Search

A γ-spectroscopy campaign named "ν-Ball" was perfomed at the ALTO facility. A large fraction of the beam time was dedicated to the fast neutron induced fission of two fissioning systems: 232Th and 238U. During the data analysis, it was noticed that the high activity of the natTh was heavily contaminating any coincidence matrices (or cubes) built. This caused the identification of weakly produced fission fragments identification to be almost impossible. It was decided to explore the opportunity opened by new analysis methods based on neural networks algorithms. In this paper, the methods to build an adequate neural network and the results obtained for fission event reconstruction are presented. [ABSTRACT FROM AUTHOR]

Aircraft wake is a pair of strong counter-rotating vortices generated behind an aircraft, which might be very hazardous to a flowing aircraft and the detection of which has attracted much attention in aviation safety field. This conference paper introduces two parameter-retrieval algorithms, i.e., Optimization method and Max-min method. They have been integrated into a toolbox and can retrieve the parameters of wake vortex efficiently and robustly. [ABSTRACT FROM AUTHOR]

Analysis of production systems (PS) of discrete multi-nomenclature machine-building enterprises is a complex task, its solution is necessary to support decision-making during technical re-equipment, modernization or technological preparation of production. The paper shows a concept of joint use of operational scheduling systems and simulation modeling systems to improve the efficiency and adequacy of PS analysis. The problem of determining the deviation of the planned state of the PS from the simulated state and evaluating the level of stability and stability of the PS behaviour on its basis is considered. It is revealed that the proposed approach allows us to more adequately determine the timing of the production program, assess the stability of the PS behaviour when using various planning logics and algorithms, and choose the best one for subsequent use in a real PS. [ABSTRACT FROM AUTHOR]

The paper considers the development of algorithms for an adequate description of processes of different scales in porous media. The choice of a computational technique is determined by the reference size of the problem being solved. Models of porous medium flow under Darcy's law, neglecting the medium microstructure, are used for the simulation at macro-scale. While at micro-scale, a direct description of fluid flow in porous channels with complex geometry by means of gas dynamic equations is used. In the first case the proposed model of non-isothermal multiphase multicomponent flow in a porous medium includes the mass balance and total energy conservation equations modified by analogy to the known quasi-gas dynamic equations. The model features are the introduction of minimal reference scales in space and in time and the change of the system type from parabolic to hyperbolic to increase the stability of explicit difference schemes applied for approximation. In the second case the dimensionless form of the quasi-gas dynamic system with pressure decomposition, developed by the authors earlier, is adapted to the simulation of flows in the pore space. The fictitious domain method is proposed to reproduce the core microstructure. The developed approaches have been verified by test predictions. [ABSTRACT FROM AUTHOR]

The research conducted in this paper is in the field of machine learning. The main object of the research is the learning process of an artificial neural network in order to increase its efficiency. The algorithm based on the analysis of retrospective learning data. The dynamics of changes in the values of the weights of an artificial neural network during training is an important indicator of training efficiency. The algorithm proposed in this work is based on changing the weight gradients values. Changing of the gradients weights makes it possible to understand how actively the network weights change during training. This knowledge helps to diagnose the training process and makes an adjusting the training parameters. The results of the algorithm can be used to train an artificial neural network. The network will help to determine the set of measures (actions) needed to optimize the learning process by the algorithm results. [ABSTRACT FROM AUTHOR]

An Internet of Things (IoT) device is usually powered by a small battery, which does not last long. As a result, saving energy in IoT devices has become an important issue when it comes to this subject. Since power consumption is the primary cause of radio communication, some researchers have proposed several compression algorithms with the purpose of overcoming this particular problem. Several data compression algorithms from previous reference papers are discussed in this paper. The description of the compression algorithm in the reference papers was collected and summarized in a table form. From the analysis, MAS compression algorithm was selected as a project prototype due to its high potential for meeting the project requirements. Besides that, it also produced better performance regarding energy saving, better memory usage, and data transmission efficiency. This method is also suitable to be implemented in WSN. MAS compression algorithm will be prototyped and applied in portable electronic devices for Internet of Things applications. [ABSTRACT FROM AUTHOR]

