Search

In this study, a flexible capacitive pressure sensor based on filter paper substrate is proposed. The electric double layer (EDL) structure was constructed through the introduction of ionic liquid (IL), and the pressure-sensing was realized by using the change of ion-electron interface contact. The paper-based iontronic pressure sensor possesses a high sensitivity of 221.9 kPa−1, which is hundreds of times higher than that of the capacitive pressure sensors with conventional parallel plate structure, as well as an ultra-low detection limit of 2 Pa. The sensor exhibits an enormous application potential in healthcare wearable electronics and human-machine interface equipment. [ABSTRACT FROM AUTHOR]

This issue of IEEE Vehicular Technology Magazine includes our first invited paper. In the next issues, we plan to publish a series of invited papers on selected topics of high interest that should drive and become a reference for the community. The invited papers will provide a vision on the evolution, open challenges, and trends for technologies of high-expected impact. [ABSTRACT FROM AUTHOR]

Thermal aging and ultraviolet (UV) irradiation are used as methods to prepare samples of kraft paper spanning its full lifecycle within a high-voltage transformer, from new to end of life. The mechanical break strain is correlated with the degree of polymerization (DP), representing a progressive deterioration of mechanical properties during aging. Subsequent exposure to oil flow mimicking both normal plant operation and reclamation activities shows that aged paper exposed to high rates of flow experiences noticeable surface roughening. Despite this, no measurable erosion occurs even after long-term temperature/flow cycling in used mineral oil containing a notable particulate content. This indicates that kraft paper is unlikely to be eroded by normal reclamation activities, even in a severely aged asset. This confirms the validity of using this approach to extend plant life. [ABSTRACT FROM AUTHOR]

He is author of the books "Artificial Neural Networks for Modelling and Control of Non-linear Systems" (Springer) and "Least Squares Support Vector Machines" (World Scientific), co-author of the book "Cellular Neural Networks, Multi-Scroll Chaos and Synchronization" (World Scientific) and editor of the books "Nonlinear Modeling: Advanced Black-Box Techniques" (Springer), "Advances in Learning Theory: Methods, Models and Applications" (IOS Press) and "Regularization, Optimization, Kernels, and Support Vector Machines" (Chapman & Hall/CRC). [ABSTRACT FROM AUTHOR]

The long-term operation of dry-type transformer bushings at high temperatures can impact the performance of their primary insulation material. This article presents an experimental study of the effect of thermal aging time on electrical treeing in the epoxy resin-impregnated paper. The experimental results show that the electrical treeing pattern along the middle path of the electric field and the interlayer creepage along the average direction of the electric field are closely related to the aging time. Under the effect of thermal aging at 150 °C, the tree-starting voltage of epoxy resin-impregnated paper tends to increase and decrease as the aging time increases. An analysis and discussion of the test results in conjunction with scanning electron microscope (SEM) and energy dispersive spectroscopy (EDS) tests suggest that the destruction of the cross-linked network of the epoxy resin-impregnated paper at 150 °C is a fundamental reason for the significant decrease in the material’s tree-starting voltage and the change in electrical treeing morphology and interlayer creepage. Long-term operation at high temperatures can seriously impact the primary insulation performance of dry-type transformer bushings and requires attention. [ABSTRACT FROM AUTHOR]

The thermal index for thermally upgraded Kraft paper was determined for a series of five mineral insulating liquids and two natural esters using IEEE Standard C57.100 Annex A.4.2 and compared with the values in IEEE Standard C57.91. [ABSTRACT FROM AUTHOR]

