Search

Diffusible iodine-based contrast-enhanced computed tomography (diceCT) is an increasingly used digital complement, supplement, or alternative to traditional dissection-based anatomical research. The diceCT protocol, which has evolved and expanded over the past decade, employs passive diffusion of Lugol's iodine (KI3) to increase soft tissue radiodensity and improve structure contrast in the CT or microCT imaging of specimens. The development and application of diceCT has focused largely on specimens under 1 kg, and the varying reporting of methods on studies of both small and large specimens has initiated, but not yet established, an effective diceCT protocol for larger specimens based on monitored experiments of several fundamental variables (e.g., Lugol's iodine concentration, duration, and impacts of Lugol's iodine on tissues). In this study, we have experimentally assessed the efficacy of diceCT protocols for imaging whole-body specimens of the 1–4.5 kg Australian brushtail possum (Trichosurus vulpecula) using sequential CT imaging assessment across experimental conditions. We assessed the impact of varying Lugol's iodine concentration, the presence/absence of skin, solution volume and agitation on tissue radiodensity changes through weekly CT-based monitoring of tissue radiodensities over an 8-week experimental period. We have also quantified tissue volumetric changes across our experiment to assess the impact of diceCT applications on subsequent analyses of imaging datasets. Our results indicate that substantial changes in both soft-tissue radiodensity and soft-tissue volume occur within the first 28 days of Lugol's iodine treatment, followed by a slower rate of progressive soft-tissue radiodensity and volume changes across the experiment duration. Our results demonstrate the negligible benefit of skinning larger specimens to improve solution diffusion, and document significant soft-tissue volumetric changes with high concentration solutions (e.g., 10%) and long-duration exposure (e.g., beyond 5 weeks) that should guide individual diceCT protocol design and/or quantification and analysis for mammal specimens above 1 kg. [ABSTRACT FROM AUTHOR]

Establishing relationships between soft tissues and bones in living species can inform our understanding of functional adaptations in their extinct kin in the absence of direct data on habitual behaviours. The koala and the wombats are the only surviving species of the vombatiform suborder, and represent the extant phylogenetic bracket for dozens of fossil marsupial species across nine families. Here we present the first quantitative architectural data on the forelimb myology of the koala and common wombat, alongside redescriptions based on physical and digital dissections. Despite obvious contrasts in how their forelimbs are used in arboreal (koala) and fossorial (wombat) functional contexts, overall they showed only minor differences in qualitative and quantitative measures of myology. When the architectural properties of antagonistic pairs of muscle groups crossing each joint were compared, the greatest contrasts were seen in muscles crossing the elbow, where the wombat exhibited greater relative emphasis on forceful elbow extension than the koala, indicative of adaptations for digging. Our findings reinforce the importance of the elbow as a useful system to explore when seeking discrimination between habitual patterns of forelimb use in extinct vombatiform species. [ABSTRACT FROM AUTHOR]

The relationship between ecology and morphology of the limbs in living placental mammals is well established and has been used to infer aspects of palaeobiology for many extinct species. However, few studies have applied these principles to extinct marsupials. Palorchestids are a poorly understood extinct family of megafaunal marsupials of particular interest due to their highly robust and unusual limb morphology. Using a comparative sample of humeri and femora from living mammals potentially analogous to palorchestids, we applied three-dimensional geometric morphometric techniques in a phylogenetic comparative framework. We established that humerus and femur shape in living species showed significant associations with size, phylogeny, and substrate use, and found a weak association between humeral shape and diet. We then examined patterns in morphological disparity, modularity, covariance and morphospace occupation in palorchestids relative to comparative living mammals as well as their closest extinct marsupial relatives. We found palorchestid femora to be unremarkable in shape, while their overall and proximal humeral morphology were strongly divergent from all other mammals sampled. Over their evolutionary history, palorchestid distal humeri increasingly resembled those of mammals adapted for tearing and hook-and-pull digging, while other analyses showed various arboreal-like and fossorial-like affinities in humeral shape. Our findings indicate strong asymmetric selection acting on the fore- and hindlimbs in palorchestids, and their unique combination of shape traits suggests they used their forelimbs in a specialised manner that has no direct equivalence either with their extinct relatives or among other mammals alive today. [ABSTRACT FROM AUTHOR]

True seals (phocids) have achieved a global distribution by crossing the equator multiple times in their evolutionary history. This is remarkable, as warm tropical waters are regarded as a barrier to marine mammal dispersal and—following Bergmann's rule—may have limited crossings to small‐bodied species only. Here, we show that ancestral phocids were medium sized and did not obviously follow Bergmann's rule. Instead, they ranged across a broad spectrum of environmental temperatures, without undergoing shifts in temperature‐ or size‐related evolutionary rates following dispersals across the equator. We conclude that the tropics have not constrained phocid biogeography. [ABSTRACT FROM AUTHOR]