The ATLAS experiment at the LHC relies on a complex and distributed Trigger and Data Acquisition (TDAQ) system to gather and select particle collision data. The Event Filter (EF) component of the TDAQ system is responsible for executing advanced selection algorithms, reducing the data rate to a level suitable for recording to permanent storage. The EF functionality is provided by a computing farm made up of thousands of commodity servers, each executing one or more processes. Moving the EF farm management towards a solution based on software containers is one of the main themes of the ATLAS TDAQ Phase-II upgrades in the area of the online software; it would make it possible to open new possibilities for fault tolerance, reliability and scalability. This paper presents the results of an evaluation of Kubernetes as a possible orchestrator of the ATLAS TDAQ EF computing farm. Kubernetes is a system for advanced management of containerized applications in large clusters. This paper will first highlight some of the technical solutions adopted to run the offline version of today's EF software in a Docker container. Then it will focus on some scaling performance measurements executed with a cluster of 1000 CPU cores. In particular, this paper will report about the way Kubernetes scales in deploying containers as a function of the cluster size and show how a proper tuning of the Query per Second (QPS) Kubernetes parameter set can improve the scaling of applications in terms of running replicas. Finally, an assessment will be given about the possibility to use Kubernetes as an orchestrator of the EF computing farm in LHC's Run 4. [ABSTRACT FROM AUTHOR]

ATLID ("ATmospheric LIDar") is the lidar to be flown on the multi-instrument Earth Clouds and Radiation Explorer (EarthCARE or ECARE) joint ESA/JAXA mission now scheduled for launch in 2022. ATID is a 3 channel linearly polarized High-Spectral Resolution (HSRL) system operating at 355nm. Cloud and aerosol optical properties are key ECARE products. This paper will provide an overview of the ATLID L2a (i.e. single instrument) retrieval algorithms being developed and implemented in order to derive cloud and aerosol optical properties. [ABSTRACT FROM AUTHOR]

With the rapid growth of data volume and the development of artificial intelligence technology, deep-learning methods are a new way to model land subsidence. We utilized a long short-term memory (LSTM) model, a deep-learning-based time-series processing method to model the land subsidence under multiple influencing factors. Land subsidence has non-linear and time dependency characteristics, which the LSTM model takes into account. This paper modelled the time variation in land subsidence for 38 months from 2011 to 2015. The input variables included the change in land subsidence detected by InSAR technology, the change in confined groundwater level, the thickness of the compressible layer and the permeability coefficient. The results show that the LSTM model performed well in areas where the subsidence is slight but poorly in places with severe subsidence. [ABSTRACT FROM AUTHOR]

The interference fringes produced by the target movement contain information such as the motion parameters of the moving target and the waveguide invariant of the sound field. However, most of the time required by the estimation algorithm of target motion parameters and waveguide invariant using interference fringes must include the nearest passing point. In order to solve this shortcoming, this paper proposes a new fitting method. The main process is to extract the interference fringes of the target motion from the time-frequency diagram, and use the difference of the interference fringes at different frequencies to predict and fit the interference fringes of the entire motion process of the target, so as to satisfy most of the target motion parameters using interference fringes. And the interference fringe information required by the estimation algorithm of waveguide invariant. The simulation results show that when the interference fringe has no nearest passing point information, the method proposed in this paper can fit the entire interference fringe more accurately, and can obtain the target motion parameters and waveguide invariant. [ABSTRACT FROM AUTHOR]

The emotional state of an employee of any enterprise influences both the efficiency of work performance and the quality and stability of the final result. Management of production processes, taking into account the monitoring of the emotional state of the employee, is a rather urgent task that allows minimizing the risks of deviations from the specified level of product quality and production safety. However, the quality of the assessment of this influence is currently subjective and is based both on the personal opinion and competences of the expert conducting the monitoring, and on the tools used by him for assessing the emotional state. At the same time, the use of modern intelligent automated methods and tracking systems will reduce the distortion of expert judgment. Creation of an expert system for analyzing the emotional state of employees of an enterprise will make it possible to recognize the emotions of a particular employee with a fairly high degree of accuracy, accumulate a system of knowledge and generate analytical conclusions and predictions of behavior based on it, compile an emotional portfolio of each employee and draw conclusions about the ability to perform a certain type of work and current states. This paper presents the concept of an algorithm of an expert system (hereinafter referred to as ES), which is able, on the basis of the data obtained on the individual methods of non-verbal expression of an employee's emotions, to assess the influence of his emotions on the quality of his work. The article reflects the results obtained in the framework of the implementation of the Agreement on research No. 05.601.21.0019 dated November 29, 2019. [ABSTRACT FROM AUTHOR]

