Search

As an important complement and enhancement technique for cellular communication systems, the device-to-device (D2D) technique has exhibited a number of benefits in terms of, for instance, offering an improved spectral efficiency, enabling a reduced transmit power and providing an enhanced channel capacity, etc. However, a severe interference may be imposed on the conventional cellular users by the activated D2D links, thus, substantially eroding the performance of the former. In this paper, we propose an interference limited area (ILA) based D2D-management scheme along with an appropriately designed power control algorithm for mitigating the above-mentioned interference. We first derive the closed-form expressions of the average coverage probability for both the cellular and D2D links under the proposed ILA scheme, followed by proposing a resource-allocation algorithm subject to a power control mechanism. Numerical results show that the proposed ILA scheme is capable of outperforming the conventional scheme in terms of both the coverage probability (i.e., for both cellular and D2D links) and the sum data rate, particularly in the scenarios with a high D2D density and a high signal-to-interference-plus-noise ratio. [ABSTRACT FROM AUTHOR]

In the air–ground propagation channel, multipath propagation severely affects the performance of the communication, navigation, and surveillance systems used in civil aviation. To gain a deeper understanding of the air–ground channel, we are interested in the locations of objects causing multipath propagation. Therefore, in this paper we propose and experimentally validate an algorithm to localize reflectors causing multipath components based on channel sounding data collected using omnidirectional antennas. The algorithm relies on superresolution parameter estimation and tracking as well as on a localization algorithm. Using both simulations and channel sounding data collected from flight trials, we demonstrate the ability to reliably localize the reflectors causing multipath components. [ABSTRACT FROM AUTHOR]

With the advent of the Internet of things, massive machine-type communications (mMTC) have become one of the most important requirements for next generation communication systems. In the mMTC scenarios, grant-free nonorthogonal multiple access on the transmission side and compressive sensing-based multi-user detection (CS-MUD) on the reception side are a promising solution because many users sporadically transmit small data packets at low rates. In this paper, we propose a novel CS-MUD algorithm for the active user and data detection in the mMTC systems. The proposed scheme consists of the maximum a posteriori probability (MAP) based active user detector (MAP-AUD) and the MAP-based data detector (MAP-DD). By exchanging the extrinsic information between MAP-AUD and MAP-DD, the proposed algorithm improves the active user detection performance and the reliability of the data detection. In addition, we extend the proposed algorithm to exploit group sparsity. By jointly processing the multiple received data with common activity, the proposed algorithm dramatically enhances the active user detection performance. We show by numerical experiments that the proposed algorithm achieves a substantial performance gain over existing algorithms. [ABSTRACT FROM AUTHOR]

This paper considers a heavy loaded full-duplex (FD) small cell consisting of one FD base station and multiple half-duplex users where the number of subchannels is less than the number of uplink and downlink users. With the objective of maximizing the total sum-rate, a joint power allocation, and user pairing problem is formulated. To solve this problem, a novel decomposition method is proposed, which decouples the power allocation and user pairing problem into two subproblems. It is proven that the optimal solution of subproblems is the optimal solution of the original problem. Then, optimal algorithms are developed for the two subproblems. Numerical results show that the proposed algorithm achieves better performance compared with the baselines of the greedy algorithm and random pairing algorithm. [ABSTRACT FROM AUTHOR]

In this paper, we investigate the cross-layer resource optimization for wireless relay networks with dynamic node-selfishness information. The degree of intrinsic selfishness (DeIS) and the degree of extrinsic selfishness (DeES) of the relay node (RN) are defined as the effects of its own residual energy resource and the incentive in an incentive mechanism, respectively. A model of two-timescale node-selfishness dynamics is constructed to describe the time-varying characteristics of the RN's DeIS and DeES. Based on the two-timescale node-selfishness dynamics of the RNs, a two-timescale resource-optimization dynamical algorithm (TRODA) is employed to control the transmit powers of both RNs and end users (EU), as well as the flow rates of the data packets injected by all EUs. Meanwhile, the stability and the tracking error of the TRODA under the two-timescale node-selfishness dynamics are analyzed by Lyapunov theory. Our simulation results demonstrate that the two-timescale optimization algorithm is stable and has trivial tracking error. [ABSTRACT FROM AUTHOR]

