Search

We develop an efficient algorithm to implement the recently introduced binary tree state (BTS) ansatz on a classical computer. BTS allows a simple approximation to permanents arising from the computationally intractable antisymmetric product of interacting geminals and respects size-consistency. We show how to compute BTS overlap and reduced density matrices efficiently. We also explore two routes for developing correlated BTS approaches: Jastrow coupled cluster on BTS and linear combinations of BT states. The resulting methods show great promise in benchmark applications to the reduced Bardeen–Cooper–Schrieffer Hamiltonian and the one-dimensional XXZ Heisenberg Hamiltonian. [ABSTRACT FROM AUTHOR]

Incorporating cavity magnonics has opened up a new avenue in controlling non-reciprocity. This work examines a yttrium iron garnet sphere coupled to a planar microwave cavity at millikelvin temperature. Non-reciprocal device behavior results from the cooperation of coherent and dissipative coupling between the Kittel mode and a microwave cavity mode. The device's bi-directional transmission was measured and compared to the theory derived previously in the room temperature experiment. Investigations are also conducted into key performance metrics such as isolation, bandwidth, and insertion loss. The findings point to the coexistence of coherent and dissipative interactions at cryogenic conditions, and one can leverage their cooperation to achieve directional isolation. This work foreshadows the application of a cavity magnonic isolator for on-chip readout and signal processing in superconducting circuitry. [ABSTRACT FROM AUTHOR]

This investigation aims to identify sources and assess the concentrations, spatial distribution patterns, and ecological and health risks of Zn, Pb, Cu, Ni, Cr, and Cd from road dust (RD) samples collected from Qom, Iran. Samples were collected from the surface of the roads, and were air-dried for 15 days. Debris including hair and leaves were removed from samples by using 1000-μm nylon sieve. One gram of each dried samples were digested according to US environmental protection agency (USEPA) method using HCl, HNO3, and H2O2 for analysis of heavy metals (HMs), and utilising inductively coupled plasma optical emission spectrometry (ICP-OES). The mean concentrations for all HMs have higher values in the warm season with total mean concentrations of Zn = 227.3 > Pb = 130.1 > Ni = 94.2 > Cu = 78.7 > Cr = 39.5 > Cd = 2 mg/kg. Furthermore, correlations between all concentrations have been investigated using Pearson's method after approving normal distribution for all HMs through Kolmogorov-Smirnov (K-S) test. The spatial distribution of Pb, Zn, and Ni show higher concentrations in the periphery of Qom, while Cu, Cr, and Cd are almost the same for the whole city. The geo-accumulation index (Igeo) categorised all HMs as uncontaminated (average Igeo <0) except for Pb and Zn with average Igeo of 1.52 and 1.01, respectively. Ecological risk (Er) analysis confirms lower risk for all HMs (average Er <40). The warm season exhibits a higher potential ecological risk index (average RI = 81.73) for all components compared to the cold season (average RI = 75.85). Hazard index (HI), and carcinogenic risk assessment (CRA) values ranged lower than 1 and 10−6, respectively, and thus, revealed negligible health risks for individuals. Positive matrix factorisation (PMF) points to four factors for HMs dominantly affected by traffic-related and anthropogenic activities (contributing 38.56%), and natural sources (accounting for 32.45%) in the cold and warm seasons, respectively. [ABSTRACT FROM AUTHOR]

Background Surgical mitral valve repair is the gold standard treatment of severe primary mitral regurgitation (MR). In the light of rapidly evolving percutaneous technologies, current surgical outcome data are essential to support heart-team-based decision-making. Methods This retrospective, high-volume, single-center study analyzed in 1779 patients with primary MR early morbidity and mortality, postoperative valve function, and long-term survival after mitral valve (MV) repair. Surgeries were performed between 2009 and 2022. Surgical approaches included full sternotomy (FS) and right-sided minithoracotomy (minimally invasive cardiac [MIC] surgery). Results Of the surgeries (mean age: 59.9 [standard deviation:11.4] years; 71.5% males), 85.6% (n = 1,527) were minithoracotomies. Concomitant procedures were performed in 849 patients (47.7%), including tricuspid valve and/or atrial septal defect repair, cryoablation, and atrial appendage closure. The majority of patients did not need erythrocyte concentrates. Mediastinitis and rethoracotomy for bleeding rates were 0.1 and 4.3%, respectively. Reoperation before discharge for failed repair was necessary in 12 patients (0.7%). Freedom from more than moderate MR was > 99%. Thirty-day mortality was 0.2% and did not differ significantly between groups (p = 0.37). Median follow-up was 48.2 months with a completeness of 95.9%. Long-term survival was similar between groups (p = 0.21). In the FS and MIC groups, 1-, 5-, and 10-year survival rates were 98.8 and 98.8%, 92.9 and 94.4%, and 87.4 and 83.1%, respectively. Conclusion MV surgery, both minimally invasive and via sternotomy, is associated with high repair rates, excellent perioperative outcomes, and long-term survival. Data underscore the effectiveness of surgical repair in managing MR, even in the era of advancing interventional techniques. [ABSTRACT FROM AUTHOR]

The formation of hydrido rhodium(I) complexes of the type [HRh(CO)3L] and [HRh(CO)2L2] from [Rh(acac)(CO)2]/L (L: bulky monophosphite ligand) requires a ligand‐to‐rhodium ratio [L]/[Rh] > 10 to prevent the possible partial generation of [Rh6(CO)16] under typical hydroformylation conditions. Significant fractions of formed [Rh6(CO)16] at lower ratios of [L]/[Rh] can be reactivated towards the hydrido complexes after the addition of the monophosphite ligand in the presence of synthesis gas. It was also found that [Rh6(CO)16] can be transformed by treatment with an excess of monophosphite ligand under inert gas to form a mononuclear complex of the type [L`Rh(CO)L] with an ortho‐metallated ligand. [ABSTRACT FROM AUTHOR]

Objective: To establish an image acquisition and post-processing workflow for the determination of the proton density fat fraction (PDFF) in calf muscle tissue at 7 T. Materials and methods: Echo times (TEs) of the applied vendor-provided multi-echo gradient echo sequence were optimized based on simulations of the effective number of signal averages (NSA*). The resulting parameters were validated by measurements in phantom and in healthy calf muscle tissue (n = 12). Additionally, methods to reduce phase errors arising at 7 T were evaluated. Finally, PDFF values measured at 7 T in calf muscle tissue of healthy subjects (n = 9) and patients with fatty replacement of muscle tissue (n = 3) were compared to 3 T results. Results: Simulations, phantom and in vivo measurements showed the importance of using optimized TEs for the fat–water separation at 7 T. Fat–water swaps could be mitigated using a phase demodulation with an additional B0 map, or by shifting the TEs to longer values. Muscular PDFF values measured at 7 T were comparable to measurements at 3 T in both healthy subjects and patients with increased fatty replacement. Conclusion: PDFF determination in calf muscle tissue is feasible at 7 T using a chemical shift-based approach with optimized acquisition and post-processing parameters. [ABSTRACT FROM AUTHOR]

