Search

Plywood is a structural composite mainly applied in construction. For this purpose, some sort of preservative treatment is recommended to increase its durability. One option of the available treatments is heat treatment, which promotes the modification of the wood properties. This treatment is carried out on the final product (plywood), because it can reduce strength if applied to the veneers. However, no study has proven such a reduction. Therefore, the aim of this work was to evaluate three different temperatures (160 °C, 180 °C and 200 °C) of the heat treatment on the veneer surface and on the physical properties (specific gravity, moisture content and swelling in thickness) and mechanical properties (MOE and MOR in static bending) of Pinus taeda plywood. A reduction was observed in the roughness of the veneer's surfaces and the total extractives content changed, with a minimum value reached in the 160 °C treatment. The plywood specific gravity initially increased with the heat treatment and did not change at higher temperatures, moisture content reduced, and thickness swelling was not affected. There was no change in the mechanical properties of the plywood, evidencing that the veneer heat treatment does not prejudice mechanically the final product. [ABSTRACT FROM AUTHOR]

Preservative treatments increase the durability of wood, and one of the alternative treatments involves the use of chromated copper arsenate (CCA). Due to the toxicity of CCA, the disposal of CCA-treated wood residues is problematic, and burning is considered to provide a solution. The ecotoxicological potential of ash can be high when these components are toxic and mutagenic. The aim of this study was to evaluate the toxicity and genotoxicity of bottom ash leachates originating from CCA-treated wood burning. Physical-chemical analysis of the leachates revealed that in treated wood ashes leachate (CCA-TWBAL), the contents of arsenic and chromium were 59.45 mg.L−1 and 54.28 mg.L−1, respectively. In untreated wood ashes leachate (UWBAL), these contents were 0.70 mg.L−1 and 0.30 mg.L−1, respectively. CCA-TWBAL caused significant toxicity in Lactuca sativa, Allium cepa, and microcrustacean Artemia spp. (LC50 = 12.12 mg.mL−1). Comet assay analyses using NIH3T3 cells revealed that concentrations ranging from 1.0 and 2.5 mg.mL−1 increase the damage frequency (DF) and damage index (DI). According to MTT assay results, CCA-TWBAL at concentrations as low as 1 mg.mL−1 caused a significant decrease in cellular viability. Hemolysis assay analyses suggest that the arsenic and chromium leachate contents are important for the ecotoxic, cytotoxic, and genotoxic effects of CCA-TWBAL. [ABSTRACT FROM AUTHOR]

The remediation of wood preservative–contaminated sites is an important issue due to the carcinogenic nature of some contaminants derived from wood preservatives (e.g., Cr+6, arsenate, and pentachlorophenol). This study evaluated the effects of fertilizer application on remediation potential of co-plantings of Salix interior Rowlee. (Salix) and Festuca arundinacea Schreb. (Festuca) in a wood preservative–spiked technosol while considering the potential contaminant and nutrient leaching. Two levels of nitrogen (N) and phosphorus (P) fertilizers, NaNO3 and NaH2PO4 (25 and 75 mg L−1), were applied to achieve three N:P ratios, i.e., 3:1 (75:25), 1:3 (25:75), and 1:1 (25:25), that were compared with a control treatment (0:0 N:P) in a mesocosm experiment. Roots of the plant supplied with 1:1 and 1:3 N:P had more than double arsenic (As) and copper (Cu) amounts (i.e., biomass × concentration) compared to the control ones. Highest As and Cu amounts in shoots were found for Salix stems and Festuca leaves in the 1:3 and 1:1 N:P treatments, respectively. Arsenic and P leaching was high in mesocosms supplied with 1:3 N:P. Contamination and nutrient leaching in the 1:1 N:P treatment did not differ from the control, except for Cu. In conclusion, 1:1 N:P treatment yielded the best results in terms of metal(loid) uptake and contaminant and nutrient leaching. In 1:1 N:P treatment, the maximum values of percent As, Cr, and Cu in Salix and Festuca aboveground were 0.18%, 0.024%, and 1.20% and 0.89%, 0.08%, and 1.78%, respectively. [ABSTRACT FROM AUTHOR]

Technosols are a major component of urban areas with little to no value, but many benefits can be gained by the use of native plants for their ecological reclamation. The aim of this study is to examine the capacity of North American native woody species to establish in and remediate a wood preservative‐contaminated technosol. Nine species are planted in mesocosms containing highly contaminated or non‐contaminated synthetic technosols. Remediation potential and plant physiology parameters (survival, photosynthesis and root growth) are monitored during one growing season. Results show an inverse relation between species performance ranking in the non‐contaminated technosol compared to ranking in contaminated soil. Overall, Salix bebbiana and Sambucus canadensis show good potential for phytomanagement of heterogenous contaminated technosols, offering the best compromise between performance in non‐contaminated and contaminated soils. Most species are able to phytoextract copper (Cu), with Rhus typhina, Alnus crispa, and S. bebbiana showing the highest Cu concentrations in stems. The use of multiple native species for technosol reclamation can be beneficial due to the heterogeneous nature of soil contaminants. [ABSTRACT FROM AUTHOR]

