Search

The Radar Cross Section (RCS) plays a crucial role in radar systems, serving to detect and characterize radar targets. Moreover, the need to penetrate foliage and capture images of man-made structures like roads and buildings has driven the development of very high frequency/ultra high frequency (VHF/UHF)-based radar systems. In this context, we propose a novel polyphase-coded spread spectrum (PCSS) radar system designed for RCS measurements and ISAR imaging over VHF/UHF radio channels in open environments. To provide a comprehensive understanding, we examined the open range, considering factors such as amplitude distribution function, root mean square (RMS) delay, and coherence bandwidth, followed by a link budget analysis. We also conducted a comparative study of RCS measurements to evaluate the performance of the proposed radar system, demonstrating its effectiveness through theoretical calculations. Furthermore, we assessed the radar imaging capabilities by applying the CLEAN algorithm to improve the quality of the generated images. [ABSTRACT FROM AUTHOR]

The Biomass Proxy is a new cloud-free vegetation monitoring product that offers timely and analysis-ready data indicative of above-ground crop biomass dynamics at 10m spatial resolution. The Biomass Proxy links the consistent and continuous temporal signal of the Sentinel-1 Cross Ratio (CR), a vegetation index derived from Synthetic Aperture Radar backscatter, with the spatial information of the Sentinel-2 Normalized Difference Vegetation Index (NDVI), a vegetation index derived from optical observations. A global scaling relationship between CR and NDVI forms the basis of a novel fusion methodology based on static and dynamic combinations of temporal and spatial responses of CR and NDVI at field level. The fusion process is used to mitigate the impact on product quality of low satellite revisit periods due to acquisition design or persistent cloud coverage, and to respond to rapid changes in a timely manner to detect environmental and management events. The resulting Biomass Proxy provides time series that are continuous, unhindered by clouds, and produced uniformly across all geographical regions and crops. The Biomass Proxy offers opportunities including improved crop growth monitoring, event detection, and phenology stage detection. [ABSTRACT FROM AUTHOR]

This article is a guest editorial for the IET Radar, Sonar & Navigation journal, focusing on selected papers from the RADAR 2022 conference held in Edinburgh, UK. The conference provided an opportunity for radar specialists from 22 countries to explore the latest developments in radar systems. Key topics discussed at the conference included new radar trends, target detection (with a focus on drones), low-frequency radar, and cognitive radar. The special issue contains 17 papers based on extended work presented at the conference, covering topics such as multistatic radar, passive radar, target signatures, and advanced radar processing techniques. The authors hope that this special issue will serve as a valuable resource for further research in the field. [Extracted from the article]

With the advent of constellations of SAR satellites, and the possibility of swarms of SAR UAV's, there is increased interest in multistatic SAR image formation. This may provide advantages including allowing three‐dimensional image formation free of clutter overlay; the coherent combination of bistatic SAR geometries for improved image resolution; and the collection of additional scattering information, including polarimetric. The polarimetric collection may provide useful target information, such as its orientation, polarisability, or number of interactions with the radar signal; distributed receivers would be more likely to capture any bright specular responses from targets in the scene, making target outlines distinct. Highlight results from multistatic polarimetric SAR experiments at the Cranfield University GBSAR laboratory are presented, illustrating the utility of the approach for fully sampled 3D SAR image formation, and for sparse aperture SAR 3D point‐cloud generation with a newly developed volumetric multistatic interferometry algorithm. [ABSTRACT FROM AUTHOR]

In order to achieve miniaturization, short-range radar (SRR) generally adopts millimeter-wave (MMW) radar with a frequency-modulated continuous-wave (FMCW) system, which may make the stop–go–stop assumption in traditional synthetic aperture radar (SAR) imaging algorithms invalid. In addition, in order to observe a large enough area, SRR often needs a wide radar beam, which may cause serious range–azimuth coupling when using SRR for SAR imaging. The above two problems may make the traditional SAR imaging algorithm invalid in SRR SAR imaging. Taking the SRR SAR imaging application into account, traditional frequency domain SAR imaging algorithms are analyzed and improved in this paper. Firstly, the intra-pulse motion (IPM) caused by the FMCW system and the two-dimensional coupling (TDC) in the case of a wide beam are analyzed. Subsequently, the applicability of the range Doppler algorithm (RDA), the frequency scaling algorithm (FSA) and the range migration algorithm (RMA) for SRR SAR is analyzed. Then, improvement measures are put forward to address the aliasing and folding phenomena caused by the wide-beam problem in the FSA and RMA, respectively. Finally, the effectiveness of the proposed algorithm is verified using simulation data and real measured data collected using an MMW radar fixed on a slide rail. [ABSTRACT FROM AUTHOR]

With the widespread application and functional complexity of deep neural networks (DNNs), the demand for training samples is increasing. This elevated requirement also extends to DNN-based SAR object detection. Most public SAR object detection datasets are oriented to marine targets such as ships, while data sets oriented to land targets are relatively rare, though they are an effective way to improve the land object detection capability of deep models through SAR sample generation. In this paper, a synthesis generation collaborative SAR sample augmentation framework is proposed to achieve flexible and diverse high-quality sample augmentation. First, a semantic-layout-guided image synthesis strategy is proposed to generate diverse detection samples. The issues of object location rationality and object layout diversity are also addressed. Meanwhile, a pix2pixGAN network guided by layout maps is utilized to achieve diverse background augmentation. Second, a progressive training strategy of diffusion models is proposed to achieve semantically controllable SAR sample generation to further improve the diversity of scene clutter. Finally, a sample cleaning method considering distribution migration and network filtering is employed to further improve the quality of detection samples. The experimental results show that this semantic synthesis generation method can outperform existing sample augmentation methods, leading to a comprehensive improvement in the accuracy metrics of classical detection networks. [ABSTRACT FROM AUTHOR]

Disasters broadly impact livelihood and the environment. Interrelated disasters cause significant casualties and loss because each type of disaster contributes to a series of impacts. An example of multiple disaster events in Indonesia is the 2018 Palu earthquake. This earthquake triggered tsunami, liquefaction, and rupture. Many studies on this earthquake only focused on either earthquake, tsunami, or liquefaction without conducting further impact analysis of a combined hazard. This study aimed to estimate tidal inundation in Palu City based on the deformation rate related to the earthquake and sea level rise. Synthetic Aperture Radar (SAR) data were processed with Parallel Small Baseline Subset Interferometry (P-SBAS) to produce a deformation rate using the Geohazard Exploitation Platform (GEP). This rate was then combined with DEMNAS data and modelled sea level to determine the spatial distribution of potential tidal inundation. The results indicated that when the Palu-Koro fault remains active, this activity could generate a tidal flood in 2050 and 2100. Flood prediction scenarios suggested that the impact covers central Palu, i.e., Palu Barat and Palu Timur districts, which is almost one-fifth of the research area. Mitigation has taken place through the construction of coastal dikes, except in a few areas. [ABSTRACT FROM AUTHOR]

