Search

Aligned with the imperatives of national ecological civilization construction, the systematic investigation into the intricate interplay between shifts in land utilization and the assessment of ecosystem services plays a pivotal and indispensable role in advancing ecological civilization. This endeavor holds significant implications. It aids in optimizing the ecological landscape at the regional level and fosters harmonious coexistence between humanity and the natural world. The study utilizes land-use remote sensing interpretation data from three time periods (2000, 2010, and 2020) and employs various methodologies, including equivalent factor coefficient correction, sensitivity analysis, and spatial autocorrelation. The objective is to uncover the spatiotemporal dynamics of land-use changes and Ecosystem Service Value (ESV) in Lanzhou City. Furthermore, geographic detectors are applied to explore the driving factors influencing ESV spatial heterogeneity and their interactions. The research findings indicate the following: (1) From 2000 to 2020, grassland and cropland were the predominant land-use types in Lanzhou City, with cropland and urban land experiencing the most active changes. (2) ESV in Lanzhou City increased from 179.37 billion RMB in 2000 to 193.86 billion RMB in 2020, reflecting an ESV total growth rate of 8.07% and a gradual improvement in the ecological environment. Spatially, ESV exhibits a "west high, east low" distribution pattern, with the center shifting towards the northwest and southeast, gradually reducing spatial imbalance. (3) Analysis of ESV spatial autocorrelation reveals that high-high clusters are predominantly found within the Tulu Gou National Forest Park and the Xinglong Mountain National Natural Reserve, while low-low clusters are primarily concentrated in the central urban area of Lanzhou City. Over the period from 2000 to 2020, the spatial clustering effect of ESV within the study area has progressively intensified. 4)NDVI, precipitation, and GDP emerge as pivotal factors influencing spatial differentiation within Lanzhou City, with natural and societal elements exerting interactive effects on ESV spatial disparities. The research results integrate environmental considerations into the decision-making process, offering valuable insights for formulating targeted ecological protection policies in Lanzhou City. This study embodies concrete measures taken by Lanzhou City in practicing China's concept of "green water and green mountains are golden silver mountains," providing a theoretical basis for the harmonious and sustainable development of the ecological economy. [ABSTRACT FROM AUTHOR]

Conventional sutures used in surgical procedures often lack the capability to effectively monitor physical and chemical activities or the microbial environment of surgical wounds due to their inadequate mechanical properties, insufficient electrical accuracy and unstability. Here, we present a straightforward layer-by-layer coating technique that utilizes 3-glycidoxypropyltrimethoxysilane (CA), graphene oxide (GO), and ascorbic acid (AA) to develop conductive silk-based surgical sutures (CA-rGSFS). The CA-rGSFS feature a continuous reduced graphene oxide (rGO) film on their surface, forming robust hydrogen bonds with silk fibroin. The reduction process of rGO is confirmed through Raman analysis, demonstrating an enhanced D peak to G peak ratio. Notably, the CA-rGSFS exhibit exceptional mechanical properties and efficient electron transmission, with a knot-pull tensile strength of 2089.72 ± 1.20 cN and an electrical conductivity of 130.30 ± 11.34 S/m, respectively, meeting the requirements specified by the United States Pharmacopeia (USP) for 2-0 sutures. These novel CA-rGSFS demonstrate the ability to accurately track resistance changes in various fluid environments with rapid response, including saline, intestinal, and gastric fluids. The suture also retains remarkable stretchablility and stability even after enduring 3000 tensile cycles, highlighting their potential for precise surgical site monitoring during the wound healing process. [ABSTRACT FROM AUTHOR]

To solve the problems of difficult to model parameter selections, useful signal extraction and improper-signal decomposition in nonlinear, non-stationary dam displacement time series prediction methods, we propose a new predictive model for grey wolf optimization and variational mode decomposition and long short-term memory (GVLSTM). Firstly, we used the grey wolf optimization (GWO) algorithm to optimize the parameters of variable mode decomposition (VMD), obtaining the optimal parameter combination. Secondly, we used multiscale permutation entropy (MPE) as a standard to select signal screening, determining and recon-structing the effective modal components. Finally, the long short-term memory neural network (LSTM) was used to learn the dam deformation characteristics. The result shows that the GVLSTM model can effectively reduce the estimation deviation of the prediction model. Compared with VMDGRU and VMDANN, the average RMSE and MAE value of each station is increased by 19.11%~28.58% and 27.66%~29.63%, respectively. We used determination (R2) coefficient to judge the performance of the prediction model, and the value of R2 was 0.95~0.97, indicating that our method has good performance in predicting dam deformation. The proposed method has outstanding advantages of high accuracy, reliability, and stability for dam deformation prediction. [ABSTRACT FROM AUTHOR]

Peripheral nerve blockade (PNB) is a common treatment to relieve postoperative pain. However, local anesthetics alone have a short duration of action and severe side effects during postoperative analgesia. In order to overcome these limitations, the present study reported an injectable hydrogel with a drug slow‐release profile for regional nerve blockade. The injectable hydrogel was prepared by crosslinking with gelatin and NHS‐PEG‐NHS, which was degradable in the physiological environment and displayed sustainable release of anesthetics locally, thus improving the disadvantage of the high toxicity of local anesthetics. In this regard, we conducted a series of in vitro characterizations and proved that the hydrogel has a porous three‐dimensional mesh structure with high drug loading capability, and sustainable drug release profile. And cytotoxicity experiments confirmed the good biocompatibility of the hydrogel. It was shown that using the animal sciatic nerve block model, the analgesic effect was greatly improved in vivo, and there was no obvious evidence of permanent inflammation or nerve damage in the block site's sections. This locally slow‐release platform, combined with local anesthetics, is therefore a promising contender for long‐acting analgesia. [ABSTRACT FROM AUTHOR]

The Yellow River basin is an important ecological security barrier and ecologically vulnerable region in China. Landscape ecological risk assessment and influencing factor analysis based on land-use/land-cover change (LUCC) and boosted regression tree (BRT) models are of great significance to the coordinated and sustainable development of regional ecological environment and social economy. Based on LUCC and driving factor data from 1980 to 2020, the ecological risk index (ERI) model was constructed to evaluate the spatiotemporal evolution characteristics of ecological risk in the past 40 years. Especially, a new method of influencing factor analysis based on the BRT model is proposed. The final index size of the influencing factors was further quantitatively evaluated. The results showed that the spatial distribution pattern of landscape ecological risk in the Yellow River basin was "highest in the north and lowest in the south, highest in the west and lowest in the east." During the periods, the overall ecological risk and high risk increased first and then decreased. Elevation (24.8%) was the most important factor affecting landscape ecological risk, followed by precipitation (17.8%), GDP (15.2%), and temperature (14.6%). It showed that the particularity of the geographical location of the Yellow River basin eventually led to the stronger influence of natural factors on the change in landscape ecological risk under the interference of human activities. This study will provide a new perspective for quantitative assessment of the final contribution rate of landscape ecological risk factors. [ABSTRACT FROM AUTHOR]

The original stress equilibrium state of the soil is destroyed after the excavation of the double-line shield tunnel, resulting in the settlement of the stratum above the tunnel and bringing adverse effects on the surface buildings and subsurface pipelines near the tunnel. The reasonable prediction of subsurface settlement is significant for protecting adjacent underground structures. The wave propagation model is introduced to describe the settlement mechanism of the stratum above the tunnel based on random medium theory, and the subsurface settlement model of single-line tunnel is derived through the Fourier transform. The disturbance influence factor of double-line tunnel is defined, and the corresponding settlement model is established. The three-dimensional subsurface settlement models of single-line and double-line shield tunnels are proposed by introducing the surface displacement release rate of palm surface and maximum slope of surface vertical settlement. The models are verified using monitoring data, and the effects of the parameters on the model are analyzed. [ABSTRACT FROM AUTHOR]