Fast-growing species are gradually being used more in the Brazilian timber market. Such species are more susceptible to deterioration and require conservative treatment to prolong their service life. This work analyzed the influence of the chromated copper arsenate oxide (CCA-A) treatment on the physical-mechanical properties of the tropical woods Simarouba amara (C20), Cedrelinga catenaeformis (C30), and Erisma uncinatum (C40), which were chosen to cover the three lower strength classes, as prescribed by Brazilian Standard Norm. The CCA-A was applied to the wood with the vacuum-pressure process, which could increase the amount of surface defects and weaken the wood properties. To investigate the influence of this process, complete characterization of the species with and without CCA-A was performed, and a Tukey's multiple comparisons test (5% significance level) was applied. Also, scanning electron microscopy (SEM) images and energy dispersive spectra (EDS) were obtained to investigate the behavior of the preservative at the cellular level. Through the obtained results, it was concluded that the CCA did not affect the physical-mechanical properties of the studied species. [ABSTRACT FROM AUTHOR]

This manuscript provides a brief review about chemical and biological agents used to bioremediate treated wood waste. Wood preservatives have been used to increase wood's useful life, because any species is subject to decay. Studies indicate that the disposal of treated wood after its service has drawn concern and scrutiny. Practices have included disposal in landfills or construction sites as well as destruction by burning, so it is apparent that more environmentally friendly options are needed. To mitigate these problems, acidic agents, fungi, and bacteria can be used as alternatives to remove heavy metals. At optimum temperature and concentration, acids play a major role in the removal process. The process is enhanced when a bioremediation technique is used after chemical extraction. In fact, bioremediation has been shown to be a remarkable technique for recovering copper, arsenic, creosote, and other compounds. The major drawback is the extensive duration of fungal activity for release of heavy metals. [ABSTRACT FROM AUTHOR]

The genera Eucalyptus and Corymbia are widely used in Brazil. Although they present remarkable applicability, they manifest substantial endsplitting and surface checks, which allows wood decay organisms to penetrate the wood. Thereby, the resistance of Eucalyptus grandis x Eucalyptus urophylla (EU) and Corymbia citriodora (CT) treated with chromated copper arsenate type-C (CCA-C) against fungi decay was evaluated. Seventy-two fence posts were assessed; for each species, there were 18 posts treated with CCA-C and 18 non-treated posts. The posts were 2.20 m long and classified into three classes of diameter. The 2% active ingredient was used with a vacuum-pressure cycle. On each fence, disks measuring 2.0 cm thick were cut at the outcrop zone. Two sets of depths were analyzed: the edge at 0 cm to 1.5 cm as well as the inner part at 1.5 cm to 3.0 cm. The samples were subjected to Postia placenta, Gloeophyllum trabeum, and Trametes versicolor attack. The treatment was effective against all fungi, but for CT, the diameter range of 8 cm to 12 cm was optimal. The treated wood from EU samples reached the lowest weight loss for all fungi. Heartwood-sapwood ratio played a major role. By comparing the non-treated woods, EU yielded the highest mass loss. [ABSTRACT FROM AUTHOR]

Chromated copper arsenate (CCA) is used as a wood preservative worldwide. Exposure to it may adversely affect human health. Some events have increased human exposure to CCA, including the Great East Japan Earthquake, which generated a large amount of lumber debris from CCA-treated woods. We elucidated the toxicity due to daily exposure to CCA over a 4-week period at doses of 0,8,40, and 80 mg/kg/day in Wistar Hannover rats. Chromium (Cr) and arsenic (As), but not copper, were detected in the plasma samples of rats treated with various doses of CCA. Males and females showed sedation, and males had poor body weight gain. The clinical pathologies observed in both sexes included hypochromic and microcytic anemia, hepatic and renal dysfunction, and changes in lipid and glucose levels. Histopathologically, males and females showed forestomach hyperkeratosis, mucosal epithelial hyperplasia in the small intestine, rectal goblet cell hypertrophy, and lipofuscin deposition in the proximal renal tubule. Females showed diffuse hepatocellular hypertrophy with increased 8-hydroxydeoxyguanosine levels. These results indicated that oral administration of CCA mainly affected hematopoietic, gastrointestinal, hepatic, and renal systems owing to the toxic effects of As and/or Cr. Major toxic effects were observed in both sexes receiving 40 and 80 mg/kg/day. [ABSTRACT FROM AUTHOR]

Purpose: The present study investigates the possible use and effectiveness of starch-stabilized Fe/Cu nanoparticles for in situ immobilization of arsenic in contaminated soils.Materials and methods: For this purpose, 0.04 wt.% starch-stabilized Fe/Cu nanoparticles were synthesized and tested through batch and column tests for the immobilization of arsenic in a loamy soil contaminated by chromated copper arsenate (CCA).Results and discussion: When the CCA-contaminated loamy soil was treated with 0.4 g/L of starch-stabilized Fe/Cu nanoparticles (0.04 wt.%) at a soil-to-liquid ratio of 0.1, water-leachable arsenic was reduced by 92% and the toxicity characteristic leaching procedure (TCLP) leachability was reduced by 98%. Column elution experiments showed that through application of starch-stabilized Fe/Cu nanoparticles to CCA-contaminated soil, nearly all water-soluble arsenic was transferred to the nanoparticle phase. The TCLP leachability of arsenic remaining in the soil column was reduced by 70% due to the immobilization of arsenic by nanoparticles.Conclusions: In addition to an extremely high arsenic sorption capacity, starch-stabilized Fe/Cu nanoparticles exhibited excellent mobility in the soil environment. Both the high sorption capacity and the excellent mobility in the soil environment suggest potential for application of these nanoparticles to the contaminated soil for potential in situ arsenic immobilization. [ABSTRACT FROM AUTHOR]

