Search

Objective: The main aim of the study was to evaluate maternal and newborn urinary iodine concentrations according to the usage of iodine supplementation during pregnancy.Methods: Thirty-seven women with singleton uncomplicated pregnancies and their newborns were included in this study. Maternal urine samples were obtained at the time of delivery and on the third day after delivery. Newborn urine samples were obtained on the third day after delivery. Urinary iodine concentrations were determined by the alkaline ashing of urine specimens followed by the Sandell-Kolthoff reaction using brucine as a colorimetric marker.Result: The overall rate of the usage of iodine supplementation during pregnancy was 54% (20/37). Women who used the iodine supplementation during the pregnancy did not have different urinary iodine concentrations neither at the time of delivery (p = 0.23), nor on the third day after delivery (p = 0.65) in comparison to women without extra iodine supplementation. Newborns from pregnancies with regular iodine supplementation had higher urine iodine concentrations on the third day after delivery (p = 0.02). When women were split into several subgroups based on the daily dosage of iodine supplementation (200, 150, and 50 μg daily and without iodine supplementation), no differences were found in maternal urine iodine concentrations at the time of delivery (p = 0.51) and on the third day after delivery (p = 0.63). Different levels were found in newborn urine iodine concentrations among the subgroups of newborns from pregnancies with different daily doses of iodine supplementation and from pregnancies without iodine supplementation during pregnancy (p = 0.05).Conclusions: Iodine supplementation during pregnancy affects newborn urine concentrations but not maternal urine concentrations. [ABSTRACT FROM AUTHOR]

Background. Linear programming has been used extensively as a tool for nutritional recommendations. Extending the methodology to food formulation presents new challenges, since not all combinations of nutritious ingredients will produce an acceptable food. Furthermore, it would help in implementation and in ensuring the feasibility of the suggested recommendations. Objective. To extend the previously used linear programming methodology from diet optimization to food formulation using consistency constraints. In addition, to exemplify usability using the case of a porridge mix formulation for emergency situations in rural Mozambique. Methods. The linear programming method was extended with a consistency constraint based on previously published empirical studies on swelling of starch in soft porridges. The new method was exemplified using the formulation of a nutritious, minimum-cost porridge mix for children aged 1 to 2 years for use as a complete relief food, based primarily on local ingredients, in rural Mozambique. Results. A nutritious porridge fulfilling the consistency constraints was found; however, the minimum cost was unfeasible with local ingredients only. This illustrates the challenges in formulating nutritious yet economically feasible foods from local ingredients. The high cost was caused by the high cost of mineral-rich foods. A nutritious, low-cost porridge that fulfills the consistency constraints was obtained by including supplements of zinc and calcium salts as ingredients. Conclusions. The optimizations were successful in fulfilling all constraints and provided a feasible porridge, showing that the extended constrained linear programming methodology provides a systematic tool for designing nutritious foods. [ABSTRACT FROM AUTHOR]

Reversible electropermeabilization of plant tissues with heterogeneous structure represents a technological challenge as the response of the different structures within the same specimen to the application of electric field may differ due to different cell sizes, extracellular space configurations, and electrical properties. The influence of five different pulsed electric field protocols with different pulse polarity, number of pulses (25, 50, 75, 100, 250, and 500), and intervals between pulses (no intervals and 1- and 2-ms intervals) on the reversible permeabilization of rucola ( Eruca sativa) leaves was investigated. The electric field intensity was 600 V/cm. Electrical resistance of the bulk tissue was measured before and after electroporation, and propidium iodide was used to analyze the electroporation at the surface of the leaf. Leaf viability was assessed from survival in storage, and cell viability was investigated with fluorescein diacetate. Results indicate that the viability of the leaves could not be predicted by measurements of electrical resistance or permeabilization levels of the leaf surface. Higher survival rate was demonstrated when applying bipolar pulses compared with monopolar pulses, but the latter proved to be more effective than bipolar pulses for permeabilizing the surface of the leaves. Longer intervals between bipolar pulses resulted in increased viability preservation, while the number of electroporated cells on the leaf surface was comparable for all tested protocols. [ABSTRACT FROM AUTHOR]