Recent studies suggest the observed seasonal delay of rainfall over the Sahel is mainly driven by anthropogenic aerosol forcing, which features a robust east–west contrasting changes in recent decades, with negative and positive top-of-the-atmosphere shortwave radiative forcing in South and East Asia (SA&EA) and in North America and Europe (NA&EU), respectively. Their individual effects on the Sahel rainfall annual cycle remain unclear. Here, by designing idealized sensitivity experiments based on Community Earth System Model (CESM1.2), we show that both negative radiative forcing over SA&EA and positive radiative forcing over NA&EU contribute to the delayed phase and enhanced amplitude of Sahel rainfall annual cycle. To understand the underlying physical processes, both the convective quasi-equilibrium (CQE) and atmospheric energetic frameworks are utilized. Both frameworks can well explain the seasonal delay in the rainfall annual cycle over the Sahel under the regional radiative forcings, with the CQE framework showing stronger explanatory power. Based on the insights from both frameworks, we conducted a moisture budget analysis and found that the negative radiative forcing over SA&EA causes an anomalous low-level anticyclonic circulation, which transports more moisture to the Sahel. As the anomalous anticyclone is stronger in summer and fall compared to spring, rainfall is delayed in the Sahel. Under the influence of the positive radiative forcing over NA&EU, more warming in the northern hemisphere causes northward transport of moisture to the northern tropics associated with the cross-equatorial transport of energy. The moisture transport increases relative humidity over the Sahel and enhances the effective atmospheric heat capacity that delays the seasonal rainfall. [ABSTRACT FROM AUTHOR]

The one-step direct laser writing process has been an efficient strategy for constructing flexible metal structures. However, the effect of laser wavelength on the structuring process remains unclear, thus restricting the universal manufacturing process development. In this work, the feasibility of one-step writing of flexible Cu structures with different wavelength continuous diode lasers has been verified. Here, photothermal reactions dominate in the decomposition of the reducing agent to form copper structures. Differences in the wavelength primarily affect the photothermal reaction amplitude for structuring, resulting in a variation in the formation of Cu structures. Under our processing conditions, the photothermal reaction induced by 532 nm laser is higher than 808 nm laser, a higher reduced-joining degree of the Cu structure can be achieved by 532 nm laser. This results in a superior conductivity, adhesion, and bendability of Cu structures fabricated by 532 nm laser than that of 808 nm laser. Furthermore, strain sensors that can detect different bending angles and bending frequencies have been fabricated by 532 nm laser-written structures to demonstrate their practical applications. [ABSTRACT FROM AUTHOR]

As one of the pivotal components of computer numerical control (CNC) machine tools, the CNC rotary table plays a crucial role in machining workpieces. The accumulated assembly error not only compromises the machining accuracy of the workpiece but also diminishes the service life of the CNC machine tool due to vibrations arising from assembly clearances. Addressing this issue, the study focuses on the cradle-type double rotary table of a five-axis machining center and investigates the structural composition and assembly relationships of the rotary table. An error transmission model for the cradle-type double rotary table based on the Jacobian-Torsor theory is also constructed. Furthermore, a local parallel dimension chain method is introduced to simplify the error transmission dimension chain of the cradle-type double rotary table, and Monte Carlo simulation is employed to evaluate the cumulative assembly error. Finally, the coaxiality error of the swing axis and the table error of the rotary axis' worktable were respectively calculated, followed by a discussion of the results. This method provides comprehensive guidance for the error assessment and structural optimization of five-axis machining centers. [ABSTRACT FROM AUTHOR]

Perovskite light‐emitting diodes (PeLEDs) that can be air‐processed promises the development of displaying optoelectronic device, while is challenged by technical difficulty on both the active layer and hole transport layer (HTL) caused by the unavoidable humidity interference. Here, we propose and validate that, planting the polymer brush with tailored functional groups in inorganic HTL, provides unique bilateral embedded anchoring that is capable of simultaneously addressing the n phases crystallization rates in the active layer as well as the deteriorated particulate surface defects in HTL. Exemplified by zwitterionic polyethyleneimine‐sulfonate (PEIS) in present study, its implanting in NiOx HTL offers abundant nuclei sites of amino and sulfonate groups that balance the growth rate of different n phases in quasi‐2D perovskite films. Moreover, the PEIS effectively nailed the interfacial contact between perovskite and NiOx, and reduced the particulate surface defects in HTL, leading to the enhanced PLQY and stability of large‐area blue perovskite film in ambient air. By virtue of these merits, present work achieves the first demonstration of the air‐processed blue PeLEDs in large emitting area of 1.0 cm2 with peak external quantum efficiency (EQE) of 2.09 %, which is comparable to the similar pure‐bromide blue PeLEDs fabricated in glovebox. [ABSTRACT FROM AUTHOR]

Perovskite light‐emitting diodes (PeLEDs) that can be air‐processed promises the development of displaying optoelectronic device, while is challenged by technical difficulty on both the active layer and hole transport layer (HTL) caused by the unavoidable humidity interference. Here, we propose and validate that, planting the polymer brush with tailored functional groups in inorganic HTL, provides unique bilateral embedded anchoring that is capable of simultaneously addressing the n phases crystallization rates in the active layer as well as the deteriorated particulate surface defects in HTL. Exemplified by zwitterionic polyethyleneimine‐sulfonate (PEIS) in present study, its implanting in NiOx HTL offers abundant nuclei sites of amino and sulfonate groups that balance the growth rate of different n phases in quasi‐2D perovskite films. Moreover, the PEIS effectively nailed the interfacial contact between perovskite and NiOx, and reduced the particulate surface defects in HTL, leading to the enhanced PLQY and stability of large‐area blue perovskite film in ambient air. By virtue of these merits, present work achieves the first demonstration of the air‐processed blue PeLEDs in large emitting area of 1.0 cm2 with peak external quantum efficiency (EQE) of 2.09 %, which is comparable to the similar pure‐bromide blue PeLEDs fabricated in glovebox. [ABSTRACT FROM AUTHOR]

This study delves into the influence of inherent minerals within coal gangue (CG) on the preparation and performance of coal gangue /polyethylene (CG/PE) composites, focusing on the role of SiO2 in interfacial compatibility. A systematic examination unveils the consequences of varying SiO2 content on physical, mechanical, thermal, and microstructural attributes of the composites. SiO2 incorporation significantly improves physical properties, boosting density and hardness but impacting tensile strength negatively. It enhances bending strength and modulus while diminishing tensile strength. Judicious SiO2 addition enhances thermal stability, but excess SiO2 may compromise thermal decomposition. Microstructural analysis, including SEM and FTIR, elucidates SiO2‐PE interactions, primarily through physical entanglement. SiO2 introduction promotes more ordered PE molecular chain arrangements, elevating composite crystallinity. In summary, this study provides in‐depth insights into SiO2's mechanistic impact on CG/PE composite properties, laying a robust foundation for designing environmentally friendly composites. These findings hold promise for advancing sustainable materials science and engineering. Future research may explore SiO2 optimization for specific applications and synergistic effects with other fillers in composites. Highlights: SiO2 greatly improves the properties of CG/PE composites with detailed exploration.Reveals the specific SiO2‐PE interaction mechanism for a better comprehension.Performs structural analysis via XRD with valuable findings presented.Promotes pioneering advancements in eco‐friendly materials with broad significance. [ABSTRACT FROM AUTHOR]