Plywood can be used in the furniture industry and in civil construction due to its structural strength. However, for long useful life in construction, especially in tropical countries, it needs to undergo treatments against xylophagous organisms. The most common preservative treatment is the chemical chromated copper arsenate (CCA); there are alternatives, such as heat treatment, that do not use chemicals. The objective of this work was to evaluate the mechanical resistance of CCA and heat-treated plywood prepared at three different temperatures (160 °C, 180 °C, and 200 °C). Pinus taeda plywood with seven veneers and phenol-formaldehyde adhesive was produced and subjected to the preservative treatments. The results showed that the CCA treatment reduced the mechanical strength of the panels, while the heat treatment did not. Heat treatment also decreased panel hygroscopicity, indicating a better dimensional stability. [ABSTRACT FROM AUTHOR]

The importance of a circular economy is today widely accepted and advocated, but among the challenges in achieving this, we find difficulties in the implementation of legislation and policies designed to control various waste streams from society. The example used in this article is wood that has been treated with chromated copper arsenate (CCA), which, in Sweden, has been covered by the rules for hazardous waste since 2002. One year later, in 2003, a survey showed that only 42% to 50% of the expected amount of CCA waste could be traced to the public waste management system. An updated material flow analysis for 2010 revealed that the figure had increased to 73%, whereas the fraction of correctly treated CCA wood waste had increased from 11% to 35%. However, almost one third of the expected volume was still not tracable, and half of the amount that was correctly submitted was incinerated together with nontoxic waste fractions. This results in, for example, arsenic contamination of slag and fly ashes that prevents the further use of these residue products. So, despite legislative instruments, there is still an urgent need for an improved collection of hazardous wood waste, as well as better routines for identifying hazardous flows and separating them from nonhazardous ones. For a circular economy to be achievable, a key priority should be to reduce the gap between intended directions and legislation, on one hand, and activities in practice on the other. [ABSTRACT FROM AUTHOR]

Effects of natural weathering were studied relative to the adhesion strength, surface hardness, and color change of coated heat-treated and untreated Turkish fir and Scots pine wood. For this study, water-based coatings (varnish and paint) were applied on heat-treated samples. The coated heat-treated, and untreated samples were naturally weathered for one year. The difference between several properties such as adhesion strength, hardness, and color were measured before and after weathering. The test results showed that varnished heat-treated samples had good performance as compared to those of the untreated samples. [ABSTRACT FROM AUTHOR]

Background: We investigated the particles released due to abrasion of wood surfaces pressure-treated with micronized copper azole (MCA) wood preservative and we gathered preliminary data on its in vitro cytotoxicity for lung cells. The data were compared with particles released after abrasion of untreated, water (0% MCA)-pressure-treated, chromated copper (CC)-pressure-treated wood, and varnished wood. Size, morphology, and composition of the released particles were analyzed. Results: Our results indicate that the abrasion of MCA-pressure-treated wood does not cause an additional release of nanoparticles from the unreacted copper (Cu) carbonate nanoparticles from of the MCA formulation. However, a small amount of released Cu was detected in the nanosized fraction of wood dust, which could penetrate the deep lungs. The acute cytotoxicity studies were performed on a human lung epithelial cell line and human macrophages derived from a monocytic cell line. These cell types are likely to encounter the released wood particles after inhalation. Conclusions: Our findings indicate that under the experimental conditions chosen, MCA does not pose a specific additional nano-risk, i.e. there is no additional release of nanoparticles and no specific nano-toxicity for lung epithelial cells and macrophages. [ABSTRACT FROM AUTHOR]

The aim of this study was to investigate the dimensional stability, mechanical and biological performance and thermal degradation of wood–plastic composites made from high-density polyethylene and recycled wood treated with chromated copper arsenate (CCA), a commonly used wood preservative chemical. Virgin pine wood samples were also prepared with and without a coupling agent and used as the control group. Samples of CCA-treated Scots pine (Pinus sylvestris L.) with varying wood content were produced by adding different ratios of the coupling agent. The recycled CCA-treated wood-filled composites exhibited better flexural and tensile strength properties and dimensional stability than the control group, whilst their impact strength was less. Biological test values showed improved durability against termites and fungus with the recycled CCA-treated wood-filled composites. In addition, the leaching of heavy metals was significantly diminished when the coupling agent was utilized at a level of 5% (w/w), thus presenting a much lower impact on the environment. [ABSTRACT FROM AUTHOR]

The aim of this work was to increase the amount of recycled waste wood in the wood-processing industry. Contaminations such as plastics and wood preservatives therefore have to be identified and removed. A promising technique to detect this foreign matter is near-infrared (NIR) spectroscopy. For several organic and inorganic active compounds for wood preservation, the NIR reflectance spectra acquired with sensors with the capability of on-line measurements were characterized. Some of them were significantly different from those of previously published spectra. Moreover, untreated wood was distinguishable from wood treated with preservatives. Confounding factors, such as the water content, wood species and solvent of the preservative, were examined which had so far massively interfered the NIR detection and classification. Chemometric-based solutions are presented in this work to cope with analytical challenges arisen from the complexity of waste wood samples. This formed the basis for a sorting trial in which treated wood chips were detected in real time with an NIR spectrometer and automatically separated by pneumatic nozzles, showing that the laboratory experiments can be transferred into small industrial scale. Additionally, the experiments showed that wood-plastic composites (WPC) of different plastic types were distinguishable with NIR spectroscopy and can be sorted by ejection based on this information. Unmixed material is a major prerequisite for a high-quality recycling of WPC and has never been demonstrated on a technical scale. Furthermore, three different NIR devices (hyperspectral imaging camera, miniaturized spectrometer and sorting plant) were evaluated regarding their applicability in the waste wood recycling process. [ABSTRACT FROM AUTHOR]

