Search

Recently, the concept of cloud computing has been extended towards the network edge. Devices near the network edge, called fog nodes, offer computing capabilities with low latency to nearby end devices. In the resulting fog computing paradigm (also called edge computing), application components can be deployed to a distributed infrastructure, comprising both cloud data centers and fog nodes. The decision which infrastructure nodes should host which application components has a large impact on important system parameters like performance and energy consumption. Several algorithms have been proposed to find a good placement of applications on a fog infrastructure. In most cases, the proposed algorithms were evaluated experimentally by the respective authors. In the absence of a theoretical analysis, a thorough and systematic empirical evaluation is of key importance for being able to make sound conclusions about the suitability of the algorithms. The aim of this paper is to survey how application placement algorithms for fog computing are evaluated in the literature. In particular, we identify good and bad practices that should be utilized respectively avoided when evaluating such algorithms. [ABSTRACT FROM AUTHOR]

• We compare the performance of global metrics and their local variants in the identification of expert-selected milestone papers on two distinct citation datasets. • We obtain a family of local variants of PageRank (LeaderRank) with a tunable degree of locality and find they can generate highly correlated scores with the scores by the original metrics. • The local variants of PageRank (LeaderRank) perform similarly well as the original global PageRank (LeaderRank) algorithms in the identification of seminal papers. • The local variants of PageRank (LeaderRank) perform significantly better than local metrics such as citation count, h-index and semi-local centrality. • Compared to network-based global metrics, the proposed local estimates provide a better trade-off between performance and computational efficiency. Recent works aimed to understand how to identify "milestone" scientific papers of great significance from large-scale citation networks. To this end, previous results found that global ranking metrics that take into account the whole network structure (such as Google's PageRank) outperform local metrics such as the citation count. Here, we show that by leveraging the recursive equation that defines the PageRank algorithm, we can propose a family of local impact metrics. Our results reveal that the obtained PageRank-based local metrics outperform the citation count and other local metrics in identifying the seminal papers. Compared with global metrics, these local metrics can reach similar performance in the identification of seminal papers in shorter computational time, without requiring the whole network topology. Our findings could help to better understand the nature of groundbreaking research from citation network analysis and find practical applications in large-scale data. [ABSTRACT FROM AUTHOR]

A crucial field in software development and testing is Software Defect Prediction (SDP) because the quality, dependability, efficiency, and cost of the software are all improved by forecasting software defects at an earlier stage. Many existing models predict defects to facilitate software testing process for testers. A comprehensive review of these models from different perspectives is crucial to help new researchers enter this field and learn about its latest developments. Algorithms, method types, datasets, and tools were the only perspectives discussed in the current literature. A comprehensive study that takes into account a wide spectrum of viewpoints hasn't yet been published. Examining the development and advancement of SDP-related studies is the goal of this literature review. It provides a comprehensive and updated state-of-the-art that satisfies all stated criteria. Out of 591 papers retrieved from 6 reputable databases, 73 papers were eligible for analysis. This review addresses relevant research questions regarding techniques & method types, data details, tools, code syntax, semantics, structural and domain information. Motivation to conduct this comprehensive review is to equip the readers with the necessary information and keep them informed about the software defect prediction domain. [ABSTRACT FROM AUTHOR]

The paper "Well-behaved Online Load Balancing Against Strategic Jobs" by Li, Li and Wu considers a truthful online load-balancing problem with the objective of the makespan minimization on related machines. The 2019 workshop on models and algorithms for planning and scheduling problems was held in Renesse (The Netherlands). [Extracted from the article]

Smart communication has significantly advanced with the integration of the Internet of Things (IoT). Many devices and online services are utilized in the network system to cope with data gathering and forwarding. Recently, many traffic-aware solutions have explored autonomous systems to attain the intelligent routing and flowing of internet traffic with the support of artificial intelligence. However, the inefficient usage of nodes' batteries and long-range communication degrades the connectivity time for the deployed sensors with the end devices. Moreover, trustworthy route identification is another significant research challenge for formulating a smart system. Therefore, this paper presents a smart Random walk Distributed Secured Edge algorithm (RDSE), using a multi-regression model for IoT networks, which aims to enhance the stability of the chosen IoT network with the support of an optimal system. In addition, by using secured computing, the proposed architecture increases the trustworthiness of smart devices with the least node complexity. The proposed algorithm differs from other works in terms of the following factors. Firstly, it uses the random walk to form the initial routes with certain probabilities, and later, by exploring a multi-variant function, it attains long-lasting communication with a high degree of network stability. This helps to improve the optimization criteria for the nodes' communication, and efficiently utilizes energy with the combination of mobile edges. Secondly, the trusted factors successfully identify the normal nodes even when the system is compromised. Therefore, the proposed algorithm reduces data risks and offers a more reliable and private system. In addition, the simulations-based testing reveals the significant performance of the proposed algorithm in comparison to the existing work. [ABSTRACT FROM AUTHOR]