Purpose: The present study investigated the effects of a 10-week preparatory training period on biomarkers and jumping performance and associations of changes in biomarkers, load, and jumping performance from the beginning (PRE) to the end of the preparatory period (POST) in elite handball players. Methods: Seventeen elite handball players competing in the first Slovenian men's League were recruited. Training, competition and academic loads were reported weekly, while biomarkers and jumping performance were assessed at PRE and POST. Results: At POST, decreased levels of free testosterone (large effect size [ES] = -1.69, p <.001) and free testosterone to cortisol ratio [FTCR] (large ES = −.95, p =.004) were observed; whereas, better performance on the single leg lateral hop test [SLLH] (large ES =.85, p =.007) and single leg triple hop test [SLTH] (large ES = 1.05, p =.002) were observed compared to PRE. Furthermore, changes in FTCR correlated with changes in cortisol (high r = -.751, p =.001), SLLH (moderate r = -.603, p =.022), and SLTH (moderate r = -.643, p =.013), while changes in free testosterone correlated with SLTH (moderate r = -.645, p =.013). Conclusions: High intensity trainings with a saturated competition schedule can result in disturbed anabolic/catabolic hormone ratio observed through FTCR decrease, which could indicate either an optimal state or early exhaustiveness. It seems that SLLH and SLTH are more sensitive to changes in biomarkers than a single leg hop test. Sport professionals may use the results for individualized monitoring of an athlete's health and performance, specifically, as an aid for adjusting training loads accordingly to prevent performance declines and potential injury/illness events. [ABSTRACT FROM AUTHOR]

Background: With the increasing cases of TBI cases in the elderly population taking anticoagulants for comorbidities, there is a need to better understand the safety of new anticoagulants and how to manage anticoagulated TBI patients. Methods: A meta-analysis using a random-effect model was conducted to compare the effect of preinjury use of DOACs and VKAs on the outcomes following TBI. Results: From 1951 studies, 49 studies with a total sample size of 15,180 met our inclusion criteria. Our meta-analysis showed no difference between preinjury use of DOACs or VKAs on ICH progression, in-hospital delayed ICH, delayed ICH at follow-up, and in-hospital mortality, but using DOACs was associated with a lower risk of immediate ICH (OR = 0.58; 95% CI = [0.42; 0.79]; p < 0.01) and neurosurgical interventions (OR = 0.59; 95% CI = [0.42; 0.82]; p < 0.01) compared to VKAs. Moreover, patients on DOACs experienced shorter length of stay in the hospital than those on VKAs (OR = -0.42; 95% CI = [−0.78; −0.07]; p = 0.02). Conclusion: We found a lower risk of immediate ICH and surgical interventions as well as a shorter hospital stay in patients receiving DOACs compared to VKA users before the head injury. [ABSTRACT FROM AUTHOR]

Claims that GPT-4 can outperform more than 90% of human test-takers in the US Uniform Bar Examination have sparked heated debates about the impact of Generative AI (GenAI) on legal education, academic integrity, and the future of legal practice. Yet GenAI's capabilities in broader legal examination contexts – including in jurisdictions outside the US – are unclear. This study addresses this gap by evaluating GenAI's performance against students who took the 'Criminal Law' final exam at an Australian law school in Spring 2023. Various AI models and prompt engineering techniques were used to generate 10 distinct answers to the exam question. Five criminal law tutors, unaware of AI involvement, graded a mix of AI-generated and student responses. Then, the tutors were briefed on the AI-generated papers they marked and engaged in reflective semi-structured interviews. The study found that GenAI performed below the student average in questions that required detailed legal and critical analysis. However, all GenAI papers performed better than students in open-ended questions and essay writing tasks. These results provide a benchmark for the capabilities and limitations of GenAI in higher education and provide insights into the potential implications of its application to legal assessments and education, curriculum development, and the future workforce. [ABSTRACT FROM AUTHOR]

Women with intellectual and developmental disabilities (I/DD) are less likely to receive cervical cancer screening (CCS) relative to women without disabilities. Primary care providers (PCPs) play key roles in recommending CCS. The purpose of this study was to identify factors PCPs consider when recommending and performing CCS for women with I/DD. Using a qualitative approach, in-depth semi-structured interviews (N = 13) were conducted with majority family medicine-trained PCPs. Through inductive data analysis, it was found that most PCPs reported recommending CCS; however, follow-through for performing CCS varied. PCPs attempted to align their CCS recommendations with national guidelines and provided counseling and education to families and patients about CCS while taking an individualized risk–benefit approach. Despite most PCPs reporting a lack of knowledge or training related to providing I/DD-specific care, PCPs attempted to draw upon experiences with similar populations to recommend and perform CCS. There is an opportunity to improve knowledge of PCPs related to performing CCS for women with I/DD. [ABSTRACT FROM AUTHOR]

Background: Mandibular advancement devices (MAD) are a well-established treatment option for obstructive sleep apnea (OSA). MAD are considered preferably for patients with mild to moderate OSA presenting with a elevated night-to-night variability (NNV). This study aimed to determine the treatment effect of MAD on NNV considering different protrusion distances and patient related outcome (PRO). Methods: We conducted a prospective cohort analysis of patients before MAD with 60% and 80% of the maximum protrusion. OSA severity was assessed using a home-sleep test for two consecutive nights. PRO contained the Epworth Sleepiness Scale (ESS) and sleep related quality of life (FOSQ). Results: Twenty patients with a median overweight body-mass-index of 27.1 (interquartile range (IQR) 16.3 kg/m²), with a mainly mild to moderate OSA with an apnea -hypopnea index (AHI) of 18.3 / h (IQR 17.7) and elevated ESS of 12.5 (IQR 8.0) were included. As opposed to 80%, 60% protrusion significantly but not 80% relevantly reduced AHI (60%%: 11.2 (IQR 5.5)/h, p = 0.01; 80%: 12.9 (IQR18,0)/h, p = 0.32) and improved the ESS (60%: 8.0 (IQR 10,0); 80%: 10 (IQR 9.0)), with therapy settings. No correlation could be detected between NNV and ESS, and FOSQ changes. Higher baseline NNV was associated with severe OSA (p = 0.02) but not with gender, overweight, or status post-tonsillectomy. Conclusions: OSA improvement is associated with lower NNV; both OSA and NNV are connected to the degree of protrusion. Therefore, higher NNV does not justify the exclusion of candidates for MAD treatment. PRO changes are not visibly affected by NNV but by general OSA changes. These findings may help to define and optimize future study designs for the primary outcome decision between objective OSA parameters and PRO. [ABSTRACT FROM AUTHOR]

Numerous dynamic mass balances in the literature that describe the adsorption of gases in a column are written in terms of actual or absolute adsorption, while unwittingly and incorrectly utilizing excess adsorption isotherms. Perhaps this is because the actual and absolute adsorption isotherms cannot be experimentally measured nor predicted without making uncertain assumptions. The objective here was to derive unambiguous relationships between actual, absolute, excess, net and column amounts adsorbed that provide a straightforward understanding of the subtle differences between these quantities and that provide a simple means for incorporating them into dynamic mass balances. For this purpose, the actual, absolute, excess, net and column amounts adsorbed (loadings) were clearly defined, along with various volumes, porosities and densities that exist inside and outside an adsorbent contained in a column with a gaseous adsorbate. These adsorption definitions and quantities were used to derive four interconversion relationships for each type of adsorption in terms of the actual loading. The resulting expressions, based on intensive properties, can be used to relate any adsorption definition to any other adsorption definition. These relationships were also used to derive five dynamic mass balances, one for each type of adsorption. The similarities and differences in the terms between each of these five dynamic mass balances were discussed, along with their applicability to real world problems. In some cases at low pressure where the isotherms do not differ appreciably, it may be approximately correct to use excess or net adsorption isotherms in a dynamic mass balance written in terms of actual or absolute adsorption. However, the extent of the incorrectness is unknown due to mass transfer effects. So, it is recommended to use the dynamic mass balance with its specific type of adsorption, most likely excess adsorption. Then, when certain assumptions are made about the adsorbing and non-adsorbing void fractions, these expressions can be readily used in adsorption process simulation. [ABSTRACT FROM AUTHOR]

