Search

Some ancient Chinese paper artifacts dyed with amur cork tree bark extracts are currently preserved to different extents in museums and libraries worldwide. As traditional natural plant dyes, the long-term performance of the amur cork tree bark extract-dyed handmade paper has been questioned under a preserved environment. The photodegradation process of the extract-dyed papers was examined under accelerating artificial UVA irradiation conditions according to China national standard-paper and board- accelerated aging (exposure to light). Changes during aging were analyzed by optical observation and scanning electron microscopy (SEM), X-ray diffraction (XRD), thermogravimetric analysis (TGA), Fourier transform infrared spectrometry (FTIR), pH, and tensile strength and folding endurance tests. The results showed that the main components from extracted dyes played an important role in affecting the photodegradation properties of dyed paper. The changes in surface color, pH, morphology and mechanical properties after the artificial UVA accelerated degradation tests revealed that a suitable concentration of the extract dyes for maintaining the long-term irradiation stability of the paper is important. [ABSTRACT FROM AUTHOR]

The relationship between environmental regulation and firm productivity has been widely debated but inconsistencies in findings across different studies. Using detailed firm-level micro-data from 2000 to 2007, this paper employs difference-in-difference combined with matching based on entropy balancing method to explore the effect of environmental regulation on firm total factor productivity (TFP) in pulp and paper industry in China. Our main findings are as following: Firstly, stricter environmental regulation, as represented by the Wastewater Discharge Standards for Pulp and Paper Industry in Shandong province, increases firm TFP significantly. Moreover, the coefficients of interest are robust to multiple robustness checks. Secondly, dynamic effects estimates reveal that when faced with this phase-in environmental regulation, firms take the foreseeably increasing strictness into account from the very beginning and prefer to take one-step adjustment to reach full compliance. Thirdly, potential mechanism analysis finds that the positive effect mainly comes from the improvement of resource allocation efficiency within firms. Fourthly, the heterogeneity test indicates that the effect of environmental regulation on firm TFP is heterogeneous across firms with different sizes, ages, ownerships, capital intensity, and export status. Finally, this paper provides convincing and insightful evidence that environmental regulation has the potential to achieve the dual goals of environmental sustainability and economic growth and is thus of broader significance for understanding the enforcement of environmental regulation in developing countries. [ABSTRACT FROM AUTHOR]

Congestion is a well-known economic phenomenon in which excessive inputs lead to a decrease in the maximum possible outputs. This study analyzes the relationship between congestion and overinvestment using a data envelopment analysis framework to reveal that some congestion can be eliminated by increasing inputs. The proposed approach classifies congestion into two categories, relative and absolute congestion, depending on the possibility of eliminating congestion by increasing inputs. Corresponding methods for identifying and measuring congestion are proposed and employed for empirical analyses examining China's papermaking and paper products industry. We find that most congestion in 2013–2016 is in the relative congestion and could be eliminated by increasing inputs. The primary causes of congestion are identified based on our analysis and corresponding policy suggestions are proposed for eliminating congestion. [ABSTRACT FROM AUTHOR]

Kaihua paper is a type of precious hand-made paper in China that has been used throughout Chinese history. Due to its extraordinary whiteness and fine texture, it was adopted by the imperial palace in the reign of Emperor Kang Xi and Yong Zheng of the Qing Dynasty of China in the 17th and 18th century. It is stained by a special type of yellowish-brown spot after years of storage, which is called a "peachy spot." The formation of such spots remains unclear, although complicated physicochemical processes or microbial activities might be involved. We performed nondestructive sampling and high-throughput sequencing on peachy spot surfaces, unstained areas, and air samples in the stack room to analysis the the bacterial and fungal communities, and performed prediction of functional genes of the bacterial communities. The results showed that peachy spot formation was mainly related to bacterial communities rather than fungal communities. Significantly more potential acid-producing, acidophilic or cellulase-producing bacteria, such as, Streptococcus, Staphylococcus, and Lysinibacillus, and pigment-producing bacteria, such as Methylobacterium and Rubrobacter, were identified in the peachy spot samples. Prediction of the functional genes of the bacterial community also suggested the production of acidic substance pigments. These findings provide new insights into the pigment formation mechanism in ancient paper and open an opportunity to develop new strategies to preserve the ancient paper documents. [ABSTRACT FROM AUTHOR]