The exposure of bacterial cells to pulsed electric fields (PEF) leads to the reversible formation of pores in the cell membrane if an applied energy is below the critical level. Therefore, the effect of electric field pulses with amplitudes below 14 kV/cm and the applied energy up to 12.2 J/cm³ on the growth of Lactobacillus plantarum 564 cells was investigated. After PEF treatments, the growth of lactobacilli in De Man-Rogosa-Sharpe broth at 37 °C was monitored by isothermal calorimetry, absorbance and plate counts. All the applied treatments resulted in a higher growth rate of PEF-treated cells during early and mid-log phase, especially bacterial samples treated with lower field intensities (1.3-5.5 J/cm³). The transport of ions and molecules through the cell membrane (which facilitates the growth of electroporated lactobacilli) was particularly evident in the mid-exponential growth phase, where the doubling time was reduced more than 3 times after the exposure to electric pulses of 5.5 J/cm³. The heat production rate during the growth of electroporated cells was also higher, indicating the enhanced metabolic activity of PEF-treated cells. Moreover, the electroporated cells had a better acidification ability than the untreated ones. It can be summarized that the applied PEF treatments with an energy input of below 12 J/cm³ potentially induce reversible electroporation of the cell membrane, which has a positive impact on the growth and metabolic activity of the cells of lactobacilli. [ABSTRACT FROM AUTHOR]

The microstructure and the capillary pressure of the pore space are important variables for better understanding of the complex phenomena occurring during vacuum impregnation (VI) of plant tissues. In this study, we used GASMAS (Gas in Scattering Media Absorption Spectroscopy) of oxygen to, non-destructively, measure the dynamics of the internal pressure in apple pieces after restoration of the atmospheric pressure. Apple pieces were impregnated with isotonic sucrose solution (18% w/v) at different reduced pressures (15, 30, 45 kPa (abs.)). After restoration of the atmospheric pressure, the pressure of the remaining pore space gas could remain as low as 50 kPa (abs) and rise slowly toward ambient over a time scale of hours. Both the residual vacuum and the timescale of pressure equilibration with ambient varied with applied vacuum level and apple variety. It is proposed that at least a part of the pore space of apples may be hydrophobic, giving rise to a negative Laplace pressure, and thus the convective flow of impregnating solution is arrested at a mechanical equilibrium where internal pressure is lower than external pressure. Further pressure equilibration can then only be achieved either by gas diffusion in gas phase, or by gradual wetting of the pores. [ABSTRACT FROM AUTHOR]

Metabolite profiling was used to characterize stress responses of potato tissue subjected to reversible electroporation, providing insights on how potato tissue responds to a physical stimulus such as pulsed electric fields (PEF), which is an artificial stress. Wounded potato tissue was subjected to field strengths ranging from 200 to 400 V/cm, with a single rectangular pulse of 1 ms. Electroporation was demonstrated by propidium iodide staining of the cell nucleae. Metabolic profiling of data obtained through GC/TOF-MS and UPLC/TOF-MS complemented with orthogonal projections to latent structures clustering analysis showed that 24 h after the application of PEF, potato metabolism shows PEF-specific responses characterized by the changes in the hexose pool that may involve starch and ascorbic acid degradation. [ABSTRACT FROM AUTHOR]