Abstract: The paper describes a system for executable papers for publishers enabling them to reuse content and to generate further advances of science and engineering. The executable algorithmic descriptions within a paper are presented in natural language sentences and basic code, thereby making long term compatibility absolute. Authors are required to use publicly numerical libraries on the Internet or references to publications with executable papers. As used by authors the system automatically creates a web of algorithmic knowledge on the Internet. Novelty of new algorithms in publications can be evaluated by automated tools available to authors, reviewers and readers of scientific papers published. [Copyright &y& Elsevier]

Abstract: This paper studies how missing data in the PageRank algorithm influences the result of papers ranking and proposes PrestigeRank algorithm on that basis. We make use of PrestigeRank to give the ranking of all papers in physics in the Chinese Scientific and Technology Papers and Citation Database (CSTPCD) published between 2004 and 2006. We compared PrestigeRank result with PageRank and citation ranking. We found PrestigeRank is significantly correlated with PageRank and citation counts. We also used paper citation networks to rank journals, and compared the result with that of journal citation networks. We proposed PR sum , PR ave , and compared both of them with citation counts and impact factor. It indicates PR sum , PR ave can reflect journal''s authority favorably. We also discuss the advantages and disadvantages, application scope and application prospects of PrestigeRank in the evaluation of papers and journals. [Copyright &y& Elsevier]

Technical terms are vital elements for understanding the techniques used in academic research papers, and in this paper, we use focused technical terms to explore technical trends in the research literature. The major purpose of this work is to understand the relationship between techniques and research topics to better explore technical trends. We define this new text mining issue and apply machine learning algorithms for solving this problem by (1) recognizing focused technical terms from research papers; (2) classifying these terms into predefined technology categories; (3) analyzing the evolution of technical trends. The dataset consists of 656 papers collected from well-known conferences on ACM. The experimental results indicate that our proposed methods can effectively explore interesting evolutionary technical trends in various research topics. [ABSTRACT FROM AUTHOR]

Copyright of Power & Electrical Engineering is the property of RTU Publishing House and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

To solve the problem of identifying similar questions in examination database, an algorithm for question similarity identification is proposed in this paper. By introducing domain words to the improvement of the word similarity model in HowNet, a model for question similarity identification is proposed to make the same or similar questions be identified and cut off automatically. This method improves the accuracy of identification compared with other methods. By combining merits of the random selection with those of the backtracking method, a new algorithm of generating papers automatically based on question similarity identification is proposed. It can guarantee the quality of papers. Test results show that the accuracy of question similarity identification of this method is 96% , which approaches to that of manual identification. This method can cut off similar questions not only of the same type, but also of different types. Finally, this method has been applied to the on-line examination of C programming language. [ABSTRACT FROM AUTHOR]

The traditional method for transformer moisture diagnosis is to establish empirical equations between feature parameters extracted from frequency domain spectroscopy (FDS) and the transformer’s moisture content. However, the established empirical equation may not be applicable to a novel testing environment, resulting in an unreliable evaluation result. In this regard, it is acknowledged that FDS combined with machine learning is more suitable for estimating moisture content in a variety of test environments. Nonetheless, the accuracy of the estimation results obtained using the existing method is limited by the algorithm’s inability to generalize. To address this issue, we propose an AdaBoost algorithm-enhanced back-propagation neural network (BP_AdaBoost). This study creates a database by extracting feature parameters from the FDS that characterize the insulation states of the prepared samples. Then, using the BP_AdaBoost algorithm and the newly constructed database, the moisture estimation models are trained. Finally, the results of the estimation are discussed in terms of laboratory and field transformers. By comparing the proposed BP_AdaBoost algorithm to other intelligence algorithms, it is demonstrated that it not only performs better in generalization, but also maintains a high level of accuracy. [ABSTRACT FROM AUTHOR]

The Semantic Link Network is a general semantic model for modeling the structure and the evolution of complex systems. Various semantic links play different roles in rendering the semantics of complex system. One of the basic semantic links represents cause-effect relation, which plays an important role in representation and understanding. This paper verifies the role of the Semantic Link Network in representing the core of text by investigating the contribution of cause-effect link to representing the core of scientific papers. Research carries out with the following steps: (1) Two propositions on the contribution of cause-effect link in rendering the core of paper are proposed and verified through a statistical survey, which shows that the sentences on cause-effect links cover about 65% of key words within each paper on average. (2) An algorithm based on syntactic patterns is designed for automatically extracting cause-effect link from scientific papers, which recalls about 70% of manually annotated cause-effect links on average, indicating that the result adapts to the scale of data sets. (3) The effects of cause-effect link on four schemes of incorporating cause-effect link into the existing instances of the Semantic Link Network for enhancing the summarization of scientific papers are investigated. The experiments show that the quality of the summaries is significantly improved, which verifies the role of semantic links. The significance of this research lies in two aspects: (1) it verifies that the Semantic Link Network connects the important concepts to render the core of text; and, (2) it provides an evidence for realizing content services such as summarization, recommendation and question answering based on the Semantic Link Network, and it can inspire relevant research on content computing. [ABSTRACT FROM AUTHOR]

Abstract: A lot of work has been done in the field of multi-valued model checking home and abroad. But some research works are not perfect. Some problems in the semantic definitions of temporal operators and corresponding model checking algorithms are found in the paper “Model Checking Using Partial Kripke Structure with 3-Valued Temporal Logic”. Some counterexamples are given to show these errors. On the basis of the discussion, some sound semantic definitions of temporal operators and correct algorithms of model checking for some temporal operators are given. [Copyright &y& Elsevier]

Thus, (3) treats the constraints HT ht and HT ht implicitly, and works solely with the auxiliary support variables I y i . [Extracted from the article]

Presents a study which showed how curve and surface representations of fiber network, fiber wall and fiber lumen can be computed using distance transform based algorithms. Motive for analyzing volume images of paper; Uses of the representations; Levels of detail in which the analysis of paper and paper fibers can be divided.

