Search

Stiffened slabs-on-grade are one of the most efficient and inexpensive foundation solutions for lightweight structures on shrinkswell soils. The Ellison Office Building (EOB) is a 1-story steel-framed building founded on a clay formation of high shrink-swell potential. The foundation system of the EOB is composed of a rectangular stiffened slab-on-grade with approximate dimensions of 18.3 by 38.1 m. The slab thickness is 0.1 m, and the depth of all stiffening beams is 1.05 m. Beam spacing distances, center to center, are 3.05 and 3.81 m in the short and long directions, respectively. Exploration of subsurface soil conditions at the EOB site took place to determine soil index properties as well as unsaturated moisture diffusion and volume change characteristics for unsaturated soils. Monitoring the movements of both the slab-on-grade and the 4.5 m soil underneath continued for 2 years after foundation construction, since September 2004. Investigating the EOB foundation performance in light of the soil-structure interaction characteristics of the foundation showed two main distinct slab movement patterns: continuous global heave and localized fluctuating slab edge heave and drop movements. [ABSTRACT FROM AUTHOR]

Stiffened slabs-on-grade are one of the most economical solutions for 1- to 3-story buildings on shrink-swell soils. They consist, for example, of 1-m-deep, 0.3-m-wide beams resting on the soil, spaced 4 m apart in both directions covered by a 0.1-m-thick slab-on-grade. The challenge is to optimize the beamdepth, width, and spacing for the slab to be stiff enough that themovement of the soil at the edges of the slab will not cause undue bending of the foundation and the structure above it. Indeed, shrink-swell soils are affected by the weather and/or by the irrigation at the edges of the foundation and will swell and shrink as a result. This article presents a new method to design stiffened slabs on grade such that the differential movement divided by the length over which this movement takes place is within tolerable limits. The method gives the beam depth necessary to achieve such stiffness as well as the bending moment and shear force to be resisted. The method is automated in a spreadsheet called TAMU-SLAB. [ABSTRACT FROM AUTHOR]