Planetary radar observations have provided invaluable information on the solar system through both ground-based and space-based observations. In this overview article, we summarize how radar observations have contributed in planetary science, how the radar technology as a remote-sensing method for planetary exploration and the methods to interpret the radar data have advanced in the eight decades of increasing use, where the field stands in the early 2020s, and what are the future prospects of the ground-based facilities conducting planetary radar observations and the planned spacecraft missions equipped with radar instruments. The focus of the paper is on radar as a remote-sensing technique using radar instruments in spacecraft orbiting planetary objects and in Earth-based radio telescopes, whereas ground-penetrating radar systems on landers are mentioned only briefly. The key scientific developments are focused on the search for water ice in the subsurface of the Moon, which could be an invaluable in situ resource for crewed missions, dynamical and physical characterization of near-Earth asteroids, which is also crucial for effective planetary defense, and a better understanding of planetary geology. [ABSTRACT FROM AUTHOR]

In recent years, super-resolution imaging techniques have been intensely introduced to enhance the azimuth resolution of real aperture scanning radar (RASR). However, there is a paucity of research on the subject of sea surface imaging with small incident angles for complex scenarios. This research endeavors to explore super-resolution imaging for sea surface monitoring, with a specific emphasis on grounded or shipborne platforms. To tackle the inescapable interference of sea clutter, it was segregated from the imaging objects and was modeled alongside I/Q channel noise within the maximum likelihood framework, thus mitigating clutter's impact. Simultaneously, for characterizing the non-stationary regions of the monitoring scene, we harnessed the Markov random field (MRF) model for its two-dimensional (2D) spatial representational capacity, augmented by a quadratic term to bolster outlier resilience. Subsequently, the maximum a posteriori (MAP) criterion was employed to unite the ML function with the statistical model regarding imaging scene. This hybrid model forms the core of our super-resolution methodology. Finally, a fast iterative threshold shrinkage method was applied to solve this objective function, yielding stable estimates of the monitored scene. Through the validation of simulation and real data experiments, the superiority of the proposed approach in recovering the monitoring scenes and clutter suppression has been verified. [ABSTRACT FROM AUTHOR]

This work proposed a novel constant false alarm rate detection method based on Gaussian mixture model (GMM). The main contribution contains two aspects. First, the Gabor wavelet is used to determine the GMM component number. Second, the expression of probability of false alarm is derived based on the GMM parameter. [ABSTRACT FROM AUTHOR]

The Sissingué Gold Project is in Northern Côte d'Ivoire and part of the southern extension, a large peneplain of the landscape in South Mali. The area has experienced extensive weathering and erosion over a long time, resulting in a widespread and complex regolith cover. This diverse and vast regolith cover poses considerable difficulties for exploration. To overcome this problem, we adopted mapping of regolith units using machine learning (ML) with support vector machine (SVM) and artificial neural network (ANN) algorithms. The main objectives were to (1) make the predictive regolith map of the study region using these algorithms with data obtained from Landsat-8 operational land imager, Advanced Land Observing Satellite Phased Array Type L-Band Synthetic Aperture Radar digital elevation model and Sentinel-1A; (2) show the method of pre-processing and processing the required data and (3) develop the regolith landform unit (RLU) map from the predictive regolith map and collected data based on the Relict – Erosional – Depositional model. Tests using the SVM and ANN algorithms showed that both ML tools could accurately map regolith landforms. An innovative method of optimizing data using parameters is presented. The results showed that ANN outperformed SVM with an overall accuracy of 87.01% and a kappa coefficient of 0.84, whereas the corresponding values for SVM were 86.69% and 0.84, respectively. However, the validation data obtained from SVM-based prediction exhibited a better score than that of validation data obtained from ANN-based prediction. The Sentinel-1A radar band combined with Landsat-8 data reduced the vegetation-masking effect and improved the classification results. The RLUs of this area are composed primarily of relicts at 24.91%, including lateritic residuum and soil, depositional material at 36.39% with exotic sediments and ferrierite and the remaining 38.7% of erosional material made of saprolite, colluvial fragments, and mottled zones on flanks. [ABSTRACT FROM AUTHOR]

The shadow statistical method (SSM) used for extracting the significant wave height (SWH) from X-band marine radar images was further investigated because of its advantage of not requiring an external reference for calibration. Currently, a fixed shadow segmentation threshold is utilized to extract the SWH from a radar image based on the SSM. However, the retrieval accuracy of the SWH is not ideal for low wind speeds since the echo intensity of sea waves rapidly decays over distance. In order to solve this problem, an adaptive shadow threshold, which varies with echo intensity over distance and can accurately divide the radar image into shadow and nonshadow areas, is adopted to calculate the wave slope (WS) based on the texture feature of the edge image. Instead of using the averaged WS, the wave slope feature vector (WSFV) is constructed for retrieving the SWH since the illumination ratio and the calculated WS in the azimuth are different for shore-based radar images. In this paper, the SWH is calculated based on the constructed WSFV and classical support vector regression (SVR) technology. The collected 222 sets of X-band marine radar images with an SWH range of 1.0∼3.5 m and an average wind speed range of 5∼10 m/s were utilized to verify the performance of the proposed approach. The buoy record, which was deployed during the experiment, was used as the ground truth. For the proposed approach, the mean bias (BIAS) and the mean absolute error (MAE) were 0.03 m and 0.14 m when the ratio of the training set to the test set was 1:1. Compared to the traditional SSM, the correlation coefficient (CC) of the proposed approach increased by 0.27, and the root mean square error (RMSE) decreased by 0.28 m. [ABSTRACT FROM AUTHOR]

In classical radar imaging, such as in Earth remote sensing, electromagnetic waves are usually assumed to propagate in free space. However, in numerous applications, such as ground penetrating radar or non-destructive testing, this assumption no longer holds. When there is a multi-material background, the subsurface image reconstruction becomes considerably more complex. Imaging can be performed in the spatial domain or, equivalently, in the wavenumber domain (k-space). In subsurface imaging, to date, objects with a non-planar surface are commonly reconstructed in the spatial domain, by the Backprojection algorithm combined with ray tracing, which is computationally demanding. On the other hand, objects with a planar surface can be reconstructed more efficiently in k-space. However, many non-planar surfaces are partly planar. Therefore, in this paper, a novel concept is introduced that makes use of the efficient k-space-based reconstruction algorithms for partly planar scenarios, too. The proposed algorithm forms an image from superposing sub-images where as many image parts as possible are reconstructed in the wavenumber domain, and only as many as necessary are reconstructed in the spatial domain. For this, a segmentation scheme is developed to determine which parts of the image volume can be reconstructed in the wavenumber domain. The novel concept is verified by measurements, both from monostatic synthetic aperture radar data and multiple-input–multiple-output radar data. It is shown that the computational efficiency for imaging irregularly shaped geometries can be significantly augmented when applying the proposed concept. [ABSTRACT FROM AUTHOR]

