Search

This paper introduces the concept of intermittently connected sensor networks where sensors are sleep most of time and become active randomly and rarely. In the networks, packet collision probability and power consumption can be reduced. Meanwhile, the delivery delay increases with the use of the low activation values. In this paper, we design the energy‐efficient intermittently connected sensor networks, considering this trade‐off of activation control. We first provide the algorithm that computes the optimal packet forwarding rule achieving the minimum delivery delay, which can be calculated using the activation rates. We then propose the activation rate control methods, which control the activation rates of the sensors based on the density of the sensors and/or the number of wake‐ups of sensors having relay packets. By doing this, we can improve the delay performance, while suppressing the increase in the packet collision probability and the power consumption of sensors. Through simulation experiments, we demonstrate the effectiveness of our activation control methods in the intermittently connected sensor networks. © 2021 Institute of Electrical Engineers of Japan. Published by Wiley Periodicals LLC. [ABSTRACT FROM AUTHOR]

This paper presents a novel distributed method for dynamic economic dispatch (DED) problems with cubic fuel cost functions based on the dual alternating direction method of multipliers (D‐ADMM) and interior point method (IPM). This scheme enables us to combine the excellent parallelism of ADMM with the superior convergence properties of the IPM. The idea adopted by the proposed algorithm is that the outer‐loop uses ADMM decoupling, and the inner‐loop uses IPM to solve the cubic polynomial optimization subproblems. When the unit set is divided into multiple partitions, D‐ADMM also has the nice central processing unit (CPU) runtime as the well as the number of iterations. In addition, we use a Decoupling‐Decomposition‐Backtracking and parallel improved multiple centrality corrections decoupling interior point method (DDB‐PIMCCD) to solve the aforementioned larger subproblems more efficiently. Finally, the numerical results, in both serial and parallel modes, on a set of 22 DED cases with the range of units from 8 to 1000 units show that the proposed method is very promising for large scale distributed DED problems. Because it can keep the unit information about each subset in secret to suit the market environment and can obtain high‐quality solutions with reasonable time. © 2020 Institute of Electrical Engineers of Japan. Published by Wiley Periodicals LLC. [ABSTRACT FROM AUTHOR]

The maximum correntropy criterion (MCC) algorithm has popularly been used in suppressing impulsive noise. It mainly relies on the choice of step size and kernel width. With the study of step size, this paper proposes a novel algorithm that updates the step size based on constructing a variable step size function that uses the moving weighted average algorithm to keep performance stable and sigmoid function to speed the convergence rate. The proposed algorithm is robust against impulsive noises and generates a large step size to accelerate the convergence in iteration beginning, and system mutation makes the system identification performance more stable when the error is small. Based on the improved variable kernel width maximum entropy criterion (IVKW‐MCC) algorithm, which overcomes the shortcoming of how to choose a reliable kernel width in the MCC algorithm, simulation results are compared with other MCC algorithms under impulsive noise interference. Simulations in the system identification scenarios show that the proposed algorithm has better performance in improving the convergence speed over other algorithms. © 2020 Institute of Electrical Engineers of Japan. Published by Wiley Periodicals LLC. [ABSTRACT FROM AUTHOR]

Impedance cardiography (ICG) and peripheral bioimpedance may be useful for monitoring several cardiovascular parameters such as cardiac output, stroke volume, blood pressure and heart rate. It is a noninvasive and low‐cost method and could be useful for diagnosis and treatment in different clinical situations. This study involved 100 volunteers and their age ranging from 18 to 26 years. The acquired bioimpedance signal was pre‐processed and used to estimate the heart rate. Thus, heart rates of each subject were calculated and then compared with actual measurement from FUZZY model MP3 digital blood pressure monitor. The results showed high precision with a 1.38 mean error a high sensitivity of 99.81% and a positive predictivity value of 99.63%, respectively. Compared with six other methods selected from the literature review and which are initially dedicated to ECG signals, the proposed method has been found to be more efficient and more precise with an error in determining the percentile HR = 1.78%. © 2022 Institute of Electrical Engineers of Japan. Published by Wiley Periodicals LLC. [ABSTRACT FROM AUTHOR]

A simple and fast diagnostic method for multiple open‐circuit faults in voltage‐source inverters based on the current vector phase is proposed. The characteristics of the current vector phase in both healthy and faulty conditions are analyzed in detail, and simple fault symptom variables are defined to extract the features for fault isolation. The proposed method can diagnose 21 types of open‐circuit faults only by using current vector phase information, and it is fast, robust and easy to implement in existing systems without additional sensors. Several experimental results verify that the diagnostic algorithm has no false alarms under speed and load transient conditions, and the fault can be isolated within 15% of the current fundamental cycle in the case of the fastest diagnostic process and no more than 80% of the current cycle in the worst cases. © 2021 Institute of Electrical Engineers of Japan. Published by Wiley Periodicals LLC. [ABSTRACT FROM AUTHOR]