Search

Abstract: Considering the increasing role of microturbines in distributed generation of combined heat and power (CHP), the localization of microturbine design and manufacturing technology has received great importance in Iran. Providing a complete and comprehensive algorithm can be a major step in reaching the goal. In this paper, we present the cycle for the thermofluids design of a 100 KW microturbine which is carried out at the Niroo Research Institute of Iran to simultaneously generate both electricity and useful heat. The characteristics of this system are as follows: revolution speed of 47750rpm, single shaft, natural gas as fuel, single stage radial turbine/compressor and annular combustion chamber. Based on the thermodynamic characteristics of the cycle, the characteristics of different components of microturbine are determined throughout the study. According to the determined values, we expect the cycle to achieve an efficiency of approximately 13% without the recuperator and 25% with the recuperator. It must be noted that the designed microturbine is going through the final assembly stages at the time and the performance test has not been conducted yet. Therefore, the over-all characteristics curve of the system was not available at the time of preparing this article. [Copyright &y& Elsevier]

Abstract: In the absence of either satellite ephemeris information or camera model, rational functions are introduced by many investigators as mathematical model for image to ground coordinate system transformation. The dependency of this method on many ground control points (GCPs), numerical complexity, particularly terms selection, can be regarded as the most known disadvantages of rational functions. This paper presents a mathematical solution to overcome these problems. Genetic algorithms are used as an intelligent method for optimum rational function terms selection. The results from an experimental test carried out over a test field in Iran are presented as utilizing an IKONOS Geo image. Different numbers of GCPs are fed through a variety of genetic algorithms (GAs) with different control parameter settings. Some initial constraints are introduced to make the process stable and fast. The residual errors at independent check points proved that sub-pixel accuracies can be achieved even when only seven and five GCPs are used. GAs could select rational function terms in such a way that numerical problems are avoided without the need to normalize image and ground coordinates. [Copyright &y& Elsevier]

In this paper, optimal designing and energy management of hybrid photovoltaic/wind/fuel cell (PV/WT/FC) system is presented with cost of hybrid system life span (CHSLS) minimizing and considering loss of load interruption probability (LOLIP) for Recreational Center of Gonbad (RCOG), a remote area region in Iran country using actual irradiance and wind speed data of this region. A meta-heuristic improved sine–cosine algorithm (ISCA) is used based on nonlinearly decreasing inertia weight strategy (NDIWS) for improving global and local search of the conventional SCA to find the optimal combination of hybrid system. In designing problem the optimal size of hybrid system components is determined using ISCA considering CHLS and LOLIP to satisfy the RCOG load demand in most cost-effective way. The performance of the proposed ISCA is compared with conventional SCA and well-known PSO methods in different combinations and under LOLIP changing conditions. Simulation results showed that the ISCA finds easily the optimal combination as PV/WT/FC system with lower CHSLS and better LOLIP. Also WT/FC system is not economical due to high CHSLS for RCOG. The results demonstrated that the average cost of per kW RCOG load supply using the PV/WT/FC for maximum LOLIP of 1% is equal to 0.87$ and for maximum LOLIP of 5% is 0.76$. The results showed the contribution and management of PV, WT and fuel cell together as PV/WT/FC is made a reliable and cost-effective energy system to supply the remote area application like RCOG. Moreover superiority of the ISCA than the SCA and PSO is proved with better convergence speed and accuracy. Also, the effect of some effective factors on the system designing is evaluated. • Hybrid system designing for RCOG load supply using ISCA, case study for Iran. • Optimal sizing of PV/WT/FC with minimizing the CHSLS and respect to the LOLIP. • Determination of reliable and cost-effective system combination to supply RCOG load. • Superiority of the ISCA performance compared to SCA and well-known PSO method. • Investigating the effect of some economic and technical factors on system designing. [ABSTRACT FROM AUTHOR]