The coupling at the interface between tectonic plates is a key geophysical parameter to capture the frictional locking across plate boundaries and provides a means to estimate where tectonic strain is accumulating through time. Here, we use both interferometric radar (InSAR) and Global Navigation Satellite System (GNSS) data to investigate the plate coupling of the Hikurangi subduction zone beneath the North Island of New Zealand, where multiple slow slip cycles are superimposed on the long‐term loading. We estimate the plate coupling across the subduction zone over three multi‐year observational periods targeting different stages of the slow slip cycle. Our results highlight the importance of the observational time period when interpreting coupling maps, emphasizing the temporal variability of plate coupling. Leveraging multiple geodetic data sets, we demonstrate how InSAR provides powerful constraints on the spatial resolution of both plate coupling and slow fault slip, even in a region where a dense GNSS network exists. Plain Language Summary: Plate coupling as a concept describes to what degree the boundaries between tectonic plates are locked and building up stress. Such accumulated stress (over hundreds to thousands of years) will eventually be released in earthquakes, and therefore provides important information about the potential for future earthquakes. Our study uses satellite data to investigate how coupling between tectonic plates along the Hikurangi subduction zone (New Zealand's largest and most dangerous plate boundary fault) changes with time. We analyzed Interferometric Synthetic Aperture Radar and Global Navigation Satellite System data to map the areas where the plates are stuck together (coupled) and where they move past each other (uncoupled). We show that plate coupling varies significantly in space over 2, 4, and 10‐year time scales, highlighting the importance of carefully considering the observational time period when interpreting coupling maps. Key Points: Integration of high‐resolution displacement maps from radar imagery captures plate coupling at fine scalesEstimates of plate coupling depend strongly on the time period over which surface velocities are measuredTemporal variations in plate coupling highlight when and where slow slip dominates the slip budget [ABSTRACT FROM AUTHOR]

A general limitation in assessing the accuracy of land cover mapping is the availability of ground truth data. At sites where ground truth is not available, potentially inaccurate proxy datasets are used for sub-field-scale resolution investigations at large spatial scales, i.e., in the Contiguous United States. The USDA/NASS Cropland Data Layer (CDL) is a popular agricultural land cover dataset due to its high accuracy (>80%), resolution (30 m), and inclusions of many land cover and crop types. However, because the CDL is derived from satellite imagery and has resulting uncertainties, comparisons to available in situ data are necessary for verifying classification performance. This study compares the cropland mapping accuracies (crop/non-crop) of an optical approach (CDL) and the radar-based crop area (CA) approach used for the upcoming NASA-ISRO Synthetic Aperture Radar (NISAR) L- and S-band mission but using Sentinel-1 C-band data. CDL and CA performance are compared to ground truth data that includes 54 agricultural production and research fields located at USDA's Beltsville Agricultural Research Center (BARC) in Maryland, USA. We also evaluate non-crop mapping accuracy using twenty-six built-up and thirteen forest sites at BARC. The results show that the CDL and CA have a good pixel-wise agreement with one another (87%). However, the CA is notably more accurate compared to ground truth data than the CDL. The 2017–2021 mean accuracies for the CDL and CA, respectively, are 77% and 96% for crop, 100% and 94% for built-up, and 100% and 100% for forest, yielding an overall accuracy of 86% for the CDL and 96% for CA. This difference mainly stems from the CDL under-detecting crop cover at BARC, especially in 2017 and 2018. We also note that annual accuracy levels varied less for the CA (91–98%) than for the CDL (79–93%). This study demonstrates that a computationally inexpensive radar-based cropland mapping approach can also give accurate results over complex landscapes with accuracies similar to or better than optical approaches. [ABSTRACT FROM AUTHOR]

This paper investigates the performance of a wide variety of radar imaging modes, such as nadir-looking B-scan, or side-looking synthetic aperture radar tomographic acquisitions, performed in both back- and forward-scattering geometries, for the inspection and characterization of roadways. Nadir-looking B-scan corresponds to a low-complexity mode exploiting the direct return from the response, whereas side-looking configurations allow the utilization of angular and polarimetric diversity in order to analyze advanced features. The main objective of this paper is to evaluate the ability of each configuration, independently of aspects related to operational implementation, to discriminate and localize shallow underground defects in the wearing course of roadways, and to estimate key geophysical parameters, such as roughness and dielectric permittivity. Campaign measurements are conducted using short-range radar stepped-frequency continuous-waveform (SFCW) devices operated in the C and X bands, at the pavement fatigue carousel of Université Gustave Eiffel, over debonded areas with artificial defects. The results indicate the great potential of the newly proposed forward-scattering tomographic configuration for detecting slight defects and characterizing roadways. Case studies, performed in the presence of narrow horizontal heterogeneities which cannot be detected using classical B-scan, show that both the coherent integration along an aperture using the back-projection algorithm, and the exploitation of scattering mechanisms specific to the forward-looking bistatic geometry, allows anomalous echoes to be detected and further characterized, confirming the efficacy of radar imaging techniques in such applications. [ABSTRACT FROM AUTHOR]

Wind turbines negatively affect the performance of weather radars, especially when located in the proximity of a radar site. In March 2019, MeteoSwiss performed a measurement campaign by deploying a mobile X-band radar in Schaffhausen. It proved to be useful for mapping and characterizing the maximum power returns by three wind turbines observed using standard scanning strategies. In March 2020, the campaign was repeated using a more sophisticated scan strategy: ∼ 100 min special sessions of fixed pointing an antenna towards the nacelle of the closest wind turbine (WT) located within a range of 7766 m from the radar, interleaved every 2 h by a scanning protocol identical to that of the March 2019 campaign. Polarimetric radar signatures were derived every 64 ms using 128 radar pulses transmitted every 0.5 ms (pulse repetition frequency (PRF) = 2000 Hz). A thorough overview of the polarimetric signatures of the WT in still or quasi-still conditions has been obtained based on 30 000 polarimetric measurables acquired over 32 min on the first day of the campaign (4 March 2020). During the first 2 min with zero rotor speed, the co-polar correlation coefficient between the orthogonal polarization states, ρHV , was persistently equal to 1, similarly to the signature of a bright scatterer observed by a non-rotating antenna. The changes between two consecutive values of the differential reflectivity and radar reflectivity factor were either 0 dBz or ± 0.5 dBz. Due to the absence of precipitation, one could assume that the standard deviation of the differential phase shift, which was as small as 3.0 ∘ , can be entirely attributed to the variability of the differential backscattering phase shift. There were two 10 min periods during which the rotor moved less than 1 revolution. It is worth noting that this slow movement could be associated with a change in the blade pitch angle and the nacelle orientation, which caused extreme changes in the radar reflectivity factor. For instance, two pairs of 64 ms consecutive values reached 78.5 dBz, which is the absolute maximum reached in the whole campaign (4–21 March 2020). [ABSTRACT FROM AUTHOR]