Paper mulberry is a high-quality woody feed resource plant with high crude protein content. It is widely distributed in China and has excellent characteristics of salt and alkali tolerance. Paper mulberry has ecological and economic importance. Salt stress has become a critical factor with the increasing degree of soil salinity that restricts plant growth. In the saline-alkali environments, transcriptome expression is altered leading to phenotypic defects in most plants. However, the regulatory mechanism related to paper mulberry's salt-stress (SS) response is not clearly understood. In the present study de novo transcriptomic assembly was performed, and gene expression levels were measured between different SS and natural conditions (25°C) as a control for paper mulberry plants. According to the results of our study, under NaCl stress conditions, the differential gene expression was observed in the leaves of paper mulberry compared with the control. A total of 2126 differentially expressed unigenes were observed. Among these unigenes the expression of 812 DEGs was up-regulated and the expression of 1,314 DEGs was down-regulated. Additionally, The GO and KEGG analyses regarding differentially expressed unigenes (DEUs) revealed that the observed critical transcriptomic alterations under salt stress (SS) conditions were associated with primary and secondary metabolism, photosynthesis, and plant hormone signaling pathways. Further investigations such as gene function studies regarding the unigenes depicting altered expression under salt stress conditions in paper mulberry will help understand the mechanism of salt tolerance, and this information can be utilized in paper mulberry breeding and improvement programs. [ABSTRACT FROM AUTHOR]

Copyright of Chinese Journal of Tissue Engineering Research / Zhongguo Zuzhi Gongcheng Yanjiu is the property of Chinese Journal of Tissue Engineering Research and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The purpose of this research is to study the changes in the market structure of China's pulp and paper product imports. In particular, the import trade environment and market layout of Chinese pulp and paper products have changed under the international context of the coronavirus pandemic and the Sino-US trade dispute and the domestic policy context of zero imports of Chinese waste paper. This study attempts to fill the gap regarding the influencing factors of market structure, while contributing new ideas on China's trade in pulp and paper products. Based on pulp and paper product import and export trade data from 2005 to 2021, a trade gravity model was used to explore the changes in the share of China's trade partners for pulp and paper product imports and their influencing factors. The results indicated that the outbreak of COVID-19 led to a significant increase in China's imports of packaging paper products, bringing about an increase in Indonesia's status as a partner in China's pulp and paper product trade. The US-China trade dispute had an impact on pulp and paper product trade between the two countries, with China's tax countermeasures causing the US to lose its status as a trading partner in China for pulp and paper product imports. The center of gravity for paper product imports has moved from the US and Japan to Indonesia and Russia. The restrictions on waste paper imports have shifted the focus of China's paper raw material imports, with the US no longer being the main importer of China's paper raw materials. Specifically, the main importers of wood pulp are Brazil and Chile, while the main importers of waste paper pulp are Thailand and Malaysia. In the future, China needs to continuously strengthen dialogue with the United States to resolve trade disputes and create a favorable environment for trade in pulp and paper products. At the same time, China's paper enterprises should strengthen the expansion of the Southeast Asian market and reduce dependence on the US market, and China should continue to improve the waste paper recycling system and improve the utilization rate of domestic waste paper. [ABSTRACT FROM AUTHOR]

