Search

There is increasing focus on applying deep learning methods to electrocardiograms (ECGs), with recent studies showing that neural networks (NNs) can predict future heart failure or atrial fibrillation from the ECG alone. However, large numbers of ECGs are needed to train NNs, and many ECGs are currently only in paper format, which are not suitable for NN training. We developed a fully-automated online ECG digitisation tool to convert scanned paper ECGs into digital signals. Using automated horizontal and vertical anchor point detection, the algorithm automatically segments the ECG image into separate images for the 12 leads and a dynamical morphological algorithm is then applied to extract the signal of interest. We then validated the performance of the algorithm on 515 digital ECGs, of which 45 were printed, scanned and redigitised. The automated digitisation tool achieved 99.0% correlation between the digitised signals and the ground truth ECG (n = 515 standard 3-by-4 ECGs) after excluding ECGs with overlap of lead signals. Without exclusion, the performance of average correlation was from 90 to 97% across the leads on all 3-by-4 ECGs. There was a 97% correlation for 12-by-1 and 3-by-1 ECG formats after excluding ECGs with overlap of lead signals. Without exclusion, the average correlation of some leads in 12-by-1 ECGs was 60–70% and the average correlation of 3-by-1 ECGs achieved 80–90%. ECGs that were printed, scanned, and redigitised, our tool achieved 96% correlation with the original signals. We have developed and validated a fully-automated, user-friendly, online ECG digitisation tool. Unlike other available tools, this does not require any manual segmentation of ECG signals. Our tool can facilitate the rapid and automated digitisation of large repositories of paper ECGs to allow them to be used for deep learning projects. [ABSTRACT FROM AUTHOR]

In industry, the task of defect classification and defect localization is an important part of defect detection system. However, existing studies only focus on one task and it is difficult to ensure the accuracy of both tasks. This paper proposes a defect detection system based on improved Yolo_v4, which greatly improves the detection ability of minor defects. For K_Means algorithm clustering prianchors question with strong subjectivity, the paper proposes the Density Based Spatial Clustering of Applications with Noise (DBSCAN) algorithm to determine the number of Anchors. To solve the problem of low detection rate of small targets caused by insufficient reuse rate of low-level features in CSPDarknet53 feature extraction network, this paper proposes an ECA-DenseNet-BC-121 feature extraction network to improve it. And the Dual Channel Feature Enhancement (DCFE) module is proposed to improve the local information loss and gradient propagation obstruction caused by quad chain convolution in PANet networks to improve the robustness of the model. The experimental results on the fabric surface defect detection datasets show that the mAP of the improved Yolo_v4 is 98.97%, which is 7.67% higher than SSD, 3.75% higher than Faster_RCNN, 10.82% higher than Yolo_v4 tiny, and 5.35% higher than Yolo_v4, and the detection speed reaches 39.4 fps. It can meet the real-time monitoring needs of industrial sites. [ABSTRACT FROM AUTHOR]

Fruit recognition and location are the premises of robot automatic picking. YOLOv3 has been used to detect different fruits in complex environment. However, for the object with definite features, the complex network structure will increase the computing time and may cause overfitting. Therefore, this paper has carried out a lightweight design for the YOLOv3. This paper proposed an improved T-Net to detect tomato images. Firstly, the T-Net reduces the residual network layers. This paper changed the number of cycles in each group of the residual unit to 1, 2, 2, 1, and 1. Second, two feature layers with different scales are selected according to the features of tomatoes. Meanwhile, the convolutional layer at the neck has been reduced by two layers. Finally, the location and approximate diameter of the ripe tomato are obtained by combining the node information of the Intel D435i camera and T-Net in the Robot Operation System. T-Net obtains mean average precision (mAP) of 99.2%, F1-score of 98.9%, precision of 99.0%, and recall of 98.8% at a detection rate of 104.2 FPS. The proposed T-Net has outperformed the YOLOv3 with 0.4%, 0.1%, and 0.2% increase in precision, mAP, and F1-score. The detection speed of T-Net is 1.8 times faster than YOLOv3. The mean errors of the center coordinates and diameter of the tomato are 8.5 mm and 2.5 mm, respectively. This model provides a method for efficient real-time detection and location of tomatoes. [ABSTRACT FROM AUTHOR]