In recent years, the establishment of a substantial amount of academic groups on scientific social network has brought new opportunities for the collaboration among researchers. In this situation, conducting paper recommendation to these academic groups is of terrific necessity in that it can further facilitate group activities. However, when producing group recommendation, existing methods fail to make full use of the abundant group information, from which a great deal of valuable information can be inferred to facilitate the recommendation performance. In addition, those methods tend to assign an equal weight to each group member when aggregating their recommendations, which is unreasonable in practice. Although some improvements have been made to remedy this problem by assigning different weights to group members, they fail to take into account the reliabilities of group members. Therefore, a group-oriented paper recommendation method based on probabilistic matrix factorization and evidential reasoning (GPMF_ER) is proposed in this article to tackle these problems. More specifically, the group and paper content information are integrated into the probabilistic matrix factorization model to enhance the accuracy of individual recommendation. Afterward, evidential reasoning rule is introduced in the aggregation step to consider both the weights and reliabilities of group members. Extensive experiments have been conducted on the real world CiteULike dataset and the results demonstrate the effectiveness of the proposed method. [ABSTRACT FROM AUTHOR]

Measuring the furan concentration in transformer oil is one of the most common methods of monitoring and evaluating insulation paper and estimating its degree of polymerization (DP). Here, methods for measuring furan concentration, especially ultraviolet-visible (UV-Vis) spectroscopy method, are reviewed on the old transformers oil. The results show that the excessive turbidity of old oils and noise at low wavelengths are the main disadvantages of this method, which reduce the measurements accuracy. The following solutions are proposed to overcome these disadvantages: 1) diluting insulation oil with hexane to reduce absorption intensity and 2) using average absorption at a given wavelength to reduce noise impact. These solutions are applied to the oil samples of ten old distribution transformer. It is observed that the correlation between 2-furaldehyde (2-FAL) concentration and average absorption intensity in 190–600 nm wavelength range is equal to ${R}^{{2}} =0.98$. A mathematical equation for calculating 2-FAL concentration based on average absorption is presented. It has been shown that to reduce the test time, a 190–400 nm range is the optimal measurement wavelength range. The results show that the average difference between the values of DP in the proposed method and the direct measurement method is equal to 77.5. [ABSTRACT FROM AUTHOR]

The total/partial oil change treatment can affect the furfural partitioning in oil-paper-pressboard insulation, resulting in poor accuracy of furfural analysis. Moreover, due to the high cost of total oil change, partial oil change is more practical during transformer operation. This paper investigates the furfural partitioning in the oil-paper-pressboard insulation under partial oil change conditions. First, the initial furfural partitioning equation with non-oil change is proposed based on the obtained furfural content in oil, paper, and pressboard. Then, the modified furfural partitioning model under partial oil change condition is established by introducing a correction factor. Moreover, a preliminary correction scheme for the furfural partitioning model considering the influence of moisture and acid is provided. Finally, furfural content in oil-Kraft paper and oil-thermally upgraded Kraft (TUK) paper insulation are discussed, and results indicate that the proposed modified furfural partitioning model is not suitable for the oil-TUK paper insulation. This work can provide theoretical support for furfural analysis of oil-immersed transformers. [ABSTRACT FROM AUTHOR]

Prospective authors are requested to submit new, unpublished manuscripts for inclusion in the upcoming event described in this call for papers. [ABSTRACT FROM AUTHOR]

Novel designs of paper-based bandstop frequency-selective surfaces (FSSs) are presented in this article. The characteristics of the paper-based honeycomb structure are investigated first. One folded dipole resonator with first-order bandstop response is analyzed and further printed on the sidewalls of the honeycomb structure accordingly. A second-order response with two cascade FSSs is proposed with controllable bandwidth by the coupling coefficient of the resonators with the aid of the equivalent circuit model. Two paper-based FSS samples were fabricated and measured to demonstrate the validity of the proposed design strategies. Benefiting from the merits of lightweight and strong mechanical properties, the proposed paper-based FSS is a potential candidate for application in radar systems and aircraft. [ABSTRACT FROM AUTHOR]

