Search

Clouds are crucial in regulating the Earth's energy budget. Global cloud top heights have been easily retrieved from satellite measurements, but there are few methods for determining cloud base height (CBH) from satellite measurements. The Cloud Base Altitude Spatial Extrapolator (CBASE) algorithm was proposed to derive the height of the lower-troposphere liquid cloud base by using the Cloud-Aerosol Lidar with Orthogonal polarization cloud aerosol LiDAR (CALIOP) profiles and weather observations at airports from aviation routine and special weather report (METARs and SPECIs, called METAR) observation data in the United States. A modification to the CBASE algorithm over China (CNMETAR-CBASE) is presented in this paper. In this paper, the ability of the CBASE algorithm to calculate CBH in China is evaluated, and METAR observations over China (CNMETAR) were then used to modify the CBASE algorithm. The results including CNMETAR observation data in China can better retrieve CBH over China compared with the results using the original CBASE algorithm, and the accuracy of the global CBH results has been improved. Overestimations of CBH with the original algorithm range from 500 to 800 m in China, which have been reduced to about 300 m with an improved algorithm. The deviations calculated by the algorithm also have a significant reduction, from 480 m (CBASE) to 420 m (CNMETAR-CBASE). In conclusion, the modified CBASE algorithm not only calculates the CBH more accurately in China but also improves the results of the global CBH retrieved from satellites. [ABSTRACT FROM AUTHOR]

Covering the full texts of all papers published in MDPI's Remote Sensing between 2009 and 2021, in-depth scientometric analyses were conducted. Trends in publications show an increase in the overall number of papers. A relative increase in papers using SAR sensors and a relative decrease in papers using optical remote sensing can also be seen. The full-text analyses reveal distinctive styles and writing patterns for papers from different sub-fields of remote sensing and for different countries and even cities. While a slight increase in the readability of abstracts is detected over time, the overall readability of papers is decreasing. Institutional co-authorship analysis reveals the ongoing 'scientific decoupling' between China and the USA in remote sensing. Using scientometric full-text analysis, current trends and developments are revealed. [ABSTRACT FROM AUTHOR]

The increasing global warming trend has resulted in the mass loss of most glaciers. The Urumqi Vally, located in the dry and cold zone of China, and its widely dispersed glaciers are significant to the regional ecological environment, oasis economic development, and industrial and agricultural production. This is representative of glaciers in Middle Asia and represents one of the world's longest observed time series of glaciers, beginning in 1959. The Urumqi Headwater Glacier No. 1 (UHG-1) has a dominant presence in the World Glacier Monitoring Service (WGMS). This paper supplies a comprehensive analysis of past studies and future modeling of glacier changes in the Urumqi Valley. It has received insufficient attention in the past, and the mass balance of UHG-1 was used to verify that the geodetic results and the OGGM model simulation results are convincing. The main conclusions are: The area of 48.68 ± 4.59 km2 delineated by 150 glaciers in 1958 decreased to 21.61 ± 0.27 km2 delineated by 108 glaciers in 2022, with a reduction of 0.47 ± 0.04 km2·a−1 (0.96% a−1 in 1958–2022). The glacier mass balance by geodesy is −0.69 ± 0.11 m w.e.a−1 in 2000–2022, which is just deviating from the measured result (−0.66 m w.e.a−1), but the geodetic result in this paper can be enough to reflect the glacier changes (−0.65 ± 0.11 m w.e.a−1) of the URB in 2000–2022. The future loss rate of area and volume will undergo a rapid and then decelerating process, with the fastest and slowest inflection points occurring around 2035 and 2070, respectively. High temperatures and large precipitation in summer accelerate glacier loss, and the corresponding lag period of glacier change to climate is about 2–3 years. [ABSTRACT FROM AUTHOR]

A non-periodic "step-like" variation in displacement is exhibited owing to the repeated instability of expansive soil landslides. The dynamic prediction of deformation for expansive soil landslides has become a challenge in actual engineering for disaster prevention and mitigation. Therefore, a support vector regression prediction (AMPSO-SVR) model based on adaptive mutation particle swarm optimization is proposed, which is suitable for small samples of data. The shallow displacement is decomposed into a trend component and fluctuating component by complete ensemble empirical mode decomposition with adaptive noise (CEEMDAN), and the trend displacement is predicted by cubic polynomial fitting. In this paper, the multiple disaster-inducing factors of expansive landslides and the time hysteresis effect between displacement and its influencing factors are fully considered, and the crucial influencing factors which eliminate the time lag effect and state factors are input into the model to predict the fluctuation displacement. Monitoring data in the Ningming area of China are employed for the model validation. The predicted results are compared with those of the traditional model. The model performance is evaluated through indicators such as the goodness of fit R2 and root mean square error RMSE. The results show that the prediction RMSE of the new model for three monitoring stations can reach 2.6 mm, 6.6 mm, and 2.5 mm, respectively. Compared with the common Grid search support vector regression (GS-SVR), the Particle Swarm Optimization Support Vector Regression (PSO-SVR) and Back Propagation Neural Network (BPNN) models have average improvements of 58.4%, 38.1%, and 25.2% respectively. The goodness of fit R2 is superior to 0.99 in the new method. The proposed model can effectively be deployed for the displacement prediction of non-periodic stepped expansive soil landslides driven by multiple influencing factors, providing a reference idea for the deformation prediction of expansive soil landslides. [ABSTRACT FROM AUTHOR]

The timely and accurate acquisition of information on the distribution of the crop planting structure in the Loess Plateau of eastern Gansu Province, one of the most important agricultural areas in Western China, is crucial for promoting fine management of agriculture and ensuring food security. This study uses multi-temporal high-resolution remote sensing images to determine optimal segmentation scales for various crops, employing the estimation of scale parameter 2 (ESP2) tool and the Ratio of Mean Absolute Deviation to Standard Deviation (RMAS) model. The Canny edge detection algorithm is then applied for multi-scale image segmentation. By incorporating crop phenological factors and using the L1-regularized logistic regression model, we optimized 39 spatial feature factors—including spectral, textural, geometric, and index features. Within a multi-level classification framework, the Random Forest (RF) classifier and Convolutional Neural Network (CNN) model are used to classify the cropping patterns in four test areas based on the multi-scale segmented images. The results indicate that integrating the Canny edge detection algorithm with the optimal segmentation scales calculated using the ESP2 tool and RMAS model produces crop parcels with more complete boundaries and better separability. Additionally, optimizing spatial features using the L1-regularized logistic regression model, combined with phenological information, enhances classification accuracy. Within the OBIC framework, the RF classifier achieves higher accuracy in classifying cropping patterns. The overall classification accuracies for the four test areas are 91.93%, 94.92%, 89.37%, and 90.68%, respectively. This paper introduced crop phenological factors, effectively improving the extraction precision of the shattered agricultural planting structure in the Loess Plateau of eastern Gansu Province. Its findings have important application value in crop monitoring, management, food security and other related fields. [ABSTRACT FROM AUTHOR]

Although atmospheric CO2 concentrations collected by satellites play a crucial role in understanding global greenhouse gases, the sparse geographic distribution greatly affects their widespread application. In this paper, a hybrid CNN and spatiotemporal Kriging (CNN-STK) model is proposed to generate a monthly spatiotemporal continuous XCO2 dataset over China at 0.25° grid-scale from 2015 to 2020, utilizing OCO-2 XCO2 and geographic covariates. The validations against observation samples, CAMS XCO2 and TCCON measurements indicate the CNN-STK model is effective, robust, and reliable with high accuracy (validation set metrics: R2 = 0.936, RMSE = 1.3 ppm, MAE = 0.946 ppm; compared with TCCON: R2 = 0.954, RMSE = 0.898 ppm and MAE = 0.741 ppm). The accuracy of CNN-STK XCO2 exhibits spatial inhomogeneity, with higher accuracy in northern China during spring, autumn, and winter and lower accuracy in northeast China during summer. XCO2 in low-value-clustering areas is notably influenced by biological activities. Moreover, relatively high uncertainties are observed in the Qinghai-Tibet Plateau and Sichuan Basin. This study innovatively integrates deep learning with the geostatistical method, providing a stable and cost-effective approach for other countries and regions to obtain regional scales of atmospheric CO2 concentrations, thereby supporting policy formulation and actions to address climate change. [ABSTRACT FROM AUTHOR]

The current deformation and stable state of slopes with historical shatter signs is a concern for engineering construction. Suspected landslide scarps were discovered at the rear edge of the Genie slope on the Tibetan Plateau during a field investigation. To qualitatively determine the current status of the surface deformation of this slope, this study used high-resolution optical remote sensing, airborne light detection and ranging (LiDAR), and interferometric synthetic aperture radar (InSAR) technologies for comprehensive analysis. The interpretation of high-resolution optical and airborne LiDAR data revealed that the rear edge of the slope exhibits three levels of scarps. However, no deformation was detected with differential InSAR (D-InSAR) analysis of ALOS-1 radar images from 2007 to 2008 or with Stacking-InSAR and small baseline subset InSAR (SBAS-InSAR) processing of Sentinel-1A radar images from 2017 to 2020. This study verified the credibility of the InSAR results using the standard deviation of the phase residuals, as well as in-borehole displacement monitoring data. A conceptual model of the slope was developed by combining field investigation, borehole coring, and horizontal exploratory tunnel data, and the results indicated that the slope is composed of steep anti-dip layered dolomite limestone and that the scarps at the trailing edges of the slope were caused by historical shallow toppling. Unlike previous remote sensing studies of deformed landslides, this paper argues that remote sensing results with reliable accuracy are also applicable to the study of undeformed slopes and can help make preliminary judgments about the stability of unexplored slopes. The study demonstrates that the long-term consistency of InSAR results in integrated remote sensing can serve as an indicator for assessing slope stability. [ABSTRACT FROM AUTHOR]

