Search

We present a mathematical model for the slow combustion (smoldering) of a two-dimensional sheet of paper. We describe the evolution of the char region, and we investigate the effects of an orthogonal air flow on the shape of the combustion front. The mathematical formulation consists in a set of two nonlinear PDEs for the temperature and the oxygen concentrations coupled with one ODE for the cellulose concentration. The (dimensionless) problem is solved numerically by means of a spectral collocation scheme based on Chebyshev polynomials. Our results show that the Péclet and the Lewis number strongly influence the shape of the ignition front and that the advancement of the combustion front does not occur if advection and diffusion are neglected (zero Péclet and Lewis numbers). In particular we observe that the burning region and the ignition front are strongly influenced by the velocity of the airflow and by the mass and heat transport phenomena due to diffusion and advection. We shall see that the increasing of the ratio between the convective and diffusive characteristic times (Péclet number) and the decreasing of the ratio between the mass and heat diffusive characteristic times (Lewis number) have a "flattening effect" on the combustion front. [ABSTRACT FROM AUTHOR]

The article deals with the problem of calculating the volume calendar plan of a paper mill. The presented mathematical model and methods make it possible to schedule paper production orders between several paper machines (PM) to even their loading, devise cutting plans for each winder and arrange the order of their implementation. When forming cutting plans, orders are grouped in accordance with such parameters as grammage, roll diameter, core diameter, product type and number of layers. Deadlines and volumes in customer orders are taken into account. The cutting plans for each winder account for the allowable roll width limits and the maximum number of knives. To find the optimal schedule, a combination of the following criteria is used: minimal trim loss, minimal changes to the knives' setup and smooth transitions by product grades. Solution algorithms are presented that use a combination of the simplex method, the column generation, the branch and bound methods, the greedy algorithm and the local search procedure. We tested the solution approach on real production data from a paper mill in European Russia and obtained the production sequence that better matches deadlines in customer orders compared to the plan devised manually by production planners. [ABSTRACT FROM AUTHOR]

The selective maintenance problem (SMP) arises in many mission-oriented multi-component systems that are operated for consecutive missions interspersed with finite breaks, during which only limited component repairs can be performed due to constrained resources. This NP-hard problem decides which components to maintain and to what levels of repair to guarantee a pre-specified performance level during the subsequent mission. Over the last two decades, a sizeable body of literature has been published on this topic. However, the contributions have stagnated in quality, and most articles deal with small to moderate problems. This paper provides a critical review of the SMP literature. A total of 136 research articles related to SMP are reviewed and a selection of key representative models is discussed in detail. This review is framed according to two feature categories: formulation characteristics, composed of three sub-groups of characteristics related to the system, maintenance and mathematical model characteristics; and solution approaches, grouped by exact methods and approximate algorithms. This critical review is aimed at identifying drawbacks, shortcomings, and blind spots of the SMP literature, and providing a roadmap for the challenges to be addressed and innovative future research topics to further advance the academic and industrial contributions of SMP. [ABSTRACT FROM AUTHOR]

In this article, we present a mathematical model and numerical simulation of the coffee-ring effect on porous papers. The numerical method is based on Monte Carlo simulation. The proposed model is simple but can capture the main mechanism of coffee stain formation on porous papers. Several numerical experiments are presented to demonstrate the performance of the proposed algorithm. We can obtain the coffee-ring effect on porous papers as the computer simulation results. [ABSTRACT FROM AUTHOR]

Mathematical modeling is a high-leverage topic; it is critical to students' participation in STEM education and supports civic engagement. Until recently, research on modeling at the elementary level has been underemphasized, particularly research on supports and challenges for teachers who engage in designing authentic modeling tasks. In this study, we employed qualitative case study methods to investigate how elementary teachers designed and implemented authentic mathematical modeling tasks, with an explicit focus on how their tasks evidenced different dimensions of authenticity. We analyzed three cases of teams of elementary teachers as they developed modeling tasks connected to school and community contexts. The three cases were: 1) a student-driven modeling task related to paper and plastic waste in a school cafeteria, 2) a modeling task based on authentic situations at a community-run resource center, and 3) a modeling task focused on designing and monitoring a school community-building art project. Our cases illustrate that elementary teachers can successfully design and implement modeling activities that utilize different entry points and evidence multiple dimensions of authenticity. Furthermore, we found that the specific dimensions of authenticity may vary depending on the design supports and curriculum challenges within each context. [ABSTRACT FROM AUTHOR]

I will briefly discuss the history of research-related projects that Mark Burgin and I worked on together. I will then discuss our joint research related to the circle of sense and nonsense. One paper was entitled In a search for deeper meanings: navigating the circle of Sense and Nonsense and in turn articulating logical varieties as knowledge illuminators and the second was entitled In the Circle of Sense and Nonsense, Including A Mathematic Model of Meaning. This research represents a bridge between the media arts and sciences (my artwork) as a means of embodying ideas exploring a particular approach to meaning production and related computation, as well as Burgin's concepts related to logical varieties and mathematical models of meaning. I will refer to the full papers and links because they present a very robust and full articulation of the concepts discussed here. In this paper, I will briefly touch on the areas of research, supply short definitions, and refer to the relevant historical publications. [ABSTRACT FROM AUTHOR]

Ultrasound hip screening is suitable for the early identification of developmental dysplasia of the hip (DDH). Newborn and infant home visits are good opportunities for hip screening in the community, but studies focusing on nurse-led screenings are lacking. Based on a pre–post design, this study aims to develop and evaluate an ultrasound training program to improve nurses' assessment skills in detecting DDH cases during newborn and infant home visits. Said educational program will include e-learning, hands-on seminars, and clinical training. The primary outcome will be the success rate of imaging standard planes (standardized images for hip assessment) in clinical training. The secondary outcomes will include knowledge test results, objective structured clinical examination scores, time required for imaging, and inter-rater reliability between nurses and physicians. The educational program will address the issue of missed and late detection of DDH cases in resource-limited communities. This study will demonstrate the feasibility of procedures and the effectiveness of the educational program in 2024. The protocol was registered in the University Hospital Medical Information Network Clinical Trial Registry before starting the study (no. UMIN000051929, 16 August 2023). [ABSTRACT FROM AUTHOR]