We report our recent progress in quantitative aging assessment of the oil-impregnated-paper (OIP) equipment (i.e., degree of polymerization, DP) by near infrared spectroscopy (NIRS). The NIRS database is built by incorporating 8 types of insulating paper and total 478 differently aged samples. We propose an improved PCA-RBF-NN model to address the nonlinear correlation between DP of insulating paper and spectra, and hence strengthening the prediction accuracy for field assessment. In the improved model, the principle component analysis (PCA) and the filtering layer are two essential procedures for eliminating the noises and unrelated information from the spectra. The field practices show that the improved PCA-RBF-NN model owns better performance than the classic PLS model and general RBF-NN model on the disassembled bushing (RMSE: 56 vs 109 vs 124) and transformer (RMSE: 50 vs 237 vs 244), respectively. The NIRS powered by the improved algorithm can provide a rapid solution to the aging condition assessment of the OIP power equipment in the field. [ABSTRACT FROM AUTHOR]

The ecological environment is increasingly damaged due to the impact of mineral oil extraction and leakage. As a kind of sustainable resource, a vegetable oil transformer has bright application prospects in future. However, the stability of vegetable oil has always been a problem to be solved. In addition, the metallic copper inside the transformer has a certain catalytic effect on the deterioration of vegetable oil. In this article, a copper–oil–paper insulation model is established. Based on the molecular dynamics simulation method, the catalytic mechanism of copper on the deterioration of oil-paper insulation is revealed from the microscopic level. Then, the effects of temperature, contact area, and oxygen on the catalytic effect of copper are discussed. The results show that copper could accelerate the decomposition of oil-paper insulation by attracting H atoms and O atoms in oil-paper. The increase in temperature accelerates the progress of the catalytic reaction and aggravates the deterioration of oil-paper insulation. The oxygen concentration has an important influence on the catalytic reaction of copper. As the oxygen concentration increases, the catalytic effect of copper is weakened. The abovementioned research could provide some theoretical reference for further exploration of effective oil-paper insulation deterioration protection technology. [ABSTRACT FROM AUTHOR]

Recently, evolutionary computation (EC) has experienced significant advancements due to the integration of machine learning, distributed computing, and big data technologies. These developments have led to new research avenues in EC, such as distributed EC and surrogate-assisted EC. While these advancements have greatly enhanced the performance and applicability of EC, they have also raised concerns regarding privacy leakages, specifically the disclosure of optimal results and surrogate models. Consequently, the combination of evolutionary computation and privacy protection becomes an increasing necessity. However, a comprehensive exploration of privacy concerns in evolutionary computation is currently lacking, particularly in terms of identifying the object, motivation, position, and method of privacy protection. To address this gap, this paper aims to discuss three typical optimization paradigms, namely, centralized optimization, distributed optimization, and data-driven optimization, to characterize optimization modes of evolutionary computation and proposes BOOM (i.e., oBject, mOtivation, pOsition, and Method) to sort out privacy concerns related to evolutionary computation. In particular, the centralized optimization paradigm allows clients to outsource optimization problems to a centralized server and obtain optimization solutions from the server. The distributed optimization paradigm exploits the storage and computational power of distributed devices to solve optimization problems. On the other hand, the data-driven optimization paradigm utilizes historical data to address optimization problems without explicit objective functions. Within each of these paradigms, BOOM is used to characterize the object and motivation of privacy protection. Furthermore, this paper discuss the potential privacy-preserving technologies that strike a balance between optimization performance and privacy guarantees. Finally, this paper outlines several new research directions for privacy-preserving evolutionary computation. [ABSTRACT FROM AUTHOR]

The generation and distribution of furfural are significantly affected by moisture content in the insulating paper. However, the diffusion mechanism of furfural under moisture effect is not clear, hence, this study investigates the effect of moisture on the diffusion characteristics of furfural by combining macro experiment and micro molecular dynamics simulation. The simulation results demonstrate that the increased moisture content in paper accelerates the diffusion of furfural from paper to oil, which is also proved by the experimental data. Then, the results of interaction energy analysis indicate that the increase of moisture enhances the van der Waals force between oil and furfural. The present findings are expected to improve the theoretical level of furfural analysis, which will facilitate the aging evaluation of the transformer insulating paper based on furfural. [ABSTRACT FROM AUTHOR]