In this study, we investigated the optical properties of CCA films prepared with poly[styrene-co-sodium 1-allyloxy-2-hydroxypropane sulphonate] particles via soap-free emulsion polymerisation. Experiments were performed by adjusting the several reaction factors such as styrene concentration, sodium 1-allyloxy-2-hydroxypropane sulphonate concentration, polymerisation temperature, initiator and divinylbenzene concentration. All latexes showed uniform spherical particles and they showed a size range of 160-550 nm. All CCA films prepared with self-assembled array showed the respective shiny structural colours from their photonic crystals. It is found that the changes in such polymerisation factors greatly affect the number of particles and particle diameter and refractive indices. Refractive indices and the reflectivity increased with sodium 1-allyloxy-2-hydroxypropane sulphonate concentration, on the other hand, and decreased with divinylbenzene concentration. [ABSTRACT FROM AUTHOR]

In this study, As-, Pb-, and Cu-contaminated soil was stabilized using calcined oyster shells (COS) and steel slag (SS). The As-contaminated soil was obtained from a timber mill site where chromate copper arsenate (CCA) was used as a preservative. On the other hand, Pb- and Cu-contaminated soil was obtained from a firing range. These two soils were thoroughly mixed to represent As-, Pb-, and Cu-contaminated soil. Calcined oyster shells were obtained by treating waste oyster shells at a high temperature using the calcination process. The effectiveness of stabilization was evaluated by 1-N HCl extraction for As and 0.1-N HCl extraction for Pb and Cu. The treatment results showed that As, Pb, and Cu leachability were significantly reduced upon the combination treatment of COS and SS. The sole treatment of SS (10 wt%) did not show effective stabilization. However, the combination treatment of COS and SS showed a significant reduction in As, Pb, and Cu leachability. The best stabilization results were obtained from the combination treatment of 15 wt% COS and 10 wt% SS. The SEM-EDX results suggested that the effective stabilization of As was most probably achieved by the formation of Ca-As and Fe-As precipitates. In the case of Pb and Cu, stabilization was most probably associated with the formation of pozzolanic reaction products such as CSHs and CAHs. [ABSTRACT FROM AUTHOR]

Effects of microwave pre-treatment on impregnation properties in fir wood (Abies alba L.) with acid copper chromate (ACC) were studied here. Flat-sawn specimen boards were prepared with moisture content (MC) of 40 ± 5% and were exposed to microwave radiation with 2450 MHz frequency for 10, 12, 14, and 16 minutes at four different radiation treatments. Microwave-treated specimens, along with the control specimens, were conditioned to the final MC of 12% and then impregnated with 5%-ACC solution, using an empty-cell process. The impregnation properties were then measured, including retention, maximum and minimum depths of penetration, impregnated area in the cross-section, and ACC-leaching. Image J software was used to determine depths of penetration. Results showed that microwave pre-treatment significantly improved all the impregnation properties, with the exception of leaching. Clear direct relation was found between the duration of microwave radiation with the properties. It can be concluded that microwave pre-treatment can be used to significantly improve impregnation properties in fir wood. [ABSTRACT FROM AUTHOR]

Copyright of Maderas: Ciencia y Tecnología is the property of Universidad del Bio-Bio and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Chromated copper arsenate (CCA) is a common wood preservative that has been used worldwide. Studies have shown that there are leaching risks of the preservative components arsenic, chromium and copper. These risks include contamination of soil and water, resulting in toxic effects to humans, animals, plants and ecosystems. This study investigates leaching of the preservative components following exposure of the wood waste as mulch to soil and water. Diffusive gradient in thin films (DGTs) were used to quantify leaching of potentially bioavailable/dissolved forms of the elements along the soil profile. Speciation of chromium was also carried out. All elements were found to leach out of the wood. The containers that included CCA-treated wood waste as a mulch leached higher levels of arsenic, chromium and copper than the controls. The distribution was highest in the top 5 cm of the soil profile and decreased with depth. DGTs proved to be a useful, novel technique for measuring in situ leaching and speciation from waste materials into the environment. [ABSTRACT FROM AUTHOR]

Concentrations of Cu, Cr, and As in soils surrounding 26 Douglas Fir Chromated Copper Arsenate (CCA) treated utility poles and in rainwater runoff from a new CCA treated utility pole segment (log) suspended outside in a cylinder were studied. The age of the utility poles, distances from the poles, rainfall amounts, and characteristics of soil samples including cation exchange capacity (CEC), pH, and total organic carbon (TOC) were considered. Heavier rainfall, damp conditions, and more weathered poles contributed to the greatest leaching of Cu, Cr, and As. The maximum measured soil concentrations of Cu, Cr, and As were 37.5, 65.5, and 38.9mmol/kg and maximumCu, Cr, and As concentrations in rainwater run-off were 14, 77.7 and 55.8 μmol/L. Metal concentrations decreased with distance fromthe poles and, except at one utility pole location, Cu was the most leached of the three elements. The As appeared to have greatermobility in the soil than the Cr. Along the transmission line nearest the coast and from which the greatest amount of samples was collected, soil CEC and TOC values were the highest and the CEC and TOC were directly and strongly correlated. [ABSTRACT FROM AUTHOR]

