Search

Worldwide manufacturing and service sectors are choosing to transform the existing manufacturing sector, particularly reconfigurable manufacturing systems using the technologies of the next generation Industry 4.0. In order to satisfy the demands of the fourth industrial revolution, model evaluation and assessing various candidate configurations in reconfigurable manufacturing systems was developed. The proposed model considers evolving consumer demands and evaluates manufacturing configurations using a gray relational approach. For the case at hand, it is evident that considering all possible dynamic market scenarios 1 to 6, the current manufacturing configuration, i.e., alternative 1, has 89% utilization, total 475 h of earliness and 185 h of lateness in the order demand delivery to the market, and a total of 248 throughput hours and around 1143 bottleneck hours. The main challenge is to make a perfect match between the market demands, variations in product geometry, manufacturing processes and several reconfiguration strategies/alternatives. Furthermore, it is evident that alternative 1 should be reconfigured and that alternative 3 is the best choice. Alternative 3 exhibits 86% system utilization, a total of 926 h of earliness and 521 h of lateness in the order demand delivery to the market, and a total of 127 throughput hours and around 853 bottleneck hours. A simulation framework is used to demonstrate the efficacy of each possible reconfigurable production setup. The sensitivity analysis is also carried out by adjusting the weights through principal component analysis and validating the acquired ranking order. Thus, if the decision makers want to provide a preference to all criteria, the order of the choices of configurations is found to be alternative 3, alternative 1, alternative 4, alternative 2 and alternative 5. [ABSTRACT FROM AUTHOR]

I Axioms i was able to uphold its high standards for published papers due to the outstanding efforts of our reviewers. [Extracted from the article]

Thanks to the efforts of our reviewers in 2022, the median time to first decision was 15 days and the median time to publication was 36 days. I Electronics i was able to uphold its high standards for published papers due to the outstanding efforts of our reviewers. Regardless of whether the articles they examined were ultimately published, the editors would like to express their appreciation and thank the following reviewers for the time and dedication that they have shown I Electronics i :e of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). [Extracted from the article]

I Symmetry i was able to uphold its high standards for published papers due to the outstanding efforts of our reviewers. [Extracted from the article]

This paper investigates tax competitiveness among the EU member countries. The tax competition of countries causes both positive and negative effects on macroeconomic processes such as the effectiveness of government spending, the rationality of supply of externalities, and the length and amplitudes of business cycles. A considerable reduction of corporate tax in the EU is related to increased tax competition after new members entered the EU. Multiple criteria methods were chosen for the quantitative evaluation of EU countries from different regions of the EU. Criteria of evaluation were chosen and structured into a hierarchy. The convergence process of the new members of the EU is reinforced with the increasing tax competitiveness of such countries. Results of the multiple criteria evaluation revealed both the factors that increased the tax competitiveness of new members of the EU, and outlined the factors that hampered such competition. [ABSTRACT FROM AUTHOR]

This paper reports a detailed analysis of the drain current modulation of a single-drain normal-gate n channel metal-oxide semiconductor field effect transistor (n-MOSFET) under an on-chip magnetic field. A single-drain n-MOSFET has been fabricated and placed in the center of a square-shaped metal loop which generates the on-chip magnetic field. The proposed device designed is much smaller in size with respect to the metal loop, which ensures that the generated magnetic field is approximately uniform. The change of drain current and change of bulk current per micron device width has been measured. The result shows that the difference drain current is about 145 µA for the maximum applied magnetic field. Such changes occur from the applied Lorentz force to push out the carriers from the channel. Based on the drain current difference, the change in effective mobility has been detected up to 4.227%. Furthermore, a detailed investigation reveals that the device behavior is quite different in subthreshold and saturation region. A change of 50.24 µA bulk current has also been measured. Finally, the device has been verified for use as a magnetic sensor with sensitivity 4.084% (29.6 T−1), which is very effective as compared to other previously reported works for a single device. [ABSTRACT FROM AUTHOR]

Multi-attribute decision-making (MADM) methods represent reliable ways to solve real-world problems for various applications by providing rational and logical solutions. In reaching such a goal, it is expected that MADM methods would eliminate inconsistencies like rank reversal issues in a given solution. In this paper, an endeavor is taken to put forward a new MADM method, called RAFSI (Ranking of Alternatives through Functional mapping of criterion sub-intervals into a Single Interval), which successfully eliminates the rank reversal problem. The developed RAFSI method has three major advantages that recommend it for further use: (i) its simple algorithm helps in solving complex real-world problems, (ii) RAFSI method has a new approach for data normalization, which transfers data from the starting decision-making matrix into any interval, suitable for making rational decisions, (iii) mathematical formulation of RAFSI method eliminates the rank reversal problem, which is one of the most significant shortcomings of existing MADM methods. A real-time case study that shows the advantages of RAFSI method is presented. Additional comprehensive analysis, including a comparison with other three traditional MADM methods that use different ways for data normalization and testing the resistance of RAFSI method and other MADM methods to rank the reversal problem, is also carried out. [ABSTRACT FROM AUTHOR]

