on the basis of cyclic voltammograms. Modification CMK-3_Pd with ionic liquid made it possible to increase the diffusion current, which was not observed upon doping with nitrogen. Catalysts CMK-3_Pd and CMK-3_Pd_IL showed high efficiency in the reaction under study. The number of electrons transferred during the electroreduction of oxygen on these catalysts is about 3.5; mass activity in the diffusion region at a potential of −0.8 V is about 0.7 A/mgPd; and it is almost two times higher than that of the commercial platinum Pt/C catalyst. In the kinetic region at a potential of −0.05 V, the specific activity of the platinum catalyst is significantly higher than that of CMK-3_Pd and CMK-3_Pd_IL. Mass activity in the kinetic region for CMK-3_Pd and CMK-3_Pd_IL is comparable to the activity of the Pt/C platinum catalyst. It was shown that the activity of materials based on CMK in the reaction of oxygen electroreduction from an alkaline electrolyte will depend not only on the size of the electrochemically active surface of the catalysts, but also on the textural characteristics of these materials. [ABSTRACT FROM AUTHOR]

Ni(Mg)Al-layered hydroxides with molar ratios of (Ni + Mg)/Al = 2, 3, 4 and Ni/(Ni + Mg) = 0.1, 0.3, 0.5, 0.7 were synthesized by mechanochemical activation. It has been proven that the phase composition of the samples was presented by a single hydrotalcite phase up to Ni/(Ni + Mg) = 0.5. For the first time, catalysts based on Ni(Mg)Al-layered hydroxides prepared by a mechanochemical route have been studied in the reaction of furfural hydrogenation. The correlation between furfural conversion, the selectivity of the products, and the composition of the catalysts was established. The effect of phase composition, surface morphology, and microstructure on the activity of the catalysts was shown by XRD, SEM, and TEM. It was found that catalysts with Ni/(Ni + Mg) = 0.5 have the highest furfural conversion. Herewith, the product selectivity can be regulated by the (Ni + Mg)/Al ratio. [ABSTRACT FROM AUTHOR]

Selective hydrogenation of 1-hexyne/1-hexene mixture was studied in the temperature range of 100–150 °C (hydrogen pressure of 3 atm) on a catalyst based on mesoporous silica gel (MPS) doped with dysprosium, lanthanum and modified with silver (Dy–Ag/MPS, La–Ag/MPS). The catalysts were studied by scanning electron microscopy, X-ray fluorescence, X-ray diffraction analysis, Fourier-transform infrared spectroscopy, temperature programmed reduction and inductively coupled plasma mass spectrometry. It was found that the conversions of 1-hexyne on Dy–Ag/MPS are higher than on La–Ag/MPS. Moreover, it has been shown that the Dy–Ag/MPS sample exhibits greater efficiency and selectivity for 1-hexene in the hydrogenation of a 1-hexyne/1-hexene mixture. In addition, it was shown that the selectivity of Dy–Ag/MPS for 1-hexene remains the same with an increase of 1-hexyne concentration in the mixture. [ABSTRACT FROM AUTHOR]

The current State of the Science Commentary focuses on workforce challenges in the nursing home (NH) setting that lie within the purview of professional nursing—what professional nurses can do to promote high-quality person-centered care within a context of existing resources—individually and broadly across the collective profession. Historically, three models of care delivery have characterized the way in which nursing care is organized and delivered in different settings: primary nursing, functional nursing, and team nursing. Based on the existing evidence, we call for scientific leadership in the redesign, testing, and implementation of a nursing care delivery model that operationalizes relationship-centered team nursing. This integrative model incorporates successful evidence-based approaches that have the potential to improve quality of care, resident quality of life, and staff quality of work life: clear communication, staff empowerment, coaching styles of supervision, and family/care partner involvement in care processes. In addition to the needed evidence base for NH care delivery models, it is imperative that educational programs incorporate content and clinical experiences that will enable the future nursing workforce to fill the leadership gap in NH care delivery. [Research in Gerontological Nursing, 16(1), 5–13.] [ABSTRACT FROM AUTHOR]

