Search

Copyright of Transactions of the Chinese Society of Agricultural Engineering is the property of Chinese Society of Agricultural Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Regarding the suppression of radar mainlobe jamming, a blind extraction method for suppressing mainlobe jamming based on maximizing the signal to interference plus noise ratio (SINR) is proposed. Unlike blind separation, blind extraction can extract interested components from multiple mixed signals, making it more suitable for jamming suppression in complex electromagnetic environments with multiple sources and channels. This method establishes an optimization model for maximizing SINR in the distance domain. The target echo signal is solved and extracted using the particle swarm optimization (PSO) algorithm to achieve mainlobe jamming suppression. Simulation testing shows that the proposed method improves the jamming suppression effect compared to traditional blind separation jamming suppression methods. It does not require estimation of the number of sources and has lower requirements for the number of channels, making it applicable in underdetermined scenarios. Additionally, it reduces computational complexity, making it more suitable for complex electromagnetic environments. [ABSTRACT FROM AUTHOR]

To solve the problem on low classification accuracy caused by the difficulty of extracting features of micro-motion targets, such as pedestrians, vehicles, and drones in low-altitude radar monitoring scenarios, a multi-channel radar target micro-motion feature classification method based on EfficientNet is proposed. Firstly, a multi-energy singular value decomposition method is proposed to suppress clutter and noise, and enhance the micro-motion characteristics of the target based on the energy distribution differences between the clutter, target, and noise signals. Secondly, the multi-channel EfficientNet model is designed to combine time-frequency information features in radar sum and difference channels, and further fuse multi-channel micro-motion features to achieve accurate target classification. Finally, the effectiveness of the proposed method is visited through experiments using radar measured target data. The results show that compared with other methods, the proposed method significantly improves classification accuracy with low model complexly. [ABSTRACT FROM AUTHOR]

To address the technical problems of target detection and identification of missile-borne radar in the background of strong ground clutter, we propose to combine the high resolution range profile (HRRP) technology and Doppler beam sharpening (DBS) technology to carry out two-dimensional high-resolution imaging of the ground to improve the performance of radar target detection and identification in the presence of clutter. The method uses the linear frequency modulation stepped frequency (LFM-SF) signal as the basic waveform. Firstly, the Doppler effect caused by the platform speed is discussed in detail and corrected. Then, HRRP sequences corresponding to each frame are obtained through distance profile extraction, and aiimuth high resolution is achieved using fast Fourier transform (FFT). Finally, motion compensation is applied to the errors caused by the platform in actual light conditions, completing the two-dimensional resolution of the area within the beam. The processing of measured data has verified the effectiveness and practicality of the proposed algorithm. [ABSTRACT FROM AUTHOR]

The intermittent sampling repeater jamming (ISRJ) technology is a clever coherent multi-false target jamming technology. New research on ISRJ against different radar processing systems and different radar waveforms has become one of the hotspots in the current radar countermeasures field. In order to further clarify the characteristics of ISRJ and corresponding expanded application prospects, the background and basic principles of ISRJ has been reviewed firstly. Then, the detailed development history of ISRJ has also been outlined and the new ISRJ types were summarized and classified. At last, the expanded application of intermittent sampling in radar detection and other fields was introduced, aiming to provide some reference for experts and scholars. [ABSTRACT FROM AUTHOR]

Focusing on the issue of error detection in terminal guidance radar under sea clutter background, research on sea clutter suppression and discrimination is conducted. The target identification and classification algorithm based on Tri-feature training is adopted, and the target amplitude, peak duration range and fluctuation rate are used as feature quantities. The radial basis function (RBF) is selected as the kernel function, which has strong nonlinear mapping ability and can better represent the relationship between data in high-dimensional space. Then, the support vector machine ( SVM) target identification and classification classifier design and experimental data verification are carried out. Verified by publicly available measured data, the accuracy rate of the proposed algorithm has reached over 97%. Compared with the traditional template matching recognition method, the target identification and classification algorithm based on Tri-feature training has higher identification accuracy, which proves the effectiveness and progressiveness of the proposed method. [ABSTRACT FROM AUTHOR]

Copyright of Machine Tool & Hydraulics is the property of Guangzhou Mechanical Engineering Research Institute (GMERI) and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Electronic Science & Technology is the property of Electronic Science & Technology Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Systems Engineering & Electronics is the property of Journal of Systems Engineering & Electronics Editorial Department and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Systems Engineering & Electronics is the property of Journal of Systems Engineering & Electronics Editorial Department and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Systems Engineering & Electronics is the property of Journal of Systems Engineering & Electronics Editorial Department and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Systems Engineering & Electronics is the property of Journal of Systems Engineering & Electronics Editorial Department and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Systems Engineering & Electronics is the property of Journal of Systems Engineering & Electronics Editorial Department and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Systems Engineering & Electronics is the property of Journal of Systems Engineering & Electronics Editorial Department and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