Joint mobility is a key factor in determining the functional capacity of tetrapod limbs, and is important in palaeobiological reconstructions of extinct animals. Recent advances have been made in quantifying osteological joint mobility using virtual computational methods; however, these approaches generally focus on the proximal limb joints and have seldom been applied to fossil mammals. Palorchestes azael is an enigmatic, extinct ~1000 kg marsupial with no close living relatives, whose functional ecology within Australian Pleistocene environments is poorly understood. Most intriguing is its flattened elbow morphology, which has long been assumed to indicate very low mobility at this important joint. Here, we tested elbow mobility via virtual range of motion (ROM) mapping and helical axis analysis, to quantitatively explore the limits of Palorchestes' elbow movement and compare this with their living and extinct relatives, as well as extant mammals that may represent functional analogues. We find that Palorchestes had the lowest elbow mobility among mammals sampled, even when afforded joint translations in addition to rotational degrees of freedom. This indicates that Palorchestes was limited to crouched forelimb postures, something highly unusual for mammals of this size. Coupled flexion and abduction created a skewed primary axis of movement at the elbow, suggesting an abducted forelimb posture and humeral rotation gait that is not found among marsupials and unlike that seen in any large mammals alive today. This work introduces new quantitative methods and demonstrates the utility of comparative ROM mapping approaches, highlighting that Palorchestes' forelimb function was unlike its contemporaneous relatives and appears to lack clear functional analogues among living mammals. [ABSTRACT FROM AUTHOR]

Background: Morphological convergence is a fundamental aspect of evolution, allowing for inference of the biology and ecology of extinct species by comparison with the form and function of living species as analogues. The thylacine (Thylacinus cynocephalus), the iconic recently extinct marsupial, is considered a classic example of convergent evolution with the distantly related placental wolf or dog, though almost nothing is actually known regarding its ecology. This lack of data leads to questions regarding the degree of convergence with, and the similarity of, the functional ecology of the thylacine and the wolf/dog. Here, we examined the cranium of the thylacine using 3D geometric morphometrics and two quantitative tests of convergence to more precisely determine convergent analogues, within a phylogenetically informed dataset of 56 comparative species across 12 families of marsupial and placental faunivorous mammals. Using this dataset, we investigated patterns of correlation between cranial shape and diet, phylogeny, and relative prey size across these terrestrial faunivores. Results: We find a correlation between cranial, facial, and neurocranial shape and the ratio of prey-to-predator body mass, though neurocranial shape may not correlate with prey size within marsupials. The thylacine was found to group with predators that routinely take prey smaller than 45% of their own body mass, not with predators that take subequal-sized or larger prey. Both convergence tests find significant levels of convergence between the thylacine and the African jackals and South American 'foxes', with lesser support for the coyote and red fox. We find little support for convergence between the thylacine and the wolf or dog. Conclusions: Our study finds little support for a wolf/dog-like functional ecology in the thylacine, with it instead being most similar to mid-sized canids such as African jackals and South American 'foxes' that mainly take prey less than half their size. This work suggests that concepts of convergence should extend beyond superficial similarity, and broader comparisons can lead to false interpretations of functional ecology. The thylacine was a predator of small to mid-sized prey, not a big-game specialist like the placental wolf. [ABSTRACT FROM AUTHOR]

Most of the diversity of extant southern true seals (Phocidae: Monachinae) is present in the Southern Ocean, but a poor fossil record means that the origin of this fauna remains unknown. Australia represents a large gap in the record bordering the Southern Ocean that could possibly inform on the origins of the extant Antarctic monachines, with most known fossils remaining undescribed. Here we describe the oldest Australian fossil pinniped assemblage, from the Late Miocene to the Early Pliocene of Beaumaris. Two fossils are referrable to Pinnipedia, five (possibly six) to Phocidae and a humerus is referrable to Monachinae. The humerus is not referrable to any extant tribe, potentially representing an archaic monachine. The description of this assemblage is consistent with the Neogene pinniped fauna of Australia being exclusively monachine before the arrival of otariids (fur seals and sea lions). The Beaumaris humerus, along with other Neogene phocids from the Southern Ocean margins, were smaller than their extant Antarctic relatives, possibly driven by longer food chains with less energy efficiency between trophic levels. This suggests that small archaic phocids potentially used the Southern Ocean as a means of dispersal before the arrival of extant Antarctic monachines. [ABSTRACT FROM AUTHOR]

Background: A major goal of evolutionary developmental biology is to discover general models and mechanisms that create the phenotypes of organisms. However, universal models of such fundamental growth and form are rare, presumably due to the limited number of physical laws and biological processes that influence growth. One such model is the logarithmic spiral, which has been purported to explain the growth of biological structures such as teeth, claws, horns, and beaks. However, the logarithmic spiral only describes the path of the structure through space, and cannot generate these shapes. Results: Here we show a new universal model based on a power law between the radius of the structure and its length, which generates a shape called a 'power cone'. We describe the underlying 'power cascade' model that explains the extreme diversity of tooth shapes in vertebrates, including humans, mammoths, sabre-toothed cats, tyrannosaurs and giant megalodon sharks. This model can be used to predict the age of mammals with ever-growing teeth, including elephants and rodents. We view this as the third general model of tooth development, along with the patterning cascade model for cusp number and spacing, and the inhibitory cascade model that predicts relative tooth size. Beyond the dentition, this new model also describes the growth of claws, horns, antlers and beaks of vertebrates, as well as the fangs and shells of invertebrates, and thorns and prickles of plants. Conclusions: The power cone is generated when the radial power growth rate is unequal to the length power growth rate. The power cascade model operates independently of the logarithmic spiral and is present throughout diverse biological systems. The power cascade provides a mechanistic basis for the generation of these pointed structures across the tree of life. [ABSTRACT FROM AUTHOR]