The article is devoted to the study of melted ingots, plates rolled from them, and the resulting spherical powder made of corrosion-resistant 316L steel with the addition of 0.2 wt.% and 0.5 wt.% Ag. The study of antibacterial properties, microstructure, and distribution of silver concentrations, as well as qualitative analysis of silver content was carried out. The optimal mode of homogenization annealing of the ingot was 1050 °C for 9 h, which leads to the formation of an austenitic structure. It is shown that the addition of a small amount of silver does not affect the formation of the austenitic structure and silver is distributed evenly throughout the volume of the ingot. The austenitic structure also prevails in the plates after rolling. Silver is distributed evenly throughout the entire volume of the plate. It is noted that the addition of 0.2 wt.% Ag does not affect the strength, elongation, and microhardness of steel, and the addition of 0.5 wt.% Ag does not significantly reduce the strength of steel, however, all samples meet the mechanical characteristics according to the ASTM A240 standard. The qualitative chemical composition of samples made of corrosion-resistant steels was confirmed by X-ray fluorescence analysis methods. By the method of energy-dispersion analysis, the presence of a uniform distribution of silver over the entire volume of the powder particle was determined. The particles have a spherical shape with a minimum number of defects. The study of the antibacterial activity of plates and powder shows the presence of a clear antibacterial effect (bacteria of the genus Xanthomonas campestris, Erwinia carotovora, Pseudomonas marginalis, Clavibacter michiganensis) in samples No. 2 and No. 3 with the addition of 0.2 wt.% and 0.5 wt.% Ag. [ABSTRACT FROM AUTHOR]

Here, we report the study results of the nitration of 3,7,10-trioxo-2,4,6,8,9,11-hexaaza[3.3.3]propellane (THAP) by different nitrating agents such as nitric acid, mixed nitric/sulfuric acids, nitric anhydride, and mixed concentrated nitric acid/acetic anhydride to furnish 3,7,10-trioxo-2-nitro-2,4,6,8,9,11-hexaaza[3.3.3]propellane and 3,7,10-trioxo-2,8-dinitro-2,4,6,8,9,11-hexaaza[3.3.3]propellane, whereas a lactam–lactim rearrangement was found to take place upon vigorous cooling to give 10-hydroxy-2,4,6,8,9,11-hexaazatricyclo[3.3.3.01,5]undec-9-ene-3,7-dione. The two competing reactions, lactam–lactim rearrangement, and nitration were found to take place. The acylation of 3,7,10-trioxo-2,4,6,8,9,11-hexaaza[3.3.3]propellane was examined and the formation conditions of 2,6-di- and 2,6,9-triacetyl-substituted and 3,7,10-trioxo-2,4,6,8,9,11-hexaacetyl-2,4,6,8,9,11-hexaaza[3.3.3]propellane were established. The acetyl derivatives were found to be instable in an acidic medium and to undergo deacylation. The obtained findings correlate well with the quantum-chemical calculations. [ABSTRACT FROM AUTHOR]

Here, we investigated the reaction of 1,3-dipolar cycloaddition of 1,3-diazido-2-nitro-2- azapropane (DANP) to propargyl alcohol over a copper-based catalyst and identified the optimum reaction conditions that enable the synthesis of 2-nitro-1,3-bis(4,4′-dihydroxymethyl)-1,2,3-triazolyl-2-azapropane (1) in more than 84% yield. The reaction between DANP, 1,5-diazido-3-nitrazapentane, and phenylacetylene produced the respective 1,2,3-triazole derivatives in 83% and 71% yields, respectively. The structures of the resultant compounds were validated by infrared and NMR spectroscopies and elemental analysis. The structure of 1 was proved by single-crystal X-ray diffraction. This study demonstrated that 1 exhibits a dose-dependent antiarrhythmic activity towards calcium-chloride-induced arrhythmia and refers to Class III: moderately hazardous substances. [ABSTRACT FROM AUTHOR]