In the last 16 years, more than 200 research articles were published about research-paper recommender systems. We reviewed these articles and present some descriptive statistics in this paper, as well as a discussion about the major advancements and shortcomings and an overview of the most common recommendation concepts and approaches. We found that more than half of the recommendation approaches applied content-based filtering (55 %). Collaborative filtering was applied by only 18 % of the reviewed approaches, and graph-based recommendations by 16 %. Other recommendation concepts included stereotyping, item-centric recommendations, and hybrid recommendations. The content-based filtering approaches mainly utilized papers that the users had authored, tagged, browsed, or downloaded. TF-IDF was the most frequently applied weighting scheme. In addition to simple terms, n-grams, topics, and citations were utilized to model users' information needs. Our review revealed some shortcomings of the current research. First, it remains unclear which recommendation concepts and approaches are the most promising. For instance, researchers reported different results on the performance of content-based and collaborative filtering. Sometimes content-based filtering performed better than collaborative filtering and sometimes it performed worse. We identified three potential reasons for the ambiguity of the results. (A) Several evaluations had limitations. They were based on strongly pruned datasets, few participants in user studies, or did not use appropriate baselines. (B) Some authors provided little information about their algorithms, which makes it difficult to re-implement the approaches. Consequently, researchers use different implementations of the same recommendations approaches, which might lead to variations in the results. (C) We speculated that minor variations in datasets, algorithms, or user populations inevitably lead to strong variations in the performance of the approaches. Hence, finding the most promising approaches is a challenge. As a second limitation, we noted that many authors neglected to take into account factors other than accuracy, for example overall user satisfaction. In addition, most approaches (81 %) neglected the user-modeling process and did not infer information automatically but let users provide keywords, text snippets, or a single paper as input. Information on runtime was provided for 10 % of the approaches. Finally, few research papers had an impact on research-paper recommender systems in practice. We also identified a lack of authority and long-term research interest in the field: 73 % of the authors published no more than one paper on research-paper recommender systems, and there was little cooperation among different co-author groups. We concluded that several actions could improve the research landscape: developing a common evaluation framework, agreement on the information to include in research papers, a stronger focus on non-accuracy aspects and user modeling, a platform for researchers to exchange information, and an open-source framework that bundles the available recommendation approaches. [ABSTRACT FROM AUTHOR]

The folded paper-size illusion is as easy to demonstrate as it is powerful in generating insights into perceptual processing: First take two A4 sheets of paper, one original sized, another halved by folding, then compare them in terms of area size by centering the halved sheet on the center of the original one! We perceive the larger sheet as far less than double (i.e., 100%) the size of the small one, typically only being about two thirds larger--this illusion is preserved by rotating the inner sheet and even by aligning it to one or two sides, but is dissolved by aligning both sheets to three sides, here documented by 88 participants' data. A potential explanation might be the general incapability of accurately comparing more than one geometrical dimension at once--in everyday life, we solve this perceptual-cognitive bottleneck by reducing the complexity of such a task via aligning parts with same lengths. [ABSTRACT FROM AUTHOR]

The paper [[10]] considers an assignment problem and some modifications which can be converted to routing, distribution, or scheduling problems. This special issue of I Algorithms i is dedicated to recent developments of scheduling algorithms and new applications. References 1 Werner F., Burtseva L., Sotskov Y. Special Issue on Algorithms for Scheduling Problems. For this problem, a hybrid metaheuristic algorithm is presented which combines a genetic algorithm with a so-called spotted hyena optimization algorithm. [Extracted from the article]

In this paper, we present a new algorithm which can eliminate abnormal detection data of our OLED panels caused by damaged detection TFTs. During the manufacture of oversize OLED TVs, particles bring many serious problems especially when they make detection TFTs be damaged and these TFTs will cause one or even several columns of detection data to be abnormal. The new "abnormal detection data forbidden algorithm" will replace the adjacent normal column detection data for the column with obvious abnormal detection data and the new "mosaic algorithm" will scatter the detection data of these columns that the detection data is not obviously abnormal but they are thin lines visible to the human eyes when the panel is working. To sum up, the new integration algorithm is very important for improving the image quality and stable operation of our products. [ABSTRACT FROM AUTHOR]