Despite decades of research, the systematics of extinct true seals (Phocidae) is still overly reliant on morphological data from extant taxa. As a result, monk seals (Monachini) have been interpreted as 'archaic' despite an absence of fossil data to support this hypothesis. This has affected systematic hypotheses for extinct phocids, including fossils from Australasia. Recent finds from New Zealand indicate that the first seal fossils described from Australia, two temporal bones from the late Miocene–early Pliocene (6.24–4.35 Ma), need to be revisited. Here we re-describe these temporal bones and find them to represent monk seals. This places the oldest known fossils of this group in the Southern Hemisphere, implying monk seals had a longer history at southern latitudes. Our ancestral state estimation of the temporal bone morphology of monachines indicates that monk seal temporals may be derived, rather than plesiomorphic as has previously been assumed. This suggests that an over-reliance on the morphology of extant true seals may be obscuring the true diversity of both stem- and crown-phocids, and indicates that a rethink of the morphology underlying the taxonomic assessments of fragmentary true seal fossils is needed. [ABSTRACT FROM AUTHOR]

The teaching of medical pathology has undergone significant change in the last 30–40 years, especially in the context of employing bottled specimens or 'pots' in classroom settings. The reduction in post-mortem based teaching in medical training programs has resulted in less focus being placed on the ability of students to describe the gross anatomical pathology of specimens. Financial considerations involved in employing staff to maintain bottled specimens, space constraints and concerns with health and safety of staff and student laboratories have meant that many institutions have decommissioned their pathology collections. This report details how full-colour surface scanning coupled with CT scanning and 3 D printing allows the digital archiving of gross pathological specimens and the production of reproductions or replicas of preserved human anatomical pathology specimens that obviates many of the above issues. With modern UV curable resin printing technology, it is possible to achieve photographic quality accurate replicas comparable to the original specimens in many aspects except haptic quality. Accurate 3 D reproductions of human pathology specimens offer many advantages over traditional bottled specimens including the capacity to generate multiple copies and their use in any educational setting giving access to a broader range of potential learners and users. [ABSTRACT FROM AUTHOR]

Living true seals (phocids) are the most widely dispersed semi-aquatic marine mammals, and comprise geographically separate northern (phocine) and southern (monachine) groups. Both are thought to have evolved in the North Atlantic, with only two monachine lineages--elephant seals and lobodontins--subsequently crossing the equator. The third and most basal monachine tribe, the monk seals, have hitherto been interpreted as exclusively northern and (sub)tropical throughout their entire history. Here, we describe a new species of extinct monk seal from the Pliocene of New Zealand, the first of its kind from the Southern Hemisphere, based on one of the best-preserved and richest samples of seal fossils worldwide. This unanticipated discovery reveals that all three monachine tribes once coexisted south of the equator, and forces a profound revision of their evolutionary history: rather than primarily diversifying in the North Atlantic, monachines largely evolved in the Southern Hemisphere, and from this southern cradle later reinvaded the north. Our results suggest that true seals crossed the equator over eight times in their history. Overall, they more than double the age of the north-south dichotomy characterizing living true seals and confirms a surprisingly recent major change in southern phocid diversity. [ABSTRACT FROM AUTHOR]

Living true seals (phocids) are the most widely dispersed semi-aquatic marine mammals, and comprise geographically separate northern (phocine) and southern (monachine) groups. Both are thought to have evolved in the North Atlantic, with only two monachine lineages--elephant seals and lobodontins--subsequently crossing the equator. The third and most basal monachine tribe, the monk seals, have hitherto been interpreted as exclusively northern and (sub)tropical throughout their entire history. Here, we describe a new species of extinct monk seal from the Pliocene of New Zealand, the first of its kind from the Southern Hemisphere, based on one of the best-preserved and richest samples of seal fossils worldwide. This unanticipated discovery reveals that all three monachine tribes once coexisted south of the equator, and forces a profound revision of their evolutionary history: rather than primarily diversifying in the North Atlantic, monachines largely evolved in the Southern Hemisphere, and from this southern cradle later reinvaded the north. Our results suggest that true seals crossed the equator over eight times in their history. Overall, they more than double the age of the north--south dichotomy characterizing living true seals and confirms a surprisingly recent major change in southern phocid diversity. [ABSTRACT FROM AUTHOR]