Weiyang Palace, the royal palace of the Western Han Dynasty, is a part of the Silk Roads: the Routes Network of Chang'an-Tianshan Corridor on the World Heritage list. The south palace wall of Weiyang Palace is a well-preserved earthen heritage site within the palace, but it is undergoing continuous deterioration due to the influence of vegetation and external environmental factors. This study pioneers the integration of high-resolution three-dimensional LiDAR scanning with multi-source data analysis, including unprecedented on-site botanical surveys, to explore the subtle effects of different vegetation types on the structural integrity of the south palace wall. Through contour line analysis and facade grid analysis, we extracted the deterioration locations of typical sections of the earthen heritage sites. And we classified the overlying vegetation types on the wall using an object-oriented classification algorithm. Our findings reveal a complex interaction between vegetation and earthen structures: paper mulberry exhibits protective qualities against erosion, while Ziziphus jujuba significantly exacerbates structural vulnerabilities. The methodologies applied in this study for extracting deterioration at earthen heritage sites and integrating multi-source spatial data can serve as a technical application model for monitoring and analyzing the driving forces of earthen heritage sites along the entire Silk Road network, thereby better guiding the conservation of earthen heritage sites. [ABSTRACT FROM AUTHOR]

Wastewater produced in beryllium mining seriously affects ecological balance and causes great environmental pressure. We designed a novel porous lotus leaf biochar modified with PO43−/NH4+ multifunctional groups (MLLB) and used it for beryllium(Be) removal from beryllium mining wastewater. Kinetic and thermodynamic experiments showed that the adsorption capacity (Qe) of Be with MLLB from the simulated beryllium mining wastewater could reach 40.38 g kg−1 (35 °C, pH = 5.5), and the adsorption process was spontaneous and endothermic. The dispersion coefficient Kd of Be with MLLB was 2.6 × 104 mL g−1, which proved that MLLB had strong selective adsorption capacity for Be. Phosphoric acid, ammonia, and hydroxyl groups on the MLLB surface would complex with Be to form Be(OH)2 and Be(NH4)PO4 complexation products, which implied that surface complexation and precipitation reactions might co-existed in the adsorption process. The above results showed that MLLB could effectively adsorb Be and prevent beryllium exposure in a beryllium mining process. [ABSTRACT FROM AUTHOR]

The Yellow River basin is an important ecological security barrier and ecologically vulnerable region in China. Landscape ecological risk assessment and influencing factor analysis based on land-use/land-cover change (LUCC) and boosted regression tree (BRT) models are of great significance to the coordinated and sustainable development of regional ecological environment and social economy. Based on LUCC and driving factor data from 1980 to 2020, the ecological risk index (ERI) model was constructed to evaluate the spatiotemporal evolution characteristics of ecological risk in the past 40 years. Especially, a new method of influencing factor analysis based on the BRT model is proposed. The final index size of the influencing factors was further quantitatively evaluated. The results showed that the spatial distribution pattern of landscape ecological risk in the Yellow River basin was “highest in the north and lowest in the south, highest in the west and lowest in the east.” During the periods, the overall ecological risk and high risk increased first and then decreased. Elevation (24.8%) was the most important factor affecting landscape ecological risk, followed by precipitation (17.8%), GDP (15.2%), and temperature (14.6%). It showed that the particularity of the geographical location of the Yellow River basin eventually led to the stronger influence of natural factors on the change in landscape ecological risk under the interference of human activities. This study will provide a new perspective for quantitative assessment of the final contribution rate of landscape ecological risk factors. [ABSTRACT FROM AUTHOR]

The deep‐blue perovskite light‐emitting diodes (PeLEDs) are of essential and indispensable for the application in full‐gamut display. However, the deep blue emission required large bandgap in small n phase exhibits high surface activity that gives rise to the difficulty of n phase distribution control spatially and proportionally in quasi‐2D perovskite films. Here, the deep‐blue pure‐bromide perovskite films is present that exhibit spatially vertical n phase distribution, owing to the partially ionized amino acid salt of 3‐Ammonium propionic acid bromide (3CBr) modulated crystallization kinetic of perovskite. The strong interaction of 3CBr and perovskite lattice improves the stability of small n phases, showing tunable photoluminescence (PL) emission and enhanced PL quantum yield (PLQY). The achieved champion deep blue PeLED shows a maximum EQE of 3.64% at electroluminescence (EL) emission wavelength of 466 nm, locating at the top rank of the similar devices. This work provides an effective strategy to fabricating efficient deep‐blue perovskite films and devices, promoting the development of perovskite‐based application in display. [ABSTRACT FROM AUTHOR]

Objective: To evaluate the efficacy and safety of low‑intensity pulsed ultrasound (LIPUS) for the treatment of Peyronie's disease (PD). Methods: To analyze the treatment effect of 106 PD patients, 56 patients treated with LIPUS as therapy group and 50 patients with oral L‐carnitine and vitamin E as control group. 56 patients were treated with LIPUS three times per week for four consecutive weeks (12 times totally). Penile erectile pain, erectile function, the size of penile plaques, and penile curvature were assessed for all of these 106 PD patients before treatment and at 4‐ and 24‐week follow‐ups to evaluate the treatment effect. Erectile pain was assessed by visual analog scale (VAS), while erectile function using the International Index of Erectile Function scale (IIEF‐5), and penile plaque size was measured by ultrasound. After alprostadil was injected into the penile body to induce a full erection, the penis was measured with a protractor at the maximum bending degree. Results: After 4‐weeks follow‐up, the VAS scores of the LIPUS group were significantly lower than the baseline (P < 0.01), while no significant differences were found in the control group (P > 0.05). After 24‐weeks follow‐up, the VAS scores of the control group reduced significantly but also were significantly higher than the LIPUS group (P < 0.01). The IIEF‐5 scores of the LIPUS group were significantly higher than the baseline (P < 0.01). While the IIEF‐5 scores of the control group showed no significant differences both after 4‐ and 24‐weeks follow‐up (P > 0.05). The penile plaque size showed no significant differences after 4‐ and 24‐weeks follow‐up both in the LIPUS group and the control group (P > 0.05). The penile curvature degrees showed a significant reduction after 4‐weeks follow‐up in LIPUS group (P < 0.01). While the penile curvature degrees of the control group showed no significant differences both after 4‐ and 24‐weeks follow‐up (P > 0.05). No complications, such as penile pain, hematoma, or skin ecchymosis, were observed during the entire process of LIPUS treatment, nor did they appear during follow‐up. Conclusions: In patients with acute PD, LIPUS could relieve erectile pain and improve erectile dysfunction. Moreover, it appears not to reduce plaque size and not to have a clinically significant effect on penile curvature. Furthermore, LIPUS also shows a good safety profile during the management of PD and should be recommended for the clinical management of PD. [ABSTRACT FROM AUTHOR]

The Yellow River basin is an important ecological security barrier and ecologically vulnerable region in China. Landscape ecological risk assessment and influencing factor analysis based on land-use/land-cover change (LUCC) and boosted regression tree (BRT) models are of great significance to the coordinated and sustainable development of regional ecological environment and social economy. Based on LUCC and driving factor data from 1980 to 2020, the ecological risk index (ERI) model was constructed to evaluate the spatiotemporal evolution characteristics of ecological risk in the past 40 years. Especially, a new method of influencing factor analysis based on the BRT model is proposed. The final index size of the influencing factors was further quantitatively evaluated. The results showed that the spatial distribution pattern of landscape ecological risk in the Yellow River basin was "highest in the north and lowest in the south, highest in the west and lowest in the east." During the periods, the overall ecological risk and high risk increased first and then decreased. Elevation (24.8%) was the most important factor affecting landscape ecological risk, followed by precipitation (17.8%), GDP (15.2%), and temperature (14.6%). It showed that the particularity of the geographical location of the Yellow River basin eventually led to the stronger influence of natural factors on the change in landscape ecological risk under the interference of human activities. This study will provide a new perspective for quantitative assessment of the final contribution rate of landscape ecological risk factors. [ABSTRACT FROM AUTHOR]

