Search

Printed circuit heat exchangers (PCHEs) are widely used as recuperators in the supercritical carbon dioxide (S-CO2) Brayton cycle design. The variation of heat sources will have a great impact on the heat transfer effect of the recuperator. It is of interest to study the fast calculation of flow and heat transfer performance of PCHEs under different operating conditions to obtain the optimal comprehensive performance and provide guidance for the operation control strategy analysis. Herein, a fast calculation method is established through a one-dimensional model of a PCHE based on Modelica. The effects of working medium mass flow rate and inlet temperature on the flow and heat transfer process are analyzed from the three aspects of heat transfer rate, flow pressure drop, and comprehensive performance, and the mass flow rate matching optimization is realized. The results show that increased mass flow rate increases heat transfer rate and flow pressure drop. The efficiency evaluation coefficient (EEC) has a maximum value at which the mass flow rate values of the cold and hot channels are best matched, and the comprehensive performance is optimal. When the mass flow rate of the heat channel is 4.8 g/s, the maximum EEC is 1.42, corresponding to the mass flow rate of the cold channel, 4.2 g/s. Compared with the design condition, the heat transfer rate increases by 62.1%, and the total pump power increases by 14.2%. When the cold channel inlet temperature increases, EEC decreases rapidly, whereas EEC increases when the hot channel inlet temperature increases. The conclusions can provide theoretical support for the design and operation of PCHEs. [ABSTRACT FROM AUTHOR]

In this work, the heat transfer characteristics of supercritical pressure CO2 in vertical heating tube with 10 mm inner diameter under high mass flux were investigated by using an SST k-ω turbulent model. The influences of inlet temperature, heat flux, mass flux, buoyancy and flow acceleration on the heat transfer of supercritical pressure CO2 were discussed. Our results show that the buoyancy and flow acceleration effect based on single phase fluid assumption fail to explain the current simulation results. Here, supercritical pseudo-boiling theory is introduced to deal with heat transfer of scCO2. scCO2 is treated to have a heterogeneous structure consisting of vapor-like fluid and liquid-like fluid. A physical model of scCO2 heat transfer in vertical heating tube was established containing a gas-like layer near the wall and a liquid-like fluid layer. Detailed distribution of thermophysical properties and turbulence in radial direction show that scCO2 heat transfer is greatly affected by the thickness of gas-like film, thermal properties of gas-like film and turbulent kinetic energy in the near-wall region. Buoyancy parameters Bu < 10−5, Bu* < 5.6 × 10−7 and flow acceleration parameter Kv < 3 × 10−6 in this paper, which indicate that buoyancy effect and flow acceleration effect has no influence on heat transfer of scCO2 under high mass fluxes. This work successfully explains the heat transfer mechanism of supercritical fluid under high mass flux. [ABSTRACT FROM AUTHOR]