This paper evaluates the performance of electrostatic-doped silicene nanoribbon field-effect transistors (ED SiNR-FET) and graphene nanoribbon field-effect transistors (ED GNR-FET) through quantum-based electron transport simulations. It assesses the impact of ribbon widths and device geometry, revealing that ED SiNR-FET generally outperforms ED GNR-FET, particularly in terms of resistance to impurities and short-channel effects. The study identifies optimal ribbon widths for superior performance and introduces the extended channel ED (ECED) structure, which significantly enhances the ION/IOFF ratio to 3.8 × 105 in SiNR-FET compared to 3.9 × 103 in GNR-FET for 15 nm devices. Additionally, analyses of ECED SiNR-FETs and ECED GNR-FET across various channel and gate lengths suggest that ECED devices are suitable for low-power and high-performance applications, with the ECED SiNR-FET displaying excellent subthreshold swing (SS) of 64 mV/dec and high transconductance (gm) of 63 µS. This research confirms the advanced performance of SiNR-FETs over GNR-FETs and the potential of ECED SiNR-FETs in diverse applications. [ABSTRACT FROM AUTHOR]

Sodium cobaltite (NaxCoO2) is one of the most renowned and thermoelectrically promising p‐type cobalt oxide materials, showing exceptional performance in this domain. Nonetheless, its thermal instability in air renders it unsuitable for high‐temperature applications such as energy harvesting from industrial waste heat. To utilize the beneficial properties of NaxCoO2, microscale NaxCoO2 template particles of significantly larger size were effectively embedded within a thermally stable Ca3Co4−yO9+δ–NaxCoO2–Bi2Ca2Co2O9 triple‐phase matrix. This approach additionally aimed to enhance the texture and boost the thermoelectric performance of the ceramic composite. Highly textured p‐type ceramic composites were fabricated via uniaxial cold‐pressing and pressureless sintering in air. The unique hexagonal NaxCoO2 template particles, produced through molten‐flux synthesis, allowed precise control over their shape and dimensions, while the matrix was synthesized via a sol–gel synthesis. The integrated NaxCoO2 particles of the textured composite exhibited increased thermal stability, showing no sign of decomposition at 1173 K in air, whereas the sole template particles decomposed at 1073 K during sintering. A 20 wt% template particle content in the textured composites resulted in a remarkably high and nearly temperature‐independent power factor of 8.8 µW cm−1 K2, corresponding to an improvement of 13% compared to that of the pure matrix material. [ABSTRACT FROM AUTHOR]

In this study, the annual, seasonal and monthly trends of total cloud cover (TCC) and associated climatic variables are investigated for a period of 63 (1959–2022) years in Iran based on ERA5 reanalysis data extracted from ECMWF. To analyze temporal trends, the Mann–Kendall test is used. The geographical location within Iran, especially distance from moisture sources and different atmospheric systems, influences cloudiness such that TCC decreases from north to south and from west to east. With respect to seasons, the highest and lowest average TCC is observed in winter and summer, respectively. The annual trend analysis reveals a decreasing trend in TCC (i.e., Mann–Kendall's tau is negative: −0.40 per decade). On the monthly scale, a statistically significant decrease in TCC occurs during January, February, March, June, August, November, and December. There is a significant decreasing trend in all seasons, among which the maximum decreasing trend is observed in the summer season with a value of −0.31 per decade. Examining the trends of climatic variables shows that on all three temporal scales (annual, seasonal, and monthly) the number of rainy days (NRD) decreases and temperature (T) increases. Spatial analysis of trends (seasonal, annual) suggests the highest decrease in TCC in the west, northwest, east, and southeast, whereas the lowest decrease is in the center of Iran. Spatially, the T trend (annually and spring, summer, and winter seasons) indicates a consistent increase in temperature in the central and eastern parts of Iran. The spatial trend (annual and seasonal) of NRD in the limited parts of northwestern Iran exhibits the highest increasing trend. The results of investigating the anomalies in TCC relative to the long-term average amount of cloud cover on annual and seasonal scales show zero anomalies in most of the years (67% on an annual scale and 73% in summer and 71% in winter). [ABSTRACT FROM AUTHOR]

In this article, two accurate nonlinear methods are proposed to calculate non-symmetrical locking ranges of the Injected Cross-Coupled Oscillator (ICCO) with the parallel RLC tank and series RL with a parallel C tank for both weak and strong injection levels. By writing governing differential equations of circuit elements of the ICCO, graphical presenting of current vectors, and using the averaging method for solving nonlinear equations, equations of the ICCO are simplified. Then, exact non-symmetrical locking ranges are calculated using the iterative method. Moreover, the describing function of the oscillator's nonlinear part, an inverse tangent function, is applied to the model. The inverse tangent function generates complicated governing differential equations of circuit elements that are accurate. Then, it is solved to ICCO for the first time and has novel results for calculating non-symmetrical locking ranges. There is a good agreement between theoretical and simulation results. The proposed non-symmetrical locking ranges are accurate in both weak and strong injections. The absolute percent of errors for various levels of the injection signal is less than 20%. In the bargain, proposed locking ranges are the most accurate compared to previously published results. [ABSTRACT FROM AUTHOR]

This paper evaluates the stress changes and settlements following dissipation of local, 3D excess pore pressure fields induced by controlled blasting. Field data gathered during a blasting experiment in medium dense sand deposits at the Port of Portland, Oregon, were used to validate the numerical simulations. The field measurements included cone penetration tests, excess pore pressure (ue), dissipation, and ground surface and subsurface settlements. The proposed numerical framework consisted of a 2D finite-element approach using a critical state–based hypoplasticity constitutive soil model capable of reproducing changes in void ratio, thus capturing soil densification to study soil arching mechanisms as a result of the dissipation of the local ue field. The soil parameters were calibrated to match laboratory test results performed on reconstituted specimens of medium dense sand and intact specimens of medium stiff silt obtained at the project site. The methodology was validated using the field measurements in terms of changes in tip resistance, shear wave velocities, and distribution of ground surface and subsurface volumetric strains and displacements. The field measurements and numerical results were used to draw conclusions regarding the variability of the postdissipation stress field within the blasted area due to soil arching. The main variables contributing to the development of liquefaction-induced soil arching as a result of controlled blasting were analyzed in a parametric study. The effects of the extent of the blasting zone as a function of the width-to-height ratio (W/H) and blasting intensity quantified with the excess pore pressure ratio (ru) were investigated. Results of the parametric study include the identification of significant reductions in mean effective stresses occurring within the blasting zone for small W/H ratios regardless of the input ru. A discussion regarding blast-induced cone tip resistance (qt) changes with time to explain qt reductions through the lens of case histories and implications for soil arching concludes this study. [ABSTRACT FROM AUTHOR]