Search for effective, ecosystem-friendly wood preservative-chemicals, as safe-alternatives to the conventional inorganic types (e.g. CCA), has currently been extensive. Bio-potency of inestimable tropical plants has assumed folkloric dimensions. Thus, the influence of cold water-soluble extracts from potrodom ( Erythrophluem suaveolens) bark, moringa ( Moringa oleifera) and milk bush ( Thevetia peruviana) roots on the durability of pressure-treated ceiba ( Ceiba pentandra) stakes (500 × 50 × 10 mm) was examined under graveyard conditions (EN 252). Their field performance was compared with their CCA-impregnated counterparts. Control stakes were untreated. T. peruviana root extract and CCA were retained most (2.08 and 2.06 × 10 g/mm respectively) then E. suaveolens and M. oleifera root extracts (1.84 and 1.74 × 10 g/mm respectively). Thevetia peruviana extract-treated stakes recorded 19.4 % hardness loss, 41.5 % mass loss and visual durability rating of 3. Similarly, E. suaveolens impregnated stakes recorded 34.6, 28.8 % and 2; M. oleifera root extract 41.2, 98.9 % and 4; CCA-treated stakes 12.7, 19.4 % and 1, and the control 100, 100 % and 4 respectively. Biocides from the plant parts (especially E. suaveolens bark) were as effective as CCA. To broaden the preservative-chemical base for the wood treatment industry, chemicals from organic sources including vegetable-based types, which act as a pool for unlimited source of innocuous biocides, need be increasingly discovered and utilized as alternatives to the efficacious but noxious inorganic types, which pose regulatory, health and environmental fretfulness. Synergy of botanic extracts with the synthetic preservative-chemicals could likewise be explored industrially. [ABSTRACT FROM AUTHOR]

Kinetic aspects of metal release were investigated to understand the effects of synthetic chelating agents (EDTA, EDDS and NTA) and low molecular weight (LMW) organic acids (oxalic and citric acids) on the release kinetics of Cr, Cu and As in chromated copper arsenate (CCA)-contaminated soil, as well as their uptake by maize (Zea maysL.). The results showed that the release of metals from soil was better described by parabolic diffusion, power function or simple Elovich model than by the first- and second-order models, indicating a heterogeneous diffusion of metals. Synthetic chelating agents afforded a higher release of Cu than that of LMW organic acids, whereas citric acid was the most effective chelating agent for Cr and As release. The most effective treatments for stimulating metal uptake in plant shoots were EDDS for Cu, EDTA for Cr, and citric acid for As, as indicated by the removal efficiencies of 0.046%, 0.036%, and 0.004%, respectively. However,Zea maysis not an attractive species for chelate-enhanced phytoremediation of CCA-contaminated soils due to its low phytoextraction rate, even in the presence of chelating agents and ligands. [ABSTRACT FROM AUTHOR]

Recovery of metals from chromated copper arsenate (CCA)-treated southern pine wood particles was investigated by extraction in a microwave reactor with binary combinations of acetic acid (AA), oxalic acid (OxA), and phosphoric acid (PhA). Use of OxA was not successful, as insoluble copper oxalate complexes impeded copper removal. The combination of OxA and AA also had adverse effects on copper extraction. In contrast, the combination of AA and PhA enhanced the chromium recovery rate. The highest recovery rate of metals could be achieved with a mixture of 2.75% PhA and 0.5% AA at 130°C for 10 min in the microwave oven. The total recovery rate approached 100% for arsenic, 96.7% for chromium, and 98.6% for copper in a one-step process. [ABSTRACT FROM AUTHOR]

The burning of wood that has been chemically treated with chromated copper arsenate (CCA) produces an ash containing high concentrations of copper, chromium, and arsenic (CCA-metals). The rainwater-leaching of these metals from burn sites can produce increased soil and water contamination. Soil systems have varying natural abilities to retard leaching and they also impact metals speciation and toxicity through sorption, conversion, and sedimentation-related mechanisms. Recent regulations restricting the use of CCA-treatment have resulted in increased quantities of CCA-treated lumber entering the waste stream, making studies of metals leaching from CCA-wood ash and soil/CCA-wood ash systems important areas of investigation. Wood ash composition, soil composition, and CCA-metals speciation are all important factors determining the degree of the metal mobility in a soil system containing metals leached from CCA-wood ash. The CCA-metals composition of CCA-wood ash was determined by analytical methods. Both pH and batch leaching studies were used to postulate mobility mechanisms within the CCA-wood ash/soil system. The contrasting effects of untreated-wood ash and CCA-wood ash on soil components are presented in order to assess the potential for enhancement of immobilization mechanisms that increase the soil system retardance of CCA-metals mobility. Results of this investigation show that the Ultisol test soil retards the mobility of As and Cr compared to CCA-wood ash alone, while Cu mobility is increased in the presence of the Ultisol test soil. Experimental results show that the alkalinity of a CCA-wood ash/Ultisol soil system is lower than that of an untreated-wood ash/Ultisol soil system. This indicates a difference in chemical composition and the potential consumption of hydroxyl ions during treatment by the retardance mechanisms affecting Cr and As mobility. Therefore, the study of these contaminated soil systems and the potential enhancement of immobilization mechanisms are important areas of investigation. [ABSTRACT FROM PUBLISHER]