Understanding changes of soil organic carbon (SOC) in top layers of croplands and their driving factors is a vital prerequisite in decision-making for maintaining sustainable agriculture. However, high-precision estimation of SOC of croplands at regional scale is still an issue to be solved. Based on soil samples, synthetic image of bare soil and geographical data, this paper predicted SOC density of croplands using Random Forest model in the Black Soil Region of Jilin Province, China in 2005 and 2020, and analyzed its influencing factors. Results showed that random forest model that integrates bare soil composite images improve the accuracy and robustness of SOC density prediction. From 2005 to 2020, the total SOC storage in croplands decreased from 89.96 to 82.79 Tg C with an annual decrease of 0.48 Tg C yr−1. The mean value of SOC density of croplands decreased from 3.42 to 3.32 kg/m2, and high values are distributed in middle parts. Changes of SOC represented significant heterogeneity spatially. 62.14% of croplands with SOC density greater than 4.0 kg/m2 decreased significantly, and 38.60% of croplands with SOC density between 2.5 and 3.0 kg/m2 significantly increased. Climatic factors made great contributions to SOC density, however, their relative importance (RI) to SOC density decreased from 44.65% to 37.26% during the study period. Synthetic images of bare soil constituted 23.54% and 26.29% of RI in the SOC density prediction, respectively, and the contribution of each band was quite different. The RIs of topographic and vegetation factors were low but increased significantly from 2005 to 2020. This study can aid local land managers and governmental agencies in assessing carbon sequestration potential and carbon credits, thus contributing to the protection and sustainable use of black soils. [ABSTRACT FROM AUTHOR]

In unconventional oil and gas development, the hydraulic fracturing (HF) technique is adopted to inject high-pressure fluid into the reservoir and change its pore-fracture connection structure to enhance production. HF causes the rocks to crack and generates microseismic events (with moment magnitudes of M w ≤ 3 ). Studying the microseismic focal mechanisms (shear/tensile/compressive HF cracks) is helpful for characterizing fracture geometry, monitoring the in situ stress state, and evaluating the HF effects to optimize the reservoir reconstruction for increasing production. Due to fluid injection activity, there may be non-double-couple (non-DC) mechanisms associated with HF cracks, and the commonly used double-couple (DC) source model may not be suitable. For the moment tensor (MT) source model, which is commonly used to describe the non-DC mechanism, inversion is challenging in single-well monitoring. The shear-tensile general dislocation (GD) model includes a non-DC mechanism, and its inversion is more constrained than the full MT model by specifying the focal mechanism as shear-tensile (or compressive) faulting. This paper reports a focal mechanism inversion case study of HF shear/tensile/compressive cracks in a tight oil reservoir in the Ordos Basin, China. We perform inversions based on the DC, GD, and MT source models, respectively. The results indicate that, for the downhole monitoring geometry in this study, most of the DC inversions fail to obtain proper synthetic and observed waveform fitting results, and the MT inversion results of different microseismic events exhibit worse consistencies than the GD results. According to the GD results, almost all the HF cracks can be explained as strike-slip faulting and most cracks correspond to non-negligible tensile/compressive mechanisms. Our study suggests that the GD source model is preferred in downhole microseismic monitoring to obtain reliable shear/tensile/compressive HF cracks, and the inverted non-zero slope angle reduces the uncertainty in fracturing geometry characterization, which will help improve microseismic studies and HF evaluations for enhanced resource recovery. [ABSTRACT FROM AUTHOR]

Before 2008, China lacked high-coverage regional surface observation data, making it difficult for the China Meteorological Administration Land Data Assimilation System (CLDAS) to directly backtrack high-resolution, high-quality land assimilation products. To address this issue, this paper proposes a deep learning model named UNET_DCA, based on the UNET architecture, which incorporates a Dual Cross-Attention module (DCA) for multiscale feature fusion by introducing Channel Cross-Attention (CCA) and Spatial Cross-Attention (SCA) mechanisms. This model focuses on the near-surface 10-m wind field and achieves spatial downscaling from 6.25 km to 1 km. We conducted training and validation using data from 2020–2021, tested with data from 2019, and performed ablation experiments to validate the effectiveness of each module. We compared the results with traditional bilinear interpolation methods and the SNCA-CLDASSD model. The experimental results show that the UNET-based model outperforms SNCA-CLDASSD, indicating that the UNET-based model captures richer information in wind field downscaling compared to SNCA-CLDASSD, which relies on sequentially stacked CNN convolution modules. UNET_CCA and UNET_SCA, incorporating cross-attention mechanisms, outperform UNET without attention mechanisms. Furthermore, UNET_DCA, incorporating both Channel Cross-Attention and Spatial Cross-Attention mechanisms, outperforms UNET_CCA and UNET_SCA, which only incorporate one attention mechanism. UNET_DCA performs best on the RMSE, MAE, and COR metrics (0.40 m/s, 0.28 m/s, 0.93), while UNET_DCA_ars, incorporating more auxiliary information, performs best on the PSNR and SSIM metrics (29.006, 0.880). Evaluation across different methods indicates that the optimal model performs best in valleys, followed by mountains, and worst in plains; it performs worse during the day and better at night; and as wind speed levels increase, accuracy decreases. Overall, among various downscaling methods, UNET_DCA and UNET_DCA_ars effectively reconstruct the spatial details of wind fields, providing a deeper exploration for the inversion of high-resolution historical meteorological grid data. [ABSTRACT FROM AUTHOR]

Knowledge of wind field characteristics and variation principles in complex topographical regions is of great importance for the development of numerical prediction models, aviation safety support, and wind energy utilization. However, there has been limited research focused on the lower-tropospheric wind fields in the Qinghai-Tibet Plateau. This paper aims to study the wind characteristics, vertical distributions, and temporal variations in the northeast of the plateau by analyzing a four-year continuous dataset collected from a Doppler wind LiDAR deployed in Xining, Qinghai Province of China. The results indicate that the prevailing horizontal wind direction in the low levels is primarily influenced by the mountain-valley wind circulation. However, as the altitude increases, the prevailing winds are predominantly affected by the westerlies. From a diurnal perspective, noticeable transition processes between up-valley and down-valley winds can be observed. The west-northwest wind (down-valley wind) dominates from late night to morning, while the east-southeast wind (up-valley wind) prevails from afternoon to early evening. The vertical winds in the low levels exhibit a downward motion during the daytime and an upward motion during the nighttime. In this plateau valley, the wind shear exponent is found to be highest in spring and lowest in winter, and it is generally lower during the daytime compared to the nighttime. [ABSTRACT FROM AUTHOR]

Spartina alterniflora (S. alterniflora) has grown rapidly in China since its introduction in 1979, showing the trend of alien species invasion, which has seriously affected the ecosystem balance of coastal wetlands. The temporal and spatial expansion law of S. alterniflora can be obtained through remote sensing monitoring, which can provide a reference and basis for S. alterniflora management. This paper presents a method for extracting and mapping S. alterniflora based on phenological characteristics. The coastal areas of the Yangtze River Delta Urban Agglomeration are selected as the research area, and the Landsat time series data from 1990 to 2022 on the Google Earth Engine (GEE) platform are used to support the experiment in this paper. Firstly, the possible growing area of S. alterniflora was extracted using the normalized differential moisture index (NDMI), normalized differential vegetation index (NDVI), and normalized differential water index (NDWI); Then, the time series curve characterizing the phenological characteristics of vegetation was constructed using the vegetation index to determine the difference phase of phenological characteristics between S. alterniflora and other vegetation. Finally, a decision tree was constructed based on the phenological feature difference phase data to extract S. alterniflora, and it is applied to the analysis of temporal and spatial changes of S. alterniflora in the study area from 1990 to 2022. The results show that the area of S. alterniflora increased from ~1426 ha in 1990 to ~44,508 ha in 2022. However, the area of S. alterniflora began to show negative growth in 2015 due to the construction of nature reserves and ecological management. The results of correlation analysis showed that the growth of C. japonicum was significantly affected by temperature stress and weakly affected by precipitation. This study verified that Landsat time series images can effectively extract vegetation phenological information, which has strong feasibility for extraction and dynamic monitoring of S. alterniflora and provides technical support for the management and monitoring of invasive plants in coastal wetlands. [ABSTRACT FROM AUTHOR]