Online ride-hailing services provide additional transportation capability by recruiting private vehicles to meet people's growing travel demand. To ensure the profitability of drivers and platforms, pick-up efficiency and frequency must be maintained at high levels. Therefore, consistency between the spatial distribution of drivers and that of travel demand becomes a key issue to address. This paper proposes a prediction-based iterative Kuhn-Munkres approach for service vehicle reallocation in the context of large-scale online ride-hailing. Firstly, preliminaries are formally defined and a novel mathematical model for the problem is proposed. Secondly, a deep spatio-temporal residual perception network is designed to accurately predict travel demand. Thirdly, an iterative Kuhn-Munkres approach combined with an improved A-Star algorithm is developed to reallocate service vehicles to spatial locations according to their distinct travel demand densities. Finally, extensive experiments are conducted to evaluate and verify the performance of the proposed approach. [ABSTRACT FROM AUTHOR]

This paper reflects on the paradigmatic assumptions and ideologies that have shaped algorithmic management research. We identify two sets of assumptions: one about the "ontology of algorithms" (which holds that human resource management [HRM] algorithms are non‐human entities with material agency) and one about the "ontology of management" that HRM algorithms afford (which understands algorithmic management as a form of control for maximizing economic/shareholder value). We explain how these core assumptions underpin existing research of HRM algorithms, causing blind spots that hinder new ways of understanding and studying algorithmic management. After identifying and unpacking the assumptions and blind spots, we offer avenues to overcome these blind spots, allowing for future research based on new ideological assumption grounds that will help move algorithmic management scholarship further in significant ways. [ABSTRACT FROM AUTHOR]

Aim: To describe the implementation of a trauma‐informed model of care in the Post COVID Respiratory Clinic of a large tertiary referral centre in NSW. Design: Discussion paper. Data Sources: Evidence gathered from a literature search (2008–2022) was used to develop a framework for management of patients presenting to this Post COVID Respiratory Clinic. This paper outlines the personal reflections of the clinic staff as they developed and implemented this framework. Ethical approval was obtained to report the data collected from patient reviews. Discussion: The literature highlights the high prevalence of trauma in patients following COVID‐19 infection, as well as the larger population both during and after the pandemic. This experience of trauma was observed in patients seen within the clinic, indicating a need for specialized care. In response, a trauma‐informed model of care was implemented. Conclusion: Reconceptualizing COVID‐19 as a 'collective trauma' can help healthcare workers understand the needs of post‐COVID patients and enable them to respond empathetically. A trauma‐informed model is complementary to this cohort as it specifically addresses vulnerable populations, many of whom have been further marginalized by the pandemic. Implications for Nursing and Patient Care: Frontline healthcare workers, particularly nurses, are well positioned to implement trauma‐informed care due to their high‐level of patient contact. Adequate allocation of resources and investment in staff is essential to ensure such care can be provided. Impact: The COVID‐19 pandemic has led to adverse physical and mental health outcomes for many.Trauma‐informed care is a way to promote reengagement with the healthcare system in this group.Post COVID patients globally may benefit from this approach, as it aims to build trust and independence. Patient or Public Contribution: Feedback was sought from a patient representative to ensure this paper adequately reflected the experience of the post‐COVID patient. [ABSTRACT FROM AUTHOR]

This paper reviews current numerical developments for atmospheric modelling. Numerical atmospheric modelling now looks back to a history of about 70 years after the first successful numerical prediction. Currently, we face new challenges, such as variable and adaptive resolution and ultra-highly resolving global models of 1 km grid length. Large eddy simulation (LES), special applications like the numerical prediction of pollution and atmospheric contaminants belong to the current challenges of numerical developments. While pollution prediction is a standard part of numerical modelling in case of accidents, models currently being developed aim at modelling pollution at all scales from the global to the micro scale. The methods discussed in this paper are spectral elements and other versions of Local-Galerkin (L-Galerkin) methods. Classic numerical methods are also included in the presentation. For example, the rather popular second-order Arakawa C-grid method can be shown to result as a special case of an L-Galerkin method using low-order basis functions. Therefore, developments for Galerkin methods also apply to this classic C-grid method, and this is included in this paper. The new generation of highly parallel computers requires new numerical methods, as some of the classic methods are not well suited for a high degree of parallel computing. It will be shown that some numerical inaccuracies need to be resolved and this indicates a potential for improved results by going to a new generation of numerical methods. The methods considered here are mostly derived from basis functions. Such methods are known under the names of Galerkin, spectral, spectral element, finite element or L-Galerkin methods. Some of these new methods are already used in realistic models. The spectral method, though highly used in the 1990s, is currently replaced by the mentioned local L-Galerkin methods. All methods presented in this review have been tested in idealized numerical situations, the so-called toy models. Waypoints on the way to realistic models and their mathematical problems will be pointed out. Practical problems of informatics will be highlighted. Numerical error traps of some current numerical approaches will be pointed out. These are errors not occurring with highly idealized toy models. Such errors appear when the test situation becomes more realistic. For example, many tests are for regular resolution and results can become worse when the grid becomes irregular. On the sphere no regular grids exist, except for the five derived from Platonic solids. Practical problems beyond mathematics on the way to realistic applications will also be considered. A rather interesting and convenient development is the general availability of computer power. For example, the computational power available on a normal personal computer is comparable to that of a supercomputer in 2005. This means that interesting developments, such as the small sphere atmosphere with a resolution of 1 km and a spherical circumference between 180 and 360 km are available to the normal owner of a personal computer (PC). Besides the mathematical problems of new approaches, we will also consider the informatics challenges of using the new generation of models on mainframe computers and PCs. [ABSTRACT FROM AUTHOR]

