Search

Transverse synchronization of vertical displacements of all jacking-up points is an important monitoring indicator to replace bearings in assembled multigirder bridges during the jacking phase. Currently, using target paper to identify the 3D coordinates of control points reduces the complexity of monitoring operations and improves the stability of data precision. However, the existing planar target locating methods have low accuracy, inefficiency, and subjectivity, which seriously hinders the construction process of bearing replacement. Accurately obtaining the center coordinates of multiple targets from a point cloud in a short monitoring period remains a challenge. This study proposes a high-precision automated algorithm to extract target center points in low-density point clouds to quickly calculate real target center points. First, we construct a standard point cloud model of the target papers for scanning, including color and geometric features. Then, we extract the measured point cloud of the typical jacking operation phase based on the reflection intensity and size information. Next, we map the intensity values of the measured point cloud into the color channel and register the measured point cloud with its standard point cloud model using the normal vector estimation and colored ICP algorithms. Finally, we extract the center point of the measured targets. Numerical experiments and engineering test results show that the proposed method converges quickly with high precision and good robustness, which saves 91.4% of the time compared with the traditional method. In general, this research can provide effective technical support for 3D laser scanning in monitoring the operation phase of bridge jacking. [ABSTRACT FROM AUTHOR]

Cables are important components of long-span bridge structures, whose operation is significantly affected by cable force changes. Nowadays, cable force testing is performed by physical methods; that is, sensors are installed on the cable structure to monitor its force changes. Obviously, this strategy requires an extensive amount of time to achieve cable force calculation, which makes it impossible to monitor the force of the cable structure in real time. Meanwhile, smartphones have attracted extensive attention in the field of structural health monitoring (SHM) because of their higher cost-effectiveness than accelerometers, which include price and lifespan. Besides, many people own a smartphone, which leads to the possibility of a wider range of applications. Therefore, this paper presents a framework for the rapid estimation of the cable force of long-span bridges based on smartphones-captured video and a template matching algorithm. First, the empirical mode decomposition (EMD) method with wavelet decomposition (WD) method, that is, the EMDWD model, is constructed to extract the vibration signal of the bridge cable by eliminating the effects of smartphone vibration and environmental noise on the measured dynamic displacement, thus effectively improving the accuracy of data processing. In addition, the vibration identification model of bridge cable based on a template matching algorithm is established, and the deformation curve of cable is obtained. Finally, the frequency of bridge suspender is calculated by the Fourier transform method (FFT), and the cable force is estimated based on the smartphone-captured video. [ABSTRACT FROM AUTHOR]

Recently, the demand for high-precision balancing of rotors has increased in the automobile industry, as more rotors are designed to rotate at ever-higher speeds to maximize energy efficiency. The accumulation of measurement uncertainty in the balancing process decreases the accuracy of the unbalanced mass estimation, which is the ultimate goal of balancing. Here, the problem of uncertainty is shown through a Monte Carlo simulation of signals acquired from an actual production line. To reduce the effect of measurement uncertainty in the balancing procedures, a signal-processing technique that increases the dynamic reliability of the signal is proposed. The suggested method is based on density-based spatial clustering of applications with noise (DBSCAN) with the use of the orthogonality-based averaging method. Specifically, by adjusting radius values while clustering samples through the use of the DBSCAN method, the outliers that arise due to uncertainty are successfully removed. In this work, our proposed automatic-adaptive DBSCAN (AA-DBSCAN) method is validated by applying it to a balancing machine used for blower rotors in fuel cell electric vehicles. The results show that the deviation of the extracted influence coefficients is up to 0.0050, whereas the proposed method reduced it to less than 0.0037. In addition, the suggested procedure reduced the deviations of the unbalanced mass phase estimation by 35.2% as compared to the results found by the conventional method. Consequently, through the validation test, the suggested method was found to have the largest vibration decrease of any method considered in the study. [ABSTRACT FROM AUTHOR]