Because of the unique imaging mechanism of infrared (IR) sensors, IR images commonly suffer from blurred edge details, low contrast, and poor signal-to-noise ratio. A new method is proposed in this paper to enhance IR image details so that the enhanced images can effectively inhibit image noise and improve image contrast while enhancing image details. First, for the traditional guided image filter (GIF) applied to IR image enhancement is prone to halo artifacts, this paper proposes a detail enhancement guided filter (DGIF). It mainly adds the constructed edge perception and detail regulation factors to the cost function of the GIF. Then, according to the visual characteristics of human eyes, this paper applies the detail regulation factor to the detail layer enhancement, which solves the problem of amplifying image noise using fixed gain coefficient enhancement. Finally, the enhanced detail layer is directly fused with the base layer so that the enhanced image has rich detail information. We first compare the DGIF with four guided image filters and then compare the algorithm of this paper with three traditional IR image enhancement algorithms and two IR image enhancement algorithms based on the GIF on 20 IR images. The experimental results show that the DGIF has better edge-preserving and smoothing characteristics than the four guided image filters. The mean values of quantitative evaluation of information entropy, average gradient, edge intensity, figure definition, and root-mean-square contrast of the enhanced images, respectively, achieved about 0.23%, 3.4%, 4.3%, 2.1%, and 0.17% improvement over the optimal parameter. It shows that the algorithm in this paper can effectively suppress the image noise in the detail layer while enhancing the detail information, improving the image contrast, and having a better visual effect. [ABSTRACT FROM AUTHOR]

Recent research has focused on applying blockchain technology to solve security-related problems in Internet of Things (IoT) networks. However, the inherent scalability issues of blockchain technology become apparent in the presence of a vast number of IoT devices and the substantial data generated by these networks. Therefore, in this paper, we use a lightweight consensus algorithm to cater to these problems. We propose a scalable blockchain-based framework for managing IoT data, catering to a large number of devices. This framework utilizes the Delegated Proof of Stake (DPoS) consensus algorithm to ensure enhanced performance and efficiency in resource-constrained IoT networks. DPoS being a lightweight consensus algorithm leverages a selected number of elected delegates to validate and confirm transactions, thus mitigating the performance and efficiency degradation in the blockchain-based IoT networks. In this paper, we implemented an Interplanetary File System (IPFS) for distributed storage, and Docker to evaluate the network performance in terms of throughput, latency, and resource utilization. We divided our analysis into four parts: Latency, throughput, resource utilization, and file upload time and speed in distributed storage evaluation. Our empirical findings demonstrate that our framework exhibits low latency, measuring less than 0.976 ms. The proposed technique outperforms Proof of Stake (PoS), representing a state-of-the-art consensus technique. We also demonstrate that the proposed approach is useful in IoT applications where low latency or resource efficiency is required. [ABSTRACT FROM AUTHOR]

In order to address the challenges of identifying, detecting, and tracking moving objects in video surveillance, this paper emphasizes image-based dynamic entity detection. It delves into the complexities of numerous moving objects, dense targets, and intricate backgrounds. Leveraging the You Only Look Once (YOLOv3) algorithm framework, this paper proposes improvements in image segmentation and data filtering to address these challenges. These enhancements form a novel multi-object detection algorithm based on an improved YOLOv3 framework, specifically designed for video applications. Experimental validation demonstrates the feasibility of this algorithm, with success rates exceeding 60% for videos such as "jogging", "subway", "video 1", and "video 2". Notably, the detection success rates for "jogging" and "video 1" consistently surpass 80%, indicating outstanding detection performance. Although the accuracy slightly decreases for "Bolt" and "Walking2", success rates still hover around 70%. Comparative analysis with other algorithms reveals that this method's tracking accuracy surpasses that of particle filters, Discriminative Scale Space Tracker (DSST), and Scale Adaptive Multiple Features (SAMF) algorithms, with an accuracy of 0.822. This indicates superior overall performance in target tracking. Therefore, the improved YOLOv3-based multi-object detection and tracking algorithm demonstrates robust filtering and detection capabilities in noise-resistant experiments, making it highly suitable for various detection tasks in practical applications. It can address inherent limitations such as missed detections, false positives, and imprecise localization. These improvements significantly enhance the efficiency and accuracy of target detection, providing valuable insights for researchers in the field of object detection, tracking, and recognition in video surveillance. [ABSTRACT FROM AUTHOR]