The relative body masses of predators and their prey strongly affect the predators' ecology. An accurate estimate of the mass of an extinct predator is therefore key to revealing its biology and the structure of the ecosystem it inhabited. Until its extinction, the thylacinewas the largest extant carnivorous marsupial, but little data exist regarding its body mass, with an average of 29.5 kg the most commonly used estimate. According to the costs of carnivory model, this estimate predicts that thylacines would have focused on prey subequal to or larger than themselves; however, many studies of their functional morphology suggest a diet of smaller animals. Here, we present new body mass estimates for 93 adult thylacines, including two taxidermy specimens and four complete mounted skeletons, representing 40 known-sex specimens, using three-dimensional volumetric model-informed regressions. We demonstrate that prior estimates substantially overestimated average adult thylacine body mass. We show mixed-sex population mean (16.7 kg), mean male (19.7 kg), and mean female (13.7 kg) body masses well below prior estimates, and below the 21 kg costs of carnivory threshold. Our data show that the thylacine did not violate the costs of carnivory. The thylacine instead occupied the 14.5-21 kg predator/prey range characterized by small-prey predators capable of occasionally switching to relatively large-bodied prey if necessary. [ABSTRACT FROM AUTHOR]

A correction notice for "First monk seal from the Southern Hemisphere rewrites the evolutionary history of true seals" is presented, which is published in the November 11, 2020 issue of the periodical.

The Palorchestidae are a family of marsupial megafauna occurring across the eastern Australian continent from the late Oligocene through to their extinction in the Late Pleistocene. The group is known for their odd ‘tapir-like’ crania and distinctive clawed forelimbs, but their appendicular anatomy has never been formally described. We provide the first descriptions of the appendicular skeleton and body mass estimates for three palorchestid species, presenting newly-identified, and in some cases associated, material of mid-Miocene Propalorchestes, Plio-Pleistocene Palorchestes parvus and Pleistocene Palorchestes azael alongside detailed comparisons with extant and fossil vombatiform marsupials. We propose postcranial diagnostic characters at the family, genus and species level. Specialisation in the palorchestid appendicular skeleton evidently occurred much later than in the cranium and instead correlates with increasing body size within the lineage. We conclude that palorchestid forelimbs were highly specialised for the manipulation of their environment in the acquisition of browse, and that they may have adopted bipedal postures to feed. Our results indicate palorchestids were bigger than previously thought, with the largest species likely weighing over 1000 kg. Additionally, we show that P. azael exhibits some of the most unusual forelimb morphology of any mammal, with a uniquely fixed humeroulnar joint unlike any of their marsupial kin, living or extinct. [ABSTRACT FROM AUTHOR]

The thylacine is popularly used as a classic example of convergent evolution between placental and marsupial mammals. Despite having a fossil history spanning over 20 million years and known since the 1960s, the thylacine is often presented in both scientific literature and popular culture as an evolutionary singleton unique in its morphological and ecological adaptations within the Australian ecosystem. Here, we synthesise and critically evaluate the current state of published knowledge regarding the known fossil record of Thylacinidae prior to the appearance of the modern species. We also present phylogenetic analyses and body mass estimates of the thylacinids to reveal trends in the evolution of hypercarnivory and ecological shifts within the family. We find support that Mutpuracinus archibaldi occupies an uncertain position outside of Thylacinidae, and consider Nimbacinus richi to likely be synonymous with N. dicksoni. The Thylacinidae were small-bodied (< ~8 kg) unspecialised faunivores until after the ~15-14 Ma middle Miocene climatic transition (MMCT). After the MMCT they dramatically increase in size and develop adaptations to a hypercarnivorous diet, potentially in response to the aridification of the Australian environment and the concomitant radiation of dasyurids. This fossil history of the thylacinids provides a foundation for understanding the ecology of the modern thylacine. It provides a framework for future studies of the evolution of hypercarnivory, cursoriality, morphological and ecological disparity, and convergence within mammalian carnivores. [ABSTRACT FROM AUTHOR]

Reconstructing the detailed dietary behaviour of extinct hominins is challenging1—particularly for a species such as Australopithecus africanus, which has a highly variable dental morphology that suggests a broad diet2,3. The dietary responses of extinct hominins to seasonal fluctuations in food availability are poorly understood, and nursing behaviours even less so; most of the direct information currently available has been obtained from high-resolution trace-element geochemical analysis of Homo sapiens (both modern and fossil), Homo neanderthalensis4 and living apes5. Here we apply high-resolution trace-element analysis to two A. africanus specimens from Sterkfontein Member 4 (South Africa), dated to 2.6–2.1 million years ago. Elemental signals indicate that A. africanus infants predominantly consumed breast milk for the first year after birth. A cyclical elemental pattern observed following the nursing sequence—comparable to the seasonal dietary signal that is seen in contemporary wild primates and other mammals—indicates irregular food availability. These results are supported by isotopic evidence for a geographical range that was dominated by nutritionally depauperate areas. Cyclical accumulation of lithium in A. africanus teeth also corroborates the idea that their range was characterized by fluctuating resources, and that they possessed physiological adaptations to this instability. This study provides insights into the dietary cycles and ecological behaviours of A. africanus in response to food availability, including the potential cyclical resurgence of milk intake during times of nutritional challenge (as observed in modern wild orangutans5). The geochemical findings for these teeth reinforce the unique place of A. africanus in the fossil record, and indicate dietary stress in specimens that date to shortly before the extinction of Australopithecus in South Africa about two million years ago. Trace-element analysis of teeth from the hominin Australopithecus africanus, dated to 2.6–2.1 million years ago, sheds light on the weaning sequence of this species and its responses to seasonal food scarcity [ABSTRACT FROM AUTHOR]