In this paper, we investigate the possibility of applying various approaches to solving the problem of medium-term forecasting of daily passenger traffic volumes in the Moscow metro (MM): 1) on the basis of artificial neural networks (ANN); 2) using the singular-spectral analysis implemented in the package “Caterpillar”-SSA; 3) sharing the ANN and the “Caterpillar”-SSA approach. We demonstrate that the developed methods and algorithms allow us to conduct medium-term forecasting of passenger traffic in the MM with reasonable accuracy. [ABSTRACT FROM AUTHOR]

In this paper we present an enhancement of the regression-based variance reduction approaches recently proposed in Belomestny et al. [1] and [4]. This enhancement is based on a truncation of the control variate and allows for a significant reduction of the computing time, while the complexity stays of the same order. The performances of the proposed truncated algorithms are illustrated by a numerical example. [ABSTRACT FROM AUTHOR]

Subsidence can now be routinely mapped on a national scale thanks to ESA's Sentinel-1 sensors and advanced scalable SqueeSAR® processing. In order to be integrated into existing monitoring programmes, the SqueeSAR® datasets can be calibrated with GNSS measurements. The dense spatial coverage of SqueeSAR® deformation maps captures local deformation phenomena, and with appropriate calibration, can advance the understanding of regional deformation trends. The regular and reliable SAR image acquisitions by Sentinel-1, as well as significant improvements in the scalability of SqueeSAR® processing allow regular updates of deformation maps on a national scale. Filtering the large amount of data for relevant information is achieved by using an algorithm to detect changes in displacement trends. [ABSTRACT FROM AUTHOR]

The aim of an autoencoder neural network is to transform the input data into a lower-dimensional code and then to reconstruct the output from this representation. Applications of autoencoders to classifying sound events in the road traffic have not been found in the literature. The presented research aims to determine whether such an unsupervised learning method may be used for deploying classification algorithms applied to the automatic annotation of road traffic-related events based on noise analysis. Two-dimensional representation of traffic sounds based on 1D convolution was fed the core of autoencoder neural network, and after that classified with seven feed-forward classification subnetworks. Obtained results show that sound recordings can help determine the number of vehicles passing on the road. However, instead of being treated as independent, this method output should be combined with another source of data, e.g., video processing results or microwave radar data readings. Results of vehicle types classification and occupied lane obtained with the use of autoencoder are shown in the paper. [ABSTRACT FROM AUTHOR]

The paper presents a method developed for detecting rough errors in the measurements related to batteries in the part of electric power system that is characterised by low data redundancy. Since batteries either produce or consume power, not all methods of bad data detection can be used to detect erroneous measurements of the active power of the battery in the case of low measurement redundancy. Because of different values of the active power that a battery may produce or consume at several snapshots in row, dynamic algorithms cannot be used. In this study, a new method of bad data detection is developed. The method is based on the battery control strategy analysis. [ABSTRACT FROM AUTHOR]

Precise information about the spatial distribution of sound speed in tissue has diagnostic value in itself, and also enables effective aberration correction in standard ultrasonic imaging. An algorithm called Computed Ultrasound Tomography in Echo mode (CUTE) makes it possible to reconstruct quantitative sound speed images. However, the computational cost is high, which is an obstacle to CUTE implementation in real-time imaging systems. This paper presents an improved version of the CUTE algorithm called Quick-CUTE (QCUTE). The CUTE algorithm uses the inverse transformation matrix to reconstruct the sound speed spatial distribution. The Q-CUTE algorithm is based on simplified model with unified integration paths which enables solving the inverse problem without use of a large transformation matrix. The Q-CUTE algorithm was verified through numerical simulations. The obtained results differ from those of the CUTE algorithm but maintain the quantitative character of sound speed imaging. The computational complexity of the QCUTE algorithm is proportional to N while in case of the CUTE it is proportional to N squared (where N is a number of pixels in the sound speed image). This means that the Q-CUTE algorithm allows the quantitative sound speed imaging to operate in real time. [ABSTRACT FROM AUTHOR]