Catalysts based on CuAl-, CoAl-, and CuCoAl-layered hydroxides with M2+/Al = 2 and Cu/Co = 1 molar ratio were obtained. The effect of amount of cobalt on the structural properties, morphology, surface cations distribution, oxide phase formation, thermal stability of the samples and reduction of metals from them was studied. The effect of reaction conditions (temperature, time, pressure, solvent) and conditions of preliminary treatment of catalysts on their catalytic properties in furfural hydrogenation was established. High selectivity to furfuryl alcohol was observed for all the samples irrespective of pretreatment and reaction conditions. The synergetic effect in furfural hydrogenation between Co and Cu in the CuCoAlOx catalysts was revealed when ethanol is used as a solvent. [ABSTRACT FROM AUTHOR]

The paper describes the production and study of spherical powder made from corrosion-resistant 316L steel with the addition of 0.2% and 0.5% Ag. The study of granulometric composition, morphology, fluidity and bulk density, phase composition, microhardness and impurity composition of the spherical powders was carried out. The study showed compliance of the spherical powders with the requirements for powders used for additive manufacturing. The fluidity of the powders was 17.9 s, and the bulk density was 3.76 g/cm3. The particles have a spherical shape with a minimum number of defects and an austenitic-ferritic structure. The study of the phase composition of ingots, wires and powders showed that the ingot structure of all samples consists of austenite. According to the results of studies of the phase composition of the wire, there is a decrease in γ–Fe and an increase in α–Fe and σ–NiCr in going from wire No. 1 to wire No. 3. According to the results of studies of the phase composition of the powder particles, there are three phases, γ-Fe, α-Fe, and Fe3O4. The study of microhardness showed a decrease in HV depending on the increase in silver. The hardness of the powder is lower than that of the ingot by 16–24% due to the presence of a ferritic phase in the powder. As a result of plasma spraying, an increase in residual oxygen is observed, which is associated with the oxidation of the melt during plasma dispersion. The amount of nitrogen and sulfur does not change, while the amount of carbon and hydrogen decreases, and the impurities content corresponds to the standards for corrosion-resistant steel. Qualitative and quantitative analysis of the silver content in the samples indicates that it was not affected by the stages involved in obtaining the spherical powder. [ABSTRACT FROM AUTHOR]

The selective hydrogenation of 1‐hexyne/1‐hexene mixture in the temperature range 100–140°C and a hydrogen pressure of 3 atm was studied on catalysts based on mesoporous silica gel modified with copper and mesoporous silica gel doped with dysprosium and modified with copper. The physicochemical characteristics of the samples were studied by low temperature nitrogen adsorption–desorption method, scanning electron microscopy (SEM), X‐ray fluorescence (XRF), and inductively coupled plasma mass spectrometry (ICP‐MS). In addition, theoretical calculations of the entropies and energies of formation of activated complexes of the hydrogenation reactions of 1‐hexyne and 1‐hexene in the gas phase have been calculated with Gaussian 09 software using the density functional theory (DFT) B3LYP/cc‐pVQZ method. It was found that the presence of dysprosium in the structure of mesoporous silica gel leads to an increase in catalytic activity in the hydrogenation of 1‐hexyne. Moreover, it was shown that mesoporous silica gel modified with copper has the highest selectivity for hexene‐1 in the hydrogenation reaction of 1‐hexyne/1‐hexene mixture at 130°C. [ABSTRACT FROM AUTHOR]

Cancer treatment and pharmaceutical development require targeted treatment and less toxic therapeutic intervention to achieve real progress against this disease. In this scenario, nanomedicine emerged as a reliable tool to improve drug pharmacokinetics and to translate to the clinical biologics based on large molecules. However, the ability of our body to recognize foreign objects together with carrier transport heterogeneity derived from the combination of particle physical and chemical properties, payload and surface modification, make the designing of effective carriers very difficult. In this scenario, physiologically based pharmacokinetic modeling can help to design the particles and eventually predict their ability to reach the target and treat the tumor. This effort is performed by scientists with specific expertise and skills and familiarity with artificial intelligence tools such as advanced software that are not usually in the "cords" of traditional medical or material researchers. The goal of this review was to highlight the advantages that computational modeling could provide to nanomedicine and bring together scientists with different background by portraying in the most simple way the work of computational developers through the description of the tools that they use to predict nanoparticle transport and tumor targeting in our body. [ABSTRACT FROM AUTHOR]

