Search

In this study, we report an industrial‐scale fabrication method of a multifunctional polymer composite as a scaffold material for bone tissue engineering. This study successfully demonstrated the potential of applying industrial polymer processing technologies to produce specially functionalized tissue engineering scaffolds. With the inclusion of a newly synthesized multifunctional additive, silver‐doped‐calcium phosphate (silver‐CaP), the composite material exhibited excellent osteogenic inducibility of human adipose‐derived stem cells (hASC) and satisfactory antibacterial efficacy against Escherichia coli and Staphylococcus aureus. Also, relative to previously reported methods of direct loading silver particles into polymeric materials, our composite exhibited significantly reduced silver associated cytotoxicity. The enhanced biocompatibility could be a significant advantage for materials to be used for regenerative medicine applications where clinical safety is a major consideration. The impact of different silver loading methodologies on hASC' osteogenic differentiation was also studied. Overall, the results of this study indicate a promising alternative approach to produce multifunctional scaffolds at industrial‐scale with higher throughput, lower cost, and enhanced reproducibility. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 107B: 900–910, 2019. [ABSTRACT FROM AUTHOR]

Electrospun scaffolds provide a dense framework of nanofibers with pore sizes and fiber diameters that closely resemble the architecture of native extracellular matrix. However, it generates limited three-dimensional structures of relevant physiological thicknesses. 3D printing allows digitally controlled fabrication of three-dimensional single/multimaterial constructs with precisely ordered fiber and pore architecture in a single build. However, this approach generally lacks the ability to achieve submicron resolution features to mimic native tissue. The goal of this study was to fabricate and evaluate 3D printed, electrospun, and combination of 3D printed/electrospun scaffolds to mimic the native architecture of heterogeneous tissue. We assessed their ability to support viability and proliferation of human adipose derived stem cells (hASC). Cells had increased proliferation and high viability over 21 days on all scaffolds. We further tested implantation of stacked-electrospun scaffold versus combined electrospun/3D scaffold on a cadaveric pig knee model and found that stacked-electrospun scaffold easily delaminated during implantation while the combined scaffold was easier to implant. Our approach combining these two commonly used scaffold fabrication technologies allows for the creation of a scaffold with more close resemblance to heterogeneous tissue architecture, holding great potential for tissue engineering and regenerative medicine applications of osteochondral tissue and other heterogeneous tissues. [ABSTRACT FROM AUTHOR]

In this study, we develop a simple template-free strategy to fabricate uniform porous CuCoO hollow spheres. The shells of the as-synthesized CuCoO hierarchical hollow nanostructures are composed of primary nanoparticle units, leading to a superior specific surface area of 51 m g. When applied in lithium ion batteries, the porous CuCoO hollow spheres show excellent lithium storage performance, which could deliver a high specific capacity of 930 mAh g after 150 cycles for half-cell and 660 mAh g after 50 cycles for full cell. The good electrochemical properties of the as-synthesized porous CuCoO hollow spheres can be attributed to their unique porous structure, which is beneficial for shorting lithium ion-electron transmission path and alleviating the structural strain of volume change. [ABSTRACT FROM AUTHOR]

In this research, ultrafine fibrous scaffolds with deep cell infiltration and sufficient water stability have been developed from gelatin, aiming to mimic the extracellular matrices (ECMs) as three dimensional (3D) stromas for soft tissue repair. The ultrafine fibrous scaffolds produced from the current technologies of electrospinning and phase separation are either lack of 3D oriented fibrous structure or too compact to be penetrated by cells. Whilst electrospun scaffolds are able to emulate two dimensional (2D) ECMs, they cannot mimic the 3D ECM stroma. In this work, ultralow concentration phase separation (ULCPS) has been developed to fabricate gelatin scaffolds with 3D randomly oriented ultrafine fibers and loose structures. Besides, a non-toxic citric acid crosslinking system has been established for the ULCPS method. This system could endow the scaffolds with sufficient water stability, while maintain the fibrous structures of scaffolds. Comparing with electrospun scaffolds, the ULCPS scaffolds showed improved cytocompatibility and more importantly, cell infiltration. This research has proved the possibility of using gelatin ULCPS scaffolds as the substitutes of 3D ECMs. [ABSTRACT FROM AUTHOR]

Non-motile primary cilia are dynamic cellular sensory structures and are expressed in adipose-derived stem cells (ASCs). We have previously shown that primary cilia are involved in chemically-induced osteogenic differentiation of human ASC (hASCs) in vitro. Further, we have reported that 10% cyclic tensile strain (1 Hz, 4 hours/day) enhances hASC osteogenesis. We hypothesize that primary cilia respond to cyclic tensile strain in a lineage dependent manner and that their mechanosensitivity may regulate the dynamics of signaling pathways localized to the cilium. We found that hASC morphology, cilia length and cilia conformation varied in response to culture in complete growth, osteogenic differentiation, or adipogenic differentiation medium, with the longest cilia expressed in adipogenically differentiating cells. Further, we show that cyclic tensile strain both enhances osteogenic differentiation of hASCs while it suppresses adipogenic differentiation as evidenced by upregulation of RUNX2 gene expression and downregulation of PPARG and IGF-1, respectively. This study demonstrates that hASC primary cilia exhibit mechanosensitivity to cyclic tensile strain and lineage-dependent expression, which may in part regulate signaling pathways localized to the primary cilium during the differentiation process. We highlight the importance of the primary cilium structure in mechanosensing and lineage specification and surmise that this structure may be a novel target in manipulating hASC for in tissue engineering applications. [ABSTRACT FROM AUTHOR]