Background Following years of sustained pressure on the UK health service, there is recognition amongst health professionals and stakeholders that current models of healthcare are likely to be inadequate going forward. Therefore, a fundamental review of existing social models of healthcare is needed to ascertain current thinking in this area, and whether there is a need to change perspective on current thinking. Method Through a systematic research review, this paper seeks to address how previous literature has conceptualized a social model of healthcare and, how implementation of the models has been evaluated. Analysis and data were extracted from 222 publications and explored the country of origin, methodological approach, and the health and social care contexts which they were set. Results The publications predominantly drawn from the USA, UK, Australia, Canada and Europe identified five themes namely: the lack of a clear and unified definition of a social model of health and wellbeing; the need to understand context; the need for cultural change; improved integration and collaboration towards a holistic and person-centred approach; measuring and evaluating the performance of a social model of health. Conclusion The review identified a need for a clear definition of a social model of health and wellbeing. Furthermore, consideration is needed on how a model integrates with current models and whether it will act as a descriptive framework or, will be developed into an operational model. The review highlights the importance of engagement with users and partner organizations in the co-creation of a model of healthcare. [ABSTRACT FROM AUTHOR]

Back in 1974, DeGroot first introduced the concept of achieving consensus through iterative averaging processes using square stochastic matrices. A pivotal question arises regarding the feasibility of extending the classical DeGroot model from square stochastic matrices to higher-order stochastic hyper-matrices. In the paper, we introduce a novel mathematical model for opinion-sharing dynamics employing the Krause mean process that is generated by off-diagonally positive doubly stochastic hyper-matrices. The principal objective is to achieve consensus within the multi-agent system. [ABSTRACT FROM AUTHOR]

Industrial progress in papermaking in the early nineteenth century led to the technologies that resulted in more acidic papers, which was caused mainly by the exploitation of alum (KAl(SO4)2) and rosin as sizing agents. The papers prepared by such technologies have degraded more quickly. From the 1930s various deacidification and preservation processes with basic agents have been developed. The most widespread deacidification process is with the aerosol (spray system) consisting of microscale particles MgO and perfluoroheptane (PFH) as a carrier (the so-called Bookkeeper process). The shortcomings of this process are the low dissolution of solid MgO particles and the transport to the interior of acidic paper. We have developed a theoretical two-level model of the Bookkeeper process suitable for prediction of deacidification extent. The model involves both the dissolution/reaction of the solid particles and transport of solvated ions and solid particles inside the bulk of paper. The developed model coincides with the results of the performed deacidification experiment. The model is also in good agreement with the Lucas–Washburn equation, which is usually used for the description of the penetration of a deacidifying agent into the paper. [ABSTRACT FROM AUTHOR]

To enhance the quality and efficiency of computer-enabled generation of papers for Test for English Majors Band 8 (TEM-8), a paper generation model supported by sparrow search algorithm-genetic algorithm was studied. First, a simplified test paper generation mathematical model was set up after analyzing and studying types and characteristics of TEM-8 tasks. In the model, quantity, type, difficulty, discrimination degree, scores, exposure, and answering time of test questions were taken into consideration. To enhance the optimizing effect of the genetic algorithm for searching test questions, the traditional genetic algorithm was improved by introducing the sparrow search algorithm into the model to achieve a better crossover rate, variance rate, optimization precision, and speed of the genetic algorithm. A new sparrow search-genetic algorithm (SSA-GA) was designed, and the optimizing effect of SSA-GA was verified to be ideal through optimizing six standard test functions. Then, SSA-GA was applied to conduct experimentation with test paper generation, and comparison with traditional genetic algorithms was also made. The values of best and average fitness of SSA-GA were better than those of the traditional genetic algorithm (GA) in the paper generation. Exposure rate and success rate in TEM-8 paper generation of SSA-GA were higher than those of traditional GA in TEM-8 paper generation. Results showed that the studied SSA-GA could implement test paper generation with higher speed and better quality. [ABSTRACT FROM AUTHOR]

Copyright of Canadian Journal of Art Therapy is the property of Routledge and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The quest for cost-effective and thermal efficient structural materials onto beating the high cost of construction is gaining more attention among researchers. This study focused on the blending of cement and sand with waste paper pulp into cost-effective structural materials. The composites were prepared in four mix groups with each containing a fixed amount of sand at 5, 10, 15, and 20 wt.% (by weight of pulp). Cement was varied at 10, 20, 30, and 40 wt.% in each group, and curing was done for 28 days. Properties evaluated are compressive, bending, and splitting strengths. It was observed that increasing cement and sand contents enhanced strengths; howbeit, the blend of 30 wt.% cement/15 wt.% sand resulted in a reduction in bending strength even as 30 wt.% cement/20 wt.% sand engendered a decrease in bending and splitting strength. The microstructural features showed that inherent fibers of the pulp were well bonded with hydration products and sand content yielding good performance in the composites. The optimization procedure carried out depicted a combination of 35.27% cement and 20% sand as the optimum composition. Experimental outcomes were modelled for the purpose of prediction of responses. The models were confirmed statistically fit showing how varying cement content affected strength responses at fixed sand proportion. ANOVA affirmed the significant contribution of cement and sand on the strength responses. Compliance reliability was observed to be dependent on the interactive pattern between cement and sand. Going by the standard prescription for the strength properties, cement and sand content of 35.27 and sand 20 wt.% satisfied all strength requirements for low-cost construction having a compliance reliability of 1.31. [ABSTRACT FROM AUTHOR]

This paper undertakes a revisit of the sunk cost fallacy, which refers to the tendency of people to persist investing resources into something, even if it is destined to have no good outcome. We emphasize that the utilities associated with different alternatives are not static for decision makers, which is exactly opposite to the traditional perspective. This paper argues that the utility of an option may change due to the choice of another option, suggesting that decisions considered irrational by the traditional analytical method, i.e., sunk cost fallacy, may be rational. We propose a novel analytical method for decision making with sunk cost when considering the utility change and validate the effectiveness of this method through mathematical modeling and computational experiments. This paper mathematically describes such decision-making problems, analyzing the impact of changes in the utilities across different alternatives on decision making with a real-world example. Furthermore, we develop a two-stage stochastic optimization model for such decision-making problems and employ the sample average approximation (SAA) method to solve them. The results from computational experiments indicate that some decisions traditionally considered irrational are, in fact, rational when the utility of an option changes as a result of choosing another option. This paper, therefore, highlights the significance of incorporating utility changes into the decision-making process and stands as a valuable addition to the literature, offering a refreshed and effective decision-making method for improved decision making. [ABSTRACT FROM AUTHOR]