Microbial activities are responsible for reducing the harmful effects of pollutants in different burial environments. Within wetlands in particular, microorganisms play an important role in the transformation of heavy metals and metalloids via direct or indirect oxidation/reduction. In turn, these microbial transformations can lead to the detoxification of pollutant elements such as copper, chromium and arsenic that comprise CCA-treated wood. CCA was the most commonly used wood preservative in the UK (up until its partial ban in 2004). CCA prolongs the service life of wood by making it resistant to microbiological attack. As such, it has been regularly used in the construction of platforms and boardwalks in wetlands. However, recent concerns over the impact of the chemical constituents of this treatment on both the environment and human health have prompted the introduction of legislation in order to ensure that this type of treated wood is disposed of in accordance with the relevant health and safety guidelines. In light of this information, it is important to assess changes in the physico-chemical and microbial nature of wetlands associated with the leaching of CCA from wooden structures. The results will not only provide a greater scope for understanding the implications associated with the in situ preservation of the archaeological resource contained within these environments, but also highlight the potential ramifications for wetland ecosystem dynamics. [ABSTRACT FROM AUTHOR]

Traditional wood protection methods employ chemicals that are considered toxic and can adversely affect human health and the environment. Fortunately, serious efforts are being made globally to develop alternative protection methods based on natural products with little or no toxicity, but the progress in implementation of the technologies has been slow because of certain limitations, including discrepancies between laboratory and field performance of natural products, variability in their efficacy related to exposure/environmental conditions, and legislation difficulties due to disagreements globally on setting standards defining the quality of their performance and use. The focus of this review is to present information on the natural compounds that have shown promise for wood protection, and the information is presented under defined interactive categories. In closing, some thoughts are presented on potential use of rapidly evolving technologies, such as nano- and gene-technologies that can lead to significant advances, particularly from the consideration of specificity of natural products and their economic value. [ABSTRACT FROM AUTHOR]

A cradle-to-grave life cycle assessment is done to identify the environmental impacts related to chromated copper arsenate (CCA)-treated softwood used for marine piles in order to understand the processes that contribute to the total impacts and to determine how the impacts compare to those of the alternative products: concrete, galvanized steel, and plastic. Harbor and port authorities, as well as the public and regulatory interests, have increasing need to understand the environmental implications of marine piling material selection, in addition to factors such as cost and service performance. This study uses a life cycle inventory (LCI) to catalog the input and output data from marine pile manufacture, service life, and disposition, and a life cycle impact assessment (LCIA) to evaluate environmental impact indicators including: greenhouse gas (GHG) emissions, fossil fuel and water use, and emissions with the potential to cause acidification, smog, ecotoxicity, and eutrophication. Comparisons of pile products are made at a functional unit of one pile per year of service using primary manufacturing data for treated wood piles and representative data for the alternative products. This life cycle assessment (LCA) finds that the manufacture, use, and disposition of CCA-treated wood marine piles offers lower fossil fuel use and lesser LCIA indicators than competing products manufactured of concrete, galvanized steel, and plastic, while water use is lower for two of the three alternative products. Marine ecotoxicity evaluation was beyond the scope of this project and is best investigated using site specific modeling. [ABSTRACT FROM AUTHOR]

Pressure-treated lumber available for residential applications had been changed from chromated copper arsenate (CCA) treatment to Cu-amine formulations (since January 2004). This change created a need to investigate the performance of coatings on these new Cu-based preservatives as compared with CCA. This study evaluated performance of a number of semitransparent deck stains on CCA, alkaline copper quat (ACQ), copper azole (CA), and untreated wood samples during 3 years of natural weathering. Coatings were evaluated for their ability to reduce water uptake, color change, checking of wood, and mildew growth and to improve general appearance of preservative-treated wood samples. Overall, Cu-amine-treated wood had on average 50% higher water uptake than CCA-treated wood samples. Although solvent-based coatings had better water repellency performance on CCA-treated and untreated wood, there was no significant difference in water-repellent effectiveness (WRE) between water-based and solvent-based coatings on ACQ- or CA-treated wood. All preservative-treated woods had less color change and better visual ratings than those of untreated wood samples. Based on image analysis which was used to determine the total area of surface checking on samples after 3 years, preservative treatments had no significant effect on reducing checking of wood while coatings reduced surface checking by 30-40%. [ABSTRACT FROM AUTHOR]

Structures made of chromated copper arsenic (CCA) have been shown to leach arsenic into the surrounding soil. Soil cores were taken adjacent to six CCA decks at 0, 15, 60 and 300 cm from the deck at depths of 0-10, 10-20, and 20-30 cm, and were analyzed for soil arsenic concentrations. Median soil arsenic concentrations ranged from 1.8 μg/g at a depth of 10-20 cm and a distance of 300 cm to 34.5 μg/g at a depth of 0-10 cm and a distance of 30 cm. Soil arsenic concentrations taken at depths of 0-10 and 10-20 cm decreased as distance from the deck increased. Soil arsenic concentrations close to the deck were higher at lower soil depths and at homes with greater deck wipe arsenic concentrations. Age of deck and slope of land had significant effects on the differences in arsenic concentrations between samples taken at different distances when evaluated in models by themselves, but not in models adjusting for deck wipe concentrations. Size of deck and bulk density of soil did not have significant effects on soil arsenic concentrations. [ABSTRACT FROM AUTHOR]