Copyright of China Pulp & Paper is the property of China Pulp & Paper Magazines Publisher and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The number of retracted papers from Chinese university-affiliated hospitals is increasing, which has raised much concern. The aim of this study is to analyze the retracted papers from university-affiliated hospitals in mainland China from 2000 to 2021. Data for 1,031 retracted papers were identified from the Web of Science Core collection database. The information of the hospitals involved was obtained from their official websites. We analyzed the chronological changes, journal distribution, discipline distribution and retraction reasons for the retracted papers. The grade and geographic locations of the hospitals involved were explored as well. We found a rapid increase in the number of retracted papers, while the retraction time interval is decreasing. The main reasons for retraction are plagiarism/self-plagiarism (n=255), invalid data/images/conclusions (n=212), fake peer review (n=175) and honesty error(n=163). The disciplines are mainly distributed in oncology (n=320), pharmacology & pharmacy (n=198) and research & experimental medicine (n=166). About 43.8% of the retracted papers were from hospitals affiliated with prestigious universities. This study fails to differentiate between retractions due to honest error and retractions due to research misconduct. We believe that there is a fundamental difference between honest error retractions and misconduct retractions. Another limitation is that authors of the retracted papers have not been analyzed in this study. This study provides a reference for addressing research misconduct in Chinese university-affiliated hospitals. It is our recommendation that universities and hospitals should educate all their staff about the basic norms of research integrity, punish authors of scientific misconduct retracted papers, and reform the unreasonable evaluation system. Based on the analysis of retracted papers, this study further analyzes the characteristics of institutions of retracted papers, which may deepen the research on retracted papers and provide a new perspective to understand the retraction phenomenon. [ABSTRACT FROM AUTHOR]

Publications in Renal Failure in Science Citation Index Expanded (SCI-EXPANDED) between 1992 and 2021 were analyzed. Six publication indicators: total, independent, collaborative, first author, corresponding author, and single author publications as well as their related citation indicators, were used to compare performances of countries, institutes, and authors. Comparison of the highly cited papers and journal's impact factor (IF) contributors was discussed. In addition, the main research topics in the journal were presented. Results show that China published the most total articles and reviews, as well as the first-author papers and corresponding-author papers in the journal. The Chang Gung Memorial Hospital in Taiwan ranked the top in five publication indicators: total, single-institution, inter-institutionally collaborative, first author, and corresponding-author papers. A low percentage of productive authors emerged as a journal IF contributor. Similarly, only a limited relationship between highly cited papers and IF contributing papers was found. Publications related to hemodialysis, chronic kidney disease, and acute kidney injury were the most popular topic, while meta-analysis was new focus in the last decade in the journal. [ABSTRACT FROM AUTHOR]

Copyright of China Pulp & Paper is the property of China Pulp & Paper Magazines Publisher and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of China Pulp & Paper is the property of China Pulp & Paper Magazines Publisher and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

In the late Qing Dynasty, religious periodicals by Western missionaries were made legal in China, and subsequently became an important manner of their missionary cause. Among them, Child's Paper 小孩月报 (1875–1881) by John Marshall Willoughby Farnham, a Protestant missionary from the United States, endeavoured to convert child readers by carrying children's stories of moral and emotional education. By concentrating on the educational elements of Child's Paper, this article inspects how conversion was achieved via the intertextual interpretation of Christian doctrines within these educational elements. Specifically, how the image of little Christians and urchins, respectively, represents salvation and redemption in Christian morals. This article holds that the missionaries' stress on the authority of Christian discourse in the education of Chinese children makes evident an increasing emphasis on the reformative effects of Christianity on Chinese children. Moreover, the conversion-education efforts by missionaries also construed helping Chinese children gain a cross-cultural perspective on Western religion, and arguably inspired later Chinese intellectuals' to create newspapers for the purpose of the pre-primary education of Chinese children. [ABSTRACT FROM AUTHOR]

Copyright of China Pulp & Paper is the property of China Pulp & Paper Magazines Publisher and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Cancer research is occasionally described as being in a reproducibility crisis. The cancer literature has ample papers retracted due to misconduct, including the use of paper mills, invalid authorship, or fake data. The objective of this paper was to gain an appreciation of the balance of retractions and associated retraction notices of 23 retracted Cancer Biotherapy and Radiopharmaceuticals papers associated with paper mills. By 23 March 2023, these retracted papers had already accumulated 287 citations according to Web of Science Core Collection, 253 according to Scopus, and 365 according to Google Scholar, i.e., metrically speaking, they were highly rewarded. All authors had an affiliation (71% being a hospital) in China. Most (12/21; 57%) of corresponding authors had emails with a @163.com suffix. Four of the retraction notices (i.e., 17%) explicitly indicated paper mills as a reason for retraction although, in general, the retraction notices lacked details and background that could assist readers' understanding of the retractions. [ABSTRACT FROM AUTHOR]