Purpose: To describe policy and system-level interventions with potential to improve cancer care at six sites. Methods: In 2016, six institutions received foundation support to develop unique multi-component interventions aimed at improving cancer care for underserved populations. These organizations, located across the United States, participated in a cross-site evaluation to assess the overall initiative impact and to identify potentially promising policy and system-level solutions for dissemination and broader implementation. A health system and policy tracking tool was developed to collect data from each site and included a description of their efforts, strategies employed, and changes achieved (e.g., new policies, clinical protocols). Tracking tool data were analyzed using rapid qualitative analyses and a matrix approach. Semi-structured interviews were conducted with site leaders (N = 65) and were analyzed by thematic analysis. Results: Sites reported 20 system and policy efforts, which resulted in improvements to electronic health records and telehealth strategies, changes to hospital/health system policies, and standardized clinical protocols/guidelines, among others. Efforts were aimed at: (1) coordinating care across multiple providers, supported by patient navigators; (2) expanding psychosocial and supportive care; (3) improving patient-provider communication; and (4) addressing barriers to accessing care. Interview analyses provided insights into successful strategies, challenges, and implications of the COVID-19 pandemic on cancer care. Conclusions and implications for cancer survivors: Despite advances in diagnosis and treatment, cancer care remains inequitable. System-level improvements aimed at eliminating common barriers faced by underserved populations offer opportunities to improve the delivery of equitable, effective, and efficient care. [ABSTRACT FROM AUTHOR]

This paper aims to produce flat, foldable primary member geometries to cover temporary structures in response to the growing population and the need to reduce greenhouse gas production. It presents deployable bending-active grid shell domes as a solution consisting of elastic elements and scissorlike members used as secondary members. The form-finding process is controlled with cable shrinkage to achieve the desired height, and the study has been improved through structural loading tests using finite-element analysis. [ABSTRACT FROM AUTHOR]

This study evaluated the effects of a neuromuscular training (NMT) warm-up program on injury incidence, neuromuscular function, and program adherence, maintenance and acceptance in adolescent basketball players. A total of 275 players from 20 Slovenian teams (15 ± 1.7 years of age), were randomized into an intervention group (IG, n=129) and a control group (CG, n=146). Over three months, the IG incorporated NMT into their warm-ups, while the CG followed their usual practice. Measurements of body anthropometry, muscle contractile properties, and balance were taken before and after the intervention. Also, the injury incidence, training adherence and maintenance were reported. Both groups showed improved balance, with no significant difference between them. However, IG demonstrated reduced delay times in specific muscles, indicating improved neuromuscular function. Injury prevalence proportion (%) during the whole study period was higher in the control group compared to intervention (IG: 10.9% vs. CG: 23.3%), and incidence rate. Moreover, the incidence rate ratio for sustaining an injury was 2.6 on average (ranging from 0.88 to 7.07 for tendon and muscle injuries, respectively), indicating significantly lower injury risk in IG than CG. These findings highlight the effectiveness of NMT warm-ups in reducing injury risk and enhancing neuromuscular function, emphasizing the value of structured injury prevention strategies in youth sports.. [ABSTRACT FROM AUTHOR]

All lineages of SARS-CoV-2, the coronavirus responsible for the COVID-19 pandemic, contain mutations between amino acids 199 and 205 in the nucleocapsid (N) protein that are associated with increased infectivity. The effects of these mutations have been difficult to determine because N protein contributes to both viral replication and viral particle assembly during infection. Here, we used single-cycle infection and virus-like particle assays to show that N protein phosphorylation has opposing effects on viral assembly and genome replication. Ancestral SARS-CoV-2 N protein is densely phosphorylated, leading to higher levels of genome replication but 10-fold lower particle assembly compared to evolved variants with low N protein phosphorylation, such as Delta (N:R203M), Iota (N:S202R), and B.1.2 (N:P199L). A new open reading frame encoding a truncated N protein called N*, which occurs in the B.1.1 lineage and subsequent lineages of the Alpha, Gamma, and Omicron variants, supports high levels of both assembly and replication. Our findings help explain the enhanced fitness of viral variants of concern and a potential avenue for continued viral selection. Author summary: The COVID-19 pandemic was caused by SARS-CoV-2 and is characterized by waves of evolved viral variants with mutations across the viral genome. Nucleocapsid (N) is a viral protein that is critical for viral RNA packaging into particles and for viral replication in cells. Over the pandemic, N has acquired several mutations between amino acids 199 and 205 that are associated with increased infectivity. The mechanism underlying these mutations has been difficult to elucidate given the multiple roles of N protein in the viral lifecycle. Here, we used developed methods to separately determine the effect of mutations on viral particle assembly vs viral RNA replication. We found that the mutations between amino acids 199 and 205 affect N protein phosphorylation and have opposite effects on viral assembly and genome replication. Ancestral SARS-CoV-2 N protein is densely phosphorylated, leading to higher levels of genome replication but 10-fold lower particle assembly compared to evolved variants with low N protein phosphorylation. One of the mutations found in the Alpha, Gamma, and Omicron variants of concern results in expression of a new, truncated N protein called N* that supports high levels of both assembly and replication. Our findings help explain the enhanced fitness of viral variants of concern and a potential avenue for continued viral selection. [ABSTRACT FROM AUTHOR]

Background: Multiple sclerosis (MS) is characterized by inflammation and demyelination in the central nervous system. Recent studies have suggested a potential association between MS and an increased risk of atherosclerosis, a systemic vascular disease involving arterial wall thickening. Understanding this relationship is crucial, given the heightened cardiovascular risk observed in MS patients. Objective: To investigate factors influencing the development of atherosclerosis in patients with multiple sclerosis (pwMS), focusing on carotid intima-media thickness (CIMT) as a marker. Methods: 114 pwMS (82 females and 32 males) and 127 control subjects (57 females and 70 males) were included. The mean CIMT between the two groups was compared. Additionally, the effects of annual relapse rate, EDSS (Expanded Disability Status Scale), MS duration, treatment duration, and type of Disease-modifying treatment (DMT) on CIMT were evaluated. Results: This study included 241 participants with a mean (SD) age of 41.13 years (10.93). CIMT was significantly higher in pwMS compared to controls (p < 0.001). Even after adjusting for age, sex, and BMI (Body Mass Index), CIMT remained significantly higher in the pwMS group (p < 0.001). Spearman's correlation analysis revealed significant associations between CIMT and age, BMI, EDSS score, and disease duration (all p < 0.05). Additionally, the SPMS (Secondary Progressive Multiple Sclerosis) disease course was significantly associated with higher CIMT (p < 0.001). Linear regression analysis identified age as the most significant predictor of increased CIMT in pwMS (p < 0.001), followed by BMI (p = 0.054). Conclusion: This study demonstrates a significant association between MS and increased CIMT. Additionally, age emerged as the most prominent predictor of high CIMT in pwMS, followed by BMI. These findings suggest a potential link between MS and increased cardiovascular risk. Further research is warranted to explore the underlying mechanisms and investigate the long-term cardiovascular outcomes in this population. [ABSTRACT FROM AUTHOR]