Haiyang-2A (HY-2A) is the first marine dynamic environment satellite established by China, which has made significant contributions to the marine scientific research field. It carries the satellite-based GPS receiver named HY2, which was independently developed by China. It is an experimental satellite-borne GPS receiver for low earth orbit satellites, and during its operational period in orbit, the satellite-borne GPS data are not made accessible to the public. Therefore, this paper assesses the quality of HY-2A satellite-borne GPS data based on indicators such as satellite visibility, multipath effect, and ionospheric delay. The results indicate that the data acquired by the HY2 receiver are of high quality. The precise orbit determination (POD) uses the reduced-dynamic (RD) method. The adjustment effects of the pseudo-stochastic pulse time interval and a priori sigma on POD are analyzed, and the antenna phase center variation (PCV) is estimated using the direct method and residual method. Furthermore, this paper investigates the impact of PCV models with different resolutions (10° × 10° and 5° × 5°) on satellite orbit determination. To evaluate the orbit precision, three methods are used for validation, including carrier phase residual analysis, external precise science orbit (PSO) validation, and SLR three-dimensional (3D) validation, respectively. The results indicate that the highest orbit precision is achieved when the pseudo-stochastic pulse time interval is configured to 15 min, with the a priori sigma of 1 × 10−8 m/s2. The orbit carrier phase residuals reach the millimeter level. The 10° × 10°PCV model was estimated using the direct method and residual method, respectively; the root mean square of the external orbit validation for both methods show a millimeter-level improvement. The results obtained from the direct method and residual method are comparable. The resolution is increased from 10° to 5°, and the improvement in orbital precision is relatively small. The results obtained from the SLR 3D validation are consistent with those from the external PSO validation. The experimental results contribute valuable information for the POD of the HY2 series satellites. [ABSTRACT FROM AUTHOR]

Microwave hyperspectral instruments represent one of the main atmospheric sounders of China's next-generation Fengyun meteorological satellites. In order to better apply microwave hyperspectral observations in the fields of atmospheric parameter retrieval and data assimilation, this paper analyzes the sensitivity of trace gases to five selected bandwidth channels using a radiative transfer model based on the simulated data of microwave hyperspectral radiances at 50–60 GHz. This method uses information entropy and a weighting function to select channels and analyze the impact of this on the retrieval accuracy of atmospheric profiles before and after channel selection. The experimental results show that channel selection can reduce the number of channels by approximately 74.05% while maintaining a large amount of information content, and this retrieval effect is significantly better than that of MWTS-III. After channel selection, the 10 MHz, 30 MHz, and 50 MHz bandwidths have the best retrieval results in the stratosphere, whole atmosphere, and troposphere, respectively. When considering the number of channels, computational scale, and retrieval results comprehensively, the channel selection method is effective. [ABSTRACT FROM AUTHOR]

Winter wheat is a significant global food crop, and it is crucial to monitor its distribution for better agricultural management, land planning, and environmental sustainability. However, the distribution style of winter wheat planting fields is not consistent due to different terrain conditions. In mountainous areas, winter wheat planting units are smaller in size and fragmented in distribution compared to plain areas. Unfortunately, most crop-mapping research based on deep learning ignores the impact of topographic relief on crop distribution and struggles to handle hilly areas effectively. In this paper, we propose a cross-modal segmentation network for winter wheat mapping in complex terrain using remote-sensing multi-temporal images and DEM data. First, we propose a diverse receptive fusion (DRF) module, which applies a deformable receptive field to optical images during the feature fusion process, allowing it to match winter wheat plots of varying scales and a fixed receptive field to the DEM to extract evaluation features at a consistent scale. Second, we developed a distributed weight attention (DWA) module, which can enhance the feature intensity of winter wheat, thereby reducing the omission rate of planting areas, especially for the small-sized regions in hilly terrain. Furthermore, to demonstrate the performance of our model, we conducted extensive experiments and ablation studies on a large-scale dataset in Lanling county, Shandong province, China. Our results show that our proposed CM-Net is effective in mapping winter wheat in complex terrain. [ABSTRACT FROM AUTHOR]

The continuous downward movement exhibited by the Lashagou landslide group in recent years poses a significant threat to the safety of both vehicles and pedestrians traversing the highway G310. By integrating geomorphological interpretation using multi-temporal optical images, interferometric synthetic aperture radar (InSAR) measurements, and continuous global navigation satellite system (GNSS) observations, this paper traced the formation period of the Lashagou landslide group, and explored its kinematic behavior under external drivers such as rainfall and snowmelt. The results indicate that the formation period can be specifically categorized into three periods: before, during, and after the construction of highway G310. The construction of highway G310 is the direct cause and prerequisite for the formation of the Lashagou landslide group, whereas summer precipitation and spring snowmelt are the external driving factors contributing to its continuous downward movement. Additionally, both the long-term seasonal downslope movement and transient acceleration events are strongly controlled by rainfall, and there is a time lag of approximately 1–2 days between the transient acceleration and heavy rainfall events. This study highlights the benefits of leveraging multi-source remote sensing data to investigate slow-moving landslides, which is advantageous for the implementation of effective control and engineering intervention to mitigate potential landslide disasters. [ABSTRACT FROM AUTHOR]

The "Yangtze River Economic Belt Development Strategy" is one of China's three major national development strategies. Enhancing the protection and quality of arable land in the Yangtze River Economic Belt (YEB) is pivotal for fostering regional growth. In this study, land use data spanning the years 1980 to 2020 in the YEB were extracted from the national land use database maintained by the Resource and Environment Data Center of the Chinese Academy of Sciences. Employing Geographic Information System (GIS) spatial analysis techniques and arable land change metrics, the study delineated the spatiotemporal characteristics of arable land alterations across the YEB for the period. Additionally, using grain output data at the prefecture level from 2011 to 2020, the paper calculated provincial grain output to analyze the impact of arable land changes over the last four decades on grain output. The findings revealed that: (1) From 1980 to 2020, the total arable land area in the YEB decreased by approximately 41,775 square kilometers, with the most significant decrease occurring in the downstream region. (2) From 1980 to 1990, the primary factor contributing to the decrease in arable land area was the expansion of water bodies, while from 1990 to 2020, the principal reason for the reduction in arable land area was the expansion of construction land. (3) From 1980 to 2020, the decrease in arable land area resulted in a net reduction of approximately 25.12 million tons in total grain output, with the largest decline observed in the downstream regions and the smallest decline in the upstream regions. (4) Consistent with the trends in arable land area reduction, the main reason for the decline in grain output from 1980 to 1990 was the expansion of water bodies encroaching upon arable land, whereas from 2000 to 2010, the primary cause of arable land reduction was the expansion of construction land areas. In conclusion, the research suggested that over the past four decades, the primary driver behind the reduction in arable land within the YEB has been the expansion of construction land areas. Particularly noteworthy was the period from 2000 to 2010, during which the impact of arable land reduction on grain output was most pronounced. This period coincided with the rapid economic development and accelerated urbanization process within the YEB. [ABSTRACT FROM AUTHOR]

Freeze–thaw (FT) erosion intensity may exhibit a future increasing trend with climate warming, humidification, and permafrost degradation in the Qinghai–Tibet Plateau (QTP). The present study provides a reference for the prevention and control of FT erosion in the QTP, as well as for the protection and restoration of the regional ecological environment. FT erosion is the third major type of soil erosion after water and wind erosion. Although FT erosion is one of the major soil erosion types in cold regions, it has been studied relatively little in the past because of the complexity of several influencing factors and the involvement of shallow surface layers at certain depths. The QTP is an important ecological barrier area in China. However, this area is characterized by harsh climatic and fragile environmental conditions, as well as by frequent FT erosion events, making it necessary to conduct research on FT erosion. In this paper, a total of 11 meteorological, vegetation, topographic, geomorphological, and geological factors were selected and assigned analytic hierarchy process (AHP)-based weights to evaluate the FT erosion intensity in the QTP using a comprehensive evaluation index method. In addition, the single effects of the selected influencing factors on the FT erosion intensity were further evaluated in this study. According to the obtained results, the total FT erosion area covered 1.61 × 106 km2, accounting for 61.33% of the total area of the QTP. The moderate and strong FT erosion intensity classes covered 6.19 × 105 km2, accounting for 38.37% of the total FT erosion area in the QTP. The results revealed substantial variations in the spatial distribution of the FT erosion intensity in the QTP. Indeed, the moderate and strong erosion areas were mainly located in the high mountain areas and the hilly part of the Hoh Xil frozen soil region. [ABSTRACT FROM AUTHOR]

The Ozone Monitoring Suite-Nadir (OMS-N) instrument is the first hyperspectral remote sensor in the ultraviolet band of China's Fengyun series satellites. It can be used to detect several kinds of atmospheric constituents. This paper describes the prelaunch spectral calibration of the OMS-N onboard FengYun 3F. Several critical spectral parameters including the spectral resolution, spectral dispersion, and the instrument spectral response function were determined through laser-based measurements. A secondary peak of the instrument spectral response function from the short wavelength side of the ultraviolet band was found, and the possible influence on data applications was analyzed using a reference solar model and radiative transfer model. The results indicate that the spectral resolution and spectral accuracy of OMS-N meet the mission requirements. However, the asymmetries in the instrument spectral response function in the ultraviolet band were found near nadir rows, which are expressed as the "asymmetric central peak" and "secondary peak". The analysis results show that if the influences of the instrument spectral response function "asymmetric central peak" and "secondary peak" in the ultraviolet band are ignored, they will bring an error as large as 5% at the center of the absorption line. [ABSTRACT FROM AUTHOR]