This paper presents for the first time the results of marine gravity recovery using the ocean observation data acquired by Tiangong-2 interferometric imaging radar altimeter (TG2 InIRA) which demonstrate not only the balanced accuracies of the north and east components of deflection of the vertical (DOV) as envisaged, but also the improved spatial resolutions of DOV compared with that by conventional altimeters (CAs). Moreover, much higher measurement efficiency owing to the wide-swath capability and the great potential in accuracy improvement of marine gravity field are also demonstrated. TG2 InIRA adopts the interferometry with short baseline and takes small incidence angles, by which wide-swath sea surface height (SSH) can be measured with high accuracy. Gravity recovery experiments in the Western Pacific area are conducted to demonstrate the performance, advantages and capability of TG2 InIRA. SSH data processing algorithms and DOV calculation have been designed by taking the wide-swath feature into account, based on which, the gravity anomalies are then calculated using the inverse Vening Meinesz formula. The derived gravity anomalies are compared with both the published gravity models and the shipborne gravity measurements. The results show that the accuracy of TG2 InIRA is equivalent to, or even a little better than, that of CAs. The fused gravity result using equal TG2 InIRA data and CAs data performs better than those using TG2 InIRA data alone or CAs data alone. Due to the signal bandwidth of TG2 InIRA is only 40 MHz which is much smaller than that of CAs, much higher accuracy can be hopefully achieved for future missions if larger signal bandwidth is used. [ABSTRACT FROM AUTHOR]

Different studies demonstrated that the monitoring of the vibrational characteristics of bridges can be fostered using real aperture radar interferometers. Commercial systems operating at Ku band have been made available to the users since the last two decades. Analyzing the phase of the radar signal, which is related to the displacement of the phase center of each radar range cell, the radar bin, a description of the vibrating mode of civil structures as bridges, towers, and tall buildings can be achieved. Displacement time series of different parts of the monitored structure can be processed to retrieve the frequency and amplitude of the vibrational modes to evaluate the dynamic behavior of the structure. Systems operating at higher frequencies and using advanced radar techniques have been recently proposed. Here we report the use of two different radar systems, working at Ku and K band respectively, to compare their performance, when used to monitor a railway bridge located in Spain. The radar acquisitions were realized by positioning the radar systems at different locations, to detect multiple vibrational modes. The results show a quite good agreement with accelerometer acquisitions, demonstrating the suitability of radar interferometers to measure bridge vibrations. [ABSTRACT FROM AUTHOR]

Based on the results of processing an interferometric pair of PALSAR-2 L-band synthetic aperture radar (SAR) images taken over the territory of the Bureya landslide in May 2019 and May 2020 from the ALOS-2 satellite, a new unstable surface region has been discovered. The average monthly rate of soil displacement was estimated to be up to 1 cm/month along the slope surface at the site of the formation of a new scarp. It is noted that the materials of interferometric processing of archival data did not previously reveal any movements of the slope surface in this place. The most probable reason for the activation of the landslide process in the new area is named: a violation of stability as a result of the descent in December 2018 of the underlying landslide body. [ABSTRACT FROM AUTHOR]

Aperture‐synthesis images of ionospheric irregularities in the equatorial electrojet are computed using multiple‐input multiple‐output (MIMO) radar methods at the Jicamarca Radio Observatory. MIMO methods increase the number of distinct interferometry baselines available for imaging (by a factor of essentially three in these experiments) as well as the overall size of the synthetic aperture. The particular method employed here involves time‐division multiplexing or time diversity to distinguish pulses transmitted from different quarters of the Jicamarca array. The method comes at the cost of a large increase in computation time and complexity and a reduced signal‐to‐noise ratio. We discuss the details involved in the signal processing and the trade space involved in image optimization. Key Points: Multiple‐input, multiple output (MIMO) radar imaging method implemented at Jicamarca to observe large‐scale waves in the equatorial electrojetSpecific method involves time division multiplexing or time diversityThe resolution of the images was increased but is limited by motion of scatterers which needs mitigation [ABSTRACT FROM AUTHOR]

The south polar layered deposits (SPLD) of Mars record its Amazonian climate history. Detailed stratigraphic analyses of the SPLD will improve our understanding of the Martian depositional system. Radar reflection patterns correlate with the varying composition of the internal layers, thus providing a key to unlocking the depositional history of the SPLD and Martian paleoclimate. Using data from SHAllow RADar (SHARAD) onboard the Mars Reconnaissance Orbiter, we studied a new type of weak reflection pattern (shadow zone) across the SPLD. These shadow zones lack identifiable bases and are generally deeper than previously reported low‐reflection zones interpreted as sealed CO2 ice. The discrepancy between the waveforms of shadow zones in focused and unfocused radargrams was used to identify whether the shadow zones were associated with fog‐related data‐processing artifacts. Numerical simulations utilizing various dielectric models demonstrate that lossy materials are most likely the cause of the shadow zone. These materials are expected to exhibit a gradual increase in concentration with depth, ranging from pure water ice to lossy materials at a scale of >50 m. The presence of such lossy materials is consistent with the compositional heterogeneity of SPLD, but their origins remain obscure. Plain Language Summary: Orbital radar data reveal diverse reflection patterns within the south polar layered deposits (SPLD) of Mars, providing valuable insights into their internal structure and composition. The reflection powers are low or even non‐existent when there is weak compositional variation or the material is lossy. This study reports and investigates a low‐reflection zone, referred to as the shadow zone, in the SHAllow RADar (SHARAD) data across the SPLD. The shadow zones exist in the background of a diffuse echo signature known as radar fog. Compared to previously reported low‐reflection zones, shadow zones typically lack a detectable base and exhibit significantly greater depth. We analyzed the waveform of the SHARAD radargrams and the results indicate the presence of two distinct types of shadow zones: one attributed to fog‐related artifacts, and the other classified as real shadow zones. Numerical simulations indicate the real shadow zones are likely linked to lossy materials such as salts, clays, and/or mafic minerals. These materials are expected to exhibit a distribution of gradual increasing concentration with depth in the SPLD. This research provides new insights into the internal composition of the SPLD and its potential relationship with the climate of Mars. Key Points: We explored shadow zones in SHAllow RADar data poleward at 80°S using radargrams before and after synthetic aperture processingThe shadow zones exhibit distinct morphologies from the previously identified reflectivity‐free zones, which were inferred to be dry iceForward modeling reveals that shadow zones likely associate with lossy materials conforming to a gradual increasing concentration with depth [ABSTRACT FROM AUTHOR]