Cross-language communication puts forward higher requirements for information mining in English translation course. Aiming at the problem that the frequent patterns in the current digital mining algorithms produce a large number of patterns and rules, with a long execution time, this paper proposes a digital mining algorithm for English translation course information based on digital twin technology. According to the results of word segmentation and tagging, the feature words of English translation text are extracted, and the cross-language mapping of text is established by using digital twin technology. The estimated probability of text translation is maximized by corresponding relationship. The text information is transformed into text vector, the semantic similarity of text is calculated, and the degree of translation matching is judged. Based on this data dimension, the frequent sequence is constructed by transforming suffix sequence into prefix sequence, and the digital mining algorithm is designed. The results of example analysis show that the execution time of digital mining algorithm based on digital twin technology is significantly shorter than that based on Apriori and Map Reduce, and the mining accuracy rate reached more than 80%, which has good performance in processing massive data. [ABSTRACT FROM AUTHOR]

The 5G technology will become a truly integrated technology. It's becoming the most famous technology because of its optimal system computing complex and transforming a group of individual network components. Adequate resources must be provided for the various devices that are typically on the same network. The various functions in the data system also require resource allocation to suit its needs. This will ensure that the various devices on that network perform different types of work effectively. It also represents the various device functionalites to ensure the estimated resources onetime manner. Only then will it be convenient to carry out a variety of jobs depending on their speed and selection. And its various data requirements vary according to the functionality of the various devices featured in this series segment dynamic configuration. In this paper a smart resource utilization scheme was proposed. Its main purpose is to better manage the off-the-shelf resources available here. And provide it where it is needed and streamline data delivery to users on the network. This ensures that all data goes to the users in the correct manner. The proposed method getting 49% energy consumption, 90% resource utilization, 92% resource reservation and 91% Quality of services. [ABSTRACT FROM AUTHOR]

Academic research is crucial to the development of science and technology and is an important factor that affects national strength. When writing an academic research paper, a rhetorical structure is typically used to present the paper's ideas, but this task is quite difficult for junior researchers. To solve this problem, some studies have adopted text mining to assist with the writing, but the existing methods still require human intervention to generate sentences. Recently, due to the increasing maturity of deep learning technology and the ability to address the problem of automatic text generation, progress has been made in this area. The highly complex deep learning operations can correctly generate sequences and find correlations between sequences. When a user provides a few keywords and key sentences, the proposed algorithm can generate an introduction section for the user. The results show that the generated introduction is more coherent, clearer, and more fluent than existing summarization methods. In addition, the method proposed in this study improves the accuracy compared with traditional text extraction methods. The manuscript produced by this study has been evaluated to show that the study can produce a comprehensive introduction compared with previous studies. • The proposed framework can generate a comprehensive introduction based on users' brief inputs. • This paper demonstrates a three-testing-threshold approach to check the content quality. • The introduction generated through this method has less than 3% similarity to the original text by comparison. [ABSTRACT FROM AUTHOR]

Complex systems in the real world often can be modeled as network structures, and community discovery algorithms for complex networks enable researchers to understand the internal structure and implicit information of networks. Existing community discovery algorithms are usually designed for single-layer networks or single-interaction relationships and do not consider the attribute information of nodes. However, many real-world networks consist of multiple types of nodes and edges, and there may be rich semantic information on nodes and edges. The methods for single-layer networks cannot effectively tackle multi-layer information, multi-relationship information, and attribute information. This paper proposes a community discovery algorithm based on multi-relationship embedding. The proposed algorithm first models the nodes in the network to obtain the embedding matrix for each node relationship type and generates the node embedding matrix for each specific relationship type in the network by node encoder. The node embedding matrix is provided as input for aggregating the node embedding matrix of each specific relationship type using a Graph Convolutional Network (GCN) to obtain the final node embedding matrix. This strategy allows capturing of rich structural and attributes information in multi-relational networks. Experiments were conducted on different datasets with baselines, and the results show that the proposed algorithm obtains significant performance improvement in community discovery, node clustering, and similarity search tasks, and compared to the baseline with the best performance, the proposed algorithm achieves an average improvement of 3.1% on Macro-F1 and 4.7% on Micro-F1, which proves the effectiveness of the proposed algorithm. [ABSTRACT FROM AUTHOR]

Because of the unique imaging mechanism of infrared (IR) sensors, IR images commonly suffer from blurred edge details, low contrast, and poor signal-to-noise ratio. A new method is proposed in this paper to enhance IR image details so that the enhanced images can effectively inhibit image noise and improve image contrast while enhancing image details. First, for the traditional guided image filter (GIF) applied to IR image enhancement is prone to halo artifacts, this paper proposes a detail enhancement guided filter (DGIF). It mainly adds the constructed edge perception and detail regulation factors to the cost function of the GIF. Then, according to the visual characteristics of human eyes, this paper applies the detail regulation factor to the detail layer enhancement, which solves the problem of amplifying image noise using fixed gain coefficient enhancement. Finally, the enhanced detail layer is directly fused with the base layer so that the enhanced image has rich detail information. We first compare the DGIF with four guided image filters and then compare the algorithm of this paper with three traditional IR image enhancement algorithms and two IR image enhancement algorithms based on the GIF on 20 IR images. The experimental results show that the DGIF has better edge-preserving and smoothing characteristics than the four guided image filters. The mean values of quantitative evaluation of information entropy, average gradient, edge intensity, figure definition, and root-mean-square contrast of the enhanced images, respectively, achieved about 0.23%, 3.4%, 4.3%, 2.1%, and 0.17% improvement over the optimal parameter. It shows that the algorithm in this paper can effectively suppress the image noise in the detail layer while enhancing the detail information, improving the image contrast, and having a better visual effect. [ABSTRACT FROM AUTHOR]

