Search

In this work, poly-ε-caprolactone samples are modified by an atmospheric pressure plasma jet in pure argon and argon/water vapour mixtures. In a first part of the paper, the chemical species present in the plasma jet are identified by optical emission spectroscopy and it was found that plasmas generated in argon/0.05 % water vapour mixtures show the highest emission intensity of OH (A-X) at 308 nm. In a subsequent section, plasma jet surface treatments in argon and argon/water vapour mixtures have been investigated using contact angle measurements and X-ray photoelectron spectroscopy. The polymer samples modified with the plasma jet show a significant decrease in water contact angle due to the incorporation of oxygen-containing groups, such as C-O, C=O and O-C=O. The most efficient oxygen inclusion was however found when 0.05 % of water vapour is added to the argon feeding gas, which correlates with the highest intensity of OH (X) radicals. By optimizing the OH (X) radical yield in the plasma jet, the highest polymer modification efficiency can thus be obtained. [ABSTRACT FROM AUTHOR]

In the past decade, tissue engineering has evolved from a promising technology to an established scientific field. Large attention has focussed on developing scaffolds from both biodegradable and nondegradable polymers to be cultivated with cells, to replace human body defects. The major drawback of most polymers is however their limited cell-interactive properties. An additional complication when developing a surface modification protocol for those materials is the transferability of protocols from 2D substrates to 3D scaffolds. In the present work, we therefore report on possible biological effects originating from the transfer of a double protein coating protocol, involving gelatin type B and fibronectin, from 2D poly-ε-caprolactone (PCL) films to 3D PCL scaffolds produced by rapid prototyping. A variety of techniques including scanning electron microscopy, X-ray photoelectron spectroscopy and confocal fluorescence microscopy confirmed a successful and homogeneous protein-coating on both 2D and 3D substrates. Interestingly, the biological performance of the double protein-coated PCL substrates, reflected by the initial cell adhesion, proliferation, and colonization was superior compared to the other surface modification steps, independent of the material dimension. © 2012 Wiley Periodicals, Inc. J Biomed Mater Res Part A, 2012. [ABSTRACT FROM AUTHOR]

In biomaterial research, great attention has focussed on the immobilization of biomolecules with the aim to increase cell-adhesive properties of materials. Many different strategies can be applied. In previously published work, our group focussed on the treatment of poly-ε-caprolactone (PCL) films by an Ar-plasma, followed by the grafting of 2-aminoethyl methacrylate (AEMA) under UV-irradiation. The functional groups introduced, enabled the subsequent covalent immobilisation of gelatin. The obtained coating was finally applied for the physisorption of fibronectin. The successful PCL surface functionalization was preliminary confirmed using XPS, wettability studies, AFM and SEM. In the present article, we report on an in-depth characterization of the materials developed using ToF-SIMS and XPS analysis. The homogeneous AEMA grafting and the subsequent protein coating steps could be confirmed by both XPS and ToF-SIMS. Using ToF-SIMS, it was possible to demonstrate the presence of polymethacrylates on the surface. From peak deconvoluted XPS results (C- and N-peak), the presence of proteins could be confirmed. Using ToF-SIMS, different positive ions, correlating to specific amino-acids could be identified. Importantly, the gelatin and the fibronectin coatings could be qualitatively distinguished. Interestingly for biomedical applications, ethylene oxide sterilization did not affect the surface chemical composition. This research clearly demonstrates the complementarities of XPS and ToF-SIMS in biomedical surface modification research. [ABSTRACT FROM AUTHOR]

This paper focuses on the modification of cotton fabrics using a low pressure DC glow discharge obtained in air. The influence of different operating parameters such as treatment time, discharge power and operating pressure on the chemical and physical properties of the cotton fabrics is studied in detail. Surface analysis and characterization of the plasma-treated cotton fabrics is performed using vertical wicking experiments, X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and weight loss measurements. The cotton fabrics show a significant increase in wicking behaviour; an effect which increases with increasing treatment time, increasing discharge power and increasing pressure. Results also show that low pressure DC glow treatment leads to surface erosion of the cellulose fibres, accompanied by an incorporation of oxygen-containing groups (C–O, C=O, O–C–O and O–C=O) on the cotton fibres. The DC glow treatment has thus the potential to influence not only the chemical but also the physical properties of cotton fabrics and this without the use of water or chemicals. [ABSTRACT FROM AUTHOR]

