Search

The paper presents the design and technological fabrication process of Yin or Yang-shaped, micron-sized electromechanical system (MEMS) elements displaying asymmetric hollow cylinders with two different curvatures of the cylinder shell. By adapting the process steps, two neighboring shutter MEMS elements can either be attached to each other to create asymmetric hollow cylinders or remain disconnected to form curled cylindrical or ellipsoidal tubes or tube fractions. A novel 3D self-organization process has been developed to connect two neighboring shutter elements, exploiting surface tension forces via a sequential drying process. The process conditions have been analyzed and optimized to fabricate the two different geometries of the MEMS elements. The resulting MEMS system elements were characterized by focused ion beam and scanning electron microscopy. The contribution of Casimir force, van der Waals force, and other physical interfacial forces are discussed in the formation of the asymmetric hollow cylinders. [ABSTRACT FROM AUTHOR]

We proposed a model for adjusting Goosâ€"Hänchen (GH) shifts in a cavity with quantum dot (QD) nanostructure in this letter. The actual component of the susceptibility was studied by analytical solution of the coherence term of the density matrix elements, and the refractive index of the QD nanostructure was explored. We discovered that the intracavity medium became phase sensitive because of the electron tunneling action. As a result, the relative phase of applied lights may be used to manipulate the medium’s refraction index. The GH shifts in reflected and transmitted light beams in high refractive index QD nanostructures with diminishing probe absorption were next examined. We discovered that the GH shifts of reflected and transmitted lights are greatly influenced by the applied lights’ relative phase. We established that greater negative or positive GH shifts in reflected and transmitted photons are conceivable in the presence of electron tunneling. [ABSTRACT FROM AUTHOR]

In this study, we investigated the process of preconcentrate and determine trace amounts of Auramine O (AO) and methylene blue (MB) dyes in environmental water samples. For this purpose, the ultrasound-assisted dispersive-magnetic nanocomposites-solid-phase microextraction (UA-DMNSPME) method was performed to extract AO and MB from aqueous samples by applying magnesium oxide nanoparticles (MgO-NPs). The proposed technique is low-cost, facile, fast, and compatible with many existing instrumental methods. Parameters affecting the extraction of AO and MB were optimized using response surface methodology (RSM). Short extraction time, low experimental tests, low consumption of organic solvent, low limits of detection (LOD), and high preconcentration factor (PF) was the advantages of method. The PF was 44.5, and LOD for AO and MB was 0.33 ng mL−1 and 1.66 ng mL−1, respectively. The linear range of this method for AO and MB were 1–1000 ng mL−1 and 5–2000 ng mL−1, respectively. In addition, the relative standard deviation (RSD; n = 5) of the mentioned analytes was between 2.9% and 3.1%. The adsorption–desorption studies showed that the efficiency of adsorbent extraction had not declined significantly up to 6 recycling runs, and the adsorbent could be used several times. The interference studies revealed that the presence of different ions did not interfere substantially with the extraction and determination of AO and MB. Therefore, UA-DMNSPME-UV/Vis method can be proposed as an efficient method for preconcentration and extraction of AO and MB from water and wastewater samples. [ABSTRACT FROM AUTHOR]