In order to improve the teaching effect of sports dance, this paper analyzes the traditional dance teaching motion capture, uses sensor motion perception algorithms to capture sports dance motion perception, and designs an intelligent sensor system that can be used for sports dance motion capture. Moreover, this paper combines the digital filter algorithm to design the hardware system structure of the sports dance motion capture system and builds a motion capture system for sports dance teaching based on the digital filter algorithm according to actual needs. In addition, this paper combines the simulation test to evaluate the performance of the system designed in this paper. The research results show that the motion capture system for sports dance teaching based on the digital filtering algorithm proposed in this paper can play an important role in sports dance teaching and effectively improve the efficiency of sports dance teaching. [ABSTRACT FROM AUTHOR]

At present, the monitoring of concrete cracks is still mainly carried out by engineering personnel using simple mechanical monitoring instruments. The human inspection will undoubtedly be interfered by the individual's psychological, physical, and external conditions, and there may also be unobjective emotions, so it is impossible to ensure that the quality of the detection is up to standard and accurate. This paper combines digital image processing technology and multiscale feature analysis automatic detection algorithm to construct an intelligent building structure crack detection system. Moreover, this paper proposes an enrichment scheme for the unknown partially entangled states of building microparticles and utilizes the entanglement exchange process based on the Raman interaction of two building microparticles. The experimental results show that the automatic detection method of building cracks based on digital image processing technology and multiscale feature analysis has a good effect. [ABSTRACT FROM AUTHOR]

Federated learning (FL) is a scheme in which several consumers work collectively to unravel machine learning (ML) problems, with a dominant collector synchronizing the procedure. This decision correspondingly enables the training data to be distributed, guaranteeing that the individual device's data are secluded. The paper systematically reviewed the available literature using the Preferred Reporting Items for Systematic Review and Meta-analysis (PRISMA) guiding principle. The study presents a systematic review of appliable ML approaches for FL, reviews the categorization of FL, discusses the FL application areas, presents the relationship between FL and Blockchain Technology (BT), and discusses some existing literature that has used FL and ML approaches. The study also examined applicable machine learning models for federated learning. The inclusion measures were (i) published between 2017 and 2021, (ii) written in English, (iii) published in a peer-reviewed scientific journal, and (iv) Preprint published papers. Unpublished studies, thesis and dissertation studies, (ii) conference papers, (iii) not in English, and (iv) did not use artificial intelligence models and blockchain technology were all removed from the review. In total, 84 eligible papers were finally examined in this study. Finally, in recent years, the amount of research on ML using FL has increased. Accuracy equivalent to standard feature-based techniques has been attained, and ensembles of many algorithms may yield even better results. We discovered that the best results were obtained from the hybrid design of an ML ensemble employing expert features. However, some additional difficulties and issues need to be overcome, such as efficiency, complexity, and smaller datasets. In addition, novel FL applications should be investigated from the standpoint of the datasets and methodologies. [ABSTRACT FROM AUTHOR]

As a classic project for the inheritance of Chinese folk culture, Wupaolong has the characteristics of unique material selection and complex production technology. However, as the finished products of folk handicrafts may not comply with production standards, a common problem in the production of handicrafts. Focusing on the problems of poor visual effects such as uneven surface and jagged edges in the craft paper binding model constructed by point cloud, and the need to enhance the sense of reality, this paper proposes an optimization method for 3D model and triangulation based on 3D line features. This method first preprocesses the feature points and performs sparse matching and dense matching on the processed feature points to generate a dense point cloud. The dense point cloud is then processed by an adaptive weighted median filtering method. This is followed by application of surface modeling method based on Delaunay algorithm to realize the reconstruction of object triangulation. Based on the triangular patch, the reference plane of the craft paper binding surface is fitted, and the model surface is corrected and optimized based on the reference plane. With the aid of three-dimensional line segments, the triangulation at the edge of the craft paper binding is corrected and optimized. Finally, an optimized three-dimensional model of craft paper binding is obtained. Experimental results show that the proposed algorithm can improve the unevenness of the 3D model plane and edges, and maintain the characteristics of the 3D model plane and edges. Compared with the existing surface reconstruction algorithms based on point cloud features, the optimized triangulation and model have higher accuracy and quality, which can greatly improve the visual effect of the model and improve the accuracy of the three-dimensional model. The research results of this paper can realize 3D modeling development for the production process of Wupaolong, effectively improve the elevation accuracy of the model, realize the production standard of digital Wupaolong model, and provide reference for folk production process. [ABSTRACT FROM AUTHOR]