Bolt's Farm is a Plio-Pleistocene fossil site located within the southwestern corner of the UNESCO Hominid Fossil Sites of South Africa World Heritage Site. The site is a complex of active caves and more than 20 palaeokarst deposits or pits, many of which were exposed through the action of lime mining in the early 20th century. The pits represent heavily eroded cave systems, and as such associating the palaeocave sediments within and between the pits is difficult, especially as little geochronological data exists. These pits and the associated lime miner's rubble were first explored by palaeoanthropologists in the late 1930s, but as yet no hominin material has been recovered. The first systematic mapping was undertaken by Frank Peabody as part of the University of California Africa Expedition (UCAE) in 1947-1948. A redrawn version of the map was not published until 1991 by Basil Cooke and this has subsequently been used and modified by recent researchers. Renewed work in the 2000s used Cooke's map to try and relocate the original fossil deposits. However, Peabody's map does not include all the pits and caves, and thus in some cases this was successful, while in others previously sampled pits were inadvertently given new names. This was compounded by the fact that new fossil bearing deposits were discovered in this new phase, causing confusion in associating the 1940s fossils with the deposits from which they originated; as well as associating them with the recently excavated material. To address this, we have used a Geographic Information System (GIS) to compare Peabody's original map with subsequently published maps. This highlighted transcription errors between maps, most notably the location of Pit 23, an important palaeontological deposit given the recovery of well-preserved primate crania (Parapapio, Cercopithecoides) and partial skeletons of the extinct felid Dinofelis. We conducted the first drone and Differential Global Positioning System (DGPS) survey of Bolt's Farm. Using legacy data, highresolution aerial imagery, accurate DGPS survey and GIS, we relocate the original fossil deposits and propose a definitive and transparent naming strategy for Bolt's Farm, based on the original UCAE Pit numbers. We provide datum points and a new comprehensive, georectified map to facilitate spatially accurate fossil collection for all future work. Additionally, we have collated recently published faunal data with historic fossil data to evaluate the biochronological potential of the various deposits. This suggests that the palaeocave deposits in different pits formed at different times with the occurrence of Equus in some pits implying ages of <2.3 Ma, whereas more primitive suids (Metridiochoerus) hint at a terminal Pliocene age for other deposits. This study highlights that Bolt's Farm contains rare South African terminal Pliocene fossil deposits and creates a framework for future studies of the deposits and previously excavated material. [ABSTRACT FROM AUTHOR]

The practical aspect of human developmental biology education is often limited to the observation and use of animal models to illustrate developmental anatomy. This is due in part to the difficulty of accessing human embryonic and fetal specimens, and the sensitivity inherent to presenting these specimens as teaching materials. This report presents a new approach using three‐dimensional (3D) printed replicas of actual human materials in practical classes, thus allowing for the inclusion of accurate examples of human developmental anatomy in the educational context. A series of 3D prints have been produced from digital data collected by computed tomography (CT) imaging of an archived series of preserved human embryonic and fetal specimens. The final versions of 3D prints have been generated in a range of single or multiple materials to illustrate the progression of human development, including the development of internal anatomy. Furthermore, multiple copies of each replica have been printed for large group teaching. In addition to the educational benefit of examining accurate 3D replicas, this approach lessens the potential for adverse student reaction (due to cultural background or personal experience) to observing actual human embryonic/fetal anatomical specimens, and reduces the potential of damage or loss of original specimens. This approach, in combination with ongoing improvements in the management and analysis of digital data and advances in scanning technology, has enormous potential to allow embryology students access to both local and international collections of human gestational material. Anat Sci Educ 00: 000–000. © 2018 American Association of Anatomists. [ABSTRACT FROM AUTHOR]

Abstract: Objectives: Rapid prototyping (RP) technology is becoming more affordable, faster, and is now capable of building models with a high resolution and accuracy. Due to technological limitations, 3D printing in biological anthropology has been mostly limited to museum displays and forensic reconstructions. In this study, we compared the accuracy of different 3D printers to establish whether RP can be used effectively to reproduce anthropological dental collections, potentially replacing access to oftentimes fragile and irreplaceable original material. Methods: We digitized specimens from the Yuendumu collection of Australian Aboriginal dental casts using a high‐resolution white‐light scanning system and reproduced them using four different 3D printing technologies: stereolithography (SLA); fused deposition modeling (FDM); binder‐jetting; and material‐jetting. We compared the deviations between the original 3D surface models with 3D print scans using color maps generated from a 3D metric deviation analysis. Results: The 3D printed models reproduced both the detail and discrete morphology of the scanned dental casts. The results of the metric deviation analysis demonstrate that all 3D print models were accurate, with only a few small areas of high deviations. The material‐jetting and SLA printers were found to perform better than the other two printing machines. Conclusions: The quality of current commercial 3D printers has reached a good level of accuracy and detail reproduction. However, the costs and printing times limit its application to produce large sample numbers for use in most anthropological studies. Nonetheless, RP offers a viable option to preserve numerically constraint fragile skeletal and dental material in paleoanthropological collections. [ABSTRACT FROM AUTHOR]