The ability of mobile devices to be connected to more than one radio node at the same time enables mobile devices to transmit and receive traffic to and from multiple paths. This ability helps to increase the average mobile device data rate and to improve the network reliability. Load balancing among multiple paths become a key factor to avoid network congestion, nevertheless it requires efficient techniques to split traffic without adding more delay or generating too much packet reordering for delay-sensitive traffic. In this paper, we address two key issues in the context of uplink wireless mobile networks: 1) how to accurately split traffic among multiple paths and 2) how to minimize the end-to-end delay without increasing packet reordering. We propose delay-aware load balancing algorithm (DALBA), a novel strategy that splits traffic at the granularity of the packet. DALBA aims to minimize the splitting error (SE) and the end-to-end delay difference by effectively using all of the available paths. We analyze DALBA's performance through extensive simulations using H.264 video traffic. Numerical results demonstrate that DALBA outperforms previous algorithms in terms of SE, end-to-end delay and peak signal-to-noise ratio while keeping packet reordering to a suitable low value. [ABSTRACT FROM AUTHOR]

With the convergence of multimedia applications and wireless communications, there is a need to support real-time traffic in wireless networks. In general, real-time packets must be delivered before a certain delay upper bound. In the literature, feasible earliest due date (FEDD) is one of the scheduling algorithms proposed to provide packet delay upper bound guarantees over a time-varying wireless channel. However, FEDD is reactive with respect to changes in the wireless channel. In view of this, we propose a novel deadline-based scheduling algorithm called proactive earliest due date (PEDD), which dynamically adjusts a packet's deadline in anticipation of an upcoming change in the channel condition. Similar to FEDD, PEDD is idealistic, as they both assume the availability of the exact channel knowledge. This is not implementable and, thus, this paper further proposes a realistic version of PEDD, called R-PEDD. R-PEDD uses a probing mechanism to acquire the channel knowledge, which in turn is used for the packet deadline adjustment. Since probe packets consume bandwidth, a modified version of R-PEDD, called R-PEDD+ is proposed to derive the required channel information from recent packet transmissions. We have performed extensive simulations using OPNET to evaluate the performance of these proposed algorithms. In short, PEDD always outperforms a couple of existing algorithms in the literature. R-PEDD and R-PEDD+ are both capable of approximating the performance of the idealistic PEDD in a realistic wireless channel. However, their performance deteriorates with more rapid changes in the channel condition. [ABSTRACT FROM AUTHOR]

Device-free identification (DFI) is a promising technique, which could recognize human identity using his/her unique influence on surrounding wireless signals in a device-free and contact-free manner. It could maintain the privacy of a user and enable smart applications to provide customized service for a specific user. Despite its advantages over other person's identification systems, one fundamental problem to solve is that the accuracy of the DFI system is a little bit low due to the extremely noisy wireless measurements. The goal of this work is to explore and exploit a method to extract intrinsic features from the noisy channel state information (CSI) so as to realize high-performance DFI. To this end, we propose a novel empirical-mode-decomposition-based general DFI framework, which decomposes raw noisy CSI measurements into intrinsic mode functions (IMF) and extracts intrinsic features from the IMF components accordingly. Under the proposed framework, we also develop two DFI systems based on the respiration and gait biometric features. Extensive experiments carried out on commodity WiFi reveal that the developed systems could identify a person with an accuracy of over 90% from a group of ten persons. [ABSTRACT FROM AUTHOR]

Many emerging applications, such as security surveillance and smart healthcare, have incubated the device-free localization (DFL) technique, which could estimate the location of a target without equipping any device. However, current DFL system needs labor-intensive training to learn the influence of the target on surrounding wireless signals, so as to provide model parameters or radio maps for the location estimation algorithm. To address this issue, we develop a novel robust training-free DFL system, named DeFi, which could directly estimate the target location by refining the angle-of-arrival (AOA) of the target reflection path based on WiFi channel state information. We analyze the characteristics of the static paths and the motion paths, eliminate the static paths using a background elimination algorithm, and separate out the target reflection path from the motion paths according to the AOA and equivalent time-of-flight measurements. With the AOA of the target reflection path as observation information, we robustly estimate the target location based on a particle filter algorithm. We implement the proposed DeFi system on commodity off-the-shelf WiFi devices and validate its performance in two indoor scenarios. Experimental results show that DeFi achieves a median error of less than 0.6 m. [ABSTRACT FROM AUTHOR]