The environmental impact of chromated copper arsenate (CCA)-treated utility poles is linked to the possible soil and groundwater contamination with arsenic. The objective of the present study was to determine the arsenic speciation in soil and groundwater near in-service CCA-treated poles. Arsenite (As[III]) and arsenate (As[V]) concentrations were determined in 29 surface and subsurface soil samples collected near eight CCA-treated wood poles. Temporal variability of total arsenic concentrations and inorganic arsenic speciation was also assessed in groundwater at two sites through four sampling events over a 19-month period. Arsenic speciation was carried out by a solvent extraction method using ammonium pyrrolidine dithiocarbamate-methyl isobutyl ketone, and total arsenic was quantified by inductively coupled plasma/atomic emission spectrometry/hydride generation. Average arsenic concentrations in surface soils immediately adjacent to utility poles ranged from 153 ± 49 to 410 ± 150 mg/kg but approached background levels (below 5 mg/kg) within 0.50 m from the poles. A positive correlation was found between surface soil As concentration and total Fe content. In subsurface samples (0.50 m), arsenic levels were generally high in sandy soils (up to 223 ± 32 mg/kg), moderate in clayey soils (up to 126 ± 26 mg/kg), and relatively lower in organic soils (up to 56 ± 24 mg/kg). Arsenic(V) was the predominant arsenic species in surface (>78%) and subsurface soils (>66%). Total arsenic concentrations in groundwater below the clayey site were high and varied widely over time (79-390 μg/L), with 30 to 68% as As(III). Below the utility pole located on the organic site with a high Fe content, lower total arsenic levels (12-33 μg/L) were found, with As(III) ranging from 0 to 100%. [ABSTRACT FROM AUTHOR]

A field study was conducted to determine the efficiency of Chinese brake fern (Pteris vittata L.), an arsenic hyperaccumulator, on removal of arsenic from soil at an arsenic- contaminated site. Chinese brake ferns were planted on a site previously used to treat wood with chromated copper arsenate (CCA). Arsenic concentrations in surface and profile soil samples were determined for 2000, 2001, and 2002. In both 2001 and 2002, senesced and senescing fronds only, as well as all fronds, were harvested. Frond arsenic concentrations were not significantly different between the three harvests. Compared to senesced fronds, live fronds resulted in the greatest amount of arsenic removal. There were no significant differences in soil arsenic concentrations between 2000, 2001, and 2002, primarily due to the extreme variability in soil arsenic concentrations. However, the mean surface soil arsenic was reduced from 190 to 140 mg kg-1. Approximately 19.3 g of arsenic were removed from the soil by Chinese brake fern. Therefore, this fern is capable of accumulating arsenic from the CCA-contaminated site and may be competitive, in terms of cost, to conventional remediation systems. However, better agronomic practices are needed to enhance plant growth and arsenic uptake to obtain maximum soil arsenic removal and to minimize remediation time. [ABSTRACT FROM AUTHOR]

The toxicity and mobility of chromium in the environment greatly depends upon its speciation. The reduction of hexavalent chromium to trivalent chromium in a soil environment was examined by spiking three soil types (sandy, clayey, and organic soils) with a common wood preservative solution known as chromated copper arsenate (CCA). Chromium in the CCA preservative solution exists in the hexavalent form. The total and hexavalent chromium concentrations (mg/kg) were measured over a period of 11 months. Leachable chromium concentrations (mg/L) were assessed using the synthetic precipitation leaching procedure (SPLP). The degree and rate of hexavalent chromium reduction were similar for the sand and clayey soil, but much greater for the organic soil. Most of the chromium reduction occurred within the first month of the experiment. At the end of the experiment, approximately 50% of the hexavalent chromium was converted to the trivalent form in the sand and clayey soils. Hexavalent chromium concentrations were below detection in the organic soil at the end of the experiment. Nearly all of the chromium observed in the SPLP leachates was in the form of hexavalent chromium. Chromium leaching was thus greatest in the sand and clay soils where the hexavalent chromium persisted. The results indicate that hexavalent chromium in soils can persist for considerable time periods, in particular in soils with low organic matter content. [ABSTRACT FROM AUTHOR]

Children's exposure to arsenic and chromium from playground equipment constructed with chromated copper arsenate (CCA)-treated wood is a potential concern because of children's hand-to-mouth activity. However, there exists no direct measure of Cr levels on the hands of children after playing in such playgrounds. In this study we measured both soluble and total Cr on the hands of 139 children playing in playgrounds, eight of which were constructed with CCA-treated wood and eight of which were not. Children's age and duration of play were recorded. The hands of each child were washed after play with 150 mL deionized water, which was collected in a bag and subsequently underwent analysis of Cr and 20 other elements, using inductively coupled plasma mass spectrometry. Total average Cr on the hands of 63 children who played in CCA playgrounds was 1,112 ± 1,089 ng (median, 688; range 78–5,875). Total average Cr on the hands of 64 children who played in non-CCA playgrounds was 652 ± 586 ng (median, 492; range 61–3,377). The difference between the two groups is statistically significant (p < 0.01). Cr levels were highly correlated to both Cu (r = 0.672) and As (r = 0.736) levels in CCA playgrounds (p ≤ 0.01), but not non-CCA playgrounds (r = 0.252 and 0.486 for Cu and As, respectively). Principal-component analysis indicates that Cr, Cu, and As are more closely grouped together in CCA than in non-CCA playgrounds. These results suggest that the elevated levels of Cr and As on children's hands are due to direct contact with CCA wood. [ABSTRACT FROM AUTHOR]