Radiological imaging is a globally prevalent diagnostic method, yet the free text contained in radiology reports is not frequently used for secondary purposes. Natural Language Processing can provide structured data retrieved from these reports. This paper provides a summary of the current state of research on Large Language Model (LLM) based approaches for information extraction (IE) from radiology reports. We conduct a scoping review that follows the PRISMA-ScR guideline. Queries of five databases were conducted on August 1st 2023. Among the 34 studies that met inclusion criteria, only pre-transformer and encoder-based models are described. External validation shows a general performance decrease, although LLMs might improve generalizability of IE approaches. Reports related to CT and MRI examinations, as well as thoracic reports, prevail. Most common challenges reported are missing validation on external data and augmentation of the described methods. Different reporting granularities affect the comparability and transparency of approaches. [ABSTRACT FROM AUTHOR]

Background: Despite disproportionate rates of mental ill-health compared with non-Indigenous populations, few programs have been tailored to the unique health, social, and cultural needs and preferences of young Aboriginal and Torres Strait Islander males. This paper describes the process of culturally adapting the US-based Young Black Men, Masculinities, and Mental Health (YBMen) Project to suit the needs, preferences, culture, and circumstances of Aboriginal and Torres Strait Islander males aged 16–25 years in the Northern Territory, Australia. YBMen is an evidence-based social media-based education and support program designed to promote mental health, expand understandings of gender and cultural identities, and enhance social support in college-aged Black men. Methods: Our adaptation followed an Extended Stages of Cultural Adaptation model. First, we established a rationale for adaptation that included assessing the appropriateness of YBMen's core components for the target population. We then investigated important and appropriate models to underpin the adapted program and conducted a non-linear, iterative process of gathering information from key sources, including young Aboriginal and Torres Strait Islander males, to inform program curriculum and delivery. Results: To maintain program fidelity, we retained the core curriculum components of mental health, healthy masculinities, and social connection and kept the small cohort, private social media group delivery but developed two models: 'online only' (the original online delivery format) and 'hybrid in-person/online' (combining online delivery with weekly in-person group sessions). Adaptations made included using an overarching Aboriginal and Torres Strait Islander social and emotional wellbeing framework and socio-cultural strengths-based approach; inclusion of modules on health and wellbeing, positive Indigenous masculinities, and respectful relationships; use of Indigenous designs and colours; and prominent placement of images of Aboriginal and Torres Strait Islander male sportspeople, musicians, activists, and local role models. Conclusions: This process resulted in a culturally responsive mental health, masculinities, and social support health promotion program for young Aboriginal and Torres Strait Islander males. Next steps will involve pilot testing to investigate the adapted program's acceptability and feasibility and inform further refinement. Keywords: Aboriginal, Torres Strait Islander, Indigenous, Australia, male, cultural adaptation, social media, mental health, masculinities, social support. [ABSTRACT FROM AUTHOR]

Ship maneuvering in ports is increasingly reduced because the increase in ship size is not proportional to the increase in port areas. Furthermore, the number of assisted vessels and the need for tugboats working in densely populated areas make it necessary to reduce the number of involved tugboats, reducing pollution and costs. Therefore, shiphandlers must know, in addition to the pivot point, the center of lateral resistance under any circumstance to optimize the assistance from tugboats and improve maritime navigation. From the literature, it is evident that the practical determination of the center of lateral resistance is still unknown. This paper aims to propose novel mathematical models to identify the position of this point and the most important variables that determine its position. For that, data of different ships in different conditions were obtained from a full mission bridge simulator. Afterwards, 15 novel mathematical models were developed, making use of artificial intelligence tools and training neural networks. The high determination factor reached in some models shows the accuracy of the obtained models. One advantage of the presented models is that they are very easy to be applied by shiphandlers, because highly well-known parameters are involved. Moreover, original 3D charts showing the combination of the input variables were generated to identify the map of the whole process. The very simple new models obtained and the novel 3D charts shown in the present paper can be considered useful and applicable by the shiphandlers of most of the merchant fleet to improve the efficiency and safety of maritime navigation in increasingly restricted waters. [ABSTRACT FROM AUTHOR]

Hydraulic rolling reshaper is an advanced reshaping tool to solve the problem of casing deformation, which has been widely used in recent years. When it is used for well repair operation, the reshaping force provided by ground devices is generally determined by experience. However, too large reshaping force may destroy the deformed casing, and too small reshaping force may also prolong the construction period and affect the repairing effect. In this paper, based on Hertz contact theory and elastic-plastic theory, combined with the process parameters of shaping, and considering the structural characteristics of the deformed casing and reshaper, we propose a mathematical model for calculating the reshaping force required for repairing deformed casing by hydraulic rolling reshaper. Meanwhile, the finite element model and numerical method of hydraulic rolling reshaper repairing deformed casing are established by using the finite element method, and the reliability of the mathematical model is verified by several examples. On this basis, the control variable method is used to investigate the influence of each parameter on the reshaping force, and the influence degree of each parameter is explored by orthogonal simulation test and Pearson correlation analysis. The research results not only provide an important theoretical basis for the prediction of reshaping force in on-site construction, but also provide a reference for the subsequent improvement of the shaping process. [ABSTRACT FROM AUTHOR]

Chemical mechanical planarization (CMP) is vital for ensuring chip fabrication uniformity at nanometer scales. The emergence of a series of phenomenological CMP process models (Stine et al., 1997; Gbondo-Tugbawa, 2002; Xie, 2007; Vasilev, 2011) suggests that the existing model upgrade approach is largely based on a change in phenomenological model assumptions, demanding deep insights into complex process mechanisms and protracted period for accuracy improvements. To tackle this issue, this paper proposes a decoupling regression strategy for model upgrades. This strategy employs a data-driven approach to enhance the coupling relationships within the model, facilitating continuous improvement of simulation accuracy based on the existing model. It is capable of achieving improvements in model accuracy even in scenarios where modelers lack insight into complex process mechanisms. We validate our method by upgrading the Density Step Height (DSH) model to the Extend-DSH model to address poor erosion predictions at the 28nm node. Comparing model predictions with silicon data reveals that the Extend-DSH model aligns better with the measured data, reducing the root mean square error from 159.31Å to 6.89Å and increasing the coefficient of determination from -0.83561 to 0.6058, showcasing the effectiveness of the proposed chip-level CMP model upgrade method grounded in the decoupling regression strategy. [ABSTRACT FROM AUTHOR]