Flocking cohesion is critical for maintaining a group's aggregation and integrity. Designing a potential function to maintain flocking cohesion unaffected by social distance is challenging due to the uncertainty of real-world conditions and environments that cause changes in agents' social distance. Previous flocking research based on potential functions has primarily focused on agents' same social distance and the attraction–repulsion of the potential function, ignoring another property affecting flocking cohesion: well depth, as well as the effect of changes in agents' social distance on well depth. This paper investigates the effect of potential function well depths and agent's social distances on the multi-agent flocking cohesion. Through the analysis, proofs, and classification of these potential functions, we have found that the potential function well depth is proportional to the flocking cohesion. Moreover, we observe that the potential function well depth varies with the agents' social distance changes. Therefore, we design a segmentation potential function and combine it with the flocking control algorithm in this paper. It enhances flocking cohesion significantly and has good robustness to ensure the flocking cohesion is unaffected by variations in the agents' social distance. Meanwhile, it reduces the time required for flocking formation. Subsequently, the Lyapunov theorem and the LaSalle invariance principle prove the stability and convergence of the proposed control algorithm. Finally, this paper adopts two subgroups with different potential function well depths and social distances to encounter for simulation verification. The corresponding simulation results demonstrate and verify the effectiveness of the flocking control algorithm. [ABSTRACT FROM AUTHOR]

This paper thoroughly explores the role of object detection in smart cities, specifically focusing on advancements in deep learning-based methods. Deep learning models gain popularity for their autonomous feature learning, surpassing traditional approaches. Despite progress, challenges remain, such as achieving high accuracy in urban scenes and meeting real-time requirements. The study aims to contribute by analyzing state-of-the-art deep learning algorithms, identifying accurate models for smart cities, and evaluating real-time performance using the Average Precision at Medium Intersection over Union (IoU) metric. The reported results showcase various algorithms' performance, with Dynamic Head (DyHead) emerging as the top scorer, excelling in accurately localizing and classifying objects. Its high precision and recall at medium IoU thresholds signify robustness. The paper suggests considering the mean Average Precision (mAP) metric for a comprehensive evaluation across IoU thresholds, if available. Despite this, DyHead stands out as the superior algorithm, particularly at medium IoU thresholds, making it suitable for precise object detection in smart city applications. The performance analysis using Average Precision at Medium IoU is reinforced by the Average Precision at Low IoU (APL), consistently depicting DyHead's superiority. These findings provide valuable insights for researchers and practitioners, guiding them toward employing DyHead for tasks prioritizing accurate object localization and classification in smart cities. Overall, the paper navigates through the complexities of object detection in urban environments, presenting DyHead as a leading solution with robust performance metrics. [ABSTRACT FROM AUTHOR]

Wireless sensor network (WSN) location is a significant research area. In complex environments like forests, inaccurate signal intensity ranging is a major challenge. To address this issue, this paper presents a reliable WSN distance measurement-positioning algorithm for forest environments. The algorithm divides the positioning area into several sub-regions based on the discrete coefficient of the collected signal strength. Then, using the fitting method based on the signal intensity value of each sub-region, the algorithm derives the reference points of the logarithmic distance path loss model and path loss index. Finally, the algorithm locates target nodes using anchor nodes in different regions. Additionally, to enhance the positioning accuracy, weight values are assigned to the positioning result based on the discrete coefficient of the signal intensity in each sub-region. Experimental results demonstrate that the proposed WSN algorithm has high precision in forest environments. [ABSTRACT FROM AUTHOR]

Unmanned Aerial Vehicles are useful tools for many applications. However, autonomous path planning for Unmanned Aerial Vehicles in unfamiliar environments is a challenging problem when facing a series of problems such as poor consistency, high influence by the native controller of the Unmanned Aerial Vehicles. In this paper, we investigate reinforcement learning-based autonomous local path planning methods for Unmanned Aerial Vehicles with high autonomous decision-making capability and locally high portability. We propose an autonomous local path planning algorithm based on the TD3 strategy to solve the problem of local obstacle avoidance and path planning in unfamiliar environments using autonomous decision-making of Unmanned Aerial Vehicles. The simulation results on Gazebo show that our method can effectively realize the autonomous local path planning task for Unmanned Aerial Vehicles, the success rate of path planning with our method can reach 93% under the interference of no obstacles, and 92% in the environment with obstacles. Finally, our method can be used for autonomous path planning of Unmanned Aerial Vehicles in unfamiliar environments. [ABSTRACT FROM AUTHOR]