Animals can adapt their preferences for different types of reward according to physiological state, such as hunger or thirst. To explain this ability, we employ a simple multi-objective reinforcement learning model that learns multiple values according to different reward dimensions such as food or water. We show that by weighting these learned values according to the current needs, behaviour may be flexibly adapted to present preferences. This model predicts that individual dopamine neurons should encode the errors associated with some reward dimensions more than with others. To provide a preliminary test of this prediction, we reanalysed a small dataset obtained from a single primate in an experiment which to our knowledge is the only published study where the responses of dopamine neurons to stimuli predicting distinct types of rewards were recorded. We observed that in addition to subjective economic value, dopamine neurons encode a gradient of reward dimensions; some neurons respond most to stimuli predicting food rewards while the others respond more to stimuli predicting fluids. We also proposed a possible implementation of the model in the basal ganglia network, and demonstrated how the striatal system can learn values in multiple dimensions, even when dopamine neurons encode mixtures of prediction error from different dimensions. Additionally, the model reproduces the instant generalisation to new physiological states seen in dopamine responses and in behaviour. Our results demonstrate how a simple neural circuit can flexibly guide behaviour according to animals' needs. Author summary: Animals and humans can search for different resources depending on their needs. For example, when you are thirsty at work, you may go to a common room where hopefully coffee or water is available, while if you are hungry, you would rather go to a canteen. Such ability to seek different resources based on a physiological state is so fundamental to survival, that is present also in simple animals. This paper proposes how this ability could arise from a simple neural circuit that can be mapped on evolutionary older parts of the vertebrate brain, called the basal ganglia. The model suggests that this circuit learns the availability of different reward types, and then combines them according to the physiological state to control behaviour. [ABSTRACT FROM AUTHOR]

In situ FTIR spectroscopy was combined with the peak group analysis (PGA) for investigations on the composition of 'unmodified' rhodium carbonyl complexes in the absence of phosphorus ligands at conditions relevant for alkene hydroformylation. As a precursor complex [Rh(acac)(CO)2] was selected since it is commonly used for rhodium catalyzed hydroformylations. At higher pressures of synthesis gas (CO/H2) and elevated temperatures, [Rh(acac)(CO)2] is decomposed to [Rh4(CO)12] and [Rh6(CO)16] as spectroscopically observable components. [Rh4(CO)12] represents an intermediate that readily reacts towards [Rh6(CO)16] at higher temperatures and lower partial pressures of carbon monoxide. The degradation of [Rh(acac)(CO)2] is hampered significantly at higher concentrations of acetylacetone. The involvement of a hydrido species in the reaction sequence from [Rh(acac)(CO)2] to polynuclear rhodium complexes under H2/CO is in aggreement with the detection of the infrared spectrum of [HRh(CO)4] and the considerable decrease of the decomposition rate in the presence of pure CO and D2/CO. With ethene as the alkene substrate, acyl complexes of the type [CH3CH2C(O)Rh(CO)3(π-C2H4)] and [CH3CH2C(O)Rh(CO)4] have been observed, whereas only the tetra carbonyl complex [(CH3)3CCH2CH2C(O)Rh(CO)4] was detected for neohexene. [ABSTRACT FROM AUTHOR]

From the start of life on Earth, several immune defense mechanisms have evolved to guarantee cellular integrity, homeostasis, and host survival. All these sophisticated balances as shaped by and towards the environmental needs have occurred over hundreds of millions of years. Human spaceflight involves various health hazards, such as higher levels of radiation, altered gravity, isolation and confinement, living in tight quarters, and stress associated with being away from home. A growing body of evidence points towards immunological changes in astronauts, including heightened pro-inflammatory responses, reactivation of latent viruses, and cell-mediated alterations, reflecting a dysbalanced state in astronauts. Simultaneously, enhanced pathogenicity, virulence, and drug resistance properties of microorganisms tip the scale out of favor for prolonged stay in space. As we have learned from the past, we see potential for the human immune system, forged and maintained throughout evolutionary history, to adapt to the space exposome. It is unlikely that this will happen in the short time frames set for current space exploration missions. Instead, major risks to astronaut health need to be addressed first, before humans can safely evolve into the space environment. [ABSTRACT FROM AUTHOR]

Triticale is a man-made crop produced by crossing wheat (Triticum aestivum) and rye (Secal cereal) with the aim of increasing the adaptability and potential production of its parental line (wheat) under environmental stresses and harsh conditions. Accordingly, the objectives of this study are as follow, a: compare different stability measurement methods regarding their suitability, b: identify most stable genotypes for cultivar release, and c: provide a freely available package in R programming language (named 'Stbidx') capable of exploiting all stability methods for similar studies. Accordingly, 30 triticale genotypes were evaluated for their stability and adaptability to changing environments during four consecutive years from 2016 to 2020 in different locations in Iran (one year in Zarghan, two years in Ghorveh, one year in Sanandaj) and under two different irrigation regimes (normal irrigation and water deficit stress conditions). All 30 triticale genotypes were cultivated in a randomized complete block design (RCBD) with three replications in each environment (12 environments: 6 trials in 2 conditions). Grain yield of triticale genotypes was measured and it applied to calculate all known stability indices (univariate methods) along with the meta-analysis models were evaluated in this study. Additionally, two novel techniques (Stability ID: SID and AMMI PC Value: APCV) were introduced and successfully tested for screening stable genotypes. These methods were introduced to improve and resolve the limitation of the previous stability methods. Meanwhile, heatmap analysis, as a proper data-mining technique, has been successfully applied for the first time to find stable genotypes in different environments in this study. The results clearly indicated a higher suitability of our introduced methods over previous multi-trials screening methods. Based on our methods and considering all environments, triticale genotypes ELTTCL21 (SID = 8.00; APCV = 28.12), ELTTCL25‌ (SID = 8.14; APCV = 30.02), ELTTCL30 (SID = 8.43; APCV = 17.00), ET-90-8 (SID = 14.00; APCV = 42.05), and Sanabad (SID = 10.57; APCV = 12.44) were among stable genotypes and they can be nominated as new cultivars. Additionally, for stress condition genotypes ELTTCL30 (stress: 380.6 g/m2) and ELTTCL18 (stress: 360.79 g/m2) and for normal condition genotypes ET-90-4 (normal: 849.4 g/m2) and ELTTCL20 (normal:845 g/m2) were respectively the most proper genotypes with the highest production to be considered for each condition separately. [ABSTRACT FROM AUTHOR]

The activation of the Ca2+-channel Orai1 via the physiological activator stromal interaction molecule 1 (STIM1) requires structural rearrangements within the entire channel complex involving a series of gating checkpoints. Focusing on the gating mechanism operating along the peripheral transmembrane domain (TM) 3/TM4-interface, we report here that some charged substitutions close to the center of TM3 or TM4 lead to constitutively active Orai1 variants triggering nuclear factor of activated T-cell (NFAT) translocation into the nucleus. Molecular dynamics simulations unveil that this gain-of-function correlates with enhanced hydration at peripheral TM-interfaces, leading to increased local structural flexibility of the channel periphery and global conformational changes permitting pore opening. Our findings indicate that efficient dehydration of the peripheral TM-interfaces driven by the hydrophobic effect is critical for maintaining the closed state of Orai1. We conclude that a charge close to the center of TM3 or TM4 facilitates concomitant hydration and widening of peripheral TM interfaces to trigger constitutive Orai1 pore opening to a level comparable to or exceeding that of native activated Orai1. The Ca2+ ion channel Orai1 plays an important role in T-cell activation. A charged amino acid side chain close to the center of Orai1-transmembrane domain (TM)3 or -TM4 triggers robust constitutive activity due to enhanced hydration and widening of peripheral TM-interfaces. [ABSTRACT FROM AUTHOR]