Research on wildlife monitoring methods is a crucial tool for the conservation of rare wildlife in China. However, the fact that rare wildlife monitoring images in field scenes are easily affected by complex scene information, poorly illuminated, obscured, and blurred limits their use. This often results in unstable recognition and low accuracy levels. To address this issue, this paper proposes a novel wildlife identification model for rare animals in Giant Panda National Park (GPNP). We redesigned the C3 module of YOLOv5 using NAMAttention and the MemoryEfficientMish activation function to decrease the weight of field scene features. Additionally, we integrated the WIoU boundary loss function to mitigate the influence of low-quality images during training, resulting in the development of the NMW-YOLOv5 model. Our model achieved 97.3% for mAP50 and 83.3% for mAP50:95 in the LoTE-Animal dataset. When comparing the model with some classical YOLO models for the purpose of conducting comparison experiments, it surpasses the current best-performing model by 1.6% for mAP50:95, showcasing a high level of recognition accuracy. In the generalization ability test, the model has a low error rate for most rare wildlife species and is generally able to identify wildlife in the wild environment of the GPNP with greater accuracy. It has been demonstrated that NMW-YOLOv5 significantly enhances wildlife recognition accuracy in field environments by eliminating irrelevant features and extracting deep, effective features. Furthermore, it exhibits strong detection and recognition capabilities for rare wildlife in GPNP field environments. This could offer a new and effective tool for rare wildlife monitoring in GPNP. [ABSTRACT FROM AUTHOR]

The investigation of reactivated landslides in the alpine-canyon areas suffers the difficult accessibility of precipitous terrain. In particular, when reactivated landslides occur along the major roads, efforts are focused on measuring ground surface displacements during road construction. Nevertheless, the ancient landslide deposits may reactivate after several years of road operation, while they show a stable state during the road construction. The characterization of this type of reactivated landslides is challenging, due to their complex mechanism and the limited monitoring data. Appropriate multi-source data can provide insights into deformation fields and enhance the understanding of landslide mechanisms, ensuring the outperformance of remedial works. This paper reports a recent Tangjiawan reactivated landslide along the Wenchuan-Maerkang Highway in Li County, China. The outcomes, including satellite InSAR, in situ real-time monitoring, and detailed ground and UAV investigation, conducted at this landslide are presented. Early deformation of the reactivated landslide began from 2019, with an InSAR-derived velocity of −11.7 mm/year, furthermore, a significant subsidence of about 21.2 mm, which occurred within a span of only 12 days from 3 June 2020 to 15 June 2020, was observed. The deformation characteristics derived from in situ monitoring during the remedial works were likely firstly associated with the initial unreinforced slope condition and the heavy rainfall. Subsequently, the displacement evolution transformed into deformation induced by time-dependent reduction in slope strength under rainfall conditions. The existing of unconsolidated deposits derived from ancient landslides, along with a fragile geo-structure consisting of rock blocks and gravels interlayered with breccias, exacerbated by large relief created a predisposition for landslide reactivation. Furthermore, 13 days of antecedent cumulative rainfall totaling 224.5 mm directly triggered the occurrence of a landslide event. The significance and implications of integrating multiple monitoring techniques are emphasized. [ABSTRACT FROM AUTHOR]

Precipitation is the basic component of the Earth's water cycle. Obtaining high-resolution and high-precision precipitation data is of great significance. This paper establishes a precipitation retrieval model based on a random forest classification and regression model during the day and at night with FY-4B/AGRI Level1 data on China from July to August 2022. To evaluate the retrieval effect of the model, the GPM IMERG product is used as a reference, and the retrieval results are compared against those of the FY-4B/AGRI operational precipitation product. In addition, the retrieval results are analyzed according to different underlying surfaces. The results showed that compared with the FY-4B/AGRI operational precipitation product, the retrieval model can better identify precipitation and capture precipitation areas of light rain, moderate rain, heavy rain and torrential rain. Among them, the probability of detection (POD) of the day model increased from 0.328 to 0.680, and the equitable threat score (ETS) increased from 0.252 to 0.432. The POD of the night model increased from 0.337 to 0.639, and the ETS score increased from 0.239 to 0.369. Meanwhile, the precipitation estimation accuracy of the day model increased by 38.98% and that of the night model increased by 40.85%. Our results also showed that due to the surface uniformity of the ocean, the model can identify precipitation better on the ocean than on the land. Our findings also indicated that for the different underlying surfaces of the land, there is no significant difference in each evaluation index of the model. This is a strong argument for the universal applicability of the model. Notably, the results showed that, especially for more vegetated areas and areas covered by water, the model is capable of estimating precipitation. In conclusion, the precipitation retrieval model that is proposed herein can better determine precipitation regions and estimate precipitation intensities compared with the FY-4B/AGRI operational precipitation product. It can provide some reference value for future precipitation retrieval research on FY-4B/AGRI. [ABSTRACT FROM AUTHOR]

The accurate estimation of forest aboveground biomass is of great significance for forest management and carbon balance monitoring. Remote sensing instruments have been widely applied in forest parameters inversion with wide coverage and high spatiotemporal resolution. In this paper, the capability of different remote-sensed imagery was investigated, including multispectral images (GaoFen-6, Sentinel-2 and Landsat-8) and various SAR (Synthetic Aperture Radar) data (GaoFen-3, Sentinel-1, ALOS-2), in aboveground forest biomass estimation. In particular, based on the forest inventory data of Hangzhou in China, the Random Forest (RF), Convolutional Neural Network (CNN) and Convolutional Neural Networks Long Short-Term Memory Networks (CNN-LSTM) algorithms were deployed to construct the forest biomass estimation models, respectively. The estimate accuracies were evaluated under the different configurations of images and methods. The results show that for the SAR data, ALOS-2 has a higher biomass estimation accuracy than the GaoFen-3 and Sentinel-1. Moreover, the GaoFen-6 data is slightly worse than Sentinel-2 and Landsat-8 optical data in biomass estimation. In contrast with the single source, integrating multisource data can effectively enhance accuracy, with improvements ranging from 5% to 10%. The CNN-LSTM generally performs better than CNN and RF, regardless of the data used. The combination of CNN-LSTM and multisource data provided the best results in this case and can achieve the maximum R2 value of up to 0.74. It was found that the majority of the biomass values in the study area in 2018 ranged from 60 to 90 Mg/ha, with an average value of 64.20 Mg/ha. [ABSTRACT FROM AUTHOR]

Thermodynamic and liquid water profiles can be retrieved by a ground-based microwave radiometer (MWR) in nearly all weather conditions, which is useful for detecting mesoscale phenomena. This paper reviews the advances in remote sensing of atmospheric profiles and cloud properties by MWR in central China. Comparative studies indicate that MWR retrieval accuracy is different under various skies, especially those that decay under precipitation. The off-zenith method is proven to be capable of reducing the impact of precipitation and snow on MWR retrieval accuracy. Application studies demonstrate that MWR retrievals are helpful for early warning of rainstorms, hailstorms, and thunderstorms. Moreover, MWR retrievals provide a way to study cloud properties. The temporal variations of cloud occurrence frequency (COF) and liquid water path (LWP) are different for low, middle, and high clouds, and the vertical distribution of COF is also different in autumn and other seasons. Note that MWR can infer valid retrievals over the eastern Tibetan Plateau due to the weak precipitation over there. Also, cloud properties over the eastern Tibetan Plateau present differences from those over central China, and this is related to the different characteristics of atmospheric water vapor between these two regions. To bring more benefits for mechanism study and early warning of severe weather and numerical weather prediction, the decayed accuracy of MWR zenith retrievals under precipitation should be resolved. And combining MWR with other instruments is necessary for MWR application in detecting multi-layer clouds and ice clouds. [ABSTRACT FROM AUTHOR]

Land desertification is a key environmental problem in China, especially in Northwest China, where it seriously affects the sustainable development of natural resources. In this paper, we combine high-resolution satellite remote sensing images and UAV (unmanned aerial vehicle) visible light images to extract desert vegetation data and quickly locate and accurately monitor land desertification in relevant areas according to changes in vegetation coverage. Due to the strong light and dry climate of deserts in Northwest China, which results in deeper vegetation shadow texture and mostly dry shrubs with fewer stems and leaves, the accuracy of the vegetation index commonly used in visible remote sensing image classification is not able to meet the requirements for monitoring and evaluating land desertification. For this reason, in this paper, we took the Hangjin Banner in Bayannur as an example and constructed a new vegetation index, the HSVGVI (hue–saturation–value green enhancement vegetation index), based on the HSV (hue–saturation–value) color space using channel enhancement that can improve the extraction accuracy of desert vegetation and reduce misclassification. In addition, in order to further test the extraction accuracy, samples of densely vegetated and multi-shaded areas were divided in the study area according to the accuracy-influencing factors. At the same time, the HSVGVI was compared with the vegetation indices EXG (excess green index), RGBVI (red–green–blue vegetation index), MGRVI (modified green–red vegetation index), NGBDI (normalized green–red discrepancy index), and VDVI (visible-band discrepancy vegetation index) constructed based on the RGB (red–green–blue) color space. The experimental results show that the extraction accuracy of the EXG and other vegetation indices constructed in RGB color space can only reach 70%, while the extraction accuracy of the HSVGVI can reach more than 95%. In summary, the HSVGVI proposed in this paper can better realize the extraction of desert vegetation data and can provide a reliable technical tool for monitoring and evaluating land desertification. [ABSTRACT FROM AUTHOR]

