Search

The recent development of satellite products for observing precipitation based on different technologies (microwaves, infrared, etc.) allows for near-real-time meteorological studies. The purpose of this article is to evaluate 11 satellite products (GHE, PDIR, IMERG-Early v6, IMERG-Late v6, CMORPH v0.x, CMORPH-RT v0.x, GSMaP-NRT v7, GSMaP-NRT-GC v7, GSMaP-NOW v7, GSMaP-NOW-GC v7, and DATABOURG) currently available and compare them to 2 ground-based radar networks (PANTHERE and OPERA) and the French rain-gauge network RADOME. Two case studies of intense precipitation over France (22 to 25 April 2022 and 24 to 29 June 2022) were selected. The radar estimations are closer to the RADOME observations than the satellite-based estimations, which tend to globally underestimate the precipitation amounts over the areas of interest while OPERA tends to strongly overestimate precipitation amounts during the June case study. The PANTHERE radar product and the carrier-to-noise product DATABOURG shows promising results. Near-real-time satellite products tend to have closer precipitation amounts to the reference dataset than satellite products with a shorter latency. The use of these datasets for nowcasting developments is plausible but further analyses must be conducted beforehand. [ABSTRACT FROM AUTHOR]

In this work, Advanced SCATterometer (ASCAT) backscatter data are directly assimilated into the interactions between soil, biosphere, and atmosphere (ISBA) land surface model using Meteo-France's global Land Data Assimilation System (LDAS-Monde) tool in order to jointly analyse soil moisture and leaf area index (LAI). For the first time, observation operators based on neural networks (NNs) are trained with ISBA simulations and LAI observations from the PROBA-V satellite to predict the ASCAT backscatter signal. The trained NN-based observation operators are implemented in LDAS-Monde, which allows the sequential assimilation of backscatter observations. The impact of the assimilation is evaluated over southwestern France. The simulated and analysed backscatter signal, surface soil moisture, and LAI are evaluated using satellite observations from ASCAT and PROBA-V as well as in situ soil moisture observations. An overall improvement in the variables is observed when comparing the analysis with the open-loop simulation. The impact of the assimilation is greater over agricultural areas. [ABSTRACT FROM AUTHOR]

This article presents a new Cloud Radar calibration methodology using solid reference reflectors mounted on masts, developed during two field experiments held in 2018 and 2019 at the SIRTA atmospheric observatory, located in Palaiseau, France, in the framework of the ACTRIS-2 research and innovation program. The experimental setup includes 10 cm and 20 cm triangular trihedral targets installed at the top of 10 m and 20 m masts, respectively. The 10 cm target is mounted on a pan-tilt motor at the top of the 10 m mast to precisely align its boresight with the radar beam. Sources of calibration bias and uncertainty are identified and quantified. Specifically, this work assesses the impact of receiver compression, incomplete antenna overlap, temperature variations inside the radar, clutter and experimental setup misalignment. Setup misalignment is a source of bias previously undocumented in the literature, that can have an impact on the order of tenths of dB in calibration retrievals of W band Radars. A detailed analysis enabled the design of a calibration methodology which can reach a cloud radar calibration uncertainty of 0.3 dB based on the equipment used in the experiment. Among different sources of uncertainty, the two largest terms are due to signal-to-clutter ratio and radar-to-target alignment. The analysis revealed that our 20 m mast setup with an approximate alignment approach is preferred to the 10 m mast setup with the motor-driven alignment system. The calibration uncertainty associated with signal-to-clutter ratio of the former is ten times smaller than for the latter. Cloud radar calibration results are found to be repeatable when comparing results from a total of 18 independent tests. Once calibrated the cloud radar provides valid reflectivity values when sampling mid-tropospheric clouds. Thus we conclude that the method is repeatable and robust, and that the uncertainties are precisely characterized. The method can be implemented under different configurations as long as the proposed principles are respected. It could be extended to reference reflectors held by other lifting devices such as tethered balloons or unmanned aerial vehicles. [ABSTRACT FROM AUTHOR]