Edge computing networks are critical infrastructures for processing massive data and providing instantaneous services. However, how to efficiently allocate resources in edge computing networks to meet the embedding requirements of service function chains has become an urgent problem. In this paper, we model the resource allocation problem in edge computing networks as a service function chain embedding problem model, aiming to optimize the resource allocation through reinforcement learning algorithms to achieve the goals of low cost, high revenue, and high embedding rate. In this paper, the basic concepts of edge computing network and service function chain are elaborated, and the resource allocation problem is transformed into a service function chain embedding problem by establishing a mathematical model, which provides a foundation for the subsequent algorithm design. In this paper, a service function chain embedding algorithm based on reinforcement learning is designed to gradually optimize the resource allocation decision by simulating the learning process. In order to verify the effectiveness of the algorithm, a series of simulation experiments are conducted in this paper and compared with other algorithms. The experimental results show that the service function chain embedding algorithm based on reinforcement learning proposed in this paper exhibits superior performance in resource allocation. Compared with traditional resource allocation methods, the algorithm achieves significant improvement in terms of low cost, high revenue, and high embedding rate. [ABSTRACT FROM AUTHOR]

To achieve an accurate measurement of tread size after fixed-length cutting, this paper proposes a point-cloud-based tread size measurement method. Firstly, a mathematical model of corner points and a reprojection error is established, and the optimal solution of the number of corner points is determined by the non-dominated sorting genetic algorithm II (NSGA-II), which reduces the reprojection error of the RGB-D camera. Secondly, to address the problem of the low accuracy of the traditional pixel metric ratio measurement method, the random sampling consensus point cloud segmentation algorithm (RANSAC) and the oriented bounding box (OBB) collision detection algorithm are introduced to complete the accurate detection of the tread size. By comparing the absolute error and relative error data of several groups of experiments, the accuracy of the detection method in this paper reaches 1 mm, and the measurement deviation is between 0.14% and 2.67%, which is in line with the highest accuracy standard of the national standard. In summary, the RGB-D visual inspection method constructed in this paper has the characteristics of low cost and high inspection accuracy, which is a potential solution to enhance the pickup guidance of tread size measurement. [ABSTRACT FROM AUTHOR]

This research paper explores the realm of fault detection in distributed motors through the vision of the Internet of electrical drives. This paper aims at employing artificial neural networks supported by the data collected by the Internet of distributed devices. Cross-verification of results offers reliable diagnosis of industrial motor faults. The proposed methodology involves the development of a cyber–physical system architecture and mathematical modeling framework for efficient fault detection. The mathematical model is designed to capture the intricate relationships within the cyber–physical system, incorporating the dynamic interactions between distributed motors and their edge controllers. Fast Fourier transform is employed for signal processing, enabling the extraction of meaningful frequency features that serve as indicators of potential faults. The artificial neural network based fault detection system is integrated with the solution, utilizing its ability to learn complex patterns and adapt to varying motor conditions. The effectiveness of the proposed framework and model is demonstrated through experimental results. The experimental setup involves diverse fault scenarios, and the system's performance is evaluated in terms of accuracy, sensitivity, and false positive rates. [ABSTRACT FROM AUTHOR]

The aim of this paper is to study existence results for a singular problem involving the p-biharmonic operator and the Hardy potential. More precisely, by combining monotonicity arguments with the variational method, the existence of solutions is established. By using the Nehari manifold method, the multiplicity of solutions is proved. An example is also given to illustrate the importance of these results. [ABSTRACT FROM AUTHOR]

Copyright of Journal of Remote Sensing is the property of Editorial Office of Journal of Remote Sensing & Science Publishing Co. and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Hydraulic power take-off (PTO) is increasingly favored as energy regulation and transmission system in wave energy converters (WEC), significantly smoothing the inherent randomness and fluctuation of wave energy. This paper designed a novel hydraulic PTO system composition of a double-acting hydraulic cylinder pump and accumulators. The dynamic process sub-division principle in an operating period of the hydraulic cylinder pump and accumulator and the mathematical model for explaining the fluctuations of pressure and flow rate in the hydraulic pump and accumulator circuit by means of the sub-division principle are put forward. The MATLAB/Simulink simulation model used to analyze pressure fluctuation in the hydraulic PTO system is established based on the mathematical model. The numerical results and MATLAB simulation results are mutually verified about the fine analysis of the accumulator smoothing fluctuation in the hydraulic PTO system. The results show that the pressure fluctuation amplitude of a hydraulic circuit is negatively correlated with the accumulator pre-charge pressure and the accumulator volume, and is positively correlated with the operating period of a hydraulic pump. The energy transfer efficiency of the hydraulic PTO system with accumulator fine compensation can be above 90%. The theory and model in this paper will serve as a valuable reference for designing fluctuation compensation parameters in hydraulic systems. [ABSTRACT FROM AUTHOR]

Tooth profile errors are the internal excitations that cause gear meshing errors, which are critical error factors affecting gear transmission accuracy. In existing studies, it is usually regarded as a constant or random distribution function. However, the actual machined tooth profile error is not a constant, so this estimation is inconsistent with the actual situation, resulting in an inaccurate evaluation of transmission accuracy. This paper proposes a method for representing tooth profile errors using distribution errors (including systematic and random errors), and a mathematical model of distributed tooth profile errors is presented. The contact stresses of the complex transmission system were compared with those obtained by formulas, proving that tooth profile errors increase contact stress. A method for calculating gear meshing error is proposed to evaluate the actual output accuracy of the complex transmission system. Compared with the test, the output accuracy is reduced by 13.8% under the temperature environment and distributed tooth profile errors. The proposed methods can accurately predict the transmission accuracy of precision transmission systems at the design stage and provide theoretical support for reducing systematic and random errors at the gear machining stage. [ABSTRACT FROM AUTHOR]