The Gondolin palaeokarstic system, located in the UNESCO Fossil Hominids of South Africa World Heritage Site, has been sporadically excavated since the 1970s. Sampling of ex situ dumpsites in 1997 recovered the only two fossil hominin specimens recovered thus far from Gondolin. While one partial mandibular molar (GA 1) remains unattributed, the complete mandibular second molar (GA 2) represents the largest Paranthropus robustus Broom, 1938 tooth identified to date. While subsequent excavations and research at Gondolin has clarified the geological, temporal, taphonomic, and palaeoecologic context for the in situ deposits, this paper presents the first comprehensive description of the fossil assemblage 'associated' with the two ex situ hominins. Analysis of 42 calcified sediment blocks and naturally decalcified sediments excavated from three cubic metres of the Dump A deposits reinforce that the dump contains a heterogeneous aggregation of materials from across the Gondolin sedimentary deposits. A total of 15,250 individual fossil specimens were processed (via sifting or acetic-acid mediated processing of calcified sediment blocks), yielding a faunal record that largely mirrors that described from either (or both) the GD 1 and GD 2 in situ assemblages but includes representatives of four novel mammal groups (Families Cercopithecidae, Felidae, Herpestidae, Giraffidae) not recorded in either in situ sample. While basic assemblage characteristics including primary taphonomic data is presented, analysis and interpretation is limited by the ex situ origin of the sample. Ultimately, these results reinforce that the substantial mining-mediated obliteration of palaeokarstic deposits at Gondolin continue to obscure a clear association between the Gondolin Dump A hominins and any of the sampled and dated in situ deposits. [ABSTRACT FROM AUTHOR]

Convergence is the tendency of independent species to evolve similarly when subjected to the same environmental conditions. The primitive blueprint for the circulatory system emerged around 700-600 Mya and exhibits diverse physiological adaptations across the radiations of vertebrates (Subphylum Vertebrata, Phylum Chordata). It has evolved from the early chordate circulatory system with a single layered tube in the tunicate (Subphylum Urchordata) or an amphioxus (Subphylum Cephalochordata), to a vertebrate circulatory system with a two-chambered heart made up of one atrium and one ventricle in gnathostome fish (Infraphylum Gnathostomata), to a system with a three-chambered heart made up of two atria which maybe partially divided or completely separated in amphibian tetrapods (Class Amphibia). Subsequent tetrapods, including crocodiles and alligators (Order Crocodylia, Subclass Crocodylomorpha, Class Reptilia), birds (Subclass Aves, Class Reptilia) and mammals (Class Mammalia) evolved a four-chambered heart. The structure and function of the circulatory system of each individual holds a vital role which benefits each species specifically. The special characteristics of the four-chamber mammalian heart are highlighted by the peculiar structure of the myocardial muscle. [ABSTRACT FROM AUTHOR]

Studies have suggested that the proportions of the rostrum and mandible (from short and broad to elongate and narrow) in toothed whales (odontocetes) may be associated with the size of the prey they consume, yet quantitative data on relationships between skull shape and diet have been lacking. Here, we quantified variation in skull shape in extant toothed whales using 3D geometric morphometric analysis. We then used Phylogenetic Generalized Least Squares (PGLS) regression to examine the relationships between skull shape and quantitative data on minimum, average and maximum prey size. When examining all odontocetes, there were only weak correlations between skull shape and prey size. However, when suction feeding taxa were excluded, prey size was correlated with the size of the predator (predator size vs. max prey size: R² = 0.45) as well as the shape of the cranium (cranial robustness vs. minimum prey size: R² = 0.19) and mandible (mandible robustness vs. minimum prey size: R² = 0.27). Considering the prey capture method (suction feeding vs. raptorial feeding) is therefore important for elucidating relationships that exist between form and function. These findings suggest that cranial morphology is intimately linked to prey size niche in toothed whales within specific functional contexts. [ABSTRACT FROM AUTHOR]

The striking resemblance of long-snouted aquatic mammals and reptiles has long been considered an example of morphological convergence, yet the true cause of this similarity remains untested. We addressed this deficit through three-dimensional morphometric analysis of the full diversity of crocodilian and toothed whale (Odontoceti) skull shapes. Our focus on biomechanically important aspects of shape allowed us to overcome difficulties involved in comparing mammals and reptiles, which have fundamental differences in the number and position of skull bones. We examined whether diet, habitat and prey size correlated with skull shape using phylogenetically informed statistical procedures. Crocodilians and toothed whales have a similar range of skull shapes, varying from extremely short and broad to extremely elongate. This spectrum of shapes represented more of the total variation in our dataset than between phylogenetic groups. The most elongate species (river dolphins and gharials) are extremely convergent in skull shape, clustering outside of the range of the other taxa. Our results suggest the remarkable convergence between long-snouted river dolphins and gharials is driven by diet rather than physical factors intrinsic to riverine environments. Despite diverging approximately 288 million years ago, crocodilians and odontocetes have evolved a remarkably similar morphological solution to feeding on similar prey. [ABSTRACT FROM AUTHOR]