The red raspberry is one of the world's most popular berries. The main direction of its breeding has switched to nutritional quality, and the evaluation of raspberry germplasm for antioxidant content and activity is very important. As berries, raspberry leaves contain valuable bioactive compounds, but the optimal time for their collection is unknown. We evaluated 25 new breeding lines and standard raspberry cultivars for their polyphenolic content and antioxidant capacity. The antioxidant activity of berries correlated better with the content of total phenolics (0.88 and 0.92) and flavonoids (0.76 and 0.88) than with anthocyanins (0.37 and 0.66). Two breeding lines were significantly superior to the standard cultivars and can be used in further breeding. Leaves collected in three phenological phases of the raspberry contained more phenolics (5.4-fold) and flavonoids (4.1-fold) and showed higher antioxidant activities (2.4-fold in FRAP assay, 2.2-fold in ABTS) than berries. The optimal time for harvesting raspberry leaves is the fruit ripening stage, with exceptions for some cultivars. Genetic diversity analysis using microsatellite (SSR) markers from flavonoid biosynthesis genes divided the genotypes into five clusters, generally in agreement with their kinships. The relationship between genetic data based on metabolism-specific SSR markers and the chemical diversity of cultivars was first assessed. The biochemical and genetic results show a strong correlation (0.78). This study is useful for further the improvement of raspberry and other berry crops. [ABSTRACT FROM AUTHOR]

The integration of biofuel upgrading processes in the existing technologies of crude oil refining is considered to be one of the promising directions for the production of liquid motor fuels. In this work, the co-processing of bio-oil obtained from biomass waste and heavy oil fractions in the supercritical solvent was studied. The bio-oil was obtained by the slow pyrolysis of birch and pine wood sawdust in the presence of a Fe-containing zeolitebased catalyst. The influence of the catalyst on the yield and composition of liquid products was studied. To find the optimal reaction conditions, the co-processing of the model compounds (anisole - eicosane - dibenzothiophene) was carried out by varying the solvent, reaction temperature, and the initial nitrogen pressure. Full removal of oxygen and sulfur as well as a decrease in the concentration of heavy and polyaromatic compounds from the feedstock were observed under the following process parameters: solvent - propanol-2, reaction temperature - 260 °C, initial nitrogen pressure - 1.5 MPa, total pressure - 7.2 MPa. [ABSTRACT FROM AUTHOR]

A practical application composite based on mixed chelate complexes [M(S-Ala)2(H2O)n]–[M(S-Phe)2(H2O)n] (M = Cu(II), Zn(II); n = 0–1) as chiral selectors in enantioselective voltammetric sensors was suggested. The structures of the resulting complexes were studied by XRD, ESI-MS, and IR- and NMR-spectroscopy methods. It was determined that enantioselectivity depends on the metal nature and on the structure of the mixed complex. The mixed complexes, which were suggested to be chiral selectors, were stable under the experimental conditions and provided greater enantioselectivity in the determination of chiral analytes, such as naproxen and propranolol, in comparison with the amino acids they comprise. The best results shown by the mixed copper complex [Cu(S-Ala)2]–[Cu(S-Phe)2] were: ipS/ipR = 1.27 and ΔEp = 30 mV for Nap; and ipS/ipR = 1.37 and ΔEp = 20 mV for Prp. The electrochemical and analytical characteristics of the sensors and conditions of voltammogram recordings were studied by differential pulse voltammetry. Linear relationships between the anodic current and the concentrations of Nap and Prp enantiomers were achieved in the range of 2.5 × 10−5 to 1.0 × 10−3 mol L−1 for GCE/PEC-[Cu(S-Ala)2]–[Cu(S-Phe)2] and 5.0 × 10−5 to 1.0 × 10−3 for GCE/PEC–[Zn(S-Ala)2(H2O)]–[Zn(S-Phe)2(H2O)], with detection limits (3 s/m) of 0.30–1.24 μM. The suggested sensor was used to analyze Nap and Prp enantiomers in urine and plasma samples. [ABSTRACT FROM AUTHOR]

