Search

Few studies have shown that radial artery (RA), which is used as a secondary arterial graft, offers superior results compared with right internal thoracic artery (RIMA) in coronary artery bypass grafting (CABG). In a meta‐analysis of observational studies starting in 2023, we looked at the effect of re‐operation on postoperative infection and haemorrhage in CABG with RA vs. RIMA. The electronic database up to October 2023 was examined in the course of the research. Analysis was carried out on the clinical trials of postoperative wound infections and haemorrhage re‐surgery. Among 912 trials associated with CABG, we selected 8 trials to be included in the final data analysis. The main results were secondary wound infection and re‐operation after surgery. The odds ratios (OR) and confidence intervals (CIs) were computed on the basis of a randomized or fixed‐effect model of wound infection and re‐operation. Seven trials showed a significant reduction in the risk of wound infection in RA treated as a secondary artery transplant compared with RIMA (OR, 1.60; 95% CI, 1.03, 2.47 p = 0.04); Four trials showed that RIMA was not significantly different from RA in the rate of re‐operation for postoperative bleeding (OR, 1.31; 95% CI, 0.60, 2.88 p = 0.50). In CABG, RA is used as a secondary arterial conduit graft to lower the risk of wound infection in CABG patients. [ABSTRACT FROM AUTHOR]

The developed karst caves may become the seepage channels of heavy metal to the soil and underground water in Southwest China. Therefore, it is necessary to apply effective seepage treatments to the base of heavy metal tailing reservoirs. This paper addressed the high-pressure rotary jet technology and slurry systems used in the seepage treatment of the deep tailing sand of the Shenxiandong tailing pond located in Southwest China. In this study, the factors of fluidity, initial and final setting times, compressive strength, and permeability coefficient of the slurry were conducted. The mechanism analysis was investigated by X-ray diffraction (XRD), scanning electron microscope (SEM), and inductively coupled plasma-mass spectrometry (ICP-MS). Three different types of slurry systems were proposed, and the permeability coefficients of the solidification body following 28 days of curing were less than 1 × 10−7 cm/s. The concentrations of Pb and Zn in the slurry system containing bentonite were reduced by 26.2% and 45.7%, respectively. In the presence of slaked lime and fly ash, the concentrations of Pb and Zn could be reduced by 26.8% and 30%, respectively. A total of 2142 high-pressure rotary jet piles were completed by the high-pressure rotary jet method in the field trial. The diffusion radius of these piles was over 1 m. Following 28 days of curing, the solidification body's compressive strength was 7.45 MPa and the permeability coefficient was 6.27 × 10−8 cm/s. Both the laboratory and on-site trials showed that this method produced a good pollution barrier effect, which could prevent the diffusion of heavy metal into the adjacent underground water through the karst caves. It is also an effective way of engineering technology concerning heavy metal pollution control that occurs in tailing ponds. [ABSTRACT FROM AUTHOR]

A novel two-layer structural thermal barrier coating (TBC) system with a ~150-µm-thick CoCrAlY bond coat (BC) and a ~60-µm-thick yttria stabilized zirconia (YSZ) ceramic top coat (TC) was prepared on superalloy K444 matrix using electron beam physical vapor deposition (EB-PVD). This deposited coating was characterized using isothermal oxidation tests (1000 °C × 200 h). The results indicated that the deposited coating had a dense structure and close bonding between the layers. The thermally grown oxide (TGO) layer (predominantly alumina) that formed at the interface between the TC and the BC as a consequence of the oxidation process was effective in preventing the further oxidation of the BC. In the later stages of the oxidation process, embedded oxides of chromium/cobalt were observed among the TC's columnar grains, and the TGO underwent densification thinning. Through observations of the growth behavior of the TGO, the element diffusion, displacement reaction, and volatilization of the oxides were found to be related to the weight loss in the coating and the densification thinning of the TGO. These coatings displayed superior high-temperature oxidation resistance properties. Copyright © 2014 John Wiley & Sons, Ltd. [ABSTRACT FROM AUTHOR]

A novel sodium-promoted Fe-Co/NC catalyst prepared by incipient-wet-impregnation method using ZIF-67 as a support was employed to convert CO2 to light olefins through hydrogenation reaction. Properties of the synthesized catalysts calcinated at various temperatures (from 400 to 700 °C) were investigated by XRD, SEM, TEM and Mӧssbauer spectroscopy. Characterization results showed that the support could be fully converted into carbon support above 500 °C, which could anchor metal particles, thus resulting in a uniform dispersion of active components. Furthermore, the Fe-Co alloy was formed during N2 calcination, and was converted into active components, such as Fe3O4, Fe5C2, and Co2C during the reaction. The reaction result indicated that FeCo/NC-600 catalyst exhibited the highest selectivity of light olefins (C2= − C4=, 27%) and CO2 conversion could reach around 37% when this catalyst pyrolyzed at 600 °C in N2. The highest selectivity for light olefins may be related to the combination of suitable particle size and sufficient active sites of iron carbide. [ABSTRACT FROM AUTHOR]