Copyright of China Pulp & Paper is the property of China Pulp & Paper Magazines Publisher and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Machine learning (ML) has become increasingly popular in the prediction of debris flow occurrence, but the various ML models utilized as baseline predictors reported in previous studies are typically limited to individual case bases. A comprehensive and systematic evaluation of existing empirical evidence on the utilization of ML as baseline predictors for debris flow occurrence is lacking. To address this gap, we conducted a meta-analysis of ML-based prediction modeling of debris flow occurrence by retrieving papers that were published between 2000 and 2023 from the Scopus and Web of Science databases. The general findings were as follows: (1) A total of 84 papers, distributed across 37 different journals in this time period, reflecting an overall upward trend. (2) Debris flow disasters occur throughout the world, and a total of 13 countries carried out research on the prediction of debris flow occurrence based on ML; China made significant contributions, but more research efforts in African countries should be considered. (3) A total of 36 categories of ML models were utilized as baseline predictors for debris flow occurrence, with logistic regression (LR) and random forest (RF) emerging as the most popular choices. (4) Feature engineering and model comparison were the most commonly utilized strategies in predicting debris flow occurrence based on ML (53 and 46 papers, respectively). (5) Interpretation methods were rarely utilized in predicting debris flow occurrence based on ML, with only 16 papers reporting their utilization. (6) In the prediction of debris flow occurrence based on ML, interpretation methods were rarely utilized, searching by data materials was the most important sample data source, the topographic factors were the most commonly utilized category of candidate variables, and the area under the ROC curve (AUROC) was the most frequently reported evaluation metric. (7) LR's prediction performance for debris flow occurrence was inferior to that of RF, BPNN, and SVM; SVM was comparable to RF, and all superior to BPNN. (8) The application process for the prediction of debris flow occurrence based on ML consisted of three main steps: data preparation, model construction and evaluation, and prediction outcomes. The research gaps in predicting debris flow occurrence based on ML include utilizing new ML techniques and enhancing the interpretability of ML. Consequently, this study contributes both to academic ML research and to practical applications in the prediction of debris flow occurrence. [ABSTRACT FROM AUTHOR]

Xuan paper is one of the most famous handmade papers in China and is an important paper for conservation. However, the evenness of Xuan paper has not yet received much attention. In this study, the distribution of the in-plane grammage and mechanical properties of Xuan paper are measured. It is found that the distribution of the in-plane grammage and mechanical properties of Xuan paper is uneven. In the handmade direction, the grammage and mechanical properties of Xuan paper are overall largest in the lower area, followed by the upper and middle areas. The sheet forming process of Xuan paper has an important effect on the distribution of in-plane grammage, mechanical properties, and fiber orientation of Xuan paper. The folded state has a negative effect on the mechanical properties of the folded area of Xuan paper. This study will help raise awareness of the unevenness in physical properties of Xuan paper, which is important in both conservation and research applications. [ABSTRACT FROM AUTHOR]

China's pulp and paper industry (CPPI) has been always the main carbon emission source in recent years. However, the analysis on influencing factors of carbon emissions from this industry is insufficient. To address the issue, the CO2 emissions from CPPI are estimated in the period of 2005–2019, the driving factors of CO2 emissions are investigated by the logarithmic mean Divisia index (LMDI) method, the decoupling state of economic growth and CO2 emissions is determined by Tapio decoupling model, and finally, future CO2 emissions are predicted under four scenarios by the STIRPAT model to explore the potential of carbon peaking. The results show that CPPI exhibits a rapid increase and a fluctuating downward trend in CO2 emissions during the period of 2005–2013 and 2014–2019, respectively. The main promoting and inhibiting factors to the increase of CO2 emission are per capita industrial output value and energy intensity, respectively. There are five decoupling states of CO2 emissions and economic growth during the study period, and the CO2 emissions exhibit a weak decoupling state with the industrial output value growth in most years of the study period. It is very difficult to realize the carbon peaking goal by 2030 under the baseline and fast development scenarios. Therefore, efficient low carbon and strong low-carbon development policies are necessary and urgent for the realization of carbon peaking goal and the sustainable development of CPPI. [ABSTRACT FROM AUTHOR]