Traumatic brain injury (TBI) is a major public health problem. Here, we developed a novel model of non-invasive TBI induced by laser irradiation in the telencephalon of adult zebrafish (Danio rerio) and assessed their behavior and neuromorphology to validate the model and evaluate potential targets for neuroreparative treatment. Overall, TBI induced hypolocomotion and anxiety-like behavior in the novel tank test, strikingly recapitulating responses in mammalian TBI models, hence supporting the face validity of our model. NeuN-positive cell staining was markedly reduced one day, but not seven days, after TBI, suggesting increased neuronal damage immediately after the injury, and its fast recovery. The brain-derived neurotrophic factor (Bdnf) level in the brain dropped immediately after the trauma, but fully recovered seven days later. A marker of microglial activation, Iba1, was elevated in the TBI brain, albeit decreasing from Day 3. The levels of hypoxia-inducible factor 1-alpha (Hif1a) increased 30 min after the injury, and recovered by Day 7, further supporting the construct validity of the model. Collectively, these findings suggest that our model of laser-induced brain injury in zebrafish reproduces mild TBI and can be a useful tool for TBI research and preclinical neuroprotective drug screening. [ABSTRACT FROM AUTHOR]

The active centers of carbon catalysts doped with cobalt, nickel, copper, manganese, zinc, and chromium were modeled by density functional theory methods. Likewise, the thermodynamics of the oxygen reduction reaction (ORR) on model catalysts were determined. The features of the chemical properties of chromium-containing material, namely its spontaneous oxidation into the hydroxo form, were revealed. In addition, it was established that among the studied catalysts, graphene doped with cobalt showed the best properties. [ABSTRACT FROM AUTHOR]

The equilibrium between keto and enol forms in acetylacetone and its derivatives is studied using electron delocalization indices and delocalization tensor density. We demonstrate how electron delocalization governs the equilibrium between keto and enol forms. The less stable enols have more distinct double and single bond character in the CCC fragment, while electron delocalization in this fragment is more pronounced in more stable enols. Looking for the origin of such behavior, we considered the one‐electron potentials entering the Euler equation for the electron density. We found that electron delocalization is mainly governed by the static exchange potential, which depends on the three‐dimensional atomic structure. It, however, does not distinguish differences in electron delocalization in more and less stable enols, the effect arising from the kinetic exchange contribution, which reflects spin‐dependent effects in the electron motion. The local depletion of kinetic exchange in the conjugated fragment yields the enhanced electron delocalization along the CCC bonds in more stable enols. Thus, a combination of considered descriptors allowed us to reveal the influence of electron delocalization on the equilibrium between keto and enol forms and showed the significant features of this phenomenon. [ABSTRACT FROM AUTHOR]

Collaboration between licensed nurses (LNs) and nurse aides (NAs) is critical in the provision of quality care for residents living in nursing homes (NHs). The current scoping review explores how working dynamics between LNs and NAs in the NH setting are researched and described in the literature. Thirty-five articles were identified and reviewed that address the LN/NA relationship in the context of (a) the LN role as a supervisor and leader; (b) variation in structure; (c) expanding, understanding, and supporting staff roles; and (d) communication. We found that the LN/NA relationship has been primarily explored through the LN lens and often studied in the context of role expansion and revision associated with new models of care. Our contribution to the literature includes the following main points: efforts to improve LN/NA collaboration may be hindered without substantial structural change; collaboration may be limited within the hierarchal LN/NA relationship; LNs and NAs in NHs need greater support, recognition, and empowerment; and NAs require a representative voice. [ABSTRACT FROM AUTHOR]