Recent findings of NO near Gale Crater on Mars have been explained by two pathways: formation of nitric acid (HNO3) in a warm climate or formation of peroxynitric acid (HO2NO2) in a cool climate. Here, we put forth two hitherto unexplored pathways: (a) deposition of nitric/peroxynitric acid onto ice particles in a cold atmosphere, which settle quickly onto Mars' surface and (b) solar energetic particle‐induced production of nitric/peroxynitric acid. The deposition rates are enhanced and NO production is more efficient under the higher atmospheric pressures typical of Mars' ancient atmosphere. Depending on the unknown rate at which nitric/peroxynitric acid is lost from the surface, the new pathways could result in larger NO‐levels than those detected by the Mars Science Laboratory. We predict a 2:1 ratio of nitrite:nitrate would have deposited in cool surface climates with an icy atmosphere, whereas orders of magnitude more nitrate than nitrite is expected from warm surface climates. Plain Language Summary: The nitrogen oxides discovered in present‐day soil on Mars likely formed in the atmosphere before being deposited on the ground. Two possible mechanisms are deposition of nitric acid (HNO3) when Mars had a warm climate and deposition of peroxynitric acid (HO2NO2) during cold climate. The latter scenario involves processes that have not been considered previously and leads to a much faster deposition rate for nitrogen oxides than was reported in previous studies: solar energetic particles splitting N2 in the middle atmosphere, reactions of nitrogen oxides on the surfaces of ice particles in the atmosphere, and deposition of peroxynitric acid onto the Martian surface when surface pressure was higher. Depending on the unknown rate at which they are lost from the surface due to UV photolysis, the maximum accumulation rate for nitrogen oxides could be much larger than is required to explain the present day measurements. We predict that more nitrite would form than nitrate in a cool climate with an icy atmosphere, whereas in a warm climate much more nitrate than nitrite is expected. So, an investigation of the relative amounts of NO2:NO3 in the soil in the present‐day measurements could reveal the climate state under which the salts formed. Key Points: In a cold climate, heterogeneous reactions with atmospheric ice particles would cause faster deposition of HNOx than dry depositionFormation of HNOx species is faster for earlier Martian climates of larger surface pressureModeled NO accumulates to amounts greater than present‐day measurements, so we propose there may be a loss mechanism that is unidentified [ABSTRACT FROM AUTHOR]

Background: Atrial fibrillation (AF) is a major cause of stroke. An individual risk estimation remains challenging, as AF patients with and without cerebrovascular event (CVE) may differ in yet unknown factors beyond those covered by the CHA2DS2-VASc score. We aimed to identify differences between AF patients with and without CVE with regard to AF characteristics and treatment, vascular risk factors and comorbidities, prognosis and outcome. Methods: We analyzed patients included in the Atrial Fibrillation Rhine-Neckar Region (ARENA) Project, an observational cohort study of patients with AF. Patients were recruited by their general practitioner or during a hospital stay and were divided into two groups for the present analysis: patients with acute CVE at baseline and/or history of CVE versus patients without CVE. Follow-up at 1 year was conducted via phone call. Results: Of 2061 included patients (60.6% male), 292 (14.2%) belonged to the CVE group. Patients in the CVE group were older (mean age 74.6 versus 71.7 years; p < 0.001) and had a higher CHA2DS2-VASc score at baseline (5.3 versus 3.3 points; p < 0.001) based on the preceding CVE. Moreover, patients with either acute or chronic CVE had a larger left atrium (median diameter 47/46 mm versus 44 mm; p = 0.001). Patients with acute CVE had structural heart diseases (p < 0.001) less frequently than patients with previous or without CVE. Mortality at 1 year (HR 1.95; 95%-CI 1.37–2.78) was more frequent in the CVE group (p < 0.001). During 1-year of follow-up, stroke occurred more frequently in survivors with CVE (2.9% versus 0%; p < 0.001). Conclusions: AF patients with CVE have a significantly worse prognosis than AF patients without CVE. Atrial structural remodeling, underlying cardiovascular disease, stroke-induced heart injury and further unidentified factors may account for this finding. Characterization of AF patients including echocardiography to detect atrial structural remodeling may be helpful in risk stratification beyond classical scores. [ABSTRACT FROM AUTHOR]

Objective: This study aimed to examine contemporary results of the frozen elephant trunk (FET) procedure in an all-comers patient cohort. Methods: Between January 2017 and May 2024, a total of 132 consecutive patients with either aortic aneurysm (n = 32), acute aortic dissection (n = 32), or chronic aortic dissection (n = 68) underwent total aortic arch replacement employing the FET technique. In-hospital data were collected prospectively and included preoperative characteristics, intraoperative data, and follow-up results. Results: The median cardiopulmonary bypass time, cardiac ischemia time, and selective antegrade cerebral perfusion time were 180 (161–205), 89 (70–113), and 45 (38–54) min, respectively. Total 30-day mortality rate was 7.6% (n = 10). The rate of major postoperative neurological complications was 6.8% (n = 9) for perioperative stroke and 2.3% (n = 3) for permanent spinal cord injury. Five patients (3.8%) required hemofiltration at the time of discharge due to postoperative kidney injury. Rates of subsequent endovascular and open aortic repair following primary FET were 40.9% (n = 54) and 3.8% (n = 5), respectively. The median time to reintervention was 86 (30–439) days. The median follow-up time was 25 (8–52) months, and overall survival rates at 1, 2, and 3 years were 89%, 89%, and 87%, respectively. Conclusions: Our data are consistent with current reports, indicating that the FET technique is a valuable adjunct in treating extensive aortic arch pathologies. The procedure provides an increasingly safe and effective option for complete aortic arch replacement, even in patients requiring a redo procedure. [ABSTRACT FROM AUTHOR]

This study evaluates the mechanical properties of materials used in the post-endodontic restoration of root-treated teeth and examines their performance under stress to provide insights for material selection in clinical applications. Particular attention is given to zirconium oxide, which demonstrates promising characteristics due to its esthetic color and favorable material properties, positioning it as a potential material for future use in post-endodontic treatments. Three materials—prefabricated quartz fiber-reinforced composite, milled zirconium oxide, and additively manufactured cobalt–chromium—were evaluated using compressive-deflection tests. The specimens were subjected to a 45° compressive load extending 5 mm from a metal core. Their mechanical properties were analyzed using one-way ANOVA and Tukey's post hoc test. Significant differences were observed among the materials. Quartz fiber posts, with the lowest force resistance, buckled at lower loads (143.3 ± 9.9 N), while zirconia posts failed in a brittle manner at higher forces (246.1 ± 97.2 N). Cobalt–chromium posts demonstrated the highest maximal force (323.2 ± 10.5 N, p < 0.001) and, unlike the other materials, bent rather than fractured. The failure patterns of the tested materials underscore the importance of careful material selection when restoring root-treated teeth. Despite displaying distinct fracture characteristics, zirconium oxide, due to its color, rigidity, and hardness, stands out as a promising material for future dental applications. Further research through randomized clinical trials is recommended to refine treatment approaches and optimize clinical outcomes. [ABSTRACT FROM AUTHOR]

Nigeria is witnessing a mass emigration of its active labor force to more advanced economies, just like other developing countries. Approximately half of licensed medical doctors in Nigeria have emigrated, contributing to a widening doctors-to-patients ratio. In response to this concerning trend, in 2023, a legislator introduced a bill to restrain doctors from leaving Nigeria upon completing their studies by withholding their full license for five years. The public, including health professionals, criticized the bill. This study investigates the public discourse on the bill by extracting and analyzing responses published in newspaper articles, blogs, tweets, and LinkedIn posts. The analysis revealed that, while a few politicians supported the bill, the general populace opposed it due to perceived inconsistencies, a lack of focus on the core causes of migration, allegations of political elite's hypocrisy, concerns about human rights violations and unemployment. By conducting this research, this article sheds light on the complexities of public opinion surrounding the proposed legislation, providing valuable insights into the multifaceted challenges associated with addressing the medical brain drain in Nigeria. The article contributes to the ongoing debate on the migratory trends of highly skilled workers from developing countries to advanced economies. [ABSTRACT FROM AUTHOR]