The computation of involutive bases and Gröbner bases for linear systems of difference equations is solved and its importance for physical and mathematical problems is discussed. The algorithm and issues concerning its implementation in C are presented and calculation times are compared with the competing programs. The paper ends with consideration on the parallel version of this implementation and its scalability. [ABSTRACT FROM AUTHOR]

The paper presents an efficient Cellular Automaton based algorithm for trajectory reconstruction in the Transition Radiation Detector of the CBM experiment. The comparison of the different electron identification methods is also given. [ABSTRACT FROM AUTHOR]

SymPy computer algebra library is used for automatic generation of ordinary and stochastic systems of differential equations from the schemes of kinetic interaction. Schemes of this type are used not only in chemical kinetics but also in biological, ecological and technical models. This paper describes the automatic generation algorithm with an emphasis on application details. [ABSTRACT FROM AUTHOR]

This paper develops a general central limit theorem (CLT) for post-stratified Monte Carlo estimators with an associated infinite number of strata. In addition, consistency of the corresponding variance estimator is established in the same setting. With these results in hand, one can then construct asymptotically valid confidence interval procedures for such infinitely stratified estimators. We then illustrate our general theory, by applying it to the specific case of debiased multi-level Monte Carlo (MLMC) algorithms. This leads to the first asymptotically valid confidence interval procedure for such stratified debiased MLMC procedures. [ABSTRACT FROM AUTHOR]

This paper presents a validation test comparing angular distributions from an electron multiple-scattering experiment with those generated using the MCNP6 Monte Carlo code system. In this experiment, a 13- and 20-MeV electron pencil beam is deflected by thin foils with atomic numbers from 4 to 79. To determine the angular distribution, the fluence is measured down range of the scattering foil at various radii orthogonal to the beam line. The characteristic angle (the angle for which the max of the distribution is reduced by 1/e) is then determined from the angular distribution and compared with experiment. Multiple scattering foils tested herein include beryllium, carbon, aluminum, copper, and gold. For the default electron-photon transport settings, the calculated characteristic angle was statistically distinguishable from measurement and generally broader than the measured distributions. The average relative difference ranged from 5.8% to 12.2% over all of the foils, source energies, and physics settings tested. This validation illuminated a deficiency in the computation of the underlying angular distributions that is well understood. As a result, code enhancements were made to stabilize the angular distributions in the presence of very small substeps. However, the enhancement only marginally improved results indicating that additional algorithmic details should be studied. [ABSTRACT FROM AUTHOR]

For modeling the isotopic composition of fuel, and maximum temperatures at different moments of time, one can use different algorithms and codes. In connection with the development of new types of fuel assemblies and progress in computer technology, the task makes important to increase accuracy in modeling of the above characteristics of fuel assemblies during the operation. Calculations of neutron-physical characteristics of fuel rods are mainly based on models using averaged temperature, thermal conductivity factors, and heat power density. In this paper, complex approach is presented, based on modern algorithms, methods and codes to solve separate tasks of thermal conductivity, neutron transport, and nuclide transformation kinetics. It allows to perform neutron-physical and thermal-physical calculation of the reactor with detailed temperature distribution, with account of temperature-depending thermal conductivity and other characteristics. It was applied to studies of fuel cell of the VVER-1000 reactor. When developing new algorithms and programs, which should improve the accuracy of modeling the isotopic composition and maximum temperature in the fuel rod, it is necessary to have a set of test tasks for verification. The proposed approach can be used for development of such verification base for testing calculation of fuel rods of VVER type reactors. [ABSTRACT FROM AUTHOR]