The space charge effect of transformer insulating paper will distort its internal electric field, and its space charge effect will be more prominent under extremely complex working conditions. At present, the micromechanism of charge transport and electric field distortion characteristics of paperboard are not clear under complex working conditions. So in this article, based on the bipolar carrier transport (BCT) model and the dynamic carrier balance model, the effects of high temperature, aging degree, moisture content, and bent degree on charges accumulation in paperboard are studied under dc high voltage by numerical simulation and the measured data needed for simulation. The results show that the higher temperature strengthens the carrier migration, deepens the injection depth of the charge, and aggravates the distortion of electric field intensity in paperboard. The more extended the aging time of paperboard, the greater the internal trap density and the deeper the trap depth, which lead to charges migration difficultly. Increasing water content in the paperboard will accelerate space charges to reach a steady state, while further increasing it will slow down this process, which is related to the shallow trap getting deeper. When the critical part of paperboard is extruded, many traps are introduced, resulting in charges accumulation seriously. The research results can reference the design of paperboard and the maintenance of transformer insulation system. [ABSTRACT FROM AUTHOR]

Although the circulating flow of insulating oil can enhance heat dissipation in converter transformers, it can also influence the space charge distribution in oil–paper composite insulation. In this article, the oil–paper composite insulation between flat electrodes was used as the experimental model. Based on the pulsed electroacoustic (PEA) method, we investigated the effect of uncharged flowing oil on the space charge distribution in composite insulation under a dc electric field and polarity reversal. Under a dc electric field, as the oil flow velocity increased, the amount of interface charge between the oil and paper first increased and then decreased. During the polarity reversal process, the field distortion was aggravated at slower oil flows. These experimental results were explained in terms of the effect of oil flow on ionized charges in the oil. [ABSTRACT FROM AUTHOR]

Due to rapid temperature rise and insulation moisture, bubbles can generate in the oil-paper insulation of oil-immersed power transformers, which can reduce the dielectric strength of oil-paper insulation and even bring about the risk of insulation breakdown. In order to accurately evaluate the conditions of bubble formation, the physical process of bubble formation in oil-paper insulation is studied in this article. Considering the effects of water vaporization, gas dissolution in oil, and moisture migration on bubble formation, a bubble formation prediction model is constructed. Based on Henry’s law, the dissolution equilibrium of gas in oil is taken into consideration and the upper boundary of the initial temperature of bubble effect (ITBE) envelope is obtained in this model. Based on the moisture equilibrium in oil-paper insulation, the bubble formation process caused by the emergence and rapid evaporation of free water is analyzed, and then, the lower boundary of the ITBE envelope is obtained in this model. The model results show that the moisture content of the pressboard and the presence of free water have a great impact on ITBE. Specifically, the higher the moisture content, the lower the ITBE value. In addition, with the further increase of moisture content, the upper and lower boundaries of the ITBE envelope gradually tend to be the same. However, once free water is present on the surface of cellulose, ITBE decreases rapidly to below 120 °C. The model built in this article is of great significance to study the temperature limit of the power transformer. Hence the ITBE envelope can provide an important theoretical reference for reducing the risk of bubble formation during power transformer operation. [ABSTRACT FROM AUTHOR]

Healthy sleep is an important indicator of good physical and mental health. The current technology employed for monitoring sleep quality is typically expensive and invasive, which demands innovations in respiration monitoring. In addition, recent effort in developing wearable respiration sensors has faced great challenges in concurrently obtaining low cost, high stretchability, and high sensitivity. Herein, we demonstrate a simple fabrication strategy to construct low-cost, stretchable, skin-breathable and ultrasensitive respiration sensors using pencil drawing, electrode pasting, and laser cutting methods. With smart designs, the sensors exhibited high sensitivity, good stability, decent skin-breathability and capability to detect respiration rate and depth in real-time. The sensors fabricated by the simple low-cost method in this study can be utilized to measure sleep quality, providing warning signals for apnea and sleep disorders. The proposed technology holds promise for developing cost-effective wearable ultrasensitive sensors for sleep quality monitoring. [ABSTRACT FROM AUTHOR]