In order to improve the effect of 3D virtual product network display, this paper combines digital drive technology to analyze the virtual simulation algorithm and proposes a digital drive-based Hough transform clustering virtual image processing algorithm. Through the knowledge of clustering and generalized Hough transform, generalized Hough transform is applied to clustering. Moreover, this paper uses cluster analysis to determine the image characteristics of three-dimensional virtual products. In addition, this article combines the methods proposed in this article to construct a three-dimensional virtual product network display system. The research shows that the digital-driven 3D virtual product network display algorithm model proposed in this paper has a good 3D virtual display effect. [ABSTRACT FROM AUTHOR]

On the network service platform for vocational education, there are currently over 10,000 online courses. Learners face a challenge in selecting interesting courses from the vast resources available. Learners' urgent need for personalized learning is becoming more apparent as educational informatization progresses. Personalized recommendation (PR) technology can aid personalized learning and increase learners' learning efficiency significantly. This paper constructs a smart classroom model based on AI (artificial intelligence) by studying the connotation and characteristics of smart classroom in light of the current research status and trend of smart classroom at home and abroad. The merits of the recommendation system are determined by the recommendation algorithm used by PR system. This paper primarily focuses on developing a personalized learning platform based on the CF (collaborative filtering) algorithm, as well as conducting system requirements analysis, database design, functional module design, implementation, and testing on this foundation. Experiments are carried out to see if the optimized PR algorithm in the network learning platform is effective. [ABSTRACT FROM AUTHOR]

An early detection tool for latent COVID-19 infections in oncology staff and patients is essential to prevent outbreaks in a cancer center. (1) Background: In this study, we developed and implemented two early detection tools for the radiotherapy area to identify COVID-19 cases opportunely. (2) Methods: Staff and patients answered a questionnaire (electronic and paper surveys, respectively) with clinical and epidemiological information. The data were collected through two online survey tools: Real-Time Tracking (R-Track) and Summary of Factors (S-Facts). Cut-off values were established according to the algorithm models. SARS-CoV-2 qRT-PCR tests confirmed the positive algorithms individuals. (3) Results: Oncology staff members (n = 142) were tested, and 14% (n = 20) were positives for the R-Track algorithm; 75% (n = 15) were qRT-PCR positive. The S-Facts Algorithm identified 7.75% (n = 11) positive oncology staff members, and 81.82% (n = 9) were qRT-PCR positive. Oncology patients (n = 369) were evaluated, and 1.36% (n = 5) were positive for the Algorithm used. The five patients (100%) were confirmed by qRT-PCR. (4) Conclusions: The proposed early detection tools have proved to be a low-cost and efficient tool in a country where qRT-PCR tests and vaccines are insufficient for the population. [ABSTRACT FROM AUTHOR]

The Parker-Oldenburg method, as a classical frequency-domain algorithm, has been widely used in Moho topographic inversion. The method has two indispensable hyperparameters, which are the Moho density contrast and the average Moho depth. Accurate hyperparameters are important prerequisites for inversion of fine Moho topography. However, limited by the nonlinear terms, the hyperparameters estimated by previous methods have obvious deviations. For this reason, this paper proposes a new method to improve the existing ParkerOldenburg method by taking advantage of the invasive weed optimization algorithm in estimating hyperparameters. The synthetic test results of the new method show that, compared with the trial and error method and the linear regression method, the new method estimates the hyperparameters more accurately, and the computational efficiency performs excellently, which lays the foundation for the inversion of more accurate Moho topography. In practice, the method is applied to the Moho topographic inversion in the South China Sea. With the constraints of available seismic data, the crust-mantle density contrast and the average Moho depth in the South China Sea are determined to be 0.535 g/cm3 and 21.63 km, respectively, and the Moho topography of the South China Sea is inverted based on this. The results of the Moho topography show that the Moho depth in the study area ranges from 5.7 km to 32.3 km, with more obvious undulations. Among them, the shallowest part of the Moho topography is mainly located in the southern part of the Southwestern sub-basin and the southern part of the Manila Trench, with a depth of about 6 km. Compared with the CRUST 1.0 model and the model calculated by the improved Bott's method, the RMS between the Moho model and the seismic point difference in this paper is smaller, which proves that the method in this paper has some advantages in Moho topographic inversion. [ABSTRACT FROM AUTHOR]

Copyright of INMATEH - Agricultural Engineering is the property of INMATEH - Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