The objective in this paper is about economic dispatch problem of electric power generation where scheduling the committed generating units outputs so as to meet the required load demand at minimum operating cost, while satisfying all units and system equality and inequality constraint. In the operating of electric power system, an economic planning problem is one of variables that its must be considered since economically planning will give more efficiency in operational cost. In this paper the economic dispatch problem which has non linear cost function solved by using swarm intelligent method is Gaussian Particle Swarm Optimization (GPSO) and Lagrange Multiplier. GPSO is a population-based stochastic algorithms which their moving inspired by swarm intelligent and probabilities theories. To analize its accuracy, the economic dispatch solution by GPSO method will be compared with Lagrange multiplier method. From the running test result the GPSO method give economically planning calculation which it better than Lagrange multiplier method and the GPSO method faster to getting error convergence. Therefore the GPSO method have better performance to getting global best solution than the Lagrange method. [ABSTRACT FROM AUTHOR]

Copyright of ESAIM: Proceedings & Surveys is the property of EDP Sciences and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of ESAIM: Proceedings & Surveys is the property of EDP Sciences and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

This paper presents an algorithm for aerosol typing from multiwavelength lidar data, based on Artificial Neural Networks. The aerosol model used to simulate optical properties for the training of the network is described. The algorithm is tested on real observations from ESA-CALIPSO database. [ABSTRACT FROM AUTHOR]

The article is devoted to the development and research of algorithms for placing objects of complex geometric shapes. To solve the placement problem is proposed an approach which consists in transforming the shape of all objects and further application of the developed algorithm for placing orthogonal polyhedrons of arbitrary dimension to the resulting transformed objects. In the process of transforming the shape of the objects being placed, they are initially voxelized, after which the developed decomposition algorithm is applied to the resulting voxelized objects, which provides the formation of orthogonal polyhedrons consisting of the largest possible orthogonal objects. The proposed model of potential containers is used to describe the free space of containers as a set of orthogonal areas. The developed algorithm for the placement of orthogonal polyhedrons provides a fast solution to NP-hard problems of placing objects of complex geometric shapes without resorting to the use of time-consuming nonlinear programming methods. Examples of the practical application of the developed algorithms for modeling the dense layout of parts of complex geometric shapes on the platform of a 3D printer are given. [ABSTRACT FROM AUTHOR]

The proposal in this paper is to make accessible the hydrology analysis tools that were developed by our research team in the past years through an interoperable Spatial Data Infrastructure. To this aim we chose to develop add-ons for the geOrchestra OGC-compliant platform. Such add-ons trigger algorithms and retrieve their output in real time through OGC standard WPS. We then introduce a watershed WPS add-on and its functioning modes. In so doing we exemplify the fact that the use of OGC standards make it straightforward (and transparent to the user operating a common web browser) to remotely trigger a process on a distant server, then apply it to distant data present on a remote cartographic server, and drop the outcome onto a third-party cartographic server while visualizing it all on a browser. [ABSTRACT FROM AUTHOR]

Event reconstruction is a fundamental problem in the high energy physics experiments. It consists of track finding and track fitting procedures in the experiment tracking detectors. This requires a tremendous search of detector responses belonging to each track aimed at obtaining so-called "seeds", i.e. initial approximations of track parameters of charged particles. In the paper we propose a new algorithm of the seedfinding procedure for the BM@N experiment. [ABSTRACT FROM AUTHOR]

The paper analyzes the problems of scalability of modern computational systems, and offers a new paradigm for solving complex problems on them. It implies (1) Creating a virtual computing cluster with shared virtual memory, (2) Selecting a representation for the problem that minimizes the interaction between computing threads and (3) Configuring the virtual computer system for optimal mapping of the pertinent algorithm on it. Arguments for optimizing virtual clusters are given and test results on them are shown. We discuss the challenges that can be addressed most effectively within the framework of the proposed approach. [ABSTRACT FROM AUTHOR]