The role and potential impact of digital screen technology in the lives of children is heavily debated. Current evidence is limited by the weakness of measures typically used to characterise screen use, predominantly proxy- or self-reports with known inaccuracy and bias. However, robust and detailed evidence is needed to provide practical trustworthy guidance to families and professionals working with families. The purpose of this paper is to support researchers to select measurement method(s) that will provide robust and detailed evidence. The paper outlines the challenges in measuring contemporary screen use by children, using a child–technology interaction model to organise considerations. A range of different methods used to measure digital screen technology use in children and adolescents (i.e., questionnaires, diaries, electronically prompted sampling, direct observation, fixed room cameras, wearable/portable cameras, audio recorders, screen-device onboard logging, remote digital trace logging and proximity logging) are described along with examples of their use and constructs typically measured as well as a summary of the advantages and disadvantages of each method. A checklist and worked examples are provided to support researchers determining the best methods or combination of methods for a research project. [ABSTRACT FROM AUTHOR]

In order to study the effect of oxygen-enriched combustion technology on the temperature field and NO emission in the continuous heating furnace, this paper studies the oxygen-enriched combustion of a pushing steel continuous heating furnace in a domestic company. This study utilizes numerical simulation method, establishes the mathematical models of flow, combustion and NO generation combustion process in the furnace and analyzes the heat transfer process and NO generation in the furnace under different air oxygen content and different wind ratio. The research results show that with the increase of oxygen content in the air, the combustion temperature in the furnace rises significantly, and the emission concentration of NO increases. Furthermore, the NO emission concentration is related to the proportion of primary and secondary air. Graphic Abstract [ABSTRACT FROM AUTHOR]

This paper introduces an autonomous robot designed for in-pipe structural health monitoring of oil/gas pipelines. This system employs a 3D Optical Laser Scanning Technical Vision System (TVS) to continuously scan the internal surface of the pipeline. This paper elaborates on the mathematical methodology of 3D laser surface scanning based on dynamic triangulation. This paper presents the mathematical framework governing the combined kinematics of the Mobile Robot (MR) and TVS. It discusses the custom design of the MR, adjusting it to use of robustized mathematics, and incorporating a laser scanner produced using a 3D printer. Both experimental and theoretical approaches are utilized to illustrate the formation of point clouds during surface scanning. This paper details the application of the simple and robust mathematical algorithm RANSAC for the preliminary processing of the measured point clouds. Furthermore, it contributes two distinct and simplified criteria for detecting defects in pipelines, specifically tailored for computer processing. In conclusion, this paper assesses the effectiveness of the proposed mathematical and physical method through experimental tests conducted under varying light conditions. [ABSTRACT FROM AUTHOR]

Purpose: This study aims to investigate the healthcare sector of the United Arab Emirates (UAE) to explore the significance of servant leadership and collaborative culture in fostering social sustainability. The primary objective of this paper is to investigate how servant leadership and a collaborative culture contribute to social sustainability in health care in the UAE. With a focus on promoting well-being within healthcare organizations, the paper aims to uncover the synergies between servant leadership, collaborative culture, and social sustainability. Design/methodology/approach: This paper conducted a multilayer literature review of existing literature on servant leadership, collaborative culture and social sustainability in health care, both globally and specifically in the UAE context, and a conceptual model was proposed. Findings: Servant leadership proves to be a culturally pertinent and effective leadership model within the UAE due to its alignment with cultural values, emphasis on community support, and the robust health-care system that contributes to individual well-being. This combination establishes a solid foundation for fostering a healthy and sustainable society. Research limitations/implications: Limitations and implications are discussed. The current research has not identified the boundary conditions under which servant leadership and collaborative culture may be more or less effective. This could involve exploring industry-specific influences or contextual factors. Theoretical and practical implications are discussed. Originality/value: The research seeks to unravel the interconnections between servant leadership, collaborative culture and social sustainability. To the best of the author's knowledge, none of the studies have explored the interrelationships of these constructs, particularly in the UAE context. [ABSTRACT FROM AUTHOR]

This document is a preface to a special issue of the journal Mathematics titled "State-of-the-Art Mathematical Applications in Europe." The special issue features twelve original research papers and one review paper from European researchers and their collaborators in various fields of mathematics. The papers cover topics such as mathematical physics, applied mathematics, algebra, navigation algorithms, decision-making models, Lagrange interpolation polynomials, and nonlinear fractional differential equations. The preface provides a brief overview of each paper and expresses gratitude to the authors and reviewers. The special issue has received significant interest and demonstrates the importance of open access research in applied mathematics. [Extracted from the article]

Alzheimer's disease is a complex, multi-factorial, and multi-parametric neurodegenerative etiology. Mathematical models can help understand such a complex problem by providing a way to explore and conceptualize principles, merging biological knowledge with experimental data into a model amenable to simulation and external validation, all without the need for extensive clinical trials. We performed a scoping review of mathematical models describing the onset and evolution of Alzheimer's disease as a result of biophysical factors following the PRISMA standard. Our search strategy applied to the PubMed database yielded 846 entries. After using our exclusion criteria, only 17 studies remained from which we extracted data, which focused on three aspects of mathematical modeling: how authors addressed continuous time (since even when the measurements are punctual, the biological processes underlying Alzheimer's disease evolve continuously), howmodels were solved, and how the high dimensionality and non-linearity of models were managed. Most articles modeled Alzheimer's disease at the cellular level, operating on a short time scale (e.g., minutes or hours), i.e., the micro view (12/17); the rest considered regional or brain-level processes with longer timescales (e.g., years or decades) (the macro view). Most papers were concerned primarily with amyloid beta (n = 8), few described both amyloid beta and tau proteins (n = 3), while some considered more than these two factors (n = 6). Models used partial differential equations (n = 3), ordinary differential equations (n = 7), and both partial differential equations and ordinary differential equations (n = 3). Some did not specify their mathematical formalism (n = 4). Sensitivity analyses were performed in only a small number of papers (4/17). Overall, we found that only two studies could be considered valid in terms of parameters and conclusions, and two more were partially valid. This puts the majority (n = 13) as being either invalid or with insufficient information to ascertain their status. This was themain finding of our paper, in that serious shortcomings make their results invalid or non-reproducible. These shortcomings come from insufficient methodological description, poor calibration, or the impossibility of experimentally validating or calibrating the model. Those shortcomings should be addressed by future authors to unlock the usefulness of mathematicalmodels in Alzheimer's disease. [ABSTRACT FROM AUTHOR]