With the development of the times, figurative expressions no longer meet the creative needs of artists and the aesthetic demands of the people. In order to express art in a more profound way, the perfect use of abstract graphics plays a crucial role in the success of the work. In recent years, there has been a surge in the creation of digital art, but there is relatively little theoretical literature on the combination of abstract graphics as a visual language and digital art. In addition, research on the theoretical aspects of digital art design is also relatively weak, so it is essential to analyse the formal aesthetics and innovative applications. In fact, digital art design has a very important role to play in promoting the development of creative cultural industries. In other words, the healthy development of digital art design can influence the future prospects of a country's creative and cultural industries. Digital art design is an integrated and complex production process and labour outcome. In addition to its human, aesthetic, and social value, digital art also has an economic value. Digital art is a new art form that combines digital technology and artistic aesthetics. As such, digital art is characterised by high technology, diverse forms, popularised art, and the advantages of high communication, interactivity, and influence, which can provide more assistance for the innovation and application of abstract graphics. Digital art is multifaceted and has an artistic expression that cannot be matched by other forms of technology. Abstract graphics, driven by digital art, are full of novelty and interest and can greatly enrich people's emotions and senses. Abstract graphics bring the experience of digital art to its fullest potential. The combination of digital art and abstract graphics offers more innovation and possibilities for the development of art and will bring great prosperity to art communication. With the widespread use of computer and network technology, the Internet has developed rapidly. In this context, digital art, as art created in a digital way and concept, has gained widespread attention. As a result, how to integrate existing computer resources in the new environment to build a model of digital art design effectiveness will cause a direct influence on the quality of digital art design with digital content innovation as the core. At the same time, as digital art becomes more and more popular, the demand for digital talents becomes very urgent. As a result, the cultivation of high-quality digital talents has become a major concern for society. Therefore, in order to explore the success of digital art design and the cultivation of digital art talents, and to better serve the innovation of digital art, this paper proposes a digital art effectiveness model based on the K-medoids algorithm. This model can provide a deeper and more comprehensive understanding of digital art and abstract graphics and provide theoretical support for professional design creation. [ABSTRACT FROM AUTHOR]

Context: Software product lines (SPLs) have reached a considerable level of adoption in the software industry. The most commonly used models for managing the variability of SPLs are feature models (FMs). The analysis of FMs is an error-prone, tedious task, and it is not feasible to accomplish this task manually with large-scale FMs. In recent years, much effort has been devoted to developing reasoning algorithms for FMs. Aim: To synthesize the evidence on the use of reasoning algorithms for feature modeling. Method: We conducted a systematic mapping study, including six research questions. This study included 66 papers published from 2010 to 2020. Results: We found that most algorithms were used in the domain stage (70%). The most commonly used technologies were transformations (18%). As for the origins of the proposals, they were mainly rooted in academia (76%). The FODA model continued to be the most frequently used representation for feature modeling (70%). A large majority of the papers presented some empirical validation process (90%). Conclusion: We were able to respond to the RQs. The FODA model is consolidated as a reference within SPLs to manage variability. Responses to RQ2 and RQ6 require further review. [ABSTRACT FROM AUTHOR]

In this paper two procedures are developed for the identification of the parameters contained in an orthotropic elastic-plastic-hardening model for free standing foils, particularly of paper and paperboard. The experimental data considered are provided by cruciform tests and digital image correlation. A simplified version of the constitutive model proposed by Xia et al. (Int J Solids Struct 39:4053-4071, ) is adopted. The inverse analysis is comparatively performed by the following alternative computational methodologies: (a) mathematical programming by a trust-region algorithm; (b) proper orthogonal decomposition and artificial neural network. The second procedure rests on preparatory once-for-all computations and turns out to be applicable economically and routinely in industrial environments. [ABSTRACT FROM AUTHOR]

The significant proliferation of research papers in both conferences and journals has made it difficult for researchers to easily access relevant scholarly papers for academic learning. This has been a substantial problem for many researchers. Conferences, in comparison with journals, have an aspect of social learning and networking, which leads to personal familiarisation through various interactions among researchers. In this paper, we improve the social awareness of conference participants by proposing a novel folksonomy-based paper recommendation algorithm, called socially aware recommendation of scholarly papers (SARSP). SARSP recommends papers issued by active participants (APs), to other Group Profile Participants at the same conference based on preference similarity of their research interests. In addition, SARSP computes the social ties between an AP and other conference participants to effectively generate social recommendations of scholarly papers. We evaluate our proposed algorithm using a real-world data-set. Our experimental results confirm that SARSP has significant improvement over other existing methods. [ABSTRACT FROM AUTHOR]

The paper presents a technique for determining the time index of growth of the slope of reverse voltage for double insulated cables, based on the body of the theory of series. It is proved that in the vicinity of the extremum point (maximum) the function of the reverse voltage is approximated by polynomials of the nth power. It is proposed to use second-degree polynomials for practical calculations. The method for calculating relevant indicators is illustrated using real data. Analysis of deviations made it possible to conclude that the calculation method proposed in the paper is far more accurate. In the final part of the study, it was concluded that there is a promising outlook for further development of methodological guidelines for determining complex indices of the remaining life of the cable, including but not limited to the use of various mathematical methods. [ABSTRACT FROM AUTHOR]

Achieving community immunity against the coronavirus disease 2019 (COVID-19) depends on vaccinating the largest number of people within a specific period while taking all precautionary measures. To address this problem, this paper presents a smart parking system that will help the health crisis management committee to vaccinate the largest number of people with the minimum period of time while ensuring that all precautionary measures are followed, through a set of algorithms. These algorithms seek to ensure a uniform distribution of persons in parking. This paper proposes a novel complex system for smart parking and nine algorithms to address the NP-hard problem. The experimental results demonstrate the performance of the proposed algorithms in terms of gap and time. Applying these algorithms to smart cities to ensure precautionary measures against COVID-19 can help fight against this pandemic. [ABSTRACT FROM AUTHOR]