A stable self-assembled 2-hydroxyphosphonoacetic acid (HPAA) layer was constructed on the Zn surface via chelation. This HPAA protective layer significantly inhibits the water-related side reactions and suppresses Zn dendrite growth. Consequently, the Zn-HPAA-1h anode shows a long cycling lifetime of 650 h in a symmetric cell at 30.0 mA cm−2. Also, the Zn-HPAA-1h//V2O5 full cell demonstrates a high capacity of 154.1 mA h g−1 after 1000 cycles at 2 A g−1. This study provides a new strategy for developing dendrite-free Zn anodes. [ABSTRACT FROM AUTHOR]

The exploitation and utilization of iron ore is the basis of the development of iron and steel industry. The process mineralogy of a middle and low grade magneitte ore in Liberia, West Africa was studied by X-ray fluorescence spectroscopy, X-ray diffraction analysis and Held emission scanning electron microscopy. The results showed that the TFe grade of the raw ore was 42.25%. The iron mainly existed in the form magnetite and pyrite. In add-on the distribution ratio of magnetite and pyrite in the iron ore was 52.92% and 4.66% respectively. Gangue minerals were mainly diopside, biotite, anorthite and so on. Magnetite existed mainly in granular, polygonal, irregular, flaky, and grid shapes. Part of magnetite grains were internally wrapped with amorphous diopside, the other part of magnetite grains were interconnected with calcium feldspar. Magnetite was distributed in the form of medium to tine particles, with particle sizes mainly distributed between 12 to 20 µm interval. Therefore, a process consisting of two stages of grinding, one stage of roughing and two stages of cleaning was adopted. An iron concentrate with TFe grade of 68.43%, TFe recovery of 91.14%, and mFe grade of 67.31% was obtained, which provides a theoretical basis for the development and utilization of the medium and low grade iron ore in West Africa. [ABSTRACT FROM AUTHOR]

The distributed permutation flow shop scheduling problem (DPFSP) is one of the hottest issues in the context of economic globalization. In this paper, a Q-learning enhanced fruit fly optimization algorithm (QFOA) is proposed to solve the DPFSP with the goal of minimizing the makespan. First, a hybrid strategy is used to cooperatively initialize the position of the fruit fly in the solution space and the boundary properties are used to improve the operation efficiency of QFOA. Second, the neighborhood structure based on problem knowledge is designed in the smell stage to generate neighborhood solutions, and the Q-learning method is conducive to the selection of high-quality neighborhood structures. Moreover, a local search algorithm based on key factories is designed to improve the solution accuracy by processing sequences of subjobs from key factories. Finally, the proposed QFOA is compared with the state-of-the-art algorithms for solving 720 well-known large-scale benchmark instances. The experimental results demonstrate the most outstanding performance of QFOA. [ABSTRACT FROM AUTHOR]

This study presents a novel cooperative bird-driving strategy utilizing unmanned aerial vehicles (UAV) swarms, specifically designed for airport environments, to mitigate the risks posed by bird interference with aircraft operations. Our approach introduces a target trajectory prediction framework that integrates Long Short-Term Memory (LSTM) networks with Kalman Filter algorithms (KF), improves the response speed of UAV swarms in bird-driving tasks, optimizes task allocation, and improves the accuracy and precision of trajectory prediction, making the entire bird-driving process more efficient and accurate. Within this framework, UAV swarms collaborate to drive birds that encroach upon designated protected areas, thereby optimizing bird-driving operations. We present a distributed collaborative bird-driving strategy to ensure effective coordination among UAV swarm members. Simulation experiments demonstrate that our strategy effectively drives dynamically changing targets, preventing them from remaining within the protected area. The proposed solution integrates dynamic target trajectory prediction using LSTM and Kalman Filter, task assignment optimization through the Hungarian algorithm, and 3D Dubins path planning. This innovative approach not only improves the operational efficiency of bird-driving in airport environments but also highlights the potential of UAV swarms to perform airborne missions in complex scenarios. Our work makes a significant contribution to the field of UAV swarm collaboration and provides practical insights for real-world applications. [ABSTRACT FROM AUTHOR]

Virtual synchronous generators (VSGs) have attracted widespread attention due to their advantage in supporting voltage and frequency of power systems. However, relevant studies have shown that a VSG has similar low-frequency oscillation as synchronous generators, which is more likely to occur under strong grid conditions. In this paper, the linearized mathematical model of a VSG is established by using small-signal analysis; based on this, the physical process of low-frequency oscillation of a VSG is explained from the perspective of vector motion. Firstly, the amplitude and phase motion of the current vector of a VSG under small disturbance are analyzed, then the mechanism of negative damping caused by terminal voltage control is revealed, and the reason why a VSG is more prone to instability under strong grid conditions is explained. Based on these, the influence of control and grid strength on the low-frequency oscillation of a VSG is analyzed. Studies show that the amplitude motion of the output current is the main cause of negative damping, and the oscillation can be suppressed by optimizing the value of key parameters. [ABSTRACT FROM AUTHOR]

Blade wear is the critical problem in the operation of multiphase pump. This paper presents a numerical study of the multiphase flow of multiphase pump. The trajectory of particles in the pump is calculated by the discrete phase model. Then, the simulation results are compared with the model test results of the pump to verify the correctness of the simulation method. The results show that the particles in the impeller domain are mainly near the hub, and the particles in the diffuser domain form a agglomerated area in the middle of the flow channel. The average wear rate of the impeller is more affected by the particle size than that of the diffuser. The maximum wear rate of blade surface increases first and then decreases with the increase of particle size. According to the wear data under different particle sizes, the regression model between particle size and wear rate is fitted to predict the wear of mixed transport pump in actual operation. The research results have important reference value for the prediction of the wear performance of the multiphase pump. [ABSTRACT FROM AUTHOR]

Purpose: To explore the clinical application of one‐piece polyetheretherketone (PEEK) removable partial dentures (RPDs) fabricated using a novel digital workflow and to evaluate their weights and fits in vivo and patient satisfaction. Materials and Methods: Fifteen cases with posterior partially edentulous situations were selected, and each patient received two types of RPDs, including a novel digital workflow (test group) and a conventional workflow (control group). For the test group, one‐piece RPDs were designed through three‐dimensional (3D) methods by scanning stone casts and fabricated by milling PEEK discs. Each RPD was weighed. The gaps between the oral tissue and RPDs in each group were duplicated using a polyvinylsiloxane (PVS) replica and measured by 3D analysis. A visual analog scale (VAS) was used to evaluate the patient's satisfaction. Paired t‐tests were used to compare the differences in the weight, the gaps of each RPD, and VAS values between the two groups. One‐way analysis of variance tests was used to compare the differences in the gap among different components in each group. Results: The RPD in the test group weighed less than that in the control group (p < 0.01). No statistically significant differences in the gaps of denture bases and rests (p > 0.05) were found between the two groups, but the gaps of major connectors in the test group were significantly smaller than in the control group (p < 0.05). The VAS scores for comfortableness and masticatory efficiency were not significantly different between the two groups (p > 0.05) but the scores for the aesthetic appearance of the clasps in the test group were significantly higher than that in the control group (p < 0.05). Conclusions: One‐piece PEEK RPDs manufactured using a novel digital workflow weighed less than conventional RPDs and exhibited a clinically acceptable internal fit. Although the aesthetic appearance of the PEEK clasps was superior to the control, there is still room for improvement. [ABSTRACT FROM AUTHOR]