Increasing concerns over the use of wood treated with chromated copper arsenate (CCA) in playground structures arise from potential exposure to arsenic of children playing in these play- grounds. Limited data from previous studies analyzing arsenic levels in sand samples collected from CCA playgrounds are inconsistent and cannot be directly translated to the amount of children's exposure to arsenic. The objective of this study was to determine the quantitative amounts of arsenic on the hands of children in contact with CCA-treated wood structures or sand in playgrounds. We compared arsenic levels on the hands of 66 children playing in eight CCA playgrounds with levels of arsenic found on the hands of 64 children playing in another eight playgrounds not constructed with CCA-treated wood. The children's age and duration of playtime were recorded at each playground. After play, children's hands were washed in a bag containing 150 mL of deionized water. Arsenic levels in the hand-washing water were quantified by inductively coupled plasma mass spectrometry. Our results show that the ages of the children sampled and the duration of play in the playgrounds were similar between the groups of CCA and non- CCA playgrounds. The mean amount of water-soluble arsenic on children's hands from CCA playgrounds was 0.50 μg (range, 0.0078-3.5 μg). This was significantly higher (p c 0.001) than the mean amount of water-soluble arsenic on children's hands from non-CCA playgrounds, which was 0.095 μg (range, 0.011-0.41 μg). There was no significant difference in the amount of sand on the children's hands and the concentration of arsenic in the sand between the CCA and non- CCA groups. The higher values of arsenic on the hands of children playing in the CCA playgrounds are probably due to direct contact with CCA-treated wood. Washing hands after play would reduce the levels of potential exposure because most of the arsenic on children's hands was washed off with water. The maximum amount of arsenic on children's hands from the entire group of study participants was < 4 μg, which is lower than the average daily intake of arsenic from water and food. [ABSTRACT FROM AUTHOR]

Soils below nine structures (decks and foot bridges) in Florida were examined to evaluate potential impacts from chromated copper arsenate (CCA), a common wood preservative. Eight of the nine structures were confirmed to have been treated with CCA. Soils collected were evaluated for arsenic, chromium, and copper concentrations as well as pH, volatile solids content and particle size distribution. Two types of soil samples were collected: a soil core and surface soil samples (upper 2.5 cm). One soil core was collected from below each deck and one control core was collected from an area removed from one of the structures. Eight or nine surface soil samples were collected in a grid-like fashion from beneath each structure. Equal numbers of surface control samples were collected from areas away from the structures. Metal concentrations were elevated in both the soil cores and surface samples collected from below the CCA-treated structures. Core samples showed elevated concentrations of metals at depths up to 20 cm. The arithmetic mean concentrations of arsenic, chromium, and copper in the 65 surface soil samples collected from below CCA-treated structures were 28.5 mg/kg, 31.1 mg/kg, and 37.2 mg/kg, respectively, whereas the mean concentrations of arsenic, chromium, and copper in the control samples were 1.34 mg/kg, 8.62 mg/kg, and 6.05 mg/kg, respectively. Arsenic concentrations exceeded Florida's risk-based soil cleanup target /eve/ (SCTL) tor residential settings in all 65 surface soil samples. The industrial setting SCTL was exceeded in 62 of the 65 samples. [ABSTRACT FROM AUTHOR]

Based on previous research work, it is expected that dry recuperation of the metals in chromated copper arsenate (CCA)-treated wood waste can be achieved by low-temperature pyrolysis if a combination of pyrolysis temperature and residence time can be found, for which the two requirements: (1) zero-emission of metals, and (2) metal agglomeration are satisfied. To determine the working conditions for zero metal release, pyrolysis experiments with precisely controlled temperature and residence time and accurately known input metal concentrations of the CCA-treated wood samples, were conducted. Temperatures lower than 327°C are considered, since the release of arsenic is thought to be controlled by the reduction reaction of As2O5 to As2O3, which occurs sharply at 327°C. Metal retentions are calculated based on the measured metal concentrations in the pyrolysis residue and in the dried CCA-treated wood. The results suggest that pyrolysis at 300°C for 20 min gives rise to zero release for the three metals (Cr, Cu, and As), while pyrolysis at 320°C leads to nonnegligible metal releases. Thus, the experimental results suggest that the decomposition temperature of As2O5 is lower than 320°C. However, due to the high experimental uncertainty the observations are inconclusive. For future industrial applications, this study already shows that very careful control of process parameters will be required to ensure a zero arsenic emission. Moreover, this study indicates that an arsenic sampling and analysis method has to be developed and validated to be able to measure the arsenic emissions directly with high accuracy, instead of measuring metal retentions in the solid residue. [ABSTRACT FROM AUTHOR]

Pentachlorophenol and chromated copper arsenate (CCA) have been used worldwide as wood preservatives, but these compounds can toxify ecosystems when they leach into the soil and water. This study aimed to evaluate the capacity of four treatment wetland macrophytes, Phalaris arundinacea, Typha angustifolia, and two subspecies of Phragmites australis, to tolerate and treat leachates containing wood preservatives. The experiment was conducted using 96 plant pots in 12 tanks filled with three leachate concentrations compared to uncontaminated water. Biomass production and bioaccumulation were measured after 35 and 70 days of exposure. There were no significant effects of leachate contamination concentration on plant biomass for any species. No contaminants were detected in aboveground parts of the macrophytes, precluding their use for phytoextraction within the tested contamination levels. However, all species accumulated As and chlorinated phenols in belowground parts, and this accumulation was more prevalent under a more concentrated leachate. Up to 0.5 mg pentachlorophenol/kg (from 81 µg/L in the leachate) and 50 mg As/kg (from 330 µg/L in the leachate) were accumulated in the belowground biomass. Given their high productivity and tolerance to the contaminants, the tested macrophytes showed phytostabilization potential and could enhance the degradation of phenols from leachates contaminated with wood preservatives in treatment wetlands. [ABSTRACT FROM AUTHOR]