Three-dimensional (3D) printing is an emerging technology capable of readily producing accurate anatomical models, however, evidence for the use of 3D prints in medical education remains limited. A study was performed to assess their effectiveness against cadaveric materials for learning external cardiac anatomy. A double blind randomized controlled trial was undertaken on undergraduate medical students without prior formal cardiac anatomy teaching. Following a pre-test examining baseline external cardiac anatomy knowledge, participants were randomly assigned to three groups who underwent self-directed learning sessions using either cadaveric materials, 3D prints, or a combination of cadaveric materials/3D prints (combined materials). Participants were then subjected to a post-test written by a third party. Fifty-two participants completed the trial; 18 using cadaveric materials, 16 using 3D models, and 18 using combined materials. Age and time since completion of high school were equally distributed between groups. Pre-test scores were not significantly different ( P = 0.231), however, post-test scores were significantly higher for 3D prints group compared to the cadaveric materials or combined materials groups (mean of 60.83% vs. 44.81% and 44.62%, P = 0.010, adjusted P = 0.012). A significant improvement in test scores was detected for the 3D prints group ( P = 0.003) but not for the other two groups. The finding of this pilot study suggests that use of 3D prints do not disadvantage students relative to cadaveric materials; maximally, results suggest that 3D may confer certain benefits to anatomy learning and supports their use and ongoing evaluation as supplements to cadaver-based curriculums. Anat Sci Educ 9: 213-221. © 2015 American Association of Anatomists. [ABSTRACT FROM AUTHOR]

Nearly a century of paleontological excavation and analysis from the cave deposits of the Cradle of Humankind UNESCO World Heritage Site in northeastern South Africa underlies much of our understanding of the evolutionary history of hominins, other primates and other mammal lineages in the late Pliocene and early Pleistocene of Africa. As one of few designated fossil repositories, the Plio-Pleistocene Palaeontology Section of the Ditsong National Museum of Natural History (DNMNH; the former Transvaal Museum) curates much of the mammalian faunas recovered from the fossil-rich deposits of major South African hominin-bearing localities, including the holotype and paratype specimens of many primate, carnivore, and other mammal species (Orders Primates, Carnivora, Artiodactyla, Eulipotyphla, Hyracoidea, Lagomorpha, Perissodactyla, and Proboscidea). Here we describe an open-access digital archive of high-resolution, full-color three-dimensional (3D) surface meshes of all 89 non-hominin holotype, paratype and significant mammalian specimens curated in the Plio-Pleistocene Section vault. Surface meshes were generated using a commercial surface scanner (Artec Spider, Artec Group, Luxembourg), are provided in formats that can be opened in both open-source and commercial software, and can be readily downloaded either via an online data repository (MorphoSource) or via direct request from the DNMNH. In addition to providing surface meshes for each specimen, we also provide tomographic data (both computerized tomography [CT] and microfocus [microCT]) for a subset of these fossil specimens. This archive of the DNMNH Plio-Pleistocene collections represents the first research-quality 3D datasets of African mammal fossils to be made openly available. This simultaneously provides the paleontological community with essential baseline information (e.g., updated listing and 3D record of specimens in their current state of preservation) and serves as a single resource of high-resolution digital data that improves collections accessibility, reduces unnecessary duplication of efforts by researchers, and encourages ongoing imaging-based paleobiological research across a range of South African non-hominin fossil faunas. Because the types, paratypes, and key specimens include globally-distributed mammal taxa, this digital archive not only provides 3D morphological data on taxa fundamental to Neogene and Quaternary South African palaeontology, but also lineages critical to research on African, other Old World, and New World paleocommunities. With such a broader impact of the DNMNH 3D data, we hope that establishing open access to this digital archive will encourage other researchers and institutions to provide similar resources that increase accessibility to paleontological collections and support advanced paleobiological analyses. [ABSTRACT FROM AUTHOR]

Background The teaching of human head, neck and orbital anatomy forms a critical part of undergraduate and postgraduate medical and allied health professional training, including optometry. While still largely grounded in cadaveric dissection, this method of instruction is constrained in some countries and regional areas by access to real human cadavers, costs of cadaver bequest programmes, health and safety of students and staff and the shortage of adequate time in modern curricula. Many candidates choosing a postgraduate pathway in ophthalmological training, such as those accepted into the Royal Colleges of Ophthalmology in the UK, Australia and New Zealand programmes and the American Academy of Ophthalmologists in the USA, are compelled as adult learners to revise or revisit human orbital anatomy, ocular anatomy and select areas of head and neck anatomy. These candidates are often then faced with the issue of accessing facilities with dissected human cadaveric material. Methods In light of these difficulties, we developed a novel means of creating high-resolution reproductions of prosected human cadaver orbits suitable for education and training. Results 3D printed copies of cadaveric orbital dissections (superior, lateral and medial views) showing a range of anatomical features were created. Discussion These 3D prints offer many advantages over plastinated specimens as they are suitable for rapid reproduction and as they are not human tissue they avoid cultural and ethical issues associated with viewing cadaver specimens. In addition, they are suitable for use in the office, home, laboratory or clinical setting in any part of the world for patient and doctor education. [ABSTRACT FROM AUTHOR]