Ammonium iodides are intensively investigated as effective interfacial passivation agents in perovskite solar cells (PSCs) while facing a major challenge of their high reactivity with perovskites that undermines the operational stability of the PSCs. Exemplified by involving rationally designed/selected peptide into the widely adopted phenethylammonium iodide (PEAI), the present work demonstrates that the bespoke peptide‐PEAI can effectively inhibit the deprotonation of ammonium iodides and thus hinder the formation of 2D perovskite, facilitating the stability enhancement in perovskite films by multi hydrogen bonding. The additional lone pair electrons provided by peptide molecules can also enhance the passivation ability of the modified layer. Attributed to the stable co‐modifier peptide‐PEAI, the small‐area FAPbI3‐based PSCs yield a high efficiency of 25.02% with robust light and thermal stabilities. Moreover, the peptide‐PEAI‐based minimodules with an efficiency of 19.06% for a total area of 36 cm2 manifested the great application potential of this co‐modification strategy in the perovskite photovoltaics. [ABSTRACT FROM AUTHOR]

Simple Summary: This study extended the use of Track 3D trajectory instruments to investigate the previously unobserved nocturnal activities of Spodoptera frugiperda (Lepidoptera: Noctuidae), a species of moth Noctuidae. The results indicate that flying and wing flapping are the most common activities, with observed flight patterns including parabolic, circular, and zigzag trajectories. Spodoptera frugiperda, also known as the fall armyworm (FAW), is classified by the Food and Agriculture Organization of the United Nations (FAO) as a major agricultural pest. By gaining a more nuanced understanding of the fall armyworm's courtship behavior, simpler and more environmentally friendly methods of controlling this pest can be developed. This study used the Track 3D system to meticulously record and describe the activity characteristics and patterns of adult males and females during courtship. The results show that adult FAWs engaged in a variety of activities during courtship that were either discrete (flying, flapping, moving, and crawling), continuous (flapping + flying, flapping + crawling, and flying + crawling), or combined (flapping + touching + flapping; flying + touching + flying). Flying and flapping were the most common activities, with observed flight patterns consisting of parabolic, circular, and zigzag trajectories. The peak activity times for adult FAWs are mainly concentrated at 11:00 p.m., 3:00 a.m., and 5:00 a.m., providing fundamental data for the precise attraction and control of adult FAWs at later stages. [ABSTRACT FROM AUTHOR]

MgO and Na2CO3 are used instead of strong alkalis (e.g., NaOH, NaOH+Na2SiO3) to prepare alkali-activated slag cement, achieving the promotion and use of green-economic alkali activators. In this study, the hydration reaction kinetics, hydration products, mechanical evolution, and microstructure characteristics of MgO-Na2CO3 activated slag (MNAS) system are studied. The results show that adding Na2CO3(>1%) prolongs the time of the second exothermic diffraction peak, and inhibits the hydration of the MNAS system in the early stage. The addition of Na2CO3 increases the 28 day compressive strength of the MNAS system. However, at 90 days, with the higher content of Na2CO3 , the SiO4, and AlO4 at the Q2 site are dechained, the peak value at the Q0 site increases, the mean chain length (MCL) of the gel phase decreases, the total pore volume increases, cracks appeared in the internal structure, and the compressive strength decreases. Na2CO3 mixing of 3%, 5%–8%, and 10% is appropriate when using S-type, M-type, and R-type MgO. The MNAS system is excellent from the aspects of CO2 emission, energy consumption, and cost of the alkali-activated materials. [ABSTRACT FROM AUTHOR]

This study investigates the effects of breeds, feeding methods, and parts on the volatile flavor of yak meat. Gas chromatography–ion mobility spectrometry (GC-IMS) and multivariate analysis were used to analyze the volatile organic components (VOCs) in yak meat from various sources. A total of 71 volatile compounds were identified, 53 of which were annotated based on the GC-IMS database. These include 20 alcohols, 16 ketones, 10 aldehydes, four alkenes, one ester, one acid, and one furan. Using VOC fingerprinting and multivariate analysis, yak meats from different sources were distinctly categorized. Breed had the most significant impact on yak meat VOCs, followed by feeding method and then part. Six volatiles with a variable importance in projection value greater than one were identified as potential markers for distinguishing yak meat. This study offers insights into the flavor profile of yak meat from different sources and demonstrates the efficacy of GC-IMS and multivariate analysis in characterizing and discriminating meats. [ABSTRACT FROM AUTHOR]

The tracking-resistant silicone rubber with superior water resistance is very essential for outdoor high-voltage transmission field. In this work, aminepropyltriethoxysilane-immobilized silica (APTES-SiO2) was prepared through dehydration condensation between the ethoxy groups of aminepropyltriethoxysilane (APTES) and hydroxyl groups on the SiO2 surface. The effects of APTES-SiO2 on the vulcanization, mechanical properties, thermal stability and tracking resistance of addition-cure liquid silicone rubber (ALSR) were studied. The results revealed that APTES-SiO2 and platinum catalyst (Pt) synergistically improved the tracking resistance of ALSR, and APTES-SiO2/ALSR also possessed excellent water resistance. When the content of APTES and Pt was 0.15 phr (parts per hundreds of rubber) and 15 ppm (parts per million), respectively, APTES-SiO2/ALSR reached 1A4.5 level. Furthermore, the tracking resistance of ALSR showed little deterioration even after immersion in water for 30 days. The results of thermogravimetry (TG) and thermogravimetry-Fourier transform infrared spectroscopy (TG-FTIR) indicated that APTES-SiO2 and Pt synergistically promoted the radical crosslinking of ALSR chains at high temperature, which was favorable to the formation of compact ceramic protected layer, thus significantly improved the tracking resistance of ALSR. [ABSTRACT FROM AUTHOR]

Approximately 40% of limited-stage (stage I and II) diffuse large B-cell lymphoma (LS-DLBCL) presents with extranodal disease. Extranodal LS-DLBCL may have significant biological differences and associated with worse outcomes than nodal disease. Although rituximab based chemoimmunotherapy is standard of first-line treatment, the role of consolidative radiotherapy (RT) in this particular subgroup is controversial. In this multicenter retrospective study, we evaluated the survival benefit of consolidative RT in patients diagnosed with extranodal LS-DLBCL and received rituximab-based chemoimmunotherapy with or without consolidative RT. A total of 328 patients were included, 129 patients (39.3%) received chemoimmunotherapy and consolidative RT, and 199 patients (60.7%) received chemoimmunotherapy alone. With a median follow-up of 5.1 years (range, 0.3–14.8 years), 5-year progression-free survival (PFS) and overall survival (OS) for all patients were 75.4% and 83.9%, respectively. In multivariate analyses, the addition of consolidative RT was associated with superior OS (P = 0.004) and PFS (P = 0.005). High stage-modified International Prognosis Index (SM-IPI) risk predicted worse OS (P = 0.001) and PFS (P = 0.005). Also, propensity score-matched analyses showed RT improved both OS (hazard ratio [HR] 0.228, 95% confidence index [CI] 0.111–0.467, P < 0.001) and PFS (HR 0.308, 95% CI 0.167–0.566, P < 0.001). Among patients who achieved CR, 49 patients (16.6%) developed disease relapse, of which 30.6% relapsed at local sites. Consolidative RT significantly reduced relapse risk (P = 0.002). Our results demonstrated that consolidative RT significantly improved outcomes in patients with extranodal LS-DLBCL in the rituximab era. [ABSTRACT FROM AUTHOR]