Computerized numerical controls (CNCs) have been invented for the automation of industrial processes. They are used, when the process to be automated is required to be exact and fast with repeatable quality. Originally, the use of CNCs was primarily focused on milling and drilling processes. Today, CNCs are utilized in a wide range of industrial processes due to the growing importance of automation. However, the integration of process information or adaptation to the needs of these processes to achieve advanced manufacturing with CNCs is difficult: Industrial CNCs are rather closed real-time machining systems. Today, process integration is possible, when the interaction between the process and the machine is decoupled in view of the bandwidth of machine dynamics and process dynamics. There are interfaces that allow for process-motivated control loops that are realized on top of the machine control loop (e.g. chatter control). Then, machine-integrated real-time control is not the focus. Besides, it is often possible to change desired values inside the control loop (position, velocity, acceleration) on an axes basis. In this case, adaptation to the process can be realized in each computation cycle. However, process dynamics and machine axes dynamics are generally treated separately. The same holds for extra actuators (e.g., in the spindle) for position control. This paper has two goals. First, it wants to create an understanding for different levels of process-machine coupling. Second, the problem of direct coupling of process dynamics and machine dynamics is focused. Machining systems design propositions as well as some examples for the coupling of process and machine dynamics in the CNC are given. [ABSTRACT FROM AUTHOR]

Background: Clinical data warehouses provide harmonized access to healthcare data for medical researchers. Informatics for Integrating Biology and the Bedside (i2b2) is a well-established open-source solution with the major benefit that data representations can be tailored to support specific use cases. These data representations can be defined and improved via an iterative approach together with domain experts and the medical researchers using the platform. To facilitate these discussions, it is important to understand how users interact with the system. Objective: The objective of this work was to develop metrics for describing user interactions with clinical data warehouses in general and i2b2 in particular. Moreover, we aimed to develop a dashboard featuring interactive visualizations that inform data engineers and data stewards about potential improvements. Methods: We first identified metrics for different data usage dimensions and extracted the relevant metadata about previous user queries from the i2b2 database schema for further analysis. We then implemented associated visualizations in Python and integrated the results into an interactive dashboard using Dash. Results: The identified categories of metrics include frequency of use, session duration, and use of functionality and features. We created a dashboard that extends our local i2b2 data warehouse platform, focusing on the latter category, further broken down into the number of queries, frequently queried concepts, and query complexity. The implementation is available as open-source software. Conclusion: A range of metrics can be derived from metadata logged in the i2b2 database schema to provide data engineers and data stewards with a comprehensive understanding of how users interact with the platform. This can help to identify the strengths and limitations of specific instances of the platform for specific use cases and aid their iterative improvement. [ABSTRACT FROM AUTHOR]

We present an exploration of the effect of electron-phonon coupling and broken inversion symmetry on the electronic and thermal properties of the semimetal LaRhGe3. Our transport measurements reveal evidence for electron-hole compensation at low temperatures, resulting in a large magnetoresistance of 3000% at 1.8 K and 14 T. The carrier concentration is on the order of 1021/cm3 with high carrier mobilities of 2000 cm2/Vs. When coupled to our theoretical demonstration of symmetry-protected almost movable Weyl nodal lines, we conclude that LaRhGe3 supports a Weyl semimetallic state. We discover superconductivity in this compound with a Tc of 0.39(1) K and Bc(0) of 2.2(1) mT, with evidence from specific heat and transverse-field muon spin relaxation. We find an exponential dependence in the normal state electrical resistivity below ~50 K, while Seebeck coefficient and thermal conductivity measurements each reveal a prominent peak at low temperatures, indicative of strong electron-phonon interactions. To this end, we examine the temperature-dependent Raman spectra of LaRhGe3 and find that the lifetime of the lowest energy A1 phonon is dominated by phonon-electron scattering instead of anharmonic decay. We conclude that LaRhGe3 has strong electron-phonon coupling in the normal state, while the superconductivity emerges from weak electron-phonon coupling. These results open up the investigation of electron-phonon interactions in the normal state of superconducting non-centrosymmetric Weyl semimetals. [ABSTRACT FROM AUTHOR]

Background: Normal tissue sparing from radiation damage upon ultra-high dose rate irradiation, known as the FLASH effect with an equivalent tumor response, has been widely reported in murine skin models, and translation of this type of radiotherapy to humans has already begun, with skin sparing being a primary outcome expected. Methods: This study reviews the status of the field, focusing on the proposed mechanisms and skin response assays, outlining what has become known in terms of input parameters that might control the magnitude of the FLASH effect. Results: Murine studies have largely focused on acute damage responses, developing over 3–8 weeks, to single doses of FLASH versus conventional dose rate (CDR), suggesting that at dose rates above tens of Gray per second, with a total dose of more than 20 Gy, the FLASH effect is induced. Fractionated delivery appears to be possible, although fraction sizes >17 Gy appear to be needed for sparing efficacy. The interplay between the dose rate and total dose per fraction remains to be fully elucidated. Oxygen is a modulator of efficacy, with both hypoxia and hyperoxia diminishing the effect of FLASH. Measurement of transient changes in oxygen levels is possible and may be a marker of treatment efficacy. Conclusion: Taken together, murine skin data provide important information for translational studies, despite the associated limitations. Studies of later-term sparing effects, as well as studies on pig skin, are needed to take the next step in assessing translational FLASH efficacy. The control of biological factors, such as tissue oxygenation, may be required to understand and control the response. [ABSTRACT FROM AUTHOR]

Background: Acute ischemic stroke (AIS) imposes a major healthcare burden. It is hypothesized that bacterial infection could influence atherosclerosis and thrombus formation, potentially contributing to AIS. Objectives: We aim to systematically review all studies that have investigated the presence of bacterial signatures within thrombi retrieved following mechanical thrombectomy (MT) procedures in patients with AIS. Design: This systematic review is designed following the Preferred Reporting Items for Systematic Reviews and Meta-Analyses 2020 checklist. Data sources and methods: A comprehensive search was conducted in the Web of Sciences, PubMed, Scopus, and Embase databases to identify relevant studies. Results: The literature search and screening included 11 studies involving 674 patients, with 414 (61.4%) being male and 260 (38.6%) females. Among all the patients, 393 (58.3%) were positive for bacterial presence in their retrieved thrombi. The most utilized technique for bacterial signature detection was bacterial DNA extraction followed by polymerase chain reaction amplification of the 16S rRNA gene sequence. Staphylococcus aureus was the most studied bacteria among the studies analyzed. Conclusion: Bacterial infections and the presence of bacteria within thrombi may significantly contribute to AIS by initiating or exacerbating atherosclerosis or thrombosis. Understanding the mechanisms by which bacteria affect vascular health is crucial for developing effective preventive and therapeutic strategies for stroke patients. [ABSTRACT FROM AUTHOR]