Ground-based radar has been used for Moon imaging for more than 60 years. Five-hundred-meter Aperture Spherical radio Telescope (FAST), as the largest radio telescope on Earth, holds significant potential for celestial imaging missions with its exceptional sensitivity. A bistatic Synthetic Aperture Radar (SAR) Moon imaging model that incorporates FAST and other transmitting radars is presented. The objective of this paper is to design the imaging parameters of this bistatic configuration based on the required resolution, and to estimate the resolution performance based on a given bistatic system capability. Considering the ultra-far range and the ultra-long observation time between the radars and the Moon, the geometric relationship involved in this bistatic configuration is significantly distinct from the bistatic configuration of airborne and spaceborne radars. Therefore, this paper accurately derives the two-dimensional resolution on the Moon's surface. First of all, the models of the Earth's surface and the Moon's surface, and the celestial motion of the Earth and Moon are established using WGS-84 and JPL-DE421, given by STK. Secondly, the bistatic range history within the observation time is calculated in terms of continuous celestial motion instead of the popular 'stop-and-go' assumption. Thirdly, no approximation is used in the resolution derivation process, and, in addition to the two-dimensional resolutions, the incident angle and the included angle are also given to describe the imaging performance. This method can also be extended to other bistatic-station and single-station celestial imaging, providing support for radar location and parameters design, for observation time span selection, for observation area selection, and for imaging performance estimation. The echo generation and imaging for point targets set on the Moon are shown. The simulation results prove the validity and accuracy of the proposed method in the paper. [ABSTRACT FROM AUTHOR]

Feature extraction and recognition of underwater targets are important in military and civilian areas. This paper studied water surface acoustic wave (WSAW) detection by a millimeter wave (mmWave) radar. The mmWave-based endpoint detection method of the WSAW was introduced. Simulated results show that the continuous wavelet transform (CWT) method has a better detection performance. A 77 GHz large aperture antenna mmWave radar sensor and an underwater acoustic transmitter have been applied to conduct laboratory experiments. Still water surface experimental results verify that the CWT method has better detection capability, and the mmWave radar can accurately detect even 155 nm WSAW. Wavy water surface experimental results demonstrate the ability of the mmWave radar to analyze the time-frequency feature of the weak WSAW signal. These works indicate the potential of mmWave radar for the cross-medium detection and recognition of underwater targets. [ABSTRACT FROM AUTHOR]

Ground-based radar interferometry is capable of measuring target displacement to sub-mm accuracy. W-band ground-based radar has recently been investigated as a potential application for structural health monitoring. On the other hand, the application of W-band ground-based radar for natural slope monitoring is considered in this study due to its advantages in portability and recent cost-effective solutions. In radar interferometry, atmospheric phase screen (APS) is the most relevant phase disturbance that should be corrected for accurate displacement measurement. However, the APS effects in W-band radar interferometry have rarely been discussed. In this context, we study and evaluate the impacts of APS and its potential correction methods for 79 GHz ground-based radar interferometry using multiple-input and multiple-output (MIMO) radar. This paper presents an experimental investigation of a 79 GHz radar system using two types of field experiments conducted in an open flat field and a quarry site. In addition to the W-band radar system, a Ku-band (17 GHz) ground-based synthetic aperture radar (GB-SAR) system was jointly tested to compare different operating frequency bands. The result confirmed the accurate displacement estimation capability of the 79 GHz radar with an appropriate APS correction. [ABSTRACT FROM AUTHOR]

In this paper, the application of a hybrid representation in wide‐angle synthetic aperture radar (WASAR) imaging is investigated, addressing the challenge of achieving sparse representation in the presence of complex electromagnetic scattering characteristics and highly anisotropic targets. A convolutional neural network is utilized to represent the two‐dimensional data within each azimuth aperture, while employing blind compressed sensing (BCS) to achieve sparse representation across different azimuth apertures. Convolutional neural network (CNN) excels in learning spatial hierarchies and local dependencies of two‐dimensional data but requires a large amount of training data. Isotropic targets within each azimuth aperture can be used for training conventional SAR data, while acquiring training samples for anisotropic targets poses challenges. To address this issue, BCS are integrated into WASAR imaging, eliminating the need for additional training data. By integrating these methods, a novel approach called hybrid‐WASAR is proposed, which incorporates two regularization terms into WASAR imaging and employs the alternating direction method of multipliers to iteratively solve the imaging model. Compared to traditional WASAR imaging techniques, hybrid‐WASAR improves the accuracy of reconstructing the backscattering coefficients of the targets, leading to a significant enhancement in overall imaging quality. [ABSTRACT FROM AUTHOR]

This paper intends to propose an automated deep learning-based land cover classification model of remote sensing images. The model includes (i) pre-processing, (ii) feature extraction and (iii) classification. The captured synthetic-aperture radar (SAR) and Landsat-8 images are initially pre-processed using the Gabor filtering model. Subsequently, from SAR images the gray-level-co-occurrence matrix-based texture characteristics are extracted, and temperature vegetation index-based characteristics, normalized vegetation index-based features, normalized difference index-based features and coloration index features are extracted from Landsat-8 images. Finally, the extracted features are subjected to an optimized deep belief network (DBN), where the weight is fine-tuned by the optimization logic. For this, a new Sunflower adopted Red Deer (SARD) algorithm is introduced in this work that hybrids the concept of Red Deer algorithm and Sunflower optimization. The performance of the proposed classification model is compared over other conventional models concerning different measures. Especially, the accuracy of the presented work (SARD+DBN) for Testcase3 is 5, 7, 6 and 30% better than existing DA + DBN, JA + DBN, SLnO+DBN and LA + DBN methods, respectively. [ABSTRACT FROM AUTHOR]

High-fidelity deception jamming can seriously mislead synthetic aperture radar (SAR) image interpretation and target detection, which is difficult to identify or eliminate through traditional anti-jamming methods. Based on the range–Doppler algorithm (RDA), an anti-jamming method for SAR using joint waveform modulation and azimuth mismatched filtering is proposed in this letter. The signal model of SAR echo after pulse compression with deception jamming is derived from the radar detection and jamming characteristics. A multiobjective cost function is introduced to suppress the jamming level and keep the real target information, parameterized with the waveform initial phase and the azimuth mismatched filter coefficients, which is optimized using the second-order Taylor expansion approximation and the alternating direction multiplier method (ADMM). The performance of this proposed method is evaluated through the convergence analysis and anti-jamming experiments on the point target and the distributed target scenarios. [ABSTRACT FROM AUTHOR]

Along-track synthetic aperture radar interferometry (ATI) systems are used to detect a moving target and to estimate its radial velocity. A dual-channel (single-baseline) ATI system estimates the velocity ambiguously because there are many candidate velocities corresponding to the interferometric phase. To resolve the ambiguity of the estimates, a multichannel (multibaseline) ATI system is required. This letter proposes an efficient implementation technique of a multichannel ATI system by using a frequency-modulated continuous wave (FMCW) radar and an antenna arrangement method considering the inherent bi-static characteristic of FMCW radars. Also, a simple and robust radial velocity estimation algorithm suitable for the proposed system model is presented. The validity of the algorithm is confirmed with simulated ATI results. [ABSTRACT FROM AUTHOR]