Copyright of ESAIM: Proceedings & Surveys is the property of EDP Sciences and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Automatic differentiation has been involved for long in applied mathematics as an alternative to finite difference to improve the accuracy of numerical computation of derivatives. Each time a numerical minimization is involved, automatic differentiation can be used. In between formal derivation and standard numerical schemes, this approach is based on software solutions applying mechanically the chain rule formula to obtain an exact value for the desired derivative. It has a cost in memory and cpu consumption. For participants of financial markets (banks, insurances, financial intermediaries, etc), computing derivatives is needed to obtain the sensitivity of their exposure to well-defined potential market moves. It is a way to understand variations of their balance sheets in specific cases. Since the 2008 crisis, regulation demands to compute this kind of exposure to many different cases, to be sure that market participants are aware and ready to face a wide spectrum of market configurations. This paper shows how automatic differentiation provides a partial answer to this recent explosion of computations to be performed. One part of the answer is a straightforward application of Adjoint Algorithmic Differentiation (AAD), but it is not enough. Since financial sensitivities involve specific functions and mix differentiation with Monte-Carlo simulations, dedicated tools and associated theoretical results are needed. We give here short introductions to typical cases arising when one uses AAD on financial markets. [ABSTRACT FROM AUTHOR]

A fast algorithm for the automated detection of buried and proud objects in three-dimensional (3-d) volumetric synthetic aperture sonar (SAS) imagery is proposed. The method establishes the positions of underwater targets by finding localized volumes of strong acoustic returns on or within the sediment. The algorithm relies on an important data-normalization step that is grounded in principled physics-based arguments, and it greatly reduces the amount of data that must be passed to a follow-on classification stage. The promise of the approach is demonstrated for man-made objects present in real, measured SAS data cubes collected at multiple aquatic sites by an experimental volumetric sonar system. [ABSTRACT FROM AUTHOR]

The detection of clouds and aerosols is important for climate research. Lidar has been widely used in atmospheric remote sensing research because of its high spatial and temporal resolution and ability to detect profiles. High spectral resolution lidar (HSRL) accurately calculates the optical properties of aerosols and clouds without relying on any assumptions. Based on the 532nm iodine HSRL system, the lidar ratio of the urban aerosol in Hangzhou is 40-50sr, and the average lidar ratio of the cirrus is 24.79sr, demonstrating that the HSRL system and retrieval algorithms accurately obtain the optical properties of clouds and aerosols. [ABSTRACT FROM AUTHOR]

We developed an algorithm to derive extinction coefficients for four aerosol components (water-soluble, dust, sea salt, black carbon) from Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) data. The algorithm was applied to the nine-year data for 2007–2015 and the results were compared to CALIOP standard product (CALIOP-ST) and MODerate resolution Imaging Spectroradiometer (MODIS) standard product (MODIS-ST). Comparisons of the total aerosol optical thickness (AOT) showed that MODIS-ST was the largest, followed by CALIOP-ST (Ver.4), and our product. CALIOP-ST (Ver.3) showed a similar magnitude to ours. [ABSTRACT FROM AUTHOR]

Numerous studies on Jet Production, Vector Boson Production, V+Jets Production and Multi-Boson Production have been carried out by the Compact Muon Solenoid (CMS) Collaboration to test perturbative quantum chromodynamics (QCD) predictions, and to put more stringent constraints on PDFs (Parton Distribution Functions). In this paper, some of these experimental results will be presented, and their possible impacts on Higgs physics and new physics searches will be discussed. [ABSTRACT FROM AUTHOR]

The solar energy alternative could provide us with all the energy we need as it exist in vast quantities all around us. We only should be innovative enough in order to improve the efficiency of our systems in capturing and converting solar energy in usable forms of power. By making a case for the solar energy alternative, we identify areas where efficiency can be improved and thereby Solar Energy can become a competitive energy source. This paper suggests an innovative approach to solar energy power production, which is manifested in a prototype given the name HelioTrope. The Heliotrope Solar Energy Production prototype is tested on its' capabilities to efficiently covert solar energy to generation of electricity and other forms of energy for storage or direct use. HelioTrope involves an innovative Stirling engine design and a parabolic concentrating dish with a sun tracking system implementing a control algorithm to maximize the capturing of solar energy. Further, it utilizes a patent developed by the authors where a mechanism is designed for the transmission of reciprocating motion of variable amplitude into unidirectional circular motion. This is employed in our prototype for converting linear reciprocating motion into circular for electricity production, which gives a significant increase in efficiency and reduces maintenance costs. Preliminary calculations indicate that the Heliotrope approach constitutes a competitive solution to solar power production. [ABSTRACT FROM AUTHOR]

