Search

One of the leading causes of morbidity and mortality worldwide is coronary artery disease, a condition characterized by the narrowing of the artery due to plaque deposits. The standard of care for treating this disease is the introduction of a stent at the lesion site. This life-saving tubular device ensures vessel support, keeping the blood-flow path open so that the cardiac muscle receives its vital nutrients and oxygen supply. Several generations of stents have been iteratively developed towards improving patient outcomes and diminishing adverse side effects following the implanting procedure. Moving from bare-metal stents to drug-eluting stents, and recently reaching bioresorbable stents, this research field is under continuous development. To keep up with how stent technology has advanced in the past few decades, this paper reviews the evolution of these devices, focusing on how they can be further optimized towards creating an ideal vascular scaffold. [ABSTRACT FROM AUTHOR]

Rigid polyurethane (RPU) foams have been successfully glycolyzed by using diethylene glycol (DEG) and crude glycerol (CG) as transesterification agents. However, DEG did not allow to achieve a split-phase process, obtaining a product with low polyol purity (61.7 wt %). On contrary, CG allowed to achieve a split-phase glycolysis improving the recovered polyol purity (76.5%). This is an important novelty since, up to now, RPUs were glycolyzed in single-phase processes giving products of low polyol concentration, which reduced the further applications. Moreover, the nanosilica used as filler of the glycolyzed foams was recovered completely pure. The recovered polyol successfully replaced up to 60% of the raw polyol in the synthesis of RPU foams and including the recovered nanosilica in the same concentration than in glycolyzed foam. Thus, the feasibility of the chemical recycling of this type of polyurethane composites has been demonstrated. Additionally, PU foams were synthesized employing fresh nanosilica to evaluate whether the recovered nanosilica has any influence on the RPU foam properties. These foams were characterized structurally, mechanically and thermally with the aim of proving that they met the specifications of commercial foams. Finally, the feasibility of recovering the of CG by vacuum distillation has been demonstrated. [ABSTRACT FROM AUTHOR]

Biodegradable polyurethanes (PUs) were produced from castor oil (CO) and poly (3-hydroxybutyrate) diol (PHBD) using hexamethylene diisocyanate as a crosslinking agent. PHBDs of different molecular weights were synthesized through transesterification of bacterial PHB and ethylene glycol by changing the reaction time. The synthesized PHBDs were characterized in terms of Fourier transform infrared and proton nuclear magnetic resonance spectroscopy. A series of PUs at different NCO/OH and CO/PHBD ratios were prepared. The resulting CO/PHBD-based PUs were then characterized in terms of mechanical and thermal properties. Increasing PHBD content significantly increased the tensile strength of CO/PHBD-based PUs by 300% compared to neat CO-based PU. CO/PHBD-based PUs synthetized from short chain PHBD exhibited higher tensile strength compared to those produced from long chain PHBD. As revealed by scanning electron microscopy analysis, such improvement in stiffness of the resulting PUs is due to the good compatibility between CO and PHBD. Increasing PHBD content also increased the crystallinity of the resulting PUs. In addition, higher degradation rates were obtained for CO/PHBD-based PUs synthetized from long chain PHBD compared to neat CO PU and PUs produced from short chain PHBD. [ABSTRACT FROM AUTHOR]