Floods cause loss of lives and multibillion dollar damages every year. When these events strike, automated tools using remote sensing for quick mapping of the affected areas are critical for planning rescue activities and assessing impact. The most recent techniques to map floods are based on semantic segmentation and deep learning, which require large datasets and ground truth for training, which are difficult to get. To overcome this challenge, we propose an effective method for synthesizing patches of synthetic aperture radar (SAR) images containing open-land flooded areas. With bitemporal image acquisitions, we replace portions of land areas in the second acquisition with water pixels borrowed from permanent water bodies. Spatial patterns derived from elevation data help guide the process. With this approach, we build a large dataset with pre- and post-event Sentinel-1-based VH-polarized radar intensity images to train deep neural networks to map real-life floods. In a case study, we use an established U-Net architecture and show that a model version with less than 2% of the number of original parameters achieves almost identical flood detection accuracy. This allows for faster processing and is a clear advantage from an operational perspective. For comparison, we provide empirical segmentation results of four flood cases. F1 scores agree between 0.80 and 0.90 when compared with reference flood maps from the Copernicus service. This confirms that the approach is valuable for mapping areas affected by floods, e.g., during or immediately after catastrophic events, even in areas that were not included during model training. [ABSTRACT FROM AUTHOR]

Sea surface salinity (SSS) is measured operationally with radiometers [e.g., soil moisture and ocean salinity (SMOS)] with a resolution from 25 to 40 km. In this contribution, we theoretically evaluate radar sensitivity to SSS, especially we focus on synthetic aperture radar (SAR) due to its intrinsic high-resolution imaging capabilities. This work focuses first on the variations in the dielectric properties of seawater with salinity at different SAR frequency bands (P-, L-, and C-bands) and then evaluate the consequences of both on the normalized radar cross section (NRCS) and copolar phase difference (CPD). The main challenge is to disentangle the sensitivity to dielectric properties from the surface roughness contribution in the SAR backscattered signals. In line with the literature, the results show that the NRCS sensitivity with salinity increases with decreasing operating frequency. In addition, we present new theoretical results on salinity sensitivity to CPD that have not been explored in the existing literature. [ABSTRACT FROM AUTHOR]

Inundation dynamics are the primary control on greenhouse gas emissions from peatlands. Situated in the central Congo Basin, the Cuvette Centrale is the largest tropical peatland complex. However, our knowledge of the spatial and temporal variations in its water levels is limited. By addressing this gap, we can quantify the relationship between the Cuvette Centrale's water levels and greenhouse gas emissions, and further provide a baseline from which deviations caused by climate or land-use change can be observed, and their impacts understood. We present here a novel approach that combines satellite-derived rainfall, evapotranspiration and L-band Synthetic Aperture Radar (SAR) data to estimate spatial and temporal changes in water level across a sub-region of the Cuvette Centrale. Our key outputs are a map showing the spatial distribution of rainfed and flood-prone locations and a daily, 100 m resolution map of peatland water levels. This map is validated using satellite altimetry data and in situ water table data from water loggers. We determine that 50% of peatlands within our study area are largely rainfed, and a further 22.5% are somewhat rainfed, receiving hydrological input mostly from rainfall (directly and via surface/sub-surface inputs in sloped areas). The remaining 27.5% of peatlands are mainly situated in riverine floodplain areas to the east of the Congo River and between the Ubangui and Congo rivers. The mean amplitude of the water level across our study area and over a 20-month period is 22.8 ± 10.1 cm to 1 standard deviation. Maximum temporal variations in water levels occur in the riverine floodplain areas and in the inter-fluvial region between the Ubangui and Congo rivers. Our results show that spatial and temporal changes in water levels can be successfully mapped over tropical peatlands using the pattern of net water input (rainfall minus evapotranspiration, not accounting for run-off) and L-band SAR data. [ABSTRACT FROM AUTHOR]

A radar altimeter (RA) is useful to improve autonomous functions such as landing guidance or navigation control of an aircraft. To ensure more precise and safer flights by aircraft, an interferometric RA (IRA) capable of measuring the angle of a target is required. However, the phase-comparison monopulse (PCM) technique used in IRAs has a problem in that an angular ambiguity arises with respect to a target with multiple reflection points, such as terrain. In this paper, we propose an altimetry method for IRAs that reduces the angular ambiguity by evaluating the quality of the phase. The altimetry method as introduced here is sequentially described based on synthetic aperture radar, a delay/Doppler radar altimeter, and PCM techniques. Finally, a phase quality evaluation method is proposed for use in the azimuth estimation process. Aircraft captive flight test results are presented and analyzed, and the validity of the proposed method is examined. [ABSTRACT FROM AUTHOR]

Radar is a common means of tracking a target, and with active enemy interference, it often causes the target to lose its track, thus causing the radar to lose continuous tracking of the target. To improve the tracking effect, a multi-sensor cooperative detection target tracking method based on radar photoelectric linkage control was established. The study is based on radar photoelectric linkage, constant velocity (CV), constant acceleration (CA) and current statistical model (CSM) as the mathematical model of moving targets for this study. Improved interactive multi-model (IMM) and standard IMM were compared for targets in different motion states, as well as single sensor electronic support measures (ESM) and multi-sensor electronic support measures (ESM), infrared search and track (IRST). The research results show that in variable speed motion, the improved IMM algorithm and multiple sensors are used for target tracking. The azimuth and elevation tracking errors of the target are low, which can effectively solve the problem of model mismatch during the conversion of motion modes such as CV and CA. The azimuth and elevation image curves fluctuate smoothly, and have high stability. This method can achieve better tracking results. [ABSTRACT FROM AUTHOR]

In ground static target detection, polarimetric high-resolution radar can distinguish the target from the strong ground clutter by reducing the clutter power in the range cell and providing additional polarimetric features. Since the energy of a target is split over several range cells, the resulting detection problem is called polarimetric range extended target (RET) detection, where all target scattering centers should be considered. In this paper, we propose a novel polarimetric RET detection method via adaptive range weighted feature extraction. Specifically, polarimetric features of range cells are extracted, and a pretrained attention-mechanism-based module is used to adaptively calculate range cells weights, which are used to accumulate the range cells features as detection statistics. While calculating weights, both amplitude and polarimetric features are considered. This method can make the most of polarization information and improve the accumulation effect, thus increasing the discrimination between targets and clutter. The effectiveness of the proposed method is verified compared to both popular energy-domain detection methods and existing feature-domain detection methods, and the results show that our method exhibits superior detection performance. Moreover, we further analyze our method on different target models and different clutter distributions to prove that our method is suitable for different types of targets and clutter. [ABSTRACT FROM AUTHOR]