An improved SAF-FCOS radar-vision fusion target detection network is proposed to address the difficulty in effectively utilizing radar point cloud information and image features, as well as the issue of false or missed detections in harsh weather environments. The backbone network structure of SAF-FCOS is improved, and multi-scale fusion of radar feature information is carried out at C3 and C4 feature layers, so that the network model can make full use of radar information. Using improved LNblock module--LNblcok_GAM before detection layers can extract image features at a lower computational cost while improving the detection performance of the network. In terms of regression loss, the improved CEIOU based on EIOU and GIOU is used to replace the GIOU in the original network, improving the detection accuracy of the network and enhancing the robustness of the model. On the NuScenes dataset, the improved network achieves 70.7% mAP0.5:0.95 and 90.5% AP50, respectively, which are 1.7 percentage points and 0.9 percentage points higher than the original network SAF-FCOS. The missed and false detections are effectively reduced, and the overall detection performance of the improved network is better than other classic visual target detection algorithms. [ABSTRACT FROM AUTHOR]

Ground penetrating radar (GPR) is a non-destructive exploration technology that utilizes high-frequency ultra-wideband signals to detect the distribution of subsurface objects and media. Benefiting from the advantages of non-destructiveness, high efficiency, and high resolution, GPR has been widely applied in underground defect detection task of urban roads. Illustrating the radar echo wave of subsurface structure, GPR B-scan images are a main means to detect underground disaster; however, compared to natural images, automatic interpretation of GPR B-scan ones is a more challenging task because of same objects with different spectra, different objects with same spectrum as well as heavy noise pollution. Aiming to improve the accuracy of subsurface disasters detection methods, a disasters classification network, i.e., MA-ResNeXt, based on ResNetXt50 is proposed by combining multi-dimensional attention mechanism, atrous space pyramid pool and multi-scale feature extraction structure. The proposed network is trained and tested on real GPR B-scan images of three common subsurface disasters, e.g., void, cavity underneath pavement (CUP) and loosely infilled void (LIV). The comparison results show that classification accuracy of the proposed network approaches 98.2%, and illustrate that the network can effectively realize accurate classification of underground disasters. [ABSTRACT FROM AUTHOR]

Copyright of Acta Scientiarum Naturalium Universitatis Sunyatseni / Zhongshan Daxue Xuebao is the property of Sun-Yat-Sen University and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Journal of Ordnance Equipment Engineering is the property of Chongqing University of Technology and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

In the time-frequency analysis of the echoes from targets with composite micro-motions, there is a problem that the energy of time-frequency strip is difficult to focus, which affects the extraction and analysis of the target's micro-Doppler feature. To solve this problem, this paper proposes the concept of time-frequency harmonic stripes and corresponding time-frequency transformation methods. Based on the assumption that the composite micro-motions include central motion components and high-frequency motion components, firstly, spline function is used to fit the frequency curve of the central motion component, and therefore construct the time-frequency transform kernel is constructed. Then, parameterized time-frequency transform is used to convert the composite micro-Doppler signal in the time domain to harmonic stripes on the time-frequency plane. Compared with traditional methods such as short-time Fourier transform and pseudo Wigner-Ville distribution, the proposed method can significantly improve the energy aggregation and spur suppression of time-frequency transform of radar echoes from composite micro-motion targets. Simulation results verify the effectiveness of the proposed method and its adaptability to low signal-to-noise ratio (SNR) conditions. [ABSTRACT FROM AUTHOR]

Aiming at the problem that the radar signal of ballistic target is easily affected by the environment and the target recognition accuracy is low, a radar cross section (RCS) recognition method of ballistic target based on dual-tree complex wavelet transform (DTCWT) and variational autoencoder (VAE) is proposed. Firstly, the dynamic datas of ballistic target RCS are preprocessed by DTCWT. Then, the hidden variable features of target are extracted by VAE. Finally, the support vector machine (SVM) classifier is used to identify the data. Experimental results show that compared with the existing methods, the proposed method has higher recognition probability and better robustness. [ABSTRACT FROM AUTHOR]