Permafrost is a significant part of the cryosphere, which has gained increasing attention from scientists, policy-makers, and the general public due to global warming, environmental degradation, water shortages, and intense human activities. Although many permafrost research review articles have been published, these studies were predominantly limited to either one subject or one field, while systematic studies about permafrost based on bibliometric analysis methods remain limited. We aim to fill this gap by conducting a bibliometric analysis of 13,697 articles in the field of permafrost research from 1942 to 2021, collected from the Web of Science core collection database. The results indicate that permafrost research is a typically multi-author, multi-country, and multi-institution cooperative field, involved in many research fields. The cumulative number of publications has presented an exponential increase over the past 80 years, with an average annual growth rate of 10.40%. Since 2000, China has seen a rapid growth in the number of publications per year, surpassing the USA in 2016 and leading in the years since then. In addition, the authors from China have great contributions in publications, and there is good room for permafrost development in the future according to the authors' M-index ranking. After the analysis of authors' keywords, we found that, compared to the conventional methods, machine learning and interferometric synthetic aperture radar (InSAR) are new technological approaches introduced in recent years, and the Qinghai–Tibet Plateau has become a popular study area. The results presented here can help related researchers, scholars, and students in the field to better understand the past developments, current status, and future trends of permafrost research. Furthermore, this paper presents and expands the general process of the bibliometric method used in permafrost studies, which can provide researchers with new inspirations and improve discipline research approach. [ABSTRACT FROM AUTHOR]

Weather forecasting requires a comprehensive analysis of various types of meteorology data, and with the wide application of deep learning in various fields, deep learning has proved to have powerful feature extraction capabilities. In this paper, from the viewpoint of an image semantic segmentation problem, a deep learning framework based on semantic segmentation is proposed to nowcast Cloud-to-Ground and Intra-Cloud lightning simultaneously within an hour. First, a dataset with spatiotemporal features is constructed using radar echo reflectivity data and lightning observation data. More specifically, each sample in the dataset consists of the past half hour of observations. Then, a Light3DUnet is presented based on 3D U-Net. The three-dimensional structured network can extract spatiotemporal features, and the encoder–decoder structure and the skip connection can handle small targets and recover more details. Due to the sparsity of lightning observations, a weighted cross-loss function was used to evaluate network performance. Finally, Light3DUnet was trained using the dataset to predict Cloud-to-Ground and Intra-Cloud lightning in the next hour. We evaluated the prediction performance of the network using a real-world dataset from middle China. The results show that Light3DUnet has a good ability to nowcast IC and CG lightning. Meanwhile, due to the spatial position coupling of IC and CG on a two-dimensional plane, predictions from summing the probabilistic prediction matrices will be augmented to obtain accurate prediction results for total flashes. [ABSTRACT FROM AUTHOR]

Eucalyptus plantation forests in southern China provide not only the economic value of producing timber, but also the ecological value service of absorbing carbon dioxide and releasing oxygen. Based on the theory of spatial colonial modeling, this paper proposes a new method for 3D reconstruction of tree terrestrial LiDAR point clouds for determining the aboveground carbon stock of eucalyptus monocotyledons, which consists of the main steps of tree branch and trunk separation, skeleton extraction and optimization, 3D reconstruction, and carbon stock calculation. The main trunk and branches of the tree point clouds are separated using a layer-by-layer judgment and clustering method, which avoids errors in judgment caused by sagging branches. By optimizing and adjusting the skeleton to remove small redundant branches, the near-parallel branches belonging to the same tree branch are fused. The missing parts of the skeleton point clouds were complemented using the cardinal curve interpolation algorithm, and finally a real 3D structural model was generated based on the complemented and smoothed tree skeleton expansion. The bidirectional Hausdoff distance, average Hausdoff distance, and F distance were used as evaluation indexes, which were reduced by 0.7453 m, 0.0028 m, and 0.0011 m, respectively, and the improved spatial colonization algorithm enhanced the accuracy of the reconstructed tree 3D structural model. To verify the accuracy of our method to determine the carbon stock and its related parameters, we cut down 41 eucalyptus trees and destructively sampled the measurement data as reference values. The R2 of the linear fit between the reconstructed single-tree aboveground carbon stock estimates and the reference values was 0.96 with a CV(RMSE) of 16.23%, the R2 of the linear fit between the trunk volume estimates and the reference values was 0.94 with a CV(RMSE) of 19.00%, and the R2 of the linear fit between the branch volume estimates and the reference values was 0.95 with a CV(RMSE) of 38.84%. In this paper, a new method for reconstructing eucalyptus carbon stocks based on TLS point clouds is proposed, which can provide decision support for forest management and administration, forest carbon sink trading, and emission reduction policy formulation. [ABSTRACT FROM AUTHOR]

Lanzhou City is located in the semi-arid region of northwest China, which experiences serious desertification. Moreover, the high intensity of land development, with the accelerated industrialization and urbanization, causes increasingly aggravated conflict between humans and the environment. Exploring the response of the ecological environment quality to the natural environment and anthropogenic activities is important to protect the sustainable development of urban economic construction and the environment. Based on the Google Earth Engine (GEE) platform, this paper constructed a modified Remote Sensing Ecological Index (MRSEI) model which could reflect the ecological environment quality by integrating the desertification index (DI) into the Remote Sensing Ecological index (RSEI) model. This paper explores the spatiotemporal variation in the environmental quality from 2000 to 2020 in Lanzhou, China, and analyzes the natural and anthropogenic factors affecting the environment quality in terms of temperature, precipitation, gross domestic product (GDP), land use, night lighting, and population. The results showed that the mean value of MRSEI ranged from 0.254 to 0.400. The area undergoing fast growth in ecological quality was in the northwestern part of Lanzhou, and the area of decrease was in the central part. Various factors have different degrees of influence on the ecosystem, with temperature, precipitation, and land use having a greater impact, and GDP and population having a limited impact. Precipitation and temperature showed a strong impact when interacting with other factors, demonstrating that precipitation and temperature were also key factors affecting MRSEI. Overall, climate change and the implementation of ecological restoration projects have led to an improvement in the quality of the ecological environment in Lanzhou. This study provides a reference for understanding the spatiotemporal changes in the ecological environment in semi-arid Lanzhou and is conducive to formulating proper protection strategies. [ABSTRACT FROM AUTHOR]

Heritage corridors are methods to effectively protect and utilize linear cultural heritage based on the concept of regional conservation. The construction of a heritage corridor system is extremely important to preserve the natural environment of the heritage corridor area as well as the history and culture alongside. The majority of the research on the construction of heritage corridors heretofore focused on the generation of corridors, whereas studies on the classification of corridors are relatively limited, without a complete system for the construction of heritage corridors. Therefore, this paper aimed to (1) establish a comprehensive system for the construction of heritage corridors, (2) provide new ideas for the construction of heritage corridors, and (3) guide the scientific development of heritage corridors combining conservation and tourism. In the first place, the minimum cumulative resistance (MCR) model was applied to analyze the spatial structure of the study area and explore site selection of the heritage corridors; secondly, spatial syntax was used to measure the heritage corridors and determine the level of the heritage corridors; last but not least, the kernel density analysis was used to classify the types of heritage corridors. The present study shows that the heritage corridor system is built in a scientific approach, covering all aspects including construction, protection, and development. [ABSTRACT FROM AUTHOR]

With the comprehensive promotion of digital construction in China, cameras scattered throughout the country are of great significance in obtaining first-hand data. However, their potential role is limited due to the lack of georeference information on current surveillance cameras. Provided surveillance camera images and real scenes are combined and given georeference information, this problem can be solved, allowing cameras to generate significant social benefits. This article proposed an accurate registration method based on misalignment calibration and least squares matching between real scene and surveillance camera images to address this issue. Firstly, it is necessary to convert the navigation coordinate system from which cameras obtain data to the photogrammetric coordinate system and then solve for the misalignment and internal orientation elements of the camera. Then, accurate registration is achieved using the least squares matching on pyramid images. The experiment obtained surrounding image data of two common scenes with lens pitch angles of 45°, 55°, 65°, 75°, and 85° using the surveillance camera and obtained a 3D real scene model of each scene using a low-altitude aircraft. The experiment results show that the proposed method in this paper can achieve the expected goals of accurately matching real scene and surveillance camera images and assigning georeference information. Through extensive data analysis, the success rate and accuracy rate of registration are 98.1% and 97.06%, respectively. [ABSTRACT FROM AUTHOR]

In this paper, multi-source observation, such as aircraft, ground-based remote sensing, and satellite-retrieved data, has been utilized to compare and analyze the vertical characteristics of aerosol optical properties and the planetary boundary layer height (HPBL) over the North China Plain (NCP) region during May–June 2016. Aircraft observations show the vertical profiles of aerosol absorption coefficients (σabs), scattering coefficients (σsca), and extinction coefficients (σext) gradually decrease with altitude, with their maximum values near HPBL. The vertical profiles of σext depended most on the vertical distribution of measured σsca, indicating a significant contribution of scattering aerosols. In addition, the prominent characteristic of the inverse relationship between σext and moisture profile could serve as a reference for predicting air quality in the NCP region. The lower layer pollution during the field experiment was likely caused by the accumulation of fine-mode aerosols, characterized by the vertical distribution of the Ångström exponent and the Aerosol Robotic Network (AERONET) products. Typically, HPBL derived from aircraft and surface Micro Pulse Lidar (MPL) was approximate, while the predicted HPBL by meteorological data indicates an underestimation of ~192 m. Aerosol optical depth (AOD) calculated from aircraft and ground-based remote sensing (such as MPL and AERONET) experienced a strong correlation, and both of them exhibited a similar tendency. However, the AOD retrieved from satellites was significantly larger than that from aircraft and ground-based remote sensing. Overall, the inversion algorithm, cloud identification algorithm, representativeness of the space, and time of the observation may lead to an overestimation or underestimation of AOD under certain circumstances. This study may serve as a re-evaluation of AOD retrieved from multi-source observations and provide a reference to uncover the actual atmospheric environment in the NCP regions. [ABSTRACT FROM AUTHOR]