Sediment pollution from potentially hazardous elements (PHE) generated by human activity has grown into a worldwide problem. In this regard, for the first time, surface sediment samples were obtained from six points along the Shahid Rajaee Reservoir for this investigation. Elements concentrations (Cu, Cr, Co, Mn, Fe, Pb, Ni, and Zn) were assessed using ICP-MS. Based on the individual indices (geoaccumulation index, contamination factor), all elements at all sample sites were found to be low in contamination, except Pb and Zn (at sites 1 and 2). The combined effect of PHEs in the sediment samples did not show a considerable concern, according to the synergistic indices. The health risk assessment revealed that recreational receptors were unlikely to face non-carcinogenic or carcinogenic hazards as a consequence of exposure to PHEs in sediments with unintentional ingesting and contact with the skin. The Tessier technique demonstrated that all PHEs were mostly connected with the oxidizable fraction. According to statistical study, while Cu, Co, Cr, Ni, Fe, and Mn were obtained from lithogenic sources, Pb and Zn came from natural as well as human-made sources. [ABSTRACT FROM AUTHOR]

Simple Summary: Milk production and its composition are important for the economy, and they depend on complex biological processes. By finding the key genes and causal mutations linked to milk yield, we can improve breeding strategies for dairy animals. Thanks to advanced bioinformatics tools, it is now easier to find the genetic factors that affect milk traits. In our study, we used these methods to explore the genetics of milk traits in Murciano-Granadina goats. Although we found distinct genes associated with each trait, the regulatory proteins showed shared-yet-dynamic roles in controlling gene activity across different traits. This helped us understand how genes work together in the mammary gland, which affects milk production and udder health. The Murciano-Granadina goat (MUG) is a renowned dairy breed, known for its adaptability and resilience, as well as for its exceptional milk traits characterized by high protein and fat content, along with low somatic cell counts. These traits are governed by complex biological processes, crucial in shaping phenotypic diversity. Thus, it is imperative to explore the factors regulating milk production and lactation for this breed. In this study, we investigated the genetic architecture of seven milk traits in MUGs, employing a two-step computational analysis to examine genotype–phenotype associations. Initially, a random forest algorithm identified the relative importance of each single-nucleotide polymorphism (SNP) in determining the traits of interest. The second step applied an information theory-based approach to exploring the complex genetic architecture of quantitative milk traits, focusing on epistatic interactions that may have been overlooked in the first step. These approaches allowed us to identify an almost distinct set of candidate genes for each trait. In contrast, by analyzing the promoter regions of these genes, we revealed common regulatory networks among the milk traits under study. These findings are crucial for understanding the molecular mechanisms underlying gene regulation, and they highlight the pivotal role of transcription factors (TFs) and their preferential interactions in the development of these traits. Notably, TFs such as DBP, HAND1E47, HOXA4, PPARA, and THAP1 were consistently identified for all traits, highlighting their important roles in immunity within the mammary gland and milk production during lactation. [ABSTRACT FROM AUTHOR]

The synthesis and characterization of ZnO/TiO2, SiO2/TiO2, Al2O3/TiO2, and Al1.9Co0.1O3/TiO2 core/shell nanoparticles (NPs) is reported. The NPs were used for photocatalytic degradation of brilliant blue E-4BA under UV and visible light irradiation, monitored by high-performance liquid chromatography and UV-vis absorption spectroscopy. The size of the NPs ranged from 10 to 30 nm for the core and an additional 3 nm for the TiO2 shell. Al2O3/TiO2 and Al1.9Co0.1O3/TiO2 showed superior degradation under UV and visible light compared to ZnO/TiO2 and SiO2/TiO2 with complete photodecomposition of 20 ppm dye in 20 min using a 10 mg/100 mL photocatalyst. The "Co-doped" Al1.9Co0.1O3/TiO2 NPs show the best performance under visible light irradiation, which is due to increased absorption in the visible range. DFT-calculated band structure calculations confirm the generation of additional electronic levels in the band gap of γ-Al2O3 through Co3+ ions. This indicates that Co-doping enhances the generation of electron–hole pairs after visible light irradiation. [ABSTRACT FROM AUTHOR]

Applying coatings of paraffins and other synthetic waxes is a common approach to impart hydrophobic properties to fibres and thus control their surface characteristics. Replacing these fossil-based products with alternatives derived from renewable resources can contribute to humankind's transition to a sustainable bioeconomy. This study presents the coating of hemp fibres with waxes extracted from pine bark as an exemplar application. Two bio-based emulsifiers were used to prepare wax emulsions suitable for a dry blending process. The coatings on the fibres were characterised, quantified, and visualised using a combination of spectroscopic and microscopic techniques. Confocal fluorescence microscopy was an excellent tool to investigate the spatial distribution of the pine bark waxes on the fibre surfaces. While successful deposition was demonstrated for all tested formulations, coating homogeneity varied for different emulsifiers. Compounding the hemp fibres with a bio-based polyester resulted in the substantial improvement of the mechanical behaviour. However, the presence of a wax coating on the fibres did not lead to a significant change in mechanical properties compared to the controls with uncoated fibres. Optimising the composite chemistry or adjusting the processing conditions might improve the compatibility of the hemp fibres with the matrix material, resulting in enhanced mechanical performance. [ABSTRACT FROM AUTHOR]

Background and Objectives: The primary objective of this study is to assess the effectiveness of 18F-FDG–PET–CT in preoperative staging of cervical cancer, focusing on determining surgical operability and exploring the correlation between its quantitative parameters and clinicopathological characteristics. Materials and Methods: This retrospective study included 62 cervical cancer patients treated at the Department of Gynecology, Clinic for Operative Oncology at the Institute of Oncology Vojvodina between January 2016 and January 2020, where preoperative clinical examinations and 18F-FDG–PET–CT were performed to assess the extent of cancer, followed by intraoperative and pathohistological examinations of surgically removed specimens to provide a comprehensive evaluation. Results: The mean tumor size measured by 18F-FDG–PET–CT was slightly greater than that obtained through clinical examination (26.4 mm vs. 26.0 mm), with a strong linear correlation (r = 0.678, p < 0.001) observed between the two measurement methods. The overall prediction accuracy of 18F-FDG–PET–CT for primary tumors is 88.7% (55/62) [sensitivity 86.8%, specificity 100.0%, PPV 100.0%, NPV 56.2%] and for intraoperative examination is 88.7% (55/62) [sensitivity 98.1%, specificity 33.3%, PPV 89.7%, NPV 75.0%]. The agreement with histopathological examination was good for 18F-FDG–PET–CT and moderate for intraoperative examination for primary tumors. Regarding lymph nodes, the overall prediction accuracy of 18F-FDG–PET–CT is 82.2% (51/62) [sensitivity 53.8%, specificity 89.8%, PPV 58.3%, NPV 88.8%] and for intraoperative examination 66.1% (41/62) [sensitivity 76.9%, specificity 63.3%, PPV 35.7%, NPV 91.2%]. The agreement with histopathological examination was moderate for 18F-FDG–PET–CT and poor for intraoperative examination for lymph node metastasis, highlighting that the overall accuracy of 18F-FDG–PET–CT (82.1%) was significantly higher than that of intraoperative examination (66.1%) (p = 0.002). Conclusions: In conclusion, 18F-FDG–PET–CT provides high accuracy in detecting primary tumors and superior predictive value for lymph node metastases compared to intraoperative examination, highlighting the importance of incorporating this imaging modality into the preoperative evaluation process to enhance diagnostic precision and inform treatment decisions. [ABSTRACT FROM AUTHOR]