C-band high-power microwave devices have important application prospects in communication, radar and other fields, and the demand for compact and lightweight devices is becoming more and more urgent in the industrial sector. A C-band high-efficiency coaxial transit-time oscillator (CTTO) with three-cavity buncher and dual-cavity extractor is proposed and investigated in theory and 2.5-dimensional particle-in-cell simulations, which is good for high power microwave generation devices at low frequency towards miniaturization and compactness. In order to avoid the transverse electromagnetic mode (TEM) leaking to the diode region, the reflector is designed and adopted in front of the buncher, which also can pre-modulate the beams and lead to the higher conversion efficiency. In this simulation, the typical performance of the CTTO reveals that microwaves with a power of 1.83 GW are generated at a frequency of 6.37 GHz when the beam voltage and current are 458 kV and 9.6 kA respectively, under a guiding magnetic field of 1.05 T. The corresponding power conversion efficiency is as high as 41.6%. [ABSTRACT FROM AUTHOR]

For calibrating the measurement error of the speed sensor and estimating the speed accurately while system is nonlinear and noise is non-Gaussian, dual radar and wheel axle sensor are configured and federal particle filter is used to acquire fusion. The whole operation process of CRH3 train from start to stop between two stations is taken as an example, the speed measurement errors of different speed estimation methods under the conditions of train idling, slipping, vibration and the speed sensor with dynamic noise are analyzed and verified. The simulation results show that: The root-mean-square error can be reduced by 31.52% and 47.35% respectively in the idling and sliding stages after the calibration of dual-radar and wheel-axle combination compared with no calibration; Compared with the two types of dual-radar calibration methods, the maximum relative error of the dual-radar separation vibration speed calibration method can be 39.66% lower than that of the dual-radar angle deviation estimation calibration method when the train vibration speed ratio is 0 to 1 and the radar installation angle error is -1° to 1°. Compared with the filtering results of dual radar and axle sensors before fusion, the speed measurement results after using joint particle filtering fusion are 34.71% and 14.03% lower in MAE, and 26.51% and 10.98% lower in RMSE respectively. Compared with federated extended Kalman filter fusion, the root mean square error of velocity measurement using federated particle filter fusion is 26.97% lower and the maximum absolute error can be reduced by 16.10%. [ABSTRACT FROM AUTHOR]

Copyright of Geomatics & Information Science of Wuhan University is the property of Geomatics & Information Science of Wuhan University and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Command Control & Simulation / Zhihui Kongzhi yu Fangzhen is the property of Command Control & Simulation Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Ordnance Industry Automation is the property of Editorial Board for Ordnance Industry Automation and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Telecommunication Engineering is the property of Telecommunication Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Science Technology & Engineering is the property of Chinese Society of Technology Economics and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Aero Weaponry is the property of Aero Weaponry Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Journal of Ordnance Equipment Engineering is the property of Chongqing University of Technology and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Telecommunication Engineering is the property of Telecommunication Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Telecommunication Engineering is the property of Telecommunication Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Systems Engineering & Electronics is the property of Journal of Systems Engineering & Electronics Editorial Department and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Systems Engineering & Electronics is the property of Journal of Systems Engineering & Electronics Editorial Department and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Systems Engineering & Electronics is the property of Journal of Systems Engineering & Electronics Editorial Department and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Systems Engineering & Electronics is the property of Journal of Systems Engineering & Electronics Editorial Department and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Telecommunication Engineering is the property of Telecommunication Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Journal of Chongqing University of Technology (Natural Science) is the property of Chongqing University of Technology and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Geomatics & Information Science of Wuhan University is the property of Geomatics & Information Science of Wuhan University and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Systems Engineering & Electronics is the property of Journal of Systems Engineering & Electronics Editorial Department and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Systems Engineering & Electronics is the property of Journal of Systems Engineering & Electronics Editorial Department and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Systems Engineering & Electronics is the property of Journal of Systems Engineering & Electronics Editorial Department and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Systems Engineering & Electronics is the property of Journal of Systems Engineering & Electronics Editorial Department and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Systems Engineering & Electronics is the property of Journal of Systems Engineering & Electronics Editorial Department and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Systems Engineering & Electronics is the property of Journal of Systems Engineering & Electronics Editorial Department and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Systems Engineering & Electronics is the property of Journal of Systems Engineering & Electronics Editorial Department and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Telecommunication Engineering is the property of Telecommunication Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Forest Engineering is the property of Forest Engineering Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Systems Engineering & Electronics is the property of Journal of Systems Engineering & Electronics Editorial Department and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Systems Engineering & Electronics is the property of Journal of Systems Engineering & Electronics Editorial Department and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Application Research of Computers / Jisuanji Yingyong Yanjiu is the property of Application Research of Computers Edition and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)