The teaching of anatomy has consistently been the subject of societal controversy, especially in the context of employing cadaveric materials in professional medical and allied health professional training. The reduction in dissection-based teaching in medical and allied health professional training programs has been in part due to the financial considerations involved in maintaining bequest programs, accessing human cadavers and concerns with health and safety considerations for students and staff exposed to formalin-containing embalming fluids. This report details how additive manufacturing or three-dimensional (3D) printing allows the creation of reproductions of prosected human cadaver and other anatomical specimens that obviates many of the above issues. These 3D prints are high resolution, accurate color reproductions of prosections based on data acquired by surface scanning or CT imaging. The application of 3D printing to produce models of negative spaces, contrast CT radiographic data using segmentation software is illustrated. The accuracy of printed specimens is compared with original specimens. This alternative approach to producing anatomically accurate reproductions offers many advantages over plastination as it allows rapid production of multiple copies of any dissected specimen, at any size scale and should be suitable for any teaching facility in any country, thereby avoiding some of the cultural and ethical issues associated with cadaver specimens either in an embalmed or plastinated form. Anat Sci Educ 7: 479-486. © 2014 American Association of Anatomists. [ABSTRACT FROM AUTHOR]

A letter to the editor is presented in response to the article "Shallow-Water Habitats as Sources of Fallback Foods for Hominins," by R. Wrangham, D. Cheney, R. Seyfarth and E. Sarmiento.

The current study considers the osteological morphology of the giraffe ( Giraffa camelopardalis) vertebral column, with emphasis on evaluating both the adaptive and constraining features compared with other ungulates as a heuristic example in understanding evolutionary processes. Vertebral columns of giraffes varying in age from calf to adult were studied in order to understand the potential evolutionary scenarios that might have led to the modern phenotype. Data from the giraffe sample were then compared with the results from several other ungulate species, including the okapi and two species of camelids that also have visibly elongated necks. Our results show that the elongated neck of the modern giraffe appears to specifically result from evolutionary changes affecting the seven cervical vertebrae, independent of the remainder of the vertebral column. The cervical vertebrae comprise over half of the length of the total vertebral column in the giraffe. The increases in cervical vertebrae lengths also appear to be allometrically constrained, with alterations in the overall length of the neck resulting from the elongation of the entire cervical series, rather than from a single vertebra or subset of vertebrae. We place our results in the context of hypotheses concerning the origin and evolution of the giraffe neck, and the evolution of long necks in a broader sense. © 2009 The Linnean Society of London, Zoological Journal of the Linnean Society, 2009, 155, 736–757. [ABSTRACT FROM AUTHOR]

The article discusses the Emeritus Professor R. H. Anderson confutes the existence of the so-called helical ventricular myocardial band. It states that the model of heart anatomy based on the helical ventricular myocardial band (HMVB) which has been validated in several aspects of heart pathophysiology and is involved in clinical procedures in cardiology and heart surgery like heart failure.

Background: Neurosurgical residents are finding it more difficult to obtain experience as the primary operator in aneurysm surgery. The present study aimed to replicate patient-derived cranial anatomy, pathology and human tissue properties relevant to cerebral aneurysm intervention through 3D printing and 3D print-driven casting techniques. The final simulator was designed to provide accurate simulation of a human head with a middle cerebral artery (MCA) aneurysm. Methods: This study utilized living human and cadaver-derived medical imaging data including CT angiography and MRI scans. Computer-aided design (CAD) models and pre-existing computational 3D models were also incorporated in the development of the simulator. The design was based on including anatomical components vital to the surgery of MCA aneurysms while focusing on reproducibility, adaptability and functionality of the simulator. Various methods of 3D printing were utilized for the direct development of anatomical replicas and moulds for casting components that optimized the bio-mimicry and mechanical properties of human tissues. Synthetic materials including various types of silicone and ballistics gelatin were cast in these moulds. A novel technique utilizing water-soluble wax and silicone was used to establish hollow patient-derived cerebrovascular models. Results: A patient-derived 3D aneurysm model was constructed for a MCA aneurysm. Multiple cerebral aneurysm models, patient-derived and CAD, were replicated as hollow high-fidelity models. The final assembled simulator integrated six anatomical components relevant to the treatment of cerebral aneurysms of the Circle of Willis in the left cerebral hemisphere. These included models of the cerebral vasculature, cranial nerves, brain, meninges, skull and skin. The cerebral circulation was modeled through the patient-derived vasculature within the brain model. Linear and volumetric measurements of specific physical modular components were repeated, averaged and compared to the original 3D meshes generated from the medical imaging data. Calculation of the concordance correlation coefficient (ρc: 90.2%–99.0%) and percentage difference (≤0.4%) confirmed the accuracy of the models. Conclusions: A multi-disciplinary approach involving 3D printing and casting techniques was used to successfully construct a multi-component cerebral aneurysm surgery simulator. Further study is planned to demonstrate the educational value of the proposed simulator for neurosurgery residents. [ABSTRACT FROM AUTHOR]

It was recently shown that adult male koalas (Phascolarctos cinereus) possess a novel vocal organ, the velar vocal folds, that underlie their mating bellows. Here we demonstrate through dissection of the infrahyoid region that this novel structure is also present in female and immature male koalas. [ABSTRACT FROM AUTHOR]