An algorithm for the detection of horizontal wind shear at low levels was developed. The algorithm makes use of data collected by all radars from the Application Radar à la Météorologie Infra-Synoptique (ARAMIS) operational network, in order to build a complete mosaic of wind shear over metropolitan France. The product provides an estimation of the maximum horizontal wind shear detected in the low levels, between 0 and 2 km AGL. Examination of the wind shear mosaic for different cases shows that the product is able to retrieve small-scale wind shear signatures that can be linked to either convergence lines ahead of convective cells, which are indicative of gust fronts, or strong convergence areas inside intense cells. A statistical evaluation of the wind shear mosaic was performed, by comparing horizontal wind shear observed inside the area defined by convective objects with wind gusts recorded along their trajectory by weather stations. A link between those different observations was clearly established. Therefore, the use of wind shear for wind gust prediction was tested in combination with other parameters: an estimation of the energetic potential of density currents, the cell surface with reflectivity over 51 dB Z, relative helicity, and cell propagation speed. Different wind gust warning rules were tested on 468 convection nowcasting objects (CONOs). The results clearly highlighted the benefits of using wind shear for wind gust estimation, and also demonstrated the improvement in forecasting skill when combining different parameters. The wind shear mosaic will be produced operationally before the end of 2013 and will be used to improve wind gust warnings provided to end users. [ABSTRACT FROM AUTHOR]

Cloud radars are capable of providing continuous high-resolution observations of the cloud. These observations are related to the microphysical properties of clouds. Power law relations in the form of Z = a · LWCb are generally used to estimate liquid water content (LWC) profiles. The constants a and b from the power-law relation vary with the cloud type and cloud characteristics. Due to the variety of such parameterizations, selecting the most appropriate Z-LWC relation for a continuous cloud system is complicated. Additional information such as Liquid water path (LWP) from a co-located microwave radiometer is used to scale the LWC of the cloud profile. An algorithm for estimating the LWC of warm clouds using radar-microwave radiometer synergy in a variational framework is presented. This method also accounts for attenuation due to cloud droplets and retrieves a suitable scaling factor (lna) of the profile in addition to the LWC. The optimal estimation techniques incorporate a priori information of desired variables, and the forward model converts these variables into observation parameters. In this algorithm formulation, the measure of uncertainty in observations, forward model and, a priori acts as weights in the retrieved quantities. These uncertainties in the retrieval are analyzed in the sensitivity analysis of the algorithm. The retrieval algorithm is first tested on a synthetic profile for different perturbations in sensitivity parameters. The sensitivity study has shown that this method is susceptible to LWP information. The algorithm is then implemented to various cloud and fog cases at SIRTA observatory to estimate LWC and the scaling factor. The scaling factor changes for each cloud profile, and the range of lna are consistent with suggested values in literature. The validation of such an algorithm is challenging, as we need reference measurements of LWC co-located with the retrieved values. During the SOFOG-3D campaign (South-West of France, October 2019 to March 2020), in-situ measurements of LWC were collected in the vicinity of a cloud radar and a microwave radiometer, allowing comparison of retrieved and measured LWC. The comparison demonstrated that the cloud-fog heterogeneity was playing a key role in the assessment. The proposed synergistic retrieval algorithm is applied to 39 cloud and fog cases at SIRTA, and the behavior of the scaling factor is studied. This statistical analysis of scaling is carried out to develop a radar-only retrieval method. The climatology revealed that the scaling factor can be linked to the maximum reflectivity of the profile. From climatology, the statistical relations for scaling factor are proposed for fog and cloud. Thanks to the variational framework, a stand-alone radar version of the algorithm is adapted from the synergistic retrieval algorithm, which incorporates the climatology of scaling factor as a priori information to estimate the LWC of warm cloud. [ABSTRACT FROM AUTHOR]

This paper presents an analysis of a hail event that occurred 27 May 2012 over Brignoles, located in southeastern France. The event was observed by an X-band polarimetric radar located in Mont Maurel, 75 km northeast of the hailstorm. Lightning data from the French national network (owned and operated by Météorage) are also used in the study. The analysis highlights that the lightning and radar data provide complementary information that may allow a better microphysical interpretation of the hailstorm and potentially increase the probability of its detection. [ABSTRACT FROM AUTHOR]

Copyright of Radioprotection (EDP Sciences) is the property of EDP Sciences and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Hydrological Sciences Journal/Journal des Sciences Hydrologiques is the property of Taylor & Francis Ltd and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