Shuffled frog-leaping algorithm (SFLA) is recently introduced memetic algorithm inspired by foraging behavior of frogs. SFLA partially follows particle swarm optimization in local search process and shuffled complex evolution algorithm in performing global search. The key concept about such algorithms is to gain an edge over traditional or deterministic mathematical techniques to achieve comparatively better solutions to the multimodal or multifaceted optimization problems. SFLA embeds the features of both particle swarm optimization (PSO) and shuffled complex evolution (SCE) algorithm. In this study SFLA named as O-SFLA is proposed. In general structure of SFLA, the frogs are divided into memeplexes based on their fitness values where they forage for food. In this study the opposition based learning concept is embedded into the memeplexes before the frog initiates foraging. The proposal is validated on performance optimization of the Paper Mill. [ABSTRACT FROM AUTHOR]

Local dimming LCDs with a matrix backlight unit (BLU) are favored by many car manufacturers for high quality and low power displays. Automotive application sets high requirement like safety standard, whereas the temperature range and lifespan are wide. The contents are mostly HMIs with high contrast and circular structures. Thus, the two key components, BLU and the local dimming algorithm need to be adopted to automotive needs/demands and shall be jointly optimized. In this paper, the BLU design aspects and specification are described. Specific features relevant for automotive, like black corners and containment against LED outage, are introduced. The tradeoff between performance and cost is lifted. With a BLU with 384 LEDs, the contrast ratio may be enhanced by a factor of 20, while an average power saving ratio of 50% can be achieved. [ABSTRACT FROM AUTHOR]

The present paper corrects an assertion of the author from [1]. The pivoting algorithms referred to, search for solving the linear programming problem. [ABSTRACT FROM AUTHOR]

In 2018, the position paper 'Imaging the adult with congenital heart disease: a multimodality imaging approach' was published. The paper highlights, in the first part, the different imaging modalities applied in adult congenital heart disease patients. In the second part, these modalities are discussed more detailed for moderate to complex anatomical defects. Because of the length of the paper, simple lesions were not touched on. However, imaging modalities to use for simple shunt lesions are still poorly known. One is looking for structured recommendations on which they can rely when dealing with an (undiscovered) shunt lesion. This information is lacking for the initial diagnostic process, during repair and at follow-up. Therefore, this paper will focus on atrial septal defect, ventricular septal defect, and persistent arterial duct. Pre-, intra-, and post-procedural imaging techniques will be systematically discussed. This position paper will offer algorithms that might help at a glance. The document is prepared for general cardiologists, trainees, medical students, imagers/technicians to select the most appropriate imaging modality and to detect the requested information for each specific lesion. It might serve as reference to which researchers could refer when setting up a (imaging) study. [ABSTRACT FROM AUTHOR]

Zemblys et al. (Behavior Research Methods, 51(2), 840–864, 2019) reported on a method for the classification of eye-movements ("gazeNet"). I have found three errors and two problems with that paper that are explained herein. Error 1: The gazeNet classification method was built assuming that a hand-scored dataset from Lund University was all collected at 500 Hz, but in fact, six of the 34 recording files were actually collected at 200 Hz. Of the six datasets that were used as the training set for the gazeNet algorithm, two were actually collected at 200 Hz. Problem 1 has to do with the fact that even among the 500 Hz data, the inter-timestamp intervals varied widely. Problem 2 is that there are many unusual discontinuities in the saccade trajectories from the Lund University dataset that make it a very poor choice for the construction of an automatic classification method. Error 2 The gazeNet algorithm was trained on the Lund dataset, and then compared to other methods, not trained on this dataset, in terms of performance on this dataset. This is an inherently unfair comparison, and yet nowhere in the gazeNet paper is this unfairness mentioned. Error 3 arises out of the novel event-related agreement analysis employed by the gazeNet authors. Although the authors intended to classify unmatched events as either false positives or false negatives, many are actually being classified as true negatives. True negatives are not errors, and any unmatched event misclassified as a true negative is actually driving kappa higher, whereas unmatched events should be driving kappa lower. [ABSTRACT FROM AUTHOR]

Copyright of China Pulp & Paper is the property of China Pulp & Paper Magazines Publisher and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Research paper recommenders emerged over the last decade to ease finding publications relating to researchers’ area of interest. The challenge was not just to provide researchers with very rich publications at any time, any place and in any form but to also offer the right publication to the right researcher in the right way. Several approaches exist in handling paper recommender systems. However, these approaches assumed the availability of the whole contents of the recommending papers to be freely accessible, which is not always true due to factors such as copyright restrictions. This paper presents a collaborative approach for research paper recommender system. By leveraging the advantages of collaborative filtering approach, we utilize the publicly available contextual metadata to infer the hidden associations that exist between research papers in order to personalize recommendations. The novelty of our proposed approach is that it provides personalized recommendations regardless of the research field and regardless of the user’s expertise. Using a publicly available dataset, our proposed approach has recorded a significant improvement over other baseline methods in measuring both the overall performance and the ability to return relevant and useful publications at the top of the recommendation list. [ABSTRACT FROM AUTHOR]