The development of CO2 separation membranes with high permeability and high selectivity, as well as ultra-thin selective layers, has always been challenging. Herein, a molecular-scaled co-assembly strategy is employed to fabricate the Pebax-Mo132 (Pebax = polyether-block-amide copolymer; Mo132 = (NH4)42[Mo72VIMo60VO372(CH3COO)30(H2O)72]) membranes. The optimal self-standing membrane, Pebax-Mo132-5%, shows a CO2 permeability of ∼384 Barrer and an ultra-high ideal CO2/N2 selectivity of ∼244, outperforming most membranes reported in the literature. The CO2 permeability and ideal CO2/N2 selectivity are increased by 70% and 367%, respectively, compared with the pristine Pebax membrane. A thin-film composite membrane prepared by spin-coating technique on a support membrane with gutter layers also exhibits a CO2 permeance of 838 GPU and a CO2/N2 selectivity of 136. Such excellent performance can be attributed to the following reasons: (1) strong hydrogen bonding interactions between {Mo132} clusters and Pebax confer excellent interfacial compatibility to the mixed matrix membranes; (2) incorporation of hollow {Mo132} clusters into the Pebax molecular chain decreases the crystallinity of Pebax, and thereby accelerates the chain dynamics and increases the free volume of the membrane; (3) in situ diffuse reflectance infrared Fourier-transform spectroscopy demonstrates that the {Mo132} clusters can effectively catalyze the hydration reaction of CO2 and promote the transport of CO2; (4) furthermore, the 0.35 nm pores of the crown ether-type {Mo9O9} allow the accurate size sieving of CO2 (0.33 nm) and N2 (0.36 nm) molecules. [ABSTRACT FROM AUTHOR]

Aims: The primary objective of this investigation is to establish an animal model that accurately represents skeletal muscle injury as a consequence of decompression sickness. Additionally, this study aims to delineate the potential mechanisms underlying the development and progression of skeletal muscle damage associated with decompression sickness. Materials and methods: (1) In this research, rats were utilized as experimental models and subjected to 600 kPa pressure in an air medium for a duration of 60 min, followed by decompression at a consistent rate of 1.5 min to reach atmospheric pressure in order to establish an animal model for decompression injury. Assessment of decompression injury involved the observation of general symptoms and signs, as well as histopathological examination of lung tissue to determine the extent of damage in the pulmonary system of rats. (2) Building on the rat decompression injury model, we conducted pathological and serological examinations to assess the status of rat skeletal muscle. Additionally, we investigated the signaling mechanism of the TLR9-MyD88 pathway in mediating alterations in rat skeletal muscle resulting from decompression injury, and evaluated the effects of decompression injury on apoptosis in rat skeletal muscle. Results: Repeated decompression induces significant damage to skeletal muscle tissue, characterized by edema, fiber rupture, and atrophy. This process also leads to a transient elevation in creatine kinase (CK-MM) levels in rat serum, as well as an upregulation of proteins such as TLR9, MyD88, p38, and ERK in rat skeletal muscle tissue. Furthermore, repeated decompression results in a temporary increase in the transcription levels of Atrogen-1mRNA and MuRF-1mRNA in rat skeletal muscle tissue. Discussion: The decompression protocol applied in this study successfully induced decompression sickness in a rat model, leading to skeletal muscle damage that was consistent with the expected pathology of decompression injury. Despite the initial injury, the rats showed evidence of adaptation following prolonged exposure to decompression conditions. [ABSTRACT FROM AUTHOR]

Although high‐efficiency host‐sensitizer‐TBRb‐based organic light‐emitting diodes (HST‐OLEDs) are widely reported, the reasons for their high performances are still vague because the important role of hot exciton in TBRb emitter (T2, TBRb) has not been recognized previously. Herein, a maximum external quantum efficiency (EQE) of 24.9% is obtained from a HST‐OLED by co‐doping the Ir(ppy)3 sensitizer and TBRb emitter into the CBP host. Such a remarkable efficiency is mainly attributed to the efficient utilization of the T2, TBRb via the cascade Dexter energy transfer (DET) channels from triplet excitons of host and sensitizer to T2, TBRb (T1, CBP→DET$\mathop \to \limits^{{\mathrm{DET}}} $ T1, Ir(ppy)3→DET$\mathop \to \limits^{{\mathrm{DET}}} $ T2, TBRb) followed by the hot‐exciton reverse intersystem crossing (RISC, T2, TBRb→RISC$\mathop \to \limits^{{\mathrm{RISC}}} $ S1, TBRb) and triplet fusion (TF, T2, TBRb + T2, TBRb→TF$\mathop \to \limits^{{\mathrm{TF}}} $ Sm, TBRb→IC$\mathop \to \limits^{{\mathrm{IC}}} $ S1, TBRb) processes for radiative decays. These cascade DET channels are demonstrated by spectroscopic analyses and magneto‐electroluminescence studies. More importantly, this HST‐OLED presents an extremely low‐efficiency roll‐off, that is, the EQEs separately exhibit 24.34% and 19.73% at 1000 and 10 000 cd m−2 compared to the maximum EQE of 24.9%. Obviously, this work paves a promising pathway for fabricating further high‐efficiency HST‐OLEDs for applications in illumination and flat‐panel display. [ABSTRACT FROM AUTHOR]

The coral reef ecosystem is one of the most productive ecosystems in the ocean, and is also an important calcium carbonate deposition region. Because excess production is very low in coral reefs, organic carbon reservoirs are very limited. During the calcification process, each mole of CaCO3 will produce 1 mol of CO2, approximately 60% of which will be released into the atmosphere through the sea-air interface. This causes coral reefs to be large inorganic carbon reservoirs, but at the same time, most coral reefs act as atmospheric CO2 sources (which also act as sinks in some coral reefs). Therefore, clarifying the sea-air CO2 exchange flux and carbon storage is critical for understanding the carbon cycle in coral reef ecosystems. In this paper, we summarize the carbon cycle processes in the coral reefs of the South China Sea (SCS) and estimate the total CO2 budget and carbon reserves. According to current research, the coral reefs in this area act as a source of atmospheric CO2, releasing 0.37-1.59 × 1011 g C a-1 into the atmosphere. Owing to their extremely high biological productivity and carbonate productivity, the carbon reserves of coral reefs in the SCS range from 1.66-3.78 × 1012gCa-1, which is an order of magnitude greater than the CO2 emissions at the sea-air interface. Overall, coral reefs in the SCS are important carbon storage areas. As the current results are still approximate, a more comprehensive and indepth investigation is needed to clarify the carbon source/sink processes, regulatory mechanisms, and carbon storage capacity of SCS coral reefs. [ABSTRACT FROM AUTHOR]

In this study, the abrasive impact wear behaviour of a bimetal composite made of medium manganese steels (MMSs) and low carbon steels (LCSs), i.e., the Mn8/SS400 bimetal composite, was investigated using a newly designed wear-testing rig. The need for a new rig arose from the difficulty in replicating real-world wear conditions. Our rig allows for precise control and measurement of wear, simulating harsh environments more accurately than other wear-testing rigs. The bimetal composite Mn8/SS400 demonstrated superior wear resistance, showing an improvement of up to 2.8 times compared to benchmark steels, attributed to its enhanced work hardening sensitivity. Scanning electron microscopy (SEM), X-ray diffractometer (XRD), and electron backscatter diffraction (EBSD) analyses were employed to elucidate the wear mechanisms. After 300 h of abrasive impact wear, the subsurface microhardness of Mn8 reached 601.31 HV, significantly higher than that of the matrix hardness of 292.24 HV, indicating a substantial work hardening effect. The wear mechanism of the Mn8/SS400 bimetal composite was found to be a synergistic effect of grain refinement strengthening, dislocation strengthening, and twin strengthening. Initially, twin strengthening was the dominant mechanism up to 200 h of wear testing. However, after 300 h, contributions from all three mechanisms became increasingly significant, enhancing the overall wear resistance of the composite. [ABSTRACT FROM AUTHOR]

