Search

Land surface temperature (LST) is important in a variety of applications, such as urban thermal environment monitoring and water resource management. In this paper, eleven candidate split-window (SW) algorithms were adapted to Thermal Infrared Sensor-2 (TIRS-2) data of the Landsat 9 satellite for estimating the LST. The simulated dataset produced by extensive radiative transfer modeling and five global atmospheric profile databases was used to determine the SW algorithm coefficients. Ground measurements gathered at Surface Radiation Budget Network sites were used to confirm the efficiency of the SW algorithms after their performance was initially examined using the independent simulation dataset. Five atmospheric profile databases perform similarly in training accuracy under various subranges of total water vapor. The candidate SW algorithms demonstrate superior performance compared to the radiative transfer equation algorithm, exhibiting a reduction in overall bias and RMSE by 1.30 K and 1.0 K, respectively. It is expected to provide guidance for the generation of the Landsat 9 LST using the SW algorithms. [ABSTRACT FROM AUTHOR]

The NOAA-AVHRR (National Oceanographic and Atmospheric Administration–Advanced Very High-Resolution Radiometer) archive includes data from 1981 onwards, which allow for estimating land surface temperature (LST), a key parameter for the study of global warming as well as surface characterization. However, algorithms for LST retrieval were developed before the latest sensors and were based on more reduced atmospheric datasets. Here, we present 50 novel sets of coefficients for an LST retrieval algorithm from NOAA-AVHRR sensors, to which we added one historical methodology, which we validate against historical in situ as well as independent satellite data. This validation shows that the historical algorithm performs surprisingly well, with an in situ RMSE below 1.5 K and a quasi-null bias when compared with independent satellite data. A couple of the novel algorithms also perform within expectations (errors below 1.5 K), so any of these could be used for the complete processing of the AVHRR dataset. In our case, considering consistency with previous works, we opt for the use of the historical algorithm, now also tested for more recent periods. [ABSTRACT FROM AUTHOR]

Crop evapotranspiration (ET) is a key variable within the global hydrological cycle to account for the irrigation scheduling, water budgeting, and planning of the water resources associated with irrigation in croplands. Remote sensing techniques provide geophysical information at a large spatial scale and over a relatively long time series, and even make possible the retrieval of ET at high spatiotemporal resolutions. The present short study analyzed the daily ET maps generated with the S-SEBI model, adapted to Landsat-8 retrieved land surface temperatures and broadband albedos, at two different crop sites for two consecutive years (2017–2018). Maps of land surface temperatures were determined using Landsat-8 Collection 2 data, after applying the split-window (SW) algorithm proposed for the operational SW product, which will be implemented in the future Collection 3. Preliminary results showed a good agreement with ground reference data for the main surface energy balance fluxes Rn and LE, and for daily ET values, with RMSEs around 50 W/m2 and 0.9 mm/d, respectively, and high correlation coefficient (R2 = 0.72–0.91). The acceptable uncertainties observed when comparing with local ground data were reaffirmed after the regional (spatial resolution of 9 km) comparison with reanalysis data obtained from ERA5-Land model, showing a StDev of 0.9 mm/d, RMSE = 1.1 mm/d, MAE = 0.9 mm/d, and MBE = −0.3 mm/d. This short communication tries to show some preliminary findings in the framework of the ongoing Tool4Extreme research project, in which one of the main objectives is the understanding and characterization of the hydrological cycle in the Mediterranean region, since it is key to improve the management of water resources in the context of climate change effects. [ABSTRACT FROM AUTHOR]

Remotely sensed data have already become one of the major resources. Environmental monitoring with satellite data is facilitated by frequent observations at a fine spatial scale. LST images obtained by thermal infrared remote sensing can be evaluated quickly and effectively for different objects on the earth by the mean of physical, environmental and climatic characteristics. LST is a key parameter in many environmental studies related to different disciplines such as geology, hydrology, ecology, oceanography, meteorology, climatology, etc. LST variations in space and time, measured by satellite remote sensing, are used for the estimation of a multitude of geophysical variables, such as evapotranspiration, vegetation water stress, soil moisture, and thermal inertia. In this letter, we present coefficients for the most popular thermal sensors used to calculate LST from split-window (SW) algorithm. Results, temperature of basalt surface warmer than limestone surface. At the same time, annual temperature changes of limestone surface more than basalt surface. [ABSTRACT FROM AUTHOR]