We study universal quantities characterizing the second order phase transition in the Gribov process. To this end, we use numerical methods for the calculation of the renormalization group functions up to two-loop order in perturbation theory in the famous ε-expansion. Within this procedure the anomalous dimensions are evaluated using two different subtraction schemes: the minimal subtraction scheme and the null-momentum scheme. Numerical calculation of integrals was done on the HybriLIT cluster using the Vegas algorithm from the CUBA library. The comparison with existing analytic calculations shows that the minimal subtraction scheme yields more precise results. [ABSTRACT FROM AUTHOR]

The analysis of the vertical movements of the soil in the Po River plane of the Emilia-Romagna Region (Italy) was updated through an interferometric analysis referred to the 2011–2016 time-span. This activity is a continuation of previous studies on the state of knowledge of vertical soil movements in the same area, analyzed firstly by levelling and GNSS and more recently by SAR interferometry for the periods 1992–2000, 2002–2006, 2006–2011, on behalf of the Emilia-Romagna Region. The survey area analysed was approximately 13 300 km 2 , which corresponds to the territory of the regional plain. The interferometric dataset was calibrated through the use of velocity time series of several permanent GNSS stations. Among the 36 stations analysed, 22 were included in the study area: 16 were used for the calibration and 6 as check points). The velocities required for the calibration of the SAR analysis were calculated in the period following the important seismic events that struck the territory of the Emilia Romagna Region in May 2012. The interferometric analysis was carried out by TRE ALTAMIRA using the SqueeSAR™ technology. In particular, in order to update the interferometric dataset to 2016, it was necessary to perform a joint processing of the available RADARSAT-1 data and of the data acquired by the RADARSAT-2 satellite using a specific operating mode of the SqueeSAR™ algorithm known as stitching; this approach allowed the joint processing of images acquired in the same geometry by these two satellites. The study of the time series of the GNSS permanent stations used to provide the velocity datum to the interferometric analysis, is described, and the results of the SqueeSAR™ interferometric processing are reported. Statistical analyses on the spatial distribution and the type of scatterers have been performed during the screening and validation procedures of the dataset, and for the identification and removal of the outliers. Finally, the resulting map is described in order to analyse the measured soil movements with respect to the results obtained in past analyses, and the possible geological and human-induced causes, which could have produced them. [ABSTRACT FROM AUTHOR]

Copyright of ESAIM: Proceedings & Surveys is the property of EDP Sciences and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

A new event data format has been designed and prototyped by the CMS collaboration to satisfy the needs of a large fraction of physics analyses (at least 50%) with a per event size of order 1 kB. This new format is more than a factor of 20 smaller than the MINIAOD format and contains only top level information typically used in the last steps of the analysis. The talk will review the current analysis strategy from the point of view of event format in CMS (both skims and formats such as RECO, AOD, MINIAOD, NANOAOD) and will describe the design guidelines for the new NANOAOD format. [ABSTRACT FROM AUTHOR]

In April 2018, e+e- collisions of the SuperKEKB B-Factory have been recorded by the Belle II detector in Tsukuba (Japan) for the first time. The new accelerator and detector represent a major upgrade from the previous Belle experiment and will achieve a 40 times higher instantaneous luminosity. Special considerations and challenges arise for track reconstruction at Belle II due to multiple factors. This high luminosity configuration of the collider increases the beam-induced background by many factors compared to Belle and a new track reconstruction software has been developed from scratch to achieve an excellent physics performance in this busy environment. Even though on average only eleven signal tracks are present in one event, all of them need to be reconstructed down to a transverse momentum of 50 MeV and no fake tracks should be present in the event. Many analyses at Belle II rely on the advantage that the initial state in B-factories is well known and a clean event reconstruction is possible if no tracks are left after assigning all tracks to particle hypotheses. This contribution will introduce the concepts and algorithms of the Belle II tracking software. Special emphasis will be put on the mitigation techniques developed to perform track reconstruction in high-occupancy events. First results from the data-taking with the Belle II detector will be presented. [ABSTRACT FROM AUTHOR]