Mountainous terrains are typical over southeast China, with complex and diverse topography, large terrain undulations, rich geographic features, and meteorological variations. Previous studies show that ERA5 meteorological variables are generally accurate with respect to large plains or urban agglomerations, while their applicability to mountainous areas remains inconclusive. In this paper, using high-precision measurements probed by ground-based remote sensing instruments in May–July 2023 at a typical mountainous Shanghuang site in southeast China, the vertical accuracy of the ERA5 reanalysis datasets were comparatively evaluated. Our findings depict that the horizontal wind speeds of the ERA5 reanalysis data show a good performance compared to the Doppler lidar observations. In quantitative terms, ERA5 horizontal wind speeds are about 8% higher than the observed values below a height of 400 m, while above 400 m, an increasing negative bias is observed along as altitude increases. Differing from the horizontal wind speeds, there is a large discrepancy in the vertical wind speeds between the ERA5 and the observations, with a deviation of −150% to 40%. In terms of the thermal variables, the temperature extracted from ERA5 are consistent with the measurements in the low troposphere. Nevertheless, large systematic errors occur at 2000–3000 m, and the overall presentation shows that the errors gradually increase with the increase in altitude. Concerning the relative humidity, the general trend in ERA5 is similar to that observed by the microwave radiometer, but the relative errors from 500 to 2500 m range from 40% to 100%. This study also reveals that ERA5 is poorly representative and requires further improvements during extreme weather events such as rainstorms and typhoons. In particular, the horizontal wind speeds at the middle and lower levels deviate strongly from the observations. Given the importance of atmospheric thermodynamic stratifications in terms of both environmental and climatic issues, the results expand the application of the ERA5 reanalysis datasets in the mountainous areas of southeast China. More importantly, it provides credible reference data for the meteorological predictions and climate modelings in the southeast China mountainous region. [ABSTRACT FROM AUTHOR]

A trend in the development of spaceborne Synthetic Aperture Radar (SAR) technology is the shift from a single-satellite repeated observation mode to a multi-satellite collaborative observation mode. However, current multi-satellite collaborative geolocation algorithms face challenges, such as geometric model mismatch and poor baseline estimation accuracy, arising from highly dynamic changes among multi-satellites. This paper introduces a high-precision and efficient geolocation algorithm for a spaceborne bistatic interferometric SAR (BiInSAR) system based on an improved range–Doppler (IRD) model. The proposed algorithm encompasses three key contributions. Firstly, a comprehensive description of the spatial baseline geometric model unique to the bistatic configuration is provided, with a specific focus on deriving the perpendicular baseline expression. Secondly, IRD geolocation functions are established to meet the specific requirements of the bistatic configuration. Then, a novel BiInSAR geolocation algorithm based on the IRD's functions is proposed, which can significantly improve the target geolocation accuracy by modifying the range–Doppler equation to suit the bistatic configuration. Meanwhile, a low-coupling parallel calculation method is proposed, which can improve the calculation speed by two to three times. Finally, the accuracy and efficiency of the algorithm are demonstrated using experimental data acquired by the TH-2 satellite, which is China's first spaceborne BiInSAR system. The experimental results prove that the IRD algorithm exhibits geolocation accuracy with an average error of less than 1 m and a standard deviation of less than 2.5 m while maintaining computational efficiency at a calculation speed of 1,429,678 pixels per second. [ABSTRACT FROM AUTHOR]

In typical alteration extraction methods, e.g., band math and principal component analysis (PCA), the bands or band combinations unitized to extract altered minerals are usually selected based on empirical models or previous rules. This results in significant differences in the alteration of mineral mapping even in the same area, thus greatly increasing the uncertainty of mineral resource prediction. In this paper, an intelligent alteration extraction approach was proposed in which an optimization algorithm, i.e., a genetic algorithm (GA), was introduced into the PCA; this approach is termed GA-PCA and is used for selecting the optimized band combinations of mineralized alterations. The proposed GA-PCA was employed to map iron oxides and hydroxyl minerals using the most commonly adopted multispectral data, i.e., Landsat-8 OLI data, at the Lalingzaohuo polymetallic deposits, China. The results showed that the spectral characteristics of GA-PCA-selected OLI band combinations in the research area were beneficial for enhancing alteration information and were more capable of suppressing the interference of vegetation information. The mapping alteration zones using the GA-PCA approach had a higher agreement with known ore spots, i.e., 25% and 33.3% in ferrous-bearing and hydroxyl-bearing deposits, compared to the classical PCA. Furthermore, two predicted targets (not shown in the classical PCA results) were precisely obtained via analyzing the GA-PCA alteration maps combined with the ore-forming geological conditions of the mine and its tectonic characteristics. This indicated that the intelligent selection of mineral alteration band combinations increased the reliability of remote sensing-based mineral exploration. [ABSTRACT FROM AUTHOR]

Underground coal-mining-induced ground subsidence deformation is a common geological disaster impacting buildings, transportation and water supplies. Models predicting ground subsidence dynamically with high precision are important for the prevention of damage derived from ground subsidence. In this paper, the Hook function is utilized to develop a model describing the velocity of ground subsidence due to underground coal mining. Based on the subsidence velocity model, a dynamic subsidence model is established by taking an integral of the velocity model. Coefficients of the model, which depend on maximum subsidence, maximum subsidence velocity and the time corresponding to the maximum subsidence velocity, are related to the geological and mining conditions of the coal seam being investigated. A Levenberg–Marquardt-algorithm-based method is also proposed to calculate the optimal model coefficients based on subsidence velocity observations. Four continuously operating Global Navigation Satellite System (GNSS) stations were constructed above a typical longwall coal mining working face in the Jining mining area, China. These GNSS stations collected subsidence observations over two years, which were used to validate the developed prediction model. The results show that the root-mean-square (RMS) of the model-predicted ground subsidence error is 56.1 mm, and the maximum relative error is 2.5% for all four GNSS stations, when the ground subsidence is less than 6000 mm. [ABSTRACT FROM AUTHOR]

Long-distance water transfer is a critical engineering measure to rectify disparities in water resource distribution across regions. The effective operation and safety of such projects are paramount to their success, as localized issues can have cascading consequences, potentially disrupting the entire network. Conventional ground-based monitoring methods have limitations in measuring the deformation of large-scale structures. In this paper, InSAR is employed to monitor the deformation of the Shuangwangcheng (SWC) Reservoir, which features a long embankment dam as part of the South-to-North Water Diversion Project in China. We utilize data from both Sentinel-1 and TerraSAR-X satellites to derive 7-year deformation. Results reveal that the entire dam experiences continuous subsidence, with the maximum deformation in the line-of-sight direction measuring ~160 mm. While minor differential settlements are noted in different sections of the dam, the gradient is not significant due to the dam's substantial length. The InSAR deformation results from multiple geometries demonstrate good consistency, with the highest correlation observed between the Sentinel-1 ascending and descending datasets, exceeding 0.9. Validation against the GNSS observations of the three sites on the SWC Dam shows the accuracy of InSAR displacements is ~8 mm. Water level changes do impact deformation, but consolidation settlement appears to be the primary controlling factor during the monitoring period. This study underscores the potential of InSAR in long-distance water transfer projects and highlights that spatially continuous deformation is the most significant advantage. [ABSTRACT FROM AUTHOR]

Forest stock volume is the main factor to evaluate forest carbon sink level. At present, the combination of multi-source remote sensing and non-parametric models has been widely used in FSV estimation. However, the biodiversity of natural forests is complex, and the response of the spatial information of remote sensing images to FSV is significantly reduced, which seriously affects the accuracy of FSV estimation. To address this challenge, this paper takes China's Baishanzu Forest Park with representative characteristics of natural forests as the research object, integrates the forest survey data, SRTM data, and Landsat 8 images of Baishanzu Forest Park, constructs a time series dataset based on survey time, and establishes an FSV estimation model based on the CNN-LSTM-Attention algorithm. The model uses the convolutional neural network to extract the spatial features of remote sensing images, uses the LSTM to capture the time-varying characteristics of FSV, captures the feature variables with a high response to FSV through the attention mechanism, and finally completes the prediction of FSV. The experimental results show that some features (e.g., texture, elevation, etc.) of the dataset based on multi-source data feature variables are more effective in FSV estimation than spectral features. Compared with the existing models such as MLR and RF, the proposed model achieved higher accuracy in the study area (R2 = 0.8463, rMSE = 26.73 m3/ha, MAE = 16.47 m3/ha). [ABSTRACT FROM AUTHOR]