When the converter transformer core is grounded at multi-points, a fault loop will be formed and a circulation will be generated, leading to local overheating of the magnetic core and decomposition of insulating oil. Therefore, the converter transformer core will be single point grounded. As a rare internal lead of converter transformer, the ground current on the core ground lead can often reflect the running state of converter transformer. In this paper, theoretical analysis, modeling simulation and experimental research are carried out on the ground current of converter transformer at one point. Firstly, according to the structure characteristics of converter transformer, the analytical modeling of ground current is carried out. Secondly, based on the structure characteristics of oil paper insulation, the equivalent capacitance of converter transformer is calculated. Then, the analytical and finite element simulation model of converter transformer is established, and the ground current of converter transformer is calculated. Finally, the correctness of the proposed scheme is verified by measuring the grounding current of converter transformer core. [ABSTRACT FROM AUTHOR]

This work examines the impact of multi pre-exponential factors on the lifetime modelling of the paper in oil-immersed transformers. First, the corresponding pre-exponential factor was determined based on the concentrations of the three parameters known as oxygen, moisture and acid. Next, the pre-exponential factor for each of the parameters at different concentrations was combined based on the summative approach to obtain the overall impact on the lifetime of the paper. It is found that the expected life of the paper for overall multi pre-exponential factors is higher than either single or double pre-exponential factors. For a single pre-exponential factor, the expected life of the paper decreases by a factor of 59.8 as the oxygen concentration increases from 15,000 ppm to 210,000 ppm. Moisture can decrease the expected life of the paper by a factor of 34 as it increases from 0.5% to 5%. Low molecular weight acid (LMA) has a higher impact than high molecular weight acid (HMA), whereby its impact is further enhanced through multi pre-exponential factor effect whereby the expected life of the paper decreases by a factor of 7.9 as the moisture content increases from 0.5% to 5% and oxygen increases from 300 ppm to 20,000 ppm. [ABSTRACT FROM AUTHOR]

In spite of the IMO's efforts to improve the safety of intact stability on ships, synchronous rolling still causes large rolling angles, resulting in a very dangerous situation on board. The implementation of automatic tools to predict this undesirable situation has not been widely implemented. Furthermore, the safety of ship stability is not the only responsibility of people involved in the design process, so ship operators must have enough knowledge to predict and avoid these dangerous situations well in advance. Therefore, from a theoretical point of view, in the first part, this paper aims to present a valuable guiding tool for ship operators in order to predict synchronous rolling and avoid undesirable situations on board by making use of only empirical observations of the wave profile and moments. With this purpose, mathematical models are first proposed, with the ship sailing in the worst condition, i.e., with and without considering the damping factor, at zero speed and considering the influence of any pure beam and trochoidal waves. Relevant results shown provide the exact time and wave profile at which the maximum rolling angles are reached. In the second part of the paper, a new control system making use of AI tools is proposed in order to be used by ship operators on board, avoiding dangerous situations. Finally, the results are validated using a set of ship rolling simulations for the most common and representative ship loading conditions and wave periods. [ABSTRACT FROM AUTHOR]

In this paper, we obtain the existence of at least two standing waves (and homoclinic solutions) for a class of time-dependent (and time-independent) discrete nonlinear Schrödinger systems or equations. The novelties of the paper are as follows. (1) Our nonlinearities are composed of three mixed growth terms, i.e., the nonlinearities are composed of sub-linear, asymptotically-linear and super-linear terms. (2) Our nonlinearities may be sign-changing. (3) Our results can also be applied to the cases of concave-convex nonlinear terms. (4) Our results can be applied to a wide range of mathematical models. [ABSTRACT FROM AUTHOR]

In the achromatic White's grid, the grey patches between the grey lines are perceived as darker while the same elements inserted between white lines are perceived lighter than their true measured values. A number of authors attempted to calculate the magnitude and direction of this effect using mathematical models based on multiple spatial filters. This paper uses different mathematical model, based on regression analysis, which has shown itself as an excellent tool for prediction of direction and magnitude of White's effect. The psychophysical visual experiment was conducted on 38 subjects of both genders. The differences in lightness perception ∆L00 were calculated in CIE ∆E_2000 system. This paper determined the functional dependence of White's effect magnitude ∆L00 to the lightness L of rectangular elements in White's achromatic grid. The results gave the square polynomial of very high quality (R² = 0,974). Regression polynomials were also found. The gave numerical values ∆L00 of difference in perception of left and right elements in comparison to their physical values (left R² = 0,943, right R² = 0,938) in dependence to variation of lightness parameter L. Results of the research clearly show the mathematical pattern of White's effect based on the lightness of rectangular elements. [ABSTRACT FROM AUTHOR]

This paper presents the numerical solution of the heat conduction model with a fractional derivative of the Riemann–Liouville type with respect to the spatial variable. The considered mathematical model assumes the dependence on temperature of the material parameters (such as specific heat, density, and thermal conductivity) of the model. In the paper, the boundary conditions of the first and second types are considered. If the heat flux equal to zero is assumed on the left boundary, then the thermal symmetry is obtained, which results in a simplification of the problem and the possibility of considering only half the area. The numerical examples presented in the paper illustrate the effectiveness and convergence of the discussed computational method. [ABSTRACT FROM AUTHOR]

