Search

This paper presents the attributional life cycle assessment results of a study of plastic recycling using hydrothermal treatment (HTT), a chemical recycling technology. HTT was investigated due to its potential to address current gaps in the plastic recycling system, largely due to several plastic packaging materials and formats that are currently not processed by traditional mechanical recycling technologies. As society transitions towards a net-zero-based circular economy, assessments should be conducted with a futuristic outlook, preventing costly mistakes by employing the right technologies in the right areas. The results using ReCiPe 2016 impact assessment methodology shows HTT with a GWP of 478 kg CO2 eq. per tonne can generate up to 80% reduction in climate change impacts when compared with comparable end-of-life treatment technologies whilst conserving material with the system. Additionally, the GWP could be reduced by up to 57% by changing how electricity is generated for on-site consumption. This represents a new understanding of the chemical recycling of polymers by establishing a prospective life cycle assessment study that looks to introduce a step-change in the recycling system and highlights the benefits of introducing this technology as opposed to the current model of disposal through incineration or landfill. [ABSTRACT FROM AUTHOR]

The electric vehicle market is an increasingly important aspect of the automotive industry. However, as a relatively new technology, several issues remain present within the industry. An analysis is utilised to examine these issues, along with how they affect the industry and how they can be tackled. Several key issues that affect the electric vehicle market, as well as how efforts to address these issues influence the market, are identified. The analysis also includes the examination of ethical issues, with the issues that arise from the production of raw materials for electric vehicles. The analysis and examination of ethical issues display a wide range of problems in the industry. However, it did highlight the efforts being made to lessen the effect of these problems by various groups, such as regulation by EU and US governing bodies on the materials mined. From this analysis, this paper identifies that many of the other factors examined are directly or indirectly influenced by political and economic factors, also examined in this review. This highlights the impact that governing bodies and businesses have on a vast number of issues that are present within the market and how they can resolve the harmful factors examined. [ABSTRACT FROM AUTHOR]

Chemical precipitation is a consolidated technique applied in wastewater treatment to remove and recover phosphorous and ammonium that remain in the effluent after the anaerobic digestion treatment. The precipitate is magnesium ammonium phosphate hexahydrate (MgNH4PO4·6H2O), also known as struvite, and it is sold as a slow-release fertiliser. However, the value of struvite is quite low and has a limited market. Furthermore, it precipitates with heavy metals and other impurities that need to be removed to make the fertiliser commercially viable. This study looked at the thermal decomposition of struvite to recover added value products and recycle the magnesium for further precipitation. A kinetic study was carried out to understand the mechanism of decomposition and the formation of the different solid phases, which is fundamental for the design and optimisation of the technology. The thermogravimetric study confirmed that thermal decomposition is possible, but ammonia could not be completely released below 250 °C. The thermal analysis also led to the determination of the energy required for the decomposition, found to be 1.87 kJ g−1, which also includes the evaporation of water and ammonia. The kinetic study through the isoconversional method showed the presence of two major reactions, and the model-fitting approach identified the diffusion model as the best fit for the first reaction. The activation energy of the first reaction found with this method was 0.24 kJ g−1, comparable with the data obtained from the isoconversional method. The two-stage decomposition reactions were proposed, and the final calcination product was confirmed as magnesium pyrophosphate, which could be used in agriculture or dissolved in diluted mineral acids solution to separate the phosphate from the magnesium. [ABSTRACT FROM AUTHOR]

Laminates were produced with epoxy resins from waste vegetable oil (WVO) intended for the manufacturing of environmentally-friendly alternatives for the composites industry. Post-use cooking oil appears a promising source of triglycerides for polymer manufacturing. Matrices cured with methylhexahydrophthalic anhydride (MHHPA) were reinforced with glass and flax fibres, creating a library of composites that were compared to analogues from virgin oil and benchmarked against commercial diglycidyl ether of bisphenol A (DGEBA). Glass fibre-reinforced composites presented Young's moduli similar to the benchmark but reduced tensile strength. Chemical pre-treatment of the flax fibre (NaOH and stearic acid) countered the limited tensile performance observed for materials with untreated flax; improvements were evidenced by DMA and SEM. Moreover, WVO-based resins greatly improved impact properties and reduced density with no effect on thermal stability. Therefore, WVO-based composites appear as more sustainable alternatives in applications demanding toughness, stiffness and lightweight over strength. [ABSTRACT FROM AUTHOR]

The assessment of the implementation of green chemistry principles in the syntheses of nanomaterials is a complex decision-making problem that necessitates the integration of several evaluation criteria. Multiple Criteria Decision Aiding (MCDA) provides support for such a challenge. One of its methods – Dominance-based Rough Set Approach (DRSA) – was used in this research to develop a model for the green chemistry-based classification of silver nanoparticle synthesis protocols into preference-ordered performance classes. DRSA allowed integration of knowledge from both peer-reviewed literature and experts (decision makers, DMs) in the field, resulting in a model composed of decision rules that are logical statements in the form: “if conditions, then decision”. The approach provides the basis for the design of rules for the greener synthesis of silver nanoparticles. Decision rules are supported by synthesis protocols that enforce the principles of green chemistry to various extents, resulting in robust recommendations for the development and assessment of silver nanoparticle synthesis that perform at one of five pre-determined levels. The DRSA-based approach is transparent and structured and can be easily updated. New perspectives and criteria could be added into the model if relevant data were available and domain-specific experts could collaborate through the MCDA procedure. [ABSTRACT FROM AUTHOR]

To meet sustainability objectives in the transport sector, natural fiber (NF) and recycled carbon fiber (RCF) have been developed, although they have been typically limited to low to medium performance components. This work has considered the effect of interlayer hybridization of woven NF and non-woven RCF with woven virgin carbon fibers (VCF) on the mechanical and damping performance of hybrid laminates, produced using double bag vacuum infusion (DBVI). The mean damping ratio of the pure laminates showed a trend of NF>RCF>VCF, which was inversely proportional to their modulus. The tensile, flexural and damping properties of hybrid laminates were dominated by the outermost ply. The VCF-RCF and VCF-NF hybrid laminates showed a comparatively greater mean damping ratio. The results of this work demonstrate a method for the uptake of alternative materials with a minimal impact on the mechanical properties and improved damping performance. [ABSTRACT FROM AUTHOR]