Search

Communication establishment is crucial for rescue operations in disaster affected areas. A standard tool for communication is the use of cell phones. However, they can be useless in situations where the cellular network's base stations are damaged in a disaster. A contemporary approach to re-establishing a communication network is by hosting base stations in drones. However, low battery life and difficulty in calculating the number of drones needed in different terrains are limitations of the above approach. This paper introduces a novel terrain-aware algorithm that calculates the minimum number of drones needed to cover an area with no voids in the network coverage. Our method ensures that the drones are deployed at optimal heights to maximize the average leftover energy in the network. We apply the algorithm for an actual location in Pettimudi, India and find the optimal number and positions of the drones to cover the area effectively without voids. In addition, we provide a simulation of the the communication establishment using above drones, and our experiments yield an average network efficiency of 98%, showing the effectiveness of our method. [ABSTRACT FROM AUTHOR]

The rapid growth of electric vehicles in India necessitates more power to energize such vehicles. Furthermore, the transport industry emits greenhouse gases, particularly SO2, CO2. The national grid has to supply an enormous amount of power on a daily basis due to the surplus power required to charge these electric vehicles. This paper presents the various hybrid energy system configurations to meet the power requirements of the electric vehicle charging station (EVCS) situated in the northwest region of Delhi, India. The three configurations are: (a) solar photovoltaic/diesel generator/battery-based EVCS, (b) solar photovoltaic/battery-based EVCS, and (c) grid-and-solar photovoltaic-based EVCS. The meta-heuristic techniques are implemented to analyze the technological, financial, and environmental feasibility of the three possible configurations. The optimization algorithm intends to reduce the total net present cost and levelized cost of energy while keeping the value of lack of power supply probability within limits. To confirm the solution quality obtained using modified salp swarm algorithm (MSSA), the popularly used HOMER software, salp swarm algorithm (SSA), and the gray wolf optimization are applied to the same problem, and their outcomes are equated to those attained by the MSSA. MSSA exhibits superior accuracy and robustness based on simulation outcomes. The MSSA performs much better in terms of computation time followed by the SSA and gray wolf optimization. MSSA results in reduced levelized cost of energy values in all three configurations, i.e., USD 0.482/kWh, USD 0.684/kWh, and USD 0.119/kWh in configurations 1, 2, and 3, respectively. Our findings will be useful for researchers in determining the best method for the sizing of energy system components. [ABSTRACT FROM AUTHOR]

Monitoring the Earth's surface and objects is important for many applications, such as managing natural resources, crop yield predictions, and natural hazard analysis. Remote sensing is one of the most efficient and cost-effective solutions for analyzing land-use and land-cover (LULC) changes over the Earth's surface through advanced computer algorithms, such as classification and change detection. In the past literature, various developments were made to change detection algorithms to detect LULC multitemporal changes using optical or microwave imagery. The optical-based hyperspectral highlights the critical information, but sometimes it is difficult to analyze the dataset due to the presence of atmospheric distortion, radiometric errors, and misregistration. In this work, an artificial neural network-based post-classification comparison (ANPC) as change detection has been utilized to detect the muti-temporal LULC changes over a part of Uttar Pradesh, India, using the Hyperion EO-1 dataset. The experimental outcomes confirmed the effectiveness of ANPC (92.6%) as compared to the existing models, such as a spectral angle mapper (SAM) based post-classification comparison (SAMPC) (89.7%) and k-nearest neighbor (KNN) based post-classification comparison (KNNPC) (91.2%). The study will be beneficial in extracting critical information about the Earth's surface, analysis of crop diseases, crop diversity, agriculture, weather forecasting, and forest monitoring. [ABSTRACT FROM AUTHOR]

Penetration level of solar photovoltaic (PV) energy in the utility network is steadily increasing. This changes the fault level and causes protection problems. Furthermore, multi-tapped structure of distribution network deployed to integrate solar PV energy to the grid and supplying loads at the same time also raised the protection challenges. Hence, this manuscript is aimed at introducing an algorithm to identify and classify the faults incident on the network of utilities where penetration level of the solar PV energy is high. This fault recognition algorithm is implemented in four steps: (1) calculation of Stockwell transform-based fault index (STFI) (2) calculation of Wigner distribution function-based fault index (WDFI) (3) calculation of combined fault index (CFI) by multiplying STFI and WDFI (4) calculation of index for ground fault (IGF) used to recognize the involvement of ground in a fault event. The STFI has the merits that its performance is least affected by the noise associated with the current signals and it is effective in identification of the waveform distortions. The WDFI employs energy density of the current signals for estimation of the faults and takes care of the current magnitude. Hence, CFI has the merit that it considers the current magnitude as well as waveform distortion for recognition of the faults. The classification of faults is achieved using the number of faulty phases. An index for ground fault (IGF) based on currents of zero sequence is proposed to classify the two phase faults with and without the ground engagement. Investigated faults include phase to ground, two phases fault without involving ground, two phases fault involving ground and three phase fault. Fault recognition algorithm is tested for fault recognition with the presence of noise, various angles of fault incidence, different impedances involved during faulty event, hybrid lines consisting of overhead line (OHL) and underground cable (UGC) sections, and location of faults on all nodes of the test grid. Fault recognition algorithm is also tested to discriminate the transients due to switching operations of feeders, loads and capacitor banks from the faulty transients. Performance of the fault recognition algorithm is compared with the algorithms based on discrete wavelet transform (DWT), Stockwell transform (ST) and hybrid combination of alienation coefficient and Wigner distribution function (WDF). Effectiveness of the fault recognition algorithm is established using a detailed study on the IEEE-13 nodes test feeder modified to incorporate solar PV plant of capacity 1 MW in MATLAB/Simulink. Algorithm is also validated on practical utility grid of Rajasthan State of India. [ABSTRACT FROM AUTHOR]