The object of research is the reliability of information in information-control systems. The work considers a solution to an important scientific and practical problem – increasing the reliability of information in real-time control systems, in particular in positioning systems on road transport. To solve this task, the use of information redundancy, in particular, parallel information redundancy, is proposed. The paper studies the influence of the probability of occurrence of a controlled event, the majority coefficient, as well as the number and quality of information sensors on the reliability of information in an information control system with parallel information redundancy. For these dependences, the corresponding plots were constructed. The paper shows that a change in the quality of information sensors by 20 % can lead to an increase in the reliability of information by more than 0.5. Also, the paper shows that an increase in the majority index by 1 can lead to a change in the reliability of information by more than 0.3. The paper investigates parallel information redundancy systems with different structures and defines formulas for calculating the probabilistic characteristics of their operation. The mathematical modeling was carried out taking into account the probability of occurrence of the controlled event, which made it possible to determine the tendencies to build information-control systems with parallel information redundancy to control events with variable probability of occurrence. The results obtained are based on the theory of probability. The results reported in this work can be used in the construction of an information and control system with a programmatically variable structure to control the occurrence of an event with a variable probability of occurrence, in particular in positioning systems on road transport. [ABSTRACT FROM AUTHOR]

This document discusses the challenges faced in mathematical modeling and controlling COVID-19 epidemics. It highlights the global impact of the pandemic on the economy and health, as well as the uneven effects on different age groups. The availability of vaccines led to mass vaccination campaigns, prompting researchers to implement new strategies and innovative approaches. The document also mentions various journals that have published special issues on COVID-19, covering topics such as forecasting, vaccination strategies, and control measures. The special issue presented in this document consists of eleven papers that analyze clinical characteristics, variant spread, economic recovery, mortality rates, non-pharmaceutical interventions, and coordinated actions. The papers propose mathematical models and control strategies to minimize disease spread and prioritize vaccination. The document emphasizes the multidisciplinary nature of the research, involving fields such as applied mathematics, data science, engineering, biology, and economics. Overall, this special issue provides valuable insights into the mathematical modeling and control of COVID-19 epidemics. [Extracted from the article]

Articulating the complexities of relational wellbeing can be challenging at the best of times, and even more complex during periods of heightened stress and uncertainty. Taking inspiration from feminist materialisms and recent writings on material methods, we explore the potential of object interviews to reveal the material-discursive dimensions of women's experiences of wellbeing during the pandemic. In this paper we describe our research process conducting object interviews with 38 women living in Aotearoa New Zealand from a range of socio-economic, cultural, and ethnic backgrounds. We explore the potential and challenges of object interviews for surfacing new ways of knowing (theoretically, methodologically, and cross-culturally) wellbeing beyond human-oriented health, medical and social-constructionist models, and towards more multidimensional and relational understandings. This paper offers our reflections and learnings about the process of re-turning object interviews and the potential of such approaches for evoking complex ways of knowing wellbeing during and beyond pandemic times. [ABSTRACT FROM AUTHOR]

Low fertility willingness has become a major practical reality in China. From the perspective of family gender equality, this paper analyzes the impact of division of housework on women's fertility willingness by using the data of China Family Panel Studies (CFPS). The results of propensity score matching method and instrumental variable method show that husbands' participation in housework can effectively improve wives' fertility willingness. Mechanism analysis shows that husbands' active participation in housework can effectively reduce wives' work–family conflict, increase wives' satisfaction with husbands' housework contribution, and help improve wives' happiness and fertility willingness. Further discussion on whether families have had children or not shows that women who have had children are more sensitive to their husbands' participation in housework. This study provides empirical evidence for the applicability of family gender equality theory in China and the factors affecting women's fertility willingness. [ABSTRACT FROM AUTHOR]

Due to today's competitive environment and information boom, companies are concerned about production planning in uncertain conditions. This paper integrates decision-making method with production scheduling model by considering limited resources. In this paper, a new mathematical model is extended for production project scheduling with multiple execution modes. The main aim of the formulation is to plan and schedule real production projects in uncertain environments. A new mixed-integer linear formulation is presented by considering trade-off of cost, time, as well as quality. Cost–time-quality trade-off is extended with the interval information. In the presented model, activity quality could be enhanced by reworking. The interval forms of some parameters, including duration, quality of activities, cost, and total available resources, are obtained by determining weights of experts and aggregating them. The presented group decision-making method is based on a bi-directional projection measure to deal with interval information. Since the mathematical model is multi-objective and some data are interval, a new modified solution method is developed for solving the model. The presented method for both decision-making and mathematical models is investigated by a real-world production project and two datasets to ascertain the accuracy of the model. Finally, an appropriate sensitivity analysis is proposed. [ABSTRACT FROM AUTHOR]

Bin packing problem (BPP) is one of the fastest-growing research issues within the field of combinatorial optimization. Over the last years, several studies carried out various BPP variants, mathematical models, and proposed methods to the BPPs. The classical BPP consists of packing a set of rectangular items in a minimum number of rectangular bins while respecting some constraints.Throughout the years, an improved typology was introduced by Wäscher et al. (2007), providing an excellent instrument for the organization and categorization criteria that defined the problem categories different from those of Dyckhoff (1990). Several early literature reviews have been conducted on various aspects of related packing problem variants.The contribution of this paper is to provide a comprehensive and refined taxonomy intended for BPPs. In addition to that, it is an up-to-date review based on a chronological taxonomy of the literature and depicts further research horizons.This systematic review allowed us to identify other characteristics and constraints, based on Wäscher's original ideas, mainly distinguished according to real cases studies. The detailed analysis provides a valuable framework for understanding the research gaps for future studies that should be acknowledged while proposing and solving new extensions. Note: The addresses of second and third authors have been corrected online. [ABSTRACT FROM AUTHOR]

The generation and distribution of furfural are significantly affected by moisture content in the insulating paper. However, the diffusion mechanism of furfural under moisture effect is not clear, hence, this study investigates the effect of moisture on the diffusion characteristics of furfural by combining macro experiment and micro molecular dynamics simulation. The simulation results demonstrate that the increased moisture content in paper accelerates the diffusion of furfural from paper to oil, which is also proved by the experimental data. Then, the results of interaction energy analysis indicate that the increase of moisture enhances the van der Waals force between oil and furfural. The present findings are expected to improve the theoretical level of furfural analysis, which will facilitate the aging evaluation of the transformer insulating paper based on furfural. [ABSTRACT FROM AUTHOR]