One of the current research areas in the synthetic aperture radar (SAR) processing fields is deep learning-based ship detection in SAR imagery. Recently, ship detection in SAR images has achieved continuous breakthroughs in detection precision. However, determining how to strike a better balance between the precision and complexity of the algorithm is very meaningful for real-time object detection in real SAR application scenarios, and has attracted extensive attention from scholars. In this paper, a lightweight object detection framework for radar ship detection named multiple hybrid attentions ship detector (MHASD) with multiple hybrid attention mechanisms is proposed. It aims to reduce the complexity without loss of detection precision. First, considering that the ship features in SAR images are not inconspicuous compared with other images, a hybrid attention residual module (HARM) is developed in the deep-level layer to obtain features rapidly and effectively via the local channel attention and the parallel self-attentions. Meanwhile, it is also capable of ensuring high detection precision of the model. Second, an attention-based feature fusion scheme (AFFS) is proposed in the model neck to further heighten the features of the object. Meanwhile, AFFS constructs and develops a fresh hybrid attention feature fusion module (HAFFM) upon the local channel and spatial attentions to guarantee the applicability of the detection model. The Large-Scale SAR Ship Detection Dataset-v1.0 (LS-SSDD-v1.0) experimental results demonstrate that MHASD can balance detection speed and precision (improving average precision by 1.2% and achieving 13.7 GFLOPS). More importantly, extensive experiments on the SAR Ship Detection Dataset (SSDD) demonstrate that the proposed method is less affected by the background such as ports and rocks. [ABSTRACT FROM AUTHOR]

The goal of this paper is to propose a method to achieve a higher classification rate in Polarimetric Synthetic Aperture Radar (PolSAR) image classification. In our work, PolSAR features are extracted from Convolutional Neural Networks (CNNs) and also Graph Convolutional Networks (GCNs). Due to the construction of the adjacency matrix on all the data, traditional GCNs usually suffer from a substantial computational cost, particularly in large‐scale remote sensing (RS) problems. To this end, first of all, we propose a new mini‐batch GCN (called Mini‐GCN), which allows to train large‐scale GCNs in a mini‐batch fashion. More significantly, our designed mini‐GCN is capable of inferring out‐of‐sample data without re‐training networks and improving classification performance. Furthermore, as CNNs and GCNs can extract different types of PolSAR features, an intuitive solution to break the performance bottleneck of a single model is to fuse them. Since mini‐GCNs can perform batch‐wise network training (enabling the combination of CNNs and GCNs), we can use the feature fusion strategy. Therefore, in this paper, a local graph‐based fusion method is proposed to couple dimension reduction and feature fusion of the information extracted from the designed CNN and Mini‐GCN. Experimental results on real PolSAR data are very encouraging. Compared to the methods using only single feature and stacking all the features together, the proposed feature fusion method improves the overall classification accuracy on the real PolSAR data sets for more than 5%. Moreover, the experiments conducted on PolSAR datasets, demonstrate the advantages of the used mini‐GCNs over the traditional GCNs and the superiority of the proposed feature fusion method with regards to the single CNN or GCN models. [ABSTRACT FROM AUTHOR]

The sparse array imaging radar could largely reduce the system complexity, but it also suffers from poor azimuthal resolution due to the limited aperture length and incomplete observation caused by non-uniform array configuration. In this letter, a radar forward-looking imaging method with improved imaging quality and reduced system complexity is proposed. Firstly, the matrix completion method is utilized to recover the missing signals of sparse array. Then, based on the plane-wave assumption, a fast 2-dimensional atomic norm minimization (ANM) is adopted to solve the positions and amplitudes of scatterers. As a continues compressed sensing method, the result of ANM-based method earns sharper main-lobes and much lower-level side-lobes compared to the fast Fourier transform -based method. Although the resolution of proposed method is still limited by Rayleigh resolution, the imaging quality can be greatly improved by emphasizing main-lobes and avoiding the perturbation of side-lobes. Simulations and experiments are carried out to demonstrate the performance of the proposed method. [ABSTRACT FROM AUTHOR]

Atmospheric delay is the primary error in ground-based synthetic aperture radar (GBSAR). The existing compensation methods include the external meteorological data correction method, the polynomial fitting method, and the persistent scatterers SAR interferometry (PSInSAR) calibration method. Combining the polynomial fitting and the persistent scatterers targets is the most popular method of GBSAR atmospheric delay compensation. However, the displacement component of the coherent target is always ignored in the atmospheric delay compensation, which is unpractical. A joint estimation method of ground displacement and atmospheric model parameters is developed in this paper. The displacement component is determined by the spatial and temporal features of the objects. The atmospheric delay component is regarded as a systematic error represented by a quadratic polynomial related to distance. The result is resolved by the least-square method. Compared to the existing method, the root-mean-square error (RMSE) of the proposed method had a significant improvement in the validation experiment. In the real in situ experiment, the time series obtained by the GBSAR had a similar trend to that acquired by the Global Positioning System (GPS) receiver. It is indicated that the proposed method can lead to a better deformation estimation by taking the deformation component into account in the atmospheric compensation. [ABSTRACT FROM AUTHOR]

The cooperative imaging of the bistatic radar is an important research topic for missile-borne radar detection. The existing missile-borne radar detection system is mainly based on the target plot information separately extracted by each radar for data level fusion, without considering the gain brought by the cooperative processing of the radar target echo signal. In this paper, a random frequency-hopping waveform is designed for the bistatic radar to achieve efficient motion compensation. A coherent processing algorithm for bistatic echo signals is designed to achieve band fusion and improve the signal quality and range resolution of the radar. Simulation and high-frequency electromagnetic calculation data were used to verify the effectiveness of the proposed method. [ABSTRACT FROM AUTHOR]

Sleep posture has a crucial impact on the incidence and severity of obstructive sleep apnea (OSA). Therefore, the surveillance and recognition of sleep postures could facilitate the assessment of OSA. The existing contact-based systems might interfere with sleeping, while camera-based systems introduce privacy concerns. Radar-based systems might overcome these challenges, especially when individuals are covered with blankets. The aim of this research is to develop a nonobstructive multiple ultra-wideband radar sleep posture recognition system based on machine learning models. We evaluated three single-radar configurations (top, side, and head), three dual-radar configurations (top + side, top + head, and side + head), and one tri-radar configuration (top + side + head), in addition to machine learning models, including CNN-based networks (ResNet50, DenseNet121, and EfficientNetV2) and vision transformer-based networks (traditional vision transformer and Swin Transformer V2). Thirty participants (n = 30) were invited to perform four recumbent postures (supine, left side-lying, right side-lying, and prone). Data from eighteen participants were randomly chosen for model training, another six participants' data (n = 6) for model validation, and the remaining six participants' data (n = 6) for model testing. The Swin Transformer with side and head radar configuration achieved the highest prediction accuracy (0.808). Future research may consider the application of the synthetic aperture radar technique. [ABSTRACT FROM AUTHOR]

Ground-based synthetic aperture radars (GBSAR) are popular instruments widely used for the monitoring of infrastructures. One of the main problems of ground-based interferometric radars is the elevation ambiguity. Multiple-input multiple-output (MIMO) arrays could solve this problem. This work proposes a study on possible MIMO configurations to achieve elevation resolution in ground-based radar measurements. Specifically, two array configurations are compared: a random sparse array suitable for the compressive sensing technique, and a non-uniform array. The two solutions are compared by means of simulations and experimental tests. An ad hoc system has been developed to jointly test the two configurations, and results obtained in a controlled and real urban scenario are shown. It is found that both systems are able to solve elevation ambiguity. The non-uniform array seems to achieve good performance in a general scenario, while the CS processing can outperform the other only after optimization, depending on the specific scenario and application. [ABSTRACT FROM AUTHOR]