The reconstruction of multi-turn curling tracks is a big challenge for the drift chamber of the COMET [1] experiment. A method of deterministic annealing filter that implements a global competition between hits from different turns is introduced. This method assigns the detector measurements to the candidate track based on the weighted mean of fitting quality on different turns. We present here the study of multi-turn track fitting based on the simulated tracks. We found that the algorithm can successfully distinguish the hits from different turns. [ABSTRACT FROM AUTHOR]

Structural Health Monitoring (SHM) represents a fast-growing field of great interest specially for aerospace, civil and mechanical engineering. This work proposes an in-flight SHM method for impact detection by ultrasounds, that is based on the dynamic behavior of the inspected structure and is useful to establish critical and dangerous operational conditions. The proposed method can be used to detect impact events both in metallic or composite structures, it is specifically designed to be used on typical fuselage and wing panels and is based on the propagation of Lamb waves in the structure on which PZT sensors are bonded for receiving signals. Algorithms are implemented in order to evaluate the impact location by post-processing the acquired signals. Several test cases are numerically studied before being tested in laboratory and reproduced in-flight. A good agreement between the numerical, laboratory and in-flight results is achieved. [ABSTRACT FROM AUTHOR]

The report presents an original algorithm for solving the radiation transfer equation based on the Monte Carlo method for problems of atmospheric laser sensing, taking into account the polarization of radiation. A number of test calculations were performed to analyze the data of the polarization scanning lidar of the V.E. Zuev Institute of Atmospheric Optics SB RAS. It is shown that the proposed algorithm, taking into account the polarization, makes it possible to reduce the discrepancy in interpreting lidar data in comparison with the algorithm without taking into account polarization. [ABSTRACT FROM AUTHOR]

The aerosol optical properties have been investigated using the Raman lidar system for the month of November 2018 at the western Himalayan station of Palampur. Before deriving the optical properties, the lidar data has been applied with initial pre-processing such as Dead time correction, atmospheric noise correction, temporal and spatial averaging, range correction, gluing etc. The optical properties such as backscatter coefficient, extinction coefficient and linear depolarization ratio have been derived by using the inversion algorithm proposed by Fernald. The results show that the backscatter coefficient was found in the range from 9.00E-9 m−1sr−1 to 4.97E-6 m−1sr−1 and the extinction coefficient was found in the range from 3.16E-7m-1 to 1.74E-4m-1. The Linear depolarization ratio was in the range from 0.0179 to 0.621 with lower values at near heights suggesting the dominance of spherical particles at the lower heights. We have also observed a cloud layer at a height of 9.5 km to 12.1 km with high depolarization ratio during the observation period on 22/11/2018. [ABSTRACT FROM AUTHOR]

We report numerical investigation of the short range interaction influence on the two-dimensional quantum scattering of two dipoles. The model simulates two ultracold polar molecules collisions in two spatial dimensions. The used algorithm allows us to quantitatively analyse the scattering of two polarized dipoles with account for strongly anisotropic nature of dipolar interaction. The strong dependence of the scattering total cross section on the short range interaction radius was discovered for threshold collision energies. We also discuss differences of calculated scattering cross section dependencies for different polarisation axis tilt angles. [ABSTRACT FROM AUTHOR]

We present an efficient numerical method for the integration of the 3D Schrödinger equation. A tunneling problem of two interacting bosonic atoms confined in a 1D anharmonic trap has been successfully solved by means of this method. We demonstrate fast convergence of the final results with respect to spatial and temporal grid steps. The computational scheme is based on the operator-splitting technique with the implicit Crank-Nicolson algorithm on spatial sixth-order finite-differences. The computational time is proportional to the number of spatial grid points. [ABSTRACT FROM AUTHOR]

We describe a new algorithm for analytic calculation of high-order Hermite interpolation polynomials of the simplex and give their classification. A typical example of triangle element, to be built in high accuracy finite element schemes, is given. [ABSTRACT FROM AUTHOR]