This document provides an overview of recent advancements in petroleum and gas engineering. It highlights the importance of oil and natural gas resources as crucial energy sources, although they are considered non-renewable. The document discusses the global trends in natural gas development and ongoing research in coal mining. It also emphasizes the need for research in key aspects of oil and gas engineering, such as logging, reservoir properties, drilling, and pipeline safety. The document further summarizes recent research papers in the field, covering topics such as reservoir characteristics, logging techniques, extraction techniques, geological characteristics, pipeline safety, and crude oil quality enhancement. It concludes by suggesting future research directions in oil and gas engineering, including intelligent and automated technologies and advanced equipment development. [Extracted from the article]

Lithium salt-doped spiro-OMeTAD is widely used as a hole-transport layer (HTL) for high-efficiency n-i-p perovskite solar cells (PSCs), but unfortunately facing awkward instability for commercialization arising from the intrinsic Li+ migration and hygroscopicity. We herein demonstrate a superoxide radicals (•O2−) derived HTL of metal-free spiro-OMeTAD with remarkable capability of avoiding the conventional tedious oxidation treatment in air for highly stable PSCs. Present work explores the employing of variant-valence Eu(TFSI)2 salts that could generate •O2− for facile and adequate pre-oxidation of spiro-OMeTAD, resulting in the HTL with dramatically increased conductivity and work function. Comparing to devices adopting HTL with LiTFSI doping, the •O2−-derived spiro-OMeTAD increases the PSCs efficiency up to 25.45% and 20.76% for 0.05 cm2 active area and 6 × 6 cm2 module, respectively. State-of-art PSCs employing such metal-free HTLs are also demonstrated to show much-improved environmental stability even under harsh conditions, e.g., maintaining over 90% of their initial efficiency after 1000 h of operation at the maximum power point and after 80 light-thermal cycles under simulated low earth orbit conditions, respectively, indicating the potentials of developing metal-free spiro-OMeTAD for low-cost and shortened processing of perovskite photovoltaics. The migration and hygroscopicity of lithium salt in doped spiro-OMeTAD hampers the device efficiency of perovskite solar cells. Here, the authors employ Eu(TFSI)2 salts to generate superoxide radical for facile pre-oxidation, achieving enhanced efficiency and stability of solar cells and modules. [ABSTRACT FROM AUTHOR]

Background: Long-term accumulation of misfolded proteins leads to endoplasmic reticulum (ER) stress in colorectal cancer (CRC). However, the precise pathways controlling the decision between survival and apoptosis in CRC are unclear. Therefore, in this study, we investigated the function and molecular mechanism of glucosidase I (GCS1) in regulating ER stress in CRC. Methods: A public database was used to confirm the expression level of GCS1 in CRC and normal tissues. Clinical samples from our center were used to confirm the mRNA and protein expression levels of GCS1. Cell proliferation, migration, invasion, and apoptosis assays revealed the biological role of GCS1. Immunohistochemical techniques were used to evaluate the expression of key proteins in subcutaneous implanted tumors in nude mice, which provided further evidence for the biological function of GCS1 in promoting cancer in vivo. The results of coimmunoprecipitation-mass spectrometry analysis and immunofluorescence colocalization analysis the interaction between GCS1 and GRP78. In addition, the mechanism of action of USP10, GRP78, and GCS1 at the post- translational level was investigated. Finally, a tissue microarray was used to examine the connection between GCS1 and GRP78 expression and intracellular localization of these proteins using immunohistochemistry and immunofluorescence. Results: The experimental results revealed that GCS1 was substantially expressed in CRC, with higher expression indicating a worse prognosis. Thus, GCS1 can enhance the proliferation and metastasis while inhibiting the apoptosis of CRC cells both in vivo and in vitro. Mechanistically, GCS1 binds to GRP78, recruits USP10 for deubiquitination of GRP78 to promote its degradation, and decreases ER stress-mediated apoptosis, increasing CRC cell proliferation and metastasis. Conclusions: In summary, GCS1 stimulates CRC growth and migration and reduces ER stress-mediated apoptosis via USP10-mediated deubiquitination of GRP78. Our findings identify a possible therapeutic target for CRC. [ABSTRACT FROM AUTHOR]

The miniaturization of antennas is crucial as it improves the integration of wireless communication system. In order to achieve miniaturization of antennas, a performance-constrained multi-objective optimization method (PCMOM) considering the size and return loss is proposed. In the PCMOM method, an optimization strategy based on a multi-port network model is introduced, enabling the formation of antennas with various structures. Furthermore, we integrate the constraint of return loss performance into the non-dominated sorting genetic algorithm II (NSGA-II), eliminating solutions that do not meet performance requirements. Three pixel antennas are designed using the PCMOM method and two of them are fabricated. Experimental results demonstrate that the proposed PCMOM method can effectively address the complex trade-off issues in antenna miniaturization design. [ABSTRACT FROM AUTHOR]

Background: Cotton pests have a major impact on cotton quality and yield during cotton production and cultivation. With the rapid development of agricultural intelligence, the accurate classification of cotton pests is a key factor in realizing the precise application of medicines by utilize unmanned aerial vehicles (UAVs), large application devices and other equipment. Methods: In this study, a cotton insect pest classificationmodel based on improved Swin Transformer is proposed. The model introduces the residual module, skip connection, into Swin Transformer to improve the problem that pest features are easily confused in complex backgrounds leading to poor classification accuracy, and to enhance the recognition of cotton pests. In this study, 2705 leaf images of cotton insect pests (including three insect pests, cotton aphids, cotton mirids and cotton leaf mites) were collected in the field, and after image preprocessing and data augmentation operations, model training was performed. Results: The test results proved that the accuracy of the improvedmodel compared to the original model increased from 94.6% to 97.4%, and the prediction time for a single image was 0.00434s. The improved Swin Transformer model was compared with seven kinds of classification models (VGG11, VGG11-bn, Resnet18, MobilenetV2, VIT, Swin Transformer small, and Swin Transformer base), and the model accuracy was increased respectively by 0.5%, 4.7%, 2.2%, 2.5%, 6.3%, 7.9%, 8.0%. Discussion: Therefore, this study demonstrates that the improved Swin Transformer model significantly improves the accuracy and efficiency of cotton pest detection compared with other classification models, and can be deployed on edge devices such as utilize unmanned aerial vehicles (UAVs), thus providing an important technological support and theoretical basis for cotton pest control and precision drug application. [ABSTRACT FROM AUTHOR]

Lithium salt-doped spiro-OMeTAD is widely used as a hole-transport layer (HTL) for high-efficiency n-i-p perovskite solar cells (PSCs), but unfortunately facing awkward instability for commercialization arising from the intrinsic Li+ migration and hygroscopicity. We herein demonstrate a superoxide radicals (•O2−) derived HTL of metal-free spiro-OMeTAD with remarkable capability of avoiding the conventional tedious oxidation treatment in air for highly stable PSCs. Present work explores the employing of variant-valence Eu(TFSI)2 salts that could generate •O2− for facile and adequate pre-oxidation of spiro-OMeTAD, resulting in the HTL with dramatically increased conductivity and work function. Comparing to devices adopting HTL with LiTFSI doping, the •O2−-derived spiro-OMeTAD increases the PSCs efficiency up to 25.45% and 20.76% for 0.05 cm2 active area and 6 × 6 cm2 module, respectively. State-of-art PSCs employing such metal-free HTLs are also demonstrated to show much-improved environmental stability even under harsh conditions, e.g., maintaining over 90% of their initial efficiency after 1000 h of operation at the maximum power point and after 80 light-thermal cycles under simulated low earth orbit conditions, respectively, indicating the potentials of developing metal-free spiro-OMeTAD for low-cost and shortened processing of perovskite photovoltaics. The migration and hygroscopicity of lithium salt in doped spiro-OMeTAD hampers the device efficiency of perovskite solar cells. Here, the authors employ Eu(TFSI)2 salts to generate superoxide radical for facile pre-oxidation, achieving enhanced efficiency and stability of solar cells and modules. [ABSTRACT FROM AUTHOR]