Synthetic Aperture Radar (SAR) Coherent Change Detection (CCD) allows for the detection of very small scene changes. This is particularly useful for reconnaissance and surveillance as small changes such as vehicle tracks can be identified. In some situations, it is desirable to rapidly collect repeat pass SAR images for use in change detection, and multistatic geometries may facilitate this. Such repeat passes may however have significant baselines, particularly for satellite‐based platforms, though CCD products are reliant on high coherence for good interpretability. This work investigates the sources and levels of incoherence associated with bistatic SAR imagery with increasing baselines using simulations and measured laboratory data. [ABSTRACT FROM AUTHOR]

Synthetic Aperture Radar (SAR) renderings in 3D provide additional target information when compared to 2D by separating out features overlaid in height. However, the required 2D SAR aperture, when Nyquist sampled, necessitates large scanning times that would be impractical for most realistic collections. This research has developed a novel volumetric approach to sparse aperture 3D SAR imaging, which is applicable to bistatic SAR near‐field geometries, a generalization of far‐field cases. This approach is first demonstrated in simulation and then applied to a measured scene containing a model vehicle target, producing sub‐Nyquist sampled 3D SAR renderings. [ABSTRACT FROM AUTHOR]

Crop type mapping visualizes the spatial distribution pattern and proportion of planting areas of different crop types, which is the basis for subsequent agricultural applications. Although optical remote sensing has been widely used to monitor crop dynamics, data are not always available due to cloud and other atmospheric effects on optical sensors. Satellite microwave systems such as Synthetic Aperture Radar (SAR) have all-time and all-weather advantages in monitoring ground and crop conditions, combining optical imagery and SAR imagery for crop type classification is of great significance. Our study mainly proposes seven feature combination schemes based on the combination of multi-temporal spectral features and texture features of Sentinel-2 (S2), and radar backscattering features of Sentinel-1 (S1) evaluate the influence of different data sources and different features on classification accuracy, obtains the optimal classification strategy and analyses the contribution of different features to classification result, in the aim of providing a new technical approach for the fine identification of crops from multi-source remote-sensing data. Results show that the crop classification accuracy of combined multi-time series spectral, texture, and radar features is higher than that of combining two types of features. The features subset selected by multi-period spectral, texture, and radar features have the best classification result, the overall accuracy (OA) and kappa coefficients reach 96.40% and 0.93, respectively. The study provides a method reference for future research on larger-scale remote-sensing crop precise extraction. [ABSTRACT FROM AUTHOR]

In a distributed frequency-modulated continuous waveform (FMCW) radar system, the echo data collected are not continuous in the azimuth direction, so the imaging effect of the traditional range-Doppler (RD) algorithm is poor. Sparse Bayesian learning (SBL) is an optimization algorithm based on Bayesian theory that has been successfully applied to high-resolution radar imaging because of its strong robustness and high accuracy. However, SBL is highly computationally complex. Fortunately, with FMCW radar echo data, most of the time-consuming SBL operations involve a Toeplitz-block Toeplitz (TBT) matrix. In this article, based on this advantage, we propose a fast SBL algorithm that can be used to obtain high-angular-resolution images, in which the inverse of the TBT matrix can be transposed as the sum of the products of the block lower triangular Toeplitz matrix and the block circulant matrix by using a new decomposition method, and some of the matrix multiplications can be quickly computed using the fast Fourier transform (FFT), decreasing the computation time by several orders of magnitude. Finally, simulations and experiments were used to ensure the effectiveness of the proposed algorithm. [ABSTRACT FROM AUTHOR]

Synthetic aperture radar with polarimetric diversity is a powerful tool in remote sensing. Each pixel is described by the scattering matrix corresponding to the emission/reception polarization states (usually horizontal and vertical). The algebraic real representation, a block symmetric matrix form, is introduced to adopt a more comprehensive framework (non-restricted by reciprocity assumptions) in mapping the scattering matrix by the consimilarity equivalence relation. The proposed representation can reveal potentially new information. For example, its eigenvalue decomposition, which is itself a necessary step in obtaining the consimilarity transformation products, may be useful in characterizing the degree of reciprocity/nonreciprocity. As a consequence, it can be employed in testing the reciprocity compliance assumed with monostatic PolSAR data. Full-wave simulated polarimetric data confirm that oriented scatterers can present complex eigenvalues, even with the monostatic geometry. [ABSTRACT FROM AUTHOR]

Deformations affect the structural integrity of wind turbine towers. The health of such structures is thus assessed by monitoring. The majority of sensors used for this purpose are costly and require in situ installations. We investigated whether Multiple-Input Multiple-Output Synthetic Aperture Radar (MIMO-SAR) sensors can be used to monitor wind turbine towers. We used an automotive-grade, low-cost, off-the-shelf MIMO-SAR sensor operating in the W-band with an acquisition frequency of 100 Hz to derive Line-Of-Sight (LOS) deformation measurements in ranges up to about 175 m. Time series of displacement measurements for areas at different heights of the tower were analyzed and compared to reference measurements acquired by processing video camera recordings and total station measurements. The results showed movements in the range of up to 1 m at the top of the tower. We were able to detect the deformations also with the W-band MIMO-SAR sensor; for areas with sufficient radar backscattering, the results suggest a sub-mm noise level of the radar measurements and agreement with the reference measurements at the mm- to sub-mm level. We further applied Fourier transformation to detect the dominant vibration frequencies and identified values ranging from 0.17 to 24 Hz. The outcomes confirmed the potential of MIMO-SAR sensors for highly precise, cost-efficient, and time-efficient structural monitoring of wind turbine towers. The sensors are likely also applicable for monitoring other high-rise structures such as skyscrapers or chimneys. [ABSTRACT FROM AUTHOR]

This paper proposes a method for efficient and accurate removal of grating lobes in automotive Synthetic Aperture Radar (SAR) images. Grating lobes can indeed be mistaken as real targets, inducing in this way false alarms in the target detection procedure. Grating lobes are present whenever SAR focusing is performed using data acquired on a non-continuous basis. This kind of acquisition is typical in the automotive scenario, where regulations do not allow for a continuous operation of the radar. Radar pulses are thus transmitted and received in bursts, leading to a spectrum of the signal containing gaps. We start by deriving a suitable reference frame in which SAR images are focused. It will be shown that working in this coordinate system is particularly convenient since it allows for a signal spectrum that is space-invariant and with spectral gaps described by a simple one-dimensional function. After an inter-burst calibration step, we exploit these spectral characteristics of the signal by implementing a compressive sensing algorithm aimed at removing grating lobes. The proposed approach is validated using real data acquired by an eight-channel automotive radar operating in burst mode at 77 GHz. Results demonstrate the practical possibility to process a synthetic aperture length as long as up to 2 m reaching in this way extremely fine angular resolutions. [ABSTRACT FROM AUTHOR]