L- and P-band airborne polarimetric synthetic aperture radar (SAR) data acquired by the RAMSES system over different height maritime pine (Pinus Pinaster Ait.) stands of the Nezer forest (Landes, France) have been evaluated for forest biophysical parameter estimation. A pseudolinear correlation has been brought to evidence at P-band between polarimetric anisotropy and mean tree height, which is also linked to other biophysical parameters in the Nezer forest, meaning that SAR polarimetry constitutes a promising tool for forest parameter retrieval at low frequency. The spatial conditions have been evaluated through the quantification of the impact of signal-to-noise ratio diminution and resolution degradation on the forest height inversion. It has been shown that the inversion accuracy remains acceptable for N E σo, representing the noise level of the SAR image, which is lower than -- 15 dB, and for spatial resolution increasing up to 15 m. [ABSTRACT FROM AUTHOR]

The Bollène-2002 Experiment was aimed at developing the use of a radar volume-scanning strategy for conducting radar rainfall estimations in the mountainous regions of France. A developmental radar processing system, called Traitements Régionalisés et Adaptatifs de Données Radar pour l’Hydrologie (Regionalized and Adaptive Radar Data Processing for Hydrological Applications), has been built and several algorithms were specifically produced as part of this project. These algorithms include 1) a clutter identification technique based on the pulse-to-pulse variability of reflectivity Z for noncoherent radar, 2) a coupled procedure for determining a rain partition between convective and widespread rainfall R and the associated normalized vertical profiles of reflectivity, and 3) a method for calculating reflectivity at ground level from reflectivities measured aloft. Several radar processing strategies, including nonadaptive, time-adaptive, and space–time-adaptive variants, have been implemented to assess the performance of these new algorithms. Reference rainfall data were derived from a careful analysis of rain gauge datasets furnished by the Cévennes–Vivarais Mediterranean Hydrometeorological Observatory. The assessment criteria for five intense and long-lasting Mediterranean rain events have proven that good quantitative precipitation estimates can be obtained from radar data alone within 100-km range by using well-sited, well-maintained radar systems and sophisticated, physically based data-processing systems. The basic requirements entail performing accurate electronic calibration and stability verification, determining the radar detection domain, achieving efficient clutter elimination, and capturing the vertical structure(s) of reflectivity for the target event. Radar performance was shown to depend on type of rainfall, with better results obtained with deep convective rain systems (Nash coefficients of roughly 0.90 for point radar–rain gauge comparisons at the event time step), as opposed to shallow convective and frontal rain systems (Nash coefficients in the 0.6–0.8 range). In comparison with time-adaptive strategies, the space–time-adaptive strategy yields a very significant reduction in the radar–rain gauge bias while the level of scatter remains basically unchanged. Because the Z–R relationships have not been optimized in this study, results are attributed to an improved processing of spatial variations in the vertical profile of reflectivity. The two main recommendations for future work consist of adapting the rain separation method for radar network operations and documenting Z–R relationships conditional on rainfall type. [ABSTRACT FROM AUTHOR]

Copyright of Journal of Coastal Research is the property of KnowledgeWorks Global, Ltd and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Radar reflectivity (Zh), differential reflectivity (Zdr), and specific differential phase (Kdp) measured from the operational, polarimetric weather radar located in Trappes, France, were used to examine the effects of radar beam shielding on rainfall estimation. The objective of this study is to investigate the degree of immunity of Kdp-based rainfall estimates to beam shielding for C-band radar data during four typical rain events encountered in Europe. The rain events include two cold frontal rainbands with average rainfall rates of 7 and 17 mm h-1, respectively, and two summertime convective rain events with average rainfall rates of 11 and 22 mm h-1. The large effects of beam shielding on rainfall accumulation were observed for algorithms using Zh and Zdr with differences of up to ∼2 dB (40%) compared to a Kdp-based algorithm over a power loss range of 0–8 dB. This analysis reveals that Zdr and Kdp are not affected by partial beam shielding. Standard reflectivity corrections based on the degree of beam shielding would have overestimated rainfall rates by up to 1.5 dB for less than 40% beam shielding and up to 3 dB for beam shielding less than 75%. The investigation also examined the sensitivity of beam shielding effects on rainfall rate estimation to (i) axis–ratio parameterization and drop size distribution, (ii) methods used to smooth profiles of differential propagation phase (φdp) and estimate Kdp, and (iii) event-to-event variability. Although rainfall estimates were sensitive to drop size distribution and axis–ratio parameterization, differences between Zh- and Kdp-based rainfall rates increased independently from those parameters with amount of shielding. Different approaches to smoothing φdp profiles and estimating Kdp were examined and showed little impact on results. [ABSTRACT FROM AUTHOR]