Set yoghurts produced with seven different exopolysaccharide-producing starter cultures were subjected to sensory texture profiling including texture evaluation before and after a stirring procedure carried out by trained assessors. The microstructure of four selected yoghurts was investigated by confocal laser scanning microscopy with special focus on the distribution of exopolysaccharides (EPS) in the protein network. Two different types of microstructures were observed, one in which EPS were associated with the protein network and another where EPS appeared to be incompatible with the protein; as a consequence, the EPS were situated in the void spaces in the protein network. The latter yoghurts were less ropy and had higher serum separation than the yoghurts where EPS were associated with the protein, and they exhibited a significant increase in mouth thickness as a result of stirring. Yoghurts in which the EPS were associated with protein had high ropiness, low serum separation and appeared more resistant to stirring. The nature of EPS-protein interactions is extremely important for the textural effects of EPS in fermented milk products, and such interactions depend on the specific starter culture used. [ABSTRACT FROM AUTHOR]

The electrical conductivity of milk at various dilutions was measured at different temperatures from 2 to 70° C. The results showed that dilution has only a small influence on the temperature dependence of conductivity. A simple power-law model predicts that the conductivity is proportional to the milk concentration to the power of 0.84 and a two-term model describes the temperature dependency. The overall model has a standard deviation of 0.0067 mS cm-1, which corresponds approximately to 0.1% milk at 2° C and 0.07% milk at 70° C. It was further shown that for less than about 25% milk in water Kohlrausch's law and the Debye-Hückel-Onsager theory can be used to describe the relationship between the concentration, temperature, and conductivity using a representative limiting molar conductivity of milk ions of 75 mS cm² mol-1. [ABSTRACT FROM AUTHOR]

BSTRACT Texture of potatoes with different shapes (slices and strips) were evaluated after frying and in some cases after baking. Blanched and unblanched potato slices (Bintje variety) were fried at four oil temperatures: 160, 170, 180 and 190C until reaching a moisture content of ∼1.7%. A puncture test with three point support for the slices was applied to measure the texture of potato chips using the following parameters extracted from the force versus distance curves: maximum force of break (MFB) and deformation of break (DB). These two parameters were useful to follow the changes in texture of the fried slices with moisture content at different frying temperatures. Blanched and unblanched potato strips were partially fried at 160C and 190C for 60, 90 and 120 s. The par-fried potatoes were frozen at -20C for one day after which they were baked at 200C for 15 min. The texture of the baked potato strips was evaluated using a bending test with two support points. From the force versus distance curves, two parameters were extracted: maximum force of deformation (MFD) and maximum deformation (MD). Significant higher MFB and lower DB values (P > 0.1) for unblanched fried slices indicate that these are crispier than blanched chips for moisture contents lower than 4% (6.59 N and 0.62 mm vs 5.74 N and vs 0.75 mm for unblanched and blanched chips, respectively, average values for the four frying temperatures employed). There was no effect of the frying temperature and the pretreatment (blanching or unblanching) on the texture of the frozen par-fried potatoes after baking when compared at the same residual moisture content, but blanched potato strips lost moisture more slowly both in frying and in baking. [ABSTRACT FROM AUTHOR]

A simple method is proposed to quantify volume of potato chips by measuring the displaced volume of a finely granular material (rape seeds) by the volume of the chips. Firstly, compaction of the seeds was studied to evaluate the reproducibility and accuracy of the technique. The results obtained indicate an encouraging potential of the technique to estimate the apparent volume of potato chips and give some indications of variation of chip apparent density with some important technological parameters such as chip thickness, frying temperature, and pretreatment of the slices before frying (e.g., blanching). This technique showed that the apparent volume of un-blanched potato slices increased clearly (P = 0.007) with frying temperature (from 120°C to 190°C) until the chips reached final moisture contents <3% (wet basis). For 180 and 190°C, the final apparent volume of these samples indicated that the chips expanded in ∼6% beyond its original volume before frying (14.1 mL). For potato slices blanched in hot water (80°C and 3.5 rain) and fried under the same temperature intervals and conditions, this trend was not statistically significant (P = 0.088), and the average apparent volume of the chips was 10.9 mL which correspond as an average to a shrinkage of ∼23%. [ABSTRACT FROM AUTHOR]