• Glucosides of thymol may have different kinetics in the porcine gut than thymol. • Yet, the stability and absorption routes of thymol glucosides remains obscure. • In vitro stability and ex vivo absorption assays were done. • Bacterial hydrolysis was most important source of thymol β-D-glucopyranoside loss. • Thymol α-D-glucopyranoside seemed less prone to degradation or absorption. Thymol α-D-glucopyranoside (TαG) and thymol β-D-glucopyranoside (TβG) are believed to have different kinetic behaviours in the porcine gut than its parent aglycon thymol. However, recently, it was shown that concentrations of both glucosides decreased rapidly in the stomach and proximal small intestine following oral supplementation to piglets as did thymol. Yet, the stability of thymol glucosides in gut contents and their absorption route remains obscure. Therefore, a series of in vitro incubations were performed, simulating the impact of pH, digestive enzymes, bacterial activity and mucosal extracts on stability of these glucosides. Their absorption mechanisms were investigated using the Ussing chamber model in the presence or the absence of inhibitors of sodium-dependent glucose linked transporter 1 and lactase phlorizin hydrolase. Both glucosides remained intact at physiological pH levels in the presence of digestive enzymes. Recoveries from TαG and TβG were below 90% when incubated with small intestinal homogenates from the distal jejunum or from all sampled sites, respectively. However, no aglycon could be detected in these samples. Bacterial inoculum of the small intestine, on the other hand, hydrolysed TβG quickly with up to 44% of free aglycon appearing. TαG proved more resistant to porcine gastro-intestinal bacterial glucosidases with only trace amounts (<1%) of free thymol at the end of the incubations. Electrophysiological measurements in Ussing chambers did not suggest active transport of the glucosides. Mucosal TαG and TβG concentrations were unchanged between start and end of the absorption measurements. Additionally, no TαG and only a very limited amount of TβG were retrieved from the serosal side. Tissue associated concentrations, although marginal (<1% of luminal concentration), were mainly as intact glucoside or as aglycon for TαG and TβG, respectively. Addition of both inhibitors significantly increased the amount of intact glucosides retrieved from the mucosal tissues as compared to controls. In conclusion, bacterial hydrolysis was identified as the most important source of TβG loss, whereas TαG seemed less prone to degradation or absorption in these in vitro and ex vivo models. [ABSTRACT FROM AUTHOR]

The probability of skipping a word is influenced by its processing ease. For instance, a word that is predictable from the preceding context is skipped more often than an unpredictable word. A meta-analysis of studies examining this predictability effect reported effect sizes ranging from 0 to 13%, with an average of 8%. One study does not fit within this picture and reported 23% more skipping of Dutch pronouns in sentences in which the pronoun had no disambiguating value (e.g. 'Mary was envious of Helen because she never looked so good') than in sentences where it did have a disambiguating value (e.g. 'Mary was envious of Albert because she never looked so good'). We re-examined this ambiguity in Dutch using a task that more closely resembles normal reading and observed only a 9% difference in skipping of the pronoun, bringing this linguistic effect in line with the other findings. [ABSTRACT FROM AUTHOR]

Desmet, Brysbaert, and De Baecke (2002a) showed that the production of relative clauses following two potential attachment hosts (e.g., 'Someone shot the servant of the actress who was on the balcony') was influenced by the animacy of the first host. These results were important because they refuted evidence from Dutch against experience-based accounts of syntactic ambiguity resolution, such as the tuning hypothesis. However, Desmet et al. did not provide direct evidence in favour of tuning, because their study focused on production and did not include reading experiments. In the present paper this line of research was extended. A corpus analysis and an eye-tracking experiment revealed that when taking into account lexical properties of the NP host sites (i.e., animacy and concreteness) the frequency pattern and the on-line comprehension of the relative clause attachment ambiguity do correspond. The implications for exposure-based accounts of sentence processing are discussed. [ABSTRACT FROM AUTHOR]

Abstract: An in silico survey of all known 3D-structures of glycoside hydrolases that contain a ligand in the −1 subsite is presented. A recurrent crucial positioning of active site residues indicates a common general strategy for electrostatic stabilisation directed to the carbohydrate’s ring-oxygen at the transition state. This is substantially different depending on whether the enzyme’s proton donor is syn or anti positioned versus the substrate. A comprehensive list of enzymes belonging to 42 different families is given and selected examples are described. An implication for an early evolution scenario of glycoside hydrolases is discussed. [Copyright &y& Elsevier]

An in silico survey of the −1 subsite of all known 3D-structures of O-glycoside hydrolases containing a suitably positioned ligand has led to the recognition – apparently without exceptions – of a transition state stabilising hydrophobic platform which is complementary to a crucial hydrophobic patch of the ligand. This platform is family-specific and highly conserved. A comprehensive list is given with examples of enzymes belonging to 33 different families. Several typical constellations of platform – protein residues are described. [Copyright &y& Elsevier]