Electrocatalytic hydrogen evolution reaction (HER) via alkaline water splitting holds great promise for industrial clean hydrogen production but is frustrated by limited catalytic activity and inferior stability under high current density. Elaborate manipulating of heterostructure on robust catalytic electrodes is essential but challenging for accelerating HER kinetics with high durability. Herein, a robust nickel mesh electrode, offering high mechanical stability, is directly engineered with catalytic layers of multiple heterostructures (r‐Mn–Ni/CoP) via facile one‐pot electrodeposition followed by surface reconstruction strategy. The abundant heterostructures composed of crystalline CoP, NiP, amorphous region, and additional Mn doping considerably manipulate the electronic structure with optimized charge transfer; while the in situ surface‐reconstructed hydrophilic nanoflakes enable the rapid wetting of active sites to the electrolyte. Consequently, the r‐Mn–Ni/CoP requires only 134 mV overpotential at the current density of 100 mA cm−2, superior to monophasic and undoped samples, and the majority of reported HER catalysts. Remarkably, an electrolyzer with r‐Mn–Ni/CoP on a nickel mesh cathode demonstrates extraordinary activity with a voltage of 1.734 V at 300 mA cm−2 and stable operation of 800 h. The finding provides a feasible strategy for the fabrication of nonprecious‐metal‐based HER electrocatalysts with high activity and stability toward industrial water electrolysis. [ABSTRACT FROM AUTHOR]

Background: Pulmonary fibrosis (PF) is an aging-related progressive lung disorder. The aged lung undergoes functional and structural changes termed immunosenescence and inflammaging, which facilitate the occurrence of fibrosis. Interleukin-10 (IL-10) is a potent anti-inflammatory and immunoregulatory cytokine, yet it remains unclear how IL-10 deficiency-induced immunosenescence participates in the development of PF. Methods: Firstly we evaluated the susceptibility to fibrosis and IL-10 expression in aged mice. Then 13-month-old wild-type (WT) and IL-10 knockout (KO) mice were subjected to bleomycin(BLM) and analyzed senescence-related markers by PCR, western blot and immunohistochemistry staining of p16, p21, p53, as well as DHE and SA-β-gal staining. We further compared 18-month-old WT mice with 13-month-old IL-10KO mice to assess aging-associated cell senescence and inflamation infiltration in both lung and BALF. Moreover, proliferation and apoptosis of alveolar type 2 cells(AT2) were evaluated by FCM, immunofluorescence, TUNEL staining, and TEM analysis. Recombinant IL-10 (rIL-10) was also administered intratracheally to evaluate its therapeutic potential and related mechanism. For the in vitro experiments, 10-week-old naïve pramily lung fibroblasts(PLFs) were treated with the culture medium of 13-month PLFs derived from WT, IL-10KO, or IL-10KO + rIL-10 respectively, and examined the secretion of senescence-associated secretory phenotype (SASP) factors and related pathways. Results: The aged mice displayed increased susceptibility to fibrosis and decreased IL-10 expression. The 13-month-old IL-10KO mice exhibited significant exacerbation of cell senescence compared to their contemporary WT mice, and even more severe epithelial-mesenchymal transition (EMT) than that of 18 month WT mice. These IL-10 deficient mice showed heightened inflammatory responses and accelerated PF progression. Intratracheal administration of rIL-10 reduced lung CD45 + cell infiltration by 15%, including a 6% reduction in granulocytes and a 10% reduction in macrophages, and increased the proportion of AT2 cells by approximately 8%. Additionally, rIL-10 significantly decreased α-SMA and collagen deposition, and reduced the expression of senescence proteins p16 and p21 by 50% in these mice. In vitro analysis revealed that conditioned media from IL-10 deficient mice promoted SASP secretion and upregulated senescence genes in naïve lung fibroblasts, which was mitigated by rIL-10 treatment. Mechanistically, rIL-10 inhibited TGF-β-Smad2/3 and PTEN/PI3K/AKT/ERK pathways, thereby suppressing senescence and fibrosis-related proteins. Conclusions: IL-10 deficiency in aged mice leads to accelerated cell senescence and exacerbated fibrosis, with IL-10KO-PLFs displaying increased SASP secretion. Recombinant IL-10 treatment effectively mitigates these effects, suggesting its potential as a therapeutic target for PF. [ABSTRACT FROM AUTHOR]

Inverted NiOx‐based perovskite solar cells (PSCs) exhibit considerable potential because of their low‐temperature processing and outstanding excellent stability, while is challenged by the carriers transfer at buried interface owing to the inherent low carrier mobility and abundant surface defects that directly deteriorates the overall device fill factor. Present work demonstrates a chemical linker with the capability of simultaneously grasping NiOx and perovskite crystals by forming a Ni−S−Pb bridge at buried interface to significantly boost the carriers transfer, based on a rationally selected molecule of 1,3‐dimethyl‐benzoimidazol‐2‐thione (NCS). The constructed buried interface not only reduces the pinholes and needle‐like residual PbI2 at the buried interface, but also deepens the work function and valence band maximum positions of NiOx, resulting in a smaller VBM offset between NiOx and perovskite film. Consequently, the modulated PSCs achieved a high fill factor up to 86.24 %, which is as far as we know the highest value in records of NiOx‐based inverted PSCs. The NCS custom‐tailored PSCs and minimodules (active area of 18 cm2) exhibited a champion efficiency of 25.05 % and 21.16 %, respectively. The unencapsulated devices remains over 90 % of their initial efficiency at maximum power point under continuous illumination for 1700 hours. [ABSTRACT FROM AUTHOR]

All‐inorganic cesium lead triiodide perovskites (CsPbI3) have attracted increasing attention due to their good thermal stability, remarkable optoelectronic properties, and adaptability in tandem solar cells. However, N2‐filled glovebox is generally required to strictly control the humidity during film fabrication due to the moisture‐induced black‐to‐yellow phase transition, which remains a great hinderance for further commercialization. Herein, we report an effective approach via incorporating multifunctional ethacridine lactate (EAL) to mitigate moisture invasion and enable the fabrication of efficient inverted (p‐i‐n) CsPbI3 perovskite solar cells (PSCs) under ambient condition. It is revealed that the lactate anions accelerate the crystallization of CsPbI3, shortening the exposure time to moisture during film fabrication. Meanwhile, the conjugated backbone and multiple functional groups in the ethacridine cations can interact with I− and Pb2+ to reduce the undesired defects, stabilize the perovskite structure and facilitate the charge transport in the film. Moreover, EAL incorporation also leads to better energy alignment, thus favoring charge extraction at both upper and bottom interfaces. Consequently, the device efficiency and stability are enormously enhanced, with the champion efficiency reaching 21.08 %. This even surpasses the highest value reported for the devices fabricated in glovebox, representing a record efficiency of inverted all‐inorganic PSCs. [ABSTRACT FROM AUTHOR]