The relevance of the study is based on the shift of activity of organized criminal groups involved in distribution of psychoactive substances to the organization of the mentioned activities through the Internet. One of the problems of counteracting such crimes is that in Ukraine, the mechanism of blocking or limiting access to Internet resources through which criminal offenses are committed or where there is prohibited content is regulated by law. The purpose of their search is to study current problems of combating drug trafficking on the Internet by way of contactless sale of narcotic drugs and psychotropic substances. It is necessary to strengthen the analytical component of law enforcement activities in the detection and analysis of content on the Internet through implementing information technologies and spreading knowledge of OSINT (Open-source intelligence). The results of the manuscript are of practical value for the average reader who is interested in the issues of financial crime, online crimes, and drug countering as well as for the higher education graduates of police specialties, police officers of the criminal block and specialists in the field of operational search activities. [ABSTRACT FROM AUTHOR]

Background and Aims Plant diseases caused by Pectobacterium atrosepticum are often accompanied by extensive rot symptoms. In addition, these bacteria are able to interact with host plants without causing disease for long periods, even throughout several host plant generations. There is, to date, no information on the comparative physiology/biochemistry of symptomatic and asymptomatic plant– P. atrosepticum interactions. Typical (symptomatic) P. atrosepticum infections are associated with the induction of plant responses mediated by jasmonates, which are one of the products of the lipoxygenase cascade that gives origin to many other oxylipins with physiological activities. In this study, we compared the functioning of the lipoxygenase cascade following typical and latent (asymptomatic) infections to gain better insight into the physiological basis of the asymptomatic and antagonistic coexistence of plants and pectobacteria. Methods Tobacco plants were mock-inoculated (control) or infected with the wild type P. atrosepticum (typical infection) or its coronafacic acid-deficient mutant (latent infection). The expression levels of the target lipoxygenase cascade-related genes were assessed by Illumina RNA sequencing. Oxylipin profiles were analysed by GC-MS. With the aim of revising the incorrect annotation of one of the target genes, its open reading frame was cloned to obtain the recombinant protein, which was further purified and characterized using biochemical approaches. Key Results The obtained data demonstrate that when compared to the typical infection, latent asymptomatic P. atrosepticum infection is associated with (and possibly maintained due to) decreased levels of 9-lipoxygenase branch products and jasmonic acid and increased level of cis -12-oxo-10,15-phytodienoic acid. The formation of 9-oxononanoic acid and epoxyalcohols in tobacco plants was based on the identification of the first tobacco hydroperoxide lyase (HPL) with additional epoxyalcohol synthase (EAS) activity. Conclusions Our results contribute to the hypothesis of the oxylipin signature, indicating that different types of plant interactions with a particular pathogen are characterized by the different oxylipin profiles of the host plant. In addition, the tobacco LOC107825278 gene was demonstrated to encode an NtHPL (CYP74C43) enzyme yielding volatile aldehydes and aldoacids (HPL products) as well as oxiranyl carbinols (EAS products). [ABSTRACT FROM AUTHOR]

The current mixed methods study explored how nursing team collaboration is perceived and experienced in four nursing homes (NHs) in the western United States. Licensed nurses (LNs) and certified nurse aides (CNAs) completed two survey tools to assess their perception of collaboration and team-work in their current work environment. LNs and CNAs were paired and interviewed individually and as a caregiving pair to explore the lived experience of collaboration in NH residents' care. Quantitative survey results were analyzed, and participants reported a collaborative working environment with equally strong ratings in the following categories: partnership, cooperation, and coordination; they agreed with statements reflective of teamwork, including team structure, leadership, situation monitoring, mutual support, and communication. No significant differences were found between LN and CNA responses or between team members in any of the four participating facilities. Qualitative survey data were analyzed using a thematic analysis approach. Findings revealed five primary themes, including essential elements in successful team collaboration—perspective, coworker connection, communication, mutual support, and "it makes a difference"—and ways teamwork and collaboration impact resident care. These findings provide rich insights into successful LN/CNA collaboration for academic and clinical LN and CNA educators. [Research in Gerontological Nursing, 15(1), 16–26.] [ABSTRACT FROM AUTHOR]