This paper deals with the modeling and optimization of a bi-level multi-objective production planning problem, where some of the coefficients of objective functions and parameters of constraints are multi-choice. A general transformation technique based on a binary variable has been used to transform the multi-choices parameters of the problem into their equivalent deterministic form. Finally, two different types of secularization technique have been used to achieve the maximum degree of individually membership goals by minimizing their deviational variables and obtained the most satisfactory solution of the formulated problem. An illustrative real case study of production planning has been discussed and, also compared to validate the efficiency and usefulness of the proposed work. [ABSTRACT FROM AUTHOR]

Consumer preferences in sustaining and designing a product are a vital driver in a company's long-term strategy. In a supply chain management (SCM), realizing, configuring and analyzing consumer point of view and making sure the product is highly fitted to the consumer dimensions are essential responsibilities. For this purpose, a sustainable supply chain (SSC) can define a platform in order to reach consumer satisfaction. This paper examines the utility and factors related to the use of a phone in the market incorporating sustainable attributes. We firstly identify main factors and indicators that influence the selection of a sustainable phone. Thereafter, we propose decision analysis tools as decision-making trial and evaluation laboratory (DEMATEL) and analytical hierarchy process (AHP) for the realization of the cause, effect, and interrelation of the indicators. The comparisons between them report a high similarity while best and worst indicators are in the same positions. Best worst method (BWM) is then formulated in order to achieve optimal ranking and to express the importance. Counting on this information is of special relevance in marketing decision-making, where companies must look for competitive advantages prioritizing its product attributes, attending both to resources and to consumer preferences. For this project, we invited six experts in various areas (information science, consumer organizations, fair trade, public administration-cooperation office and telecommunication) to participate and fill the questionnaires. The results are analyzed by market experts in terms of comparison and conformity. [ABSTRACT FROM AUTHOR]

Blast-resistant buildings are mainly used to protect main instruments, controllers, expensive equipment, and people from explosion waves. Oil and gas industry projects almost always include blast-resistant buildings. For instance, based on a hazard identification (HAZID) and hazard and operability (HAZOP) analysis of a plant, control rooms and substations are sometimes designed to withstand an external free air explosion that generates blast over pressure. In this regard, a building façade is considered to be the first barrier of resistance against explosion waves, and therefore a building façade has an important role in reducing a building's vulnerability and human casualties. In case of a lack of enough resistance, explosion waves enter a building and bring about irreparable damage to the building. Consequently, it seems important to study and evaluate various materials used in a façade against the consequences of an explosion. This study tried to make a comparison between different types of building facades against explosion waves. The materials used in a building play a key role in the vulnerability of a building. In this research, a literature review and the fuzzy Delphi method were applied to find the most critical criteria, and then a fuzzy evaluation based on the distance from the average solution (EDAS) was applied in order to assess various materials used in building facades from the perspective of resiliency. A questionnaire was presented to measure effective indices in order to receive experts' ideas. Finally, by implementing this methodology in a case study, it was concluded that a stone façade performs much better against explosions. [ABSTRACT FROM AUTHOR]

Information management is a common paradigm in modern decision-making. A wide range of decision-making techniques have been proposed in the literature to model complex business processes. In this Special Issue, 16 selected and peer-reviewed original research articles contribute to business information management in various current real-world problems by proposing crisp or uncertain multiple-criteria decision-making (MCDM) models and techniques, mostly including multi-attribute decision-making (MADM) approaches in addition to a single paper proposing an interactive multi-objective decision-making (MODM) approach. The papers are mainly concentrated in three application areas: supplier selection and rational order allocation, the evaluation and selection of goods or facilities, and personnel selection/partner selection. A number of new approaches are proposed that are expected to attract great interest from the research community. [ABSTRACT FROM AUTHOR]

For a few years, there has been an increasing consciousness to design structures that are concurrently economic and environmentally responsive. Eco-friendly inferences of building designs include lower energy consumption, reduction in CO2 emissions, assimilated energy in buildings and enhancement of indoor air quality. With the aim of fulfilling design objectives, designers normally encounter a situation in which the selection of the most appropriate material from a set of various material alternatives is essential. Sustainability has been developing as a new concept in all human activities to create a better balance between social, environmental and economic issues. Designing materials based on the sustainability concept is a key step to enable a better balance because there is no need to re-structure phases and procedures to make the system more efficient in comparison to previous models. Some of the most commonly used materials are household furnishing materials, which can be electrical devices, kitchen gears or general furnishing materials. The volume of production and consumption of these materials is considerable, therefore a newer sustainable plan for a better designed system is justifiable. In the literature, the application of multi-attribute decision-making (MADM) methods has been found to be very suitable for evaluating materials and developing general plans for them. This study contributes by applying two approaches based on MADM methods for weighting the criteria related to the sustainable design of household furnishing materials. Step-Wise Weight Assessment Ratio Analysis (SWARA) and Best Worst Method (BWM) are two specialized and new methods for weighting criteria with different approaches. This paper has not only investigated the weighting of important and related criteria for sustainable design but has also evaluated the similarities and differences between the considered weighting methods. A comparative study of SWARA and BWM methods has never been conducted to date. The results show that, except pairwise comparisons, SWARA and BWM are certainly similar and in some cases SWARA can be more accurate and effective. [ABSTRACT FROM AUTHOR]