A full radar simulator for high-resolution (1-5 km) nonhydrostatic models has been developed within the research nonhydrostatic mesoscale atmospheric (Meso-NH) model. This simulator is made up of building blocks, each of which describes a particular physical process (scattering, beam bending, etc.). For each of these blocks, several formulations have been implemented. For instance, the radar simulator offers the possibility to choose among Rayleigh, Rayleigh-Gans, Mie, or T-matrix scattering methods, and beam bending can be derived from an effective earth radius or can depend on the vertical gradient of the refractive index of air. Moreover, the radar simulator is fully consistent with the microphysical parameterizations used by the atmospheric numerical model. Sensitivity experiments were carried out using different configurations for the simulator. They permitted the specification of an observation operator for assimilation of radar reflectivities by high-resolution nonhydrostatic numerical weather prediction systems, as well as for their validation. A study of the flash flood of 8-9 September 2002 in southeastern France, which was well documented with volumetric data from an S-band radar, serves to illustrate the capabilities of the radar simulator as a validation tool for a mesoscale model. [ABSTRACT FROM AUTHOR]

On 11 August 1999, a near-total solar eclipse (80%) was observed in Campistrous, France. The influence of this particular event on the atmospheric boundary layer was observed with a UHF-RASS radar, a sodar and an instrumented mast. The changes in turbulence intensity, radar reflectivity, and temperature on the radiative budget are described in relation to collocated ground meteorological data. The impact of the eclipse induces a clear response of the atmosphere, with a time lag of 15 to 30 min, perceptible in several mean and turbulent meteorological variables up to the top of the atmospheric boundary layer. [ABSTRACT FROM AUTHOR]

This paper investigates to what extent soil moisture and vegetation density information can be extracted from the Advanced Scatterometer (ASCAT) satellite-derived radar backscatter (σ°) in a data assimilation context. The impact of independent estimates of the surface soil moisture (SSM) and leaf area index (LAI) of diverse vegetation types on ASCAT σ° observations is simulated over southwestern France using the water cloud model (WCM). The LAI and SSM variables used by the WCM are derived from satellite observations and from the Interactions between Soil, Biosphere, and Atmosphere (ISBA) land surface model, respectively. They permit the calibration of the four parameters of the WCM describing static soil and vegetation characteristics. A seasonal analysis of the model scores shows that the WCM has shortcomings over karstic areas and wheat croplands. In the studied area, the Klaus windstorm in January 2009 damaged a large fraction of the Landes forest. The ability of the WCM to represent the impact of Klaus and to simulate ASCAT σ° observations in contrasting land-cover conditions is explored. The difference in σ° observations between the forest zone affected by the storm and the bordering agricultural areas presents a marked seasonality before the storm. The difference is small in the springtime (from March to May) and large in the autumn (September to November) and wintertime (December to February). After the storm, hardly any seasonality was observed over four years. This study shows that the WCM is able to simulate this extreme event. It is concluded that the WCM could be used as an observation operator for the assimilation of ASCAT σ° observations into the ISBA land surface model. [ABSTRACT FROM AUTHOR]

Recent studies have highlighted the need for high resolution rainfall measurements for better modelling of urban and peri-urban catchment responses. In this work, we used a fully-distributed model called "Multi-Hydro" to study small-scale rainfall variability and its hydrological impacts. The catchment modelled is a semi-urban area located in the southwest region of Paris, an area that has been previously partially validated. At this time, we make some changes to the model, henceforth using its drainage system globally, and we investigate the influence of small-scale rainfall variability by modelling three rainfall events with two different rainfall data inputs: the C-band radar data provided by Météo-France at a 1 km × 1 km × 5 min resolution, and the new X-band radar (recently installed at Ecole des Ponts, France) data at a resolution of 250 m × 250 m × 3.41 min, thereby presenting the gains of better resolution (with the help of Universal Multifractals). Finally, we compare the Multi-Hydro hydrological results with those obtained using an operational semi-distributed model called "Optim Sim" over the same area to revalidate Multi-Hydro modelling, and discuss the model's limitations and the impacts of data quality and resolution, observing the difficulties associated with semi-distributed models when accounting the spatial variability of weather radar data. This work concludes that it may be useful in future to improve rainfall data acquisition, aiming for better spatio-temporal resolution (now achieved by the weather dual-polarized X-band radars) and data quality when considering small-scale rainfall variability, and to merge deterministic, fully-distributed and stochastic models into a hybrid model which would be capable of taking this small-scale rainfall variability into account. [ABSTRACT FROM AUTHOR]