As a major grain-producing region in China, the North China Plain (NCP) faces serious challenges such as water shortage and land subsidence. In late 2014, the Central Route of the South-to-North Water Diversion Project (SNWD-C) began to provide NCP with water resources. However, the effectiveness of this supply in mitigating land subsidence remains a pivotal and yet unassessed aspect. In this paper, we utilized various geodetic datasets, including the Gravity Recovery and Climate Experiment (GRACE) and GRACE Follow On (GRACE-FO), Global Navigation Satellite System (GNSS) and leveling data, to conduct a spatial-temporal analysis of the equivalent water height (EWH) and vertical ground movement in the NCP. The results reveal a noteworthy decline in EWH from 2011 to 2015, followed by a slight increase with minor fluctuations from 2015 to 2020, demonstrating a strong correlation with the water resources supplied by the SNWD-C. The GRACE-derived surface deformation rate induced by hydrological loading is estimated to be <1 mm/yr. In comparison, GNSS-derived vertical ground movements exhibit considerable regional differences during the 2011–2020 period. Substantial surface subsidence is evident in the central and eastern NCP, contrasting with a gradual uplift in the front plain of the Taihang Mountains. Three-stage leveling results indicate that the rate of subsidence in the central and eastern plains is gradually increasing with the depression area expanding from 1960 to 2010. Based on these geodetic results, it can be inferred that the SNWD-C's operation since 2014 has effectively mitigated the reduction in terrestrial water storage in the NCP. However, land subsidence in the NCP persists, as the subsidence rate does not turn around in sync with the change in EWH following the operation of SNWD-C. Consequently, it's necessary to maintain and enforce existing policies, including controlling groundwater exploitation and water resources supply (e.g., SNWD-C) to curtail the exacerbation of land subsidence in the NCP. Additionally, continuous monitoring of land subsidence by GRACE, GNSS, leveling and other geodetic techniques is crucial to enable timely policy adjustments based on monitoring results. [ABSTRACT FROM AUTHOR]

Landslides are common natural disasters that cause serious damage to ecosystems and human societies. To effectively prevent and mitigate these disasters, an accurate assessment of landslide hazards is necessary. However, most traditional landslide hazard assessment methods rely on static assessment factors while ignoring the dynamic changes in landslides, which may lead to false-positive errors in the assessment results. This paper presents a novel landslide hazard assessment method for the Zagunao River basin, China. In this study, an updated landslide inventory was obtained for the Zagunao River basin using data from interferometric synthetic aperture radar (InSAR) and optical images. Based on this inventory, a landslide susceptibility map was developed using a random forest algorithm. Finally, an evaluation matrix was created by combining the results of deformation rates from both ascending and descending data to establish a hazard level that considers surface deformation. The method presented in this study can reflect recent landslide hazards in the region and produce dynamic assessments of regional landslide hazards. It provides a basis for the government to identify and manage high-risk areas. [ABSTRACT FROM AUTHOR]

Ponds constitute a pivotal component of aquatic ecosystems. The aquatic ecosystem of the Huai River Basin (HRB) in China was once damaged by severe pollution, and numerous ponds in the basin have not been secured. In this paper, Shenqiu County, a typical county in HRB with many ponds, is selected. Based on high-resolution images with ALOS in 2010, GF-2 in 2016, and GF-1 in 2022, we employed discriminant analysis (DA), classification and regression tree, support vector machine, and random forest to extract the ponds based on object-oriented and further analyzed the spatial-temporal variations of the ponds in this county. The results of the DA in these three years exhibited a higher kappa coefficient (>0.7), and overall accuracy (>75%), signifying superior performance when compared to the other three methods. There were 4625, 5315, and 4748 ponds in 2010, 2016, and 2022, with a total area of 12.87, 11.99, and 9.37 km2, respectively. The number of ponds had a trend of rising in the initial period (2010–2016) and falling later (2016–2022), while the total area revealed a continuous decline. Meanwhile, these ponds showed a clustering phenomenon with three main clustering areas, and the scope of the clustering areas also changed to a certain extent from 2010 to 2022. Our study offers valuable methodological support for the ecological monitoring and management of water environments in regions characterized by a dense concentration of ponds. The crucial data related to ponds in this study will help inform both environmental and social development initiatives within the area. [ABSTRACT FROM AUTHOR]

In recent years, numerous ancient landslides initially triggered by historic earthquakes on the eastern Tibetan Plateau have been reactivated by fault activity and heavy rainfall, causing severe human and economic losses. Previous studies have indicated that short-term heavy rainfall plays a crucial role in the reactivation of ancient landslides. However, the deformation behavior and reactivation mechanisms of seasonal rainfall-induced ancient landslides remain poorly understood. In this paper, taking the Dandu ancient landslide as an example, field investigations, ring shear experiments, and interferometric synthetic aperture radar (InSAR) deformation monitoring were performed. The cracks in the landslide, formed by fault creeping and seismic activity, provide pathways for rainwater infiltration, ultimately reducing the shear resistance of the slip zone and causing reactivation and deformation of the Dandu landslide. The deformation behavior of landslides is very responsive to seasonal rainfall, with sliding movements beginning to accelerate sharply during the rainy season and decelerating during the dry season. However, this response generally lags by several weeks, indicating that rainfall takes time to infiltrate into the slip zone. These research results could help us better understand the reactivation mechanism of ancient landslides triggered by seasonal rainfall. Furthermore, these findings explain why many slope failures take place in the dry season, which typically occurs approximately a month after the rainy season, rather than in the rainy season itself. [ABSTRACT FROM AUTHOR]

This paper comprehensively analyzed two consecutive tornado events associated with heavy precipitation during the Mei-yu season (a period of continuous rainy weather that occurs in the middle and lower reaches of the Yangtze River in China from mid-June to mid-July each year) and detailed the formation and development process of the tornadoes using Doppler weather radar, wind profiler radar, ERA5 reanalysis data, ground automatic station data and other multi-source data. The results showed that: (1) Small-scale vortices were triggered and developed during the eastward movement of the low vortex, forming two tornadoes successively on the eastern section of the Mei-yu front. (2) The presence of a gap on the front side of the reflectivity factor profile indicated that strong incoming airflow entered the updraft. Mesocyclones were detected with decreasing heights and increasing shear strengths. The bottom height of the tornado vortex signature (TVS) dropped to 0.7 km, and the shear value increased to 55.4 × 10−3 s−1. Tornado debris signatures (TDSs) could be seen with a low cross-correlation coefficient (CC) value area of 0.85–0.9 in the mesocyclone. The difference between the lowest-level difference velocity (LLDV) and the maximum difference velocity (MXDV) reached the largest value when a tornado occurred. (3) The continuously enhanced low-level jet propagated downward to form a super-low-level jet, and the strong wind direction and wind speed convergence in the boundary layer created a warm, moist and unstable atmosphere in Suzhou. With the entrainment of dry air, the northwest dry jet and the southeast moist jet stimulated the formation of a miniature supercell. (4) The low-level vertical wind shear of 0–1 km increased significantly upon tornado occurrence, which was more conducive to the formation and intensification of horizontal vorticity tubes. Encountering updrafts and downdrafts, the vorticity tubes might have been stretched and intensified. The first lightning jumps appeared 15 min and 66 min earlier than the Kunshan Bacheng tornado and the Taicang Liuhe tornado. The Liuhe tornado occurred during the stage when the lightning frequency reached its peak and then fell back. [ABSTRACT FROM AUTHOR]

This article takes the measured Total Electron Content (TEC) from the GPS points of the China Regional Crust Observation Network as the starting point to establish a regional ionospheric empirical model. The model's performance is enhanced by considering solar flux and geomagnetic activity data. The refinement function model of the ionospheric TEC diurnal variation component, seasonal variation component, and geomagnetic component is studied. Using the nonlinear least squares method to fit undetermined coefficients, MEFM-ITCR (Multi-parameter Empirical Fusion Model–Ionospheric TEC China Regional Model) is proposed to forecast the regional ionosphere TEC in China. The results show that the standard deviation of MEFM-ITCR residuals is 3.74TECU, and MEFM-ITCR fits the modeling dataset well. Analyses of geographic location variation, seasonal variation, and geomagnetic disturbance were carried out for MEFM-ITCR performance. The results indicate that in the Chinese region, MEFM-ITCR outperforms IRI2020 and NeQuick2 models in terms of forecast accuracy, linear correlation, and model precision for TEC measured using GPS points under different latitudes and longitudes, different seasons, and different geomagnetic disturbances. The empirical TEC model built for the Chinese region in this paper provides a new ionospheric delay correction method for GNSS single frequency users and is of great significance for establishing other new and improving existing ionospheric empirical models. [ABSTRACT FROM AUTHOR]

Desertification greatly threatens the ecological environment and sustainable development over approximately 30% of global land. In this study, the contributions of climate drivers and human activity in shaping the desertification process from 1984 to 2014 were quantified in the desertification-prone region (DPR) in Northern China (NC) by employing net primary productivity (NPP) as a proxy. The results reveal that 72.74% of the DPR experienced desertification mitigation and 27.26% experienced exacerbation. Climate drivers acted as primary drivers, contributing to both the mitigation (47.2%) and exacerbation (48.5%) of desertification, while human activity also played a crucial role, with contributions of 39.6% to mitigation and 41.0% to exacerbation of desertification. Furthermore, a shift in desertification dynamics emerged around 2000, with climate drivers promoting the mitigation process (66.8%), and precipitation was a dominant climatic factor for the mitigation of desertification after 2000, which was related to internal atmospheric variability. This study highlights changes in the contributions of different factors to desertification, underscoring the need for policy adjustment to attain sustainable land management in NC. [ABSTRACT FROM AUTHOR]

Monitoring mine activities can help management track the status of mineral resource exploration and mine rehabilitation. It is crucial to the sustainable development of the mining industry and the protection of the geological environment in mining areas. To monitor the mining activities of shallow surface outcrops in the arid and semi-arid regions of northwest China, this paper proposes a remote sensing monitoring approach of mining activities based on deep learning and integrated interferometric synthetic aperture radar technique. This approach uses the DeepLabV3-ResNet model to identify and extract the spatial location of the mine patches and then uses object-oriented analysis and spatial analysis methods to optimize the mine patch boundaries. SBAS-InSAR technique is used to obtain the time-series deformation information of the mine patches and is combined with the multi-temporal optical imagery to analyze the mining activities in the study area. The proposed approach has a recognition accuracy of 95.80% for the identification and extraction of mine patches, with an F1-score of 0.727 at the pixel level, and the average area similarity for all patches is 0.78 at the object-oriented level. The proposed approach possesses the capability to analyze mining activities, indicating promising prospects for engineering applications. It provides a reference for monitoring mining activities using multisource satellite remote sensing. [ABSTRACT FROM AUTHOR]

Against the background of global warming, permafrost areas are facing increasing thawing, and the threat to the surface of the Qinghai–Tibet Engineering Corridor (QTEC) is serious. It is imperative to understand the current surface deformation and analyze the changes spatiotemporal characteristics for future warnings. At present, observation of a long time series and overall coverage of vertical ground deformation in QTEC are lacking. This paper takes the permafrost deformation of the QTEC as its research object. It uses the pretreated LiCSAR product and combines it with the LiCSBAS package to obtain monitoring results of the long time series deformation of the engineering corridor's surface. The SAR image acquisition date is taken as the constraint, the results covering the whole processing area are selected, and then the vertical deformation information covering the entire engineering corridor area by ignoring the north–south displacement is calculated. The results show that the surface of the study area, as a whole, slightly subsided between May 2017 and March 2022, and the vertical deformation rate was mostly distributed at −27.068 mm/yr − 18.586 mm/yr, with an average of −1.06 mm/yr. Vertical deformation dominated at 52.84 percent of the study area, of which settlement accounted for 27.57 percent and uplift accounted for 25.27 percent. According to the statistics of the normal distribution of deformation velocity per pixel, a total of 77% of the engineering corridor was stable, with a vertical deformation rate between −6.964 mm/yr and −4.844 mm/yr, and 17.7% of the region was sub-stable, with a settling rate of −12.868 mm/yr − –6.964 mm/yr. The unstable regions included areas with settlement rates greater than 12.868 mm/yr and uplift rates greater than 10.748 mm/yr, representing 4.4 percent and 0.9 percent of the total area, respectively, for a total of 5.3 percent. The results of this paper can be used as the theoretical basis and as basic data for decision making and scientific research in various departments, and they are of great significance for surface stability assessment and early warnings along engineering corridors and traffic projects. [ABSTRACT FROM AUTHOR]

The continuous increase in the volume of geospatial data has led to the creation of storage tools and the cloud to process data. Google Earth Engine (GEE) is a cloud-based platform that facilitates geoprocessing, making it a tool of great interest to the academic and research world. This article proposes a bibliometric analysis of the GEE platform to analyze its scientific production. The methodology consists of four phases. The first phase corresponds to selecting "search" criteria, followed by the second phase focused on collecting data during the 2011 and 2022 periods using Elsevier's Scopus database. Software and bibliometrics allowed to review the published articles during the third phase. Finally, the results were analyzed and interpreted in the last phase. The research found 2800 documents that received contributions from 125 countries, with China and the USA leading as the countries with higher contributions supporting an increment in the use of GEE for the visualization and processing of geospatial data. The intellectual structure study and knowledge mapping showed that topics of interest included satellites, sensors, remote sensing, machine learning, land use and land cover. The co-citations analysis revealed the connection between the researchers who used the GEE platform in their research papers. GEE has proven to be an emergent web platform with the potential to manage big satellite data easily. Furthermore, GEE is considered a multidisciplinary tool with multiple applications in various areas of knowledge. This research adds to the current knowledge about the Google Earth Engine platform, analyzing its cognitive structure related to the research in the Scopus database. In addition, this study presents inferences and suggestions to develop future works with this methodology. [ABSTRACT FROM AUTHOR]

The analysis of marine environmental parameters plays a significant role in various aspects, including sea surface target detection, the monitoring of the marine ecological environment, marine meteorology and disaster forecasting, and the monitoring of internal waves in the ocean. In particular, for sea surface target detection, the accurate and high-resolution input of marine environmental parameters is crucial for multi-scale sea surface modeling and the prediction of sea clutter characteristics. In this paper, based on the low-resolution wind speed, significant wave height, and wave period data provided by ECMWF for the surrounding seas of China (specified latitude and longitude range), a deep learning model based on a residual structure is proposed. By introducing an attention module, the model effectively addresses the poor modeling performance of traditional methods like nearest neighbor interpolation and linear interpolation at the edge positions in the image. Experimental results demonstrate that with the proposed approach, when the spatial resolution of wind speed increases from 0.5° to 0.25°, the results achieve a mean square error (MSE) of 0.713, a peak signal-to-noise ratio (PSNR) of 49.598, and a structural similarity index measure (SSIM) of 0.981. When the spatial resolution of the significant wave height increases from 1° to 0.5°, the results achieve a MSE of 1.319, a PSNR of 46.928, and an SSIM of 0.957. When the spatial resolution of the wave period increases from 1° to 0.5°, the results achieve a MSE of 2.299, a PSNR of 44.515, and an SSIM of 0.940. The proposed method can generate high-resolution marine environmental parameter data for the surrounding seas of China at any given moment, providing data support for subsequent sea surface modeling and for the prediction of sea clutter characteristics. [ABSTRACT FROM AUTHOR]

This paper utilizes high-resolution ERA5 hourly data from 1980 to 2020 and long-term normalized difference vegetation index (NDVI) time series obtained from remote sensing and applies trend analysis, correlation analysis, lag analysis, and other methods to study the spatiotemporal characteristics of extreme rainfall at daily and hourly scales in the Huang-Huai-Hai Plain. The paper explores the NDVI's variability and its relationship with extreme hourly precipitation and analyzes the main factors affecting it. The study made the following observations: (1) The extreme daily precipitation in the Huang-Huai-Hai Plain shows a decreasing trend, with a 13.6 mm/yr reduction rate. In contrast, the proportion of extreme rainfall to total precipitation generally exceeds 20%, and the intensity of extreme rain has gradually increased. The spatial distribution pattern of extreme rainfall follows the distribution pattern of China's rain belts, with the terrain being an important influencing factor. The high-incidence areas for extreme rainfall are the Huaihe River region and the Shandong Peninsula. (2) The observed significant increase in hourly extreme precipitation events in the Shandong and Henan provinces of the Huang-Huai-Hai Plain has led to an increased risk of flooding, while the corresponding events in the northwest region of the Plain have exhibited a gradual weakening trend over time. (3) The extreme hourly precipitation in the Huang-Huai-Hai plain shows a frequent and scattered pattern, with decreasing intensity over time. Extreme precipitation mainly occurs in the first half of the night, especially between 19:00 and 21:00, with extreme hourly rainfall intensity fluctuating between 0.2 and 0.25 and the proportion of rainfall to total precipitation reaching as high as 10%. The spatial distribution of extreme hourly rainstorms during the peak period (19:00–21:00) exhibits a high rainfall volume, intensity, and frequency pattern in the eastern region, while the western part exhibits low rainfall volume, intensity, and frequency. (4) The incidence of extremely heavy rainfall in an hour has exhibited a more significant increase compared to extreme daily events in the Huang-Huai-Hai Plain, primarily in the form of backward-type precipitation. Hourly extreme precipitation events in the Huang-Huai-Hai Plain are affected by terrain and land use/cover change (LUCC), with the micro-topography of hilly areas leading to a concentrated distribution of precipitation and LUCC suppressing extreme precipitation events in arid climates. (5) At the ten-day scale, the spatial distribution of the NDVI shows a gradually increasing trend from northwest to southeast, with the highest NDVI value reaching up to 0.6 in the southern part of the study area. For extreme hourly precipitation, there is no significant change observed at the multi-year ten-day scale; while the NDVI in the northern and central parts of the Huang-Huai-Hai Plain shows a significant decreasing trend, in contrast, it presents a significant increasing trend in the southern region. (6) Finally, the correlation between NDVI at the ten-day scale and extreme hourly precipitation exhibits a decreasing pattern from north to south, with a correlation coefficient decreasing from 0.48 to 0.08. The lagged correlation analysis of extreme hourly rainfall and NDVI for one, two, and three ten-day periods shows that the lagged effect of extreme hourly precipitation on NDVI is negligible. Analyzing the correlation between extreme hourly rainfall and NDVI for different months, the impact of extreme hourly precipitation on NDVI is predominantly negative, except for June, which shows a positive correlation (0.35), passing the significance test. This study offers a scientific foundation for enhancing disaster warning accuracy and timeliness and strengthening the research on disaster reduction techniques. [ABSTRACT FROM AUTHOR]