It has been known and documented that the Thermal Infrared Sensor (TIRS) on-board Landsat 8 suffers from a significant stray light problem (Reuter et al., 2015; Montanaro et al., 2014a). The issue appears both as a non-uniform banding artifact across Earth scenes and as a varying absolute radiometric calibration error. A correction algorithm proposed by Montanaro et al. (2015) demonstrated great potential towards removing most of the stray light effects from TIRS image data. It has since been refined and will be implemented operationally into the Landsat Product Generation System in early 2017. The algorithm is trained using near-coincident thermal data (i.e., Terra/MODIS) to develop per-detector functional relationships between incident out-of-field radiance and additional (stray light) signal on the TIRS detectors. Once trained, the functional relationships are used to estimate and remove the stray light signal on a per-detector basis from a scene of interest. The details of the operational stray light correction algorithm are presented here along with validation studies that demonstrate the effectiveness of the algorithm in removing the stray light artifacts over a stressing range of Landsat/TIRS scene conditions. Results show that the magnitude of the banding artifact is reduced by half on average over the current (uncorrected) product and that the absolute radiometric error is reduced to approximately 0.5% in both spectral bands on average (well below the 2% requirement). All studies presented here indicate that the implementation of the stray light algorithm will lead to greatly improved performance of the TIRS instrument, for both spectral bands. [ABSTRACT FROM AUTHOR]

Land surface temperature (LST) is a key variable in the study of the energy exchange between the land surface and the atmosphere. Among the different methods proposed to estimate LST, the quadratic split-window (SW) method has achieved considerable popularity. This method works well when the emissivities are high in both channels. Unfortunately, it performs poorly for low land surface emissivities (LSEs). To solve this problem, assuming that the LSE is known, the constant in the quadratic SW method was calculated by maintaining the other coefficients the same as those obtained for the black body condition. This procedure permits transfer of the emissivity effect to the constant. The result demonstrated that the constant was influenced by both atmospheric water vapour content (W) and atmospheric temperature (T0) in the bottom layer. To parameterize the constant, an exponential approximation between Wand T0 was used. A LST retrieval algorithm was proposed. The error for the proposed algorithm was RMSE = 0.70 K. Sensitivity analysis results showed that under the consideration of NEDT = 0.2 K, 20% uncertainty in W and 1% uncertainties in the channel mean emissivity and the channel emissivity difference, the RMSE was 1.29 K. Compared with AST 08 product, the proposed algorithm underestimated LST by about 0.8 K for both study areas when ASTER L1B data was used as a proxy of Gaofen-5 (GF-5) satellite data. The GF-5 satellite is scheduled to be launched in 2017. [ABSTRACT FROM AUTHOR]

Land surface temperature (LST) retrieval is a key issue in infrared quantitative remote sensing. In this paper, a split window algorithm is proposed to estimate LST with daytime data in two mid-infrared channels (channel 66 (3.746∼4.084 μm) and channel 68 (4.418∼4.785 μm)) from Airborne Hyperspectral Scanner (AHS). The estimation is conducted after eliminating reflected direct solar radiance with the aid of water vapor content (WVC), the view zenith angle (VZA), and the solar zenith angle (SZA). The results demonstrate that the LST can be well estimated with a root mean square error (RMSE) less than 1.0 K. Furthermore, an error analysis for the proposed method is also performed in terms of the uncertainty of LSE and WVC, as well as the Noise Equivalent Difference Temperature (NEΔT). The results show that the LST errors caused by a LSE uncertainty of 0.01, a NEΔT of 0.33 K, and a WVC uncertainty of 10% are 0.4∼2.8 K, 0.6 K, and 0.2 K, respectively. Finally, the proposed method is applied to the AHS data of 4 July 2008. The results show that the differences between the estimated and the ground measured LST for water, bare soil and vegetation areas are approximately 0.7 K, 0.9 K and 2.3K, respectively. [ABSTRACT FROM AUTHOR]

Land surface temperature (LST) calculation utilizing satellite thermal images is very difficult due to the great temporal variance of atmospheric water vapor in the atmosphere which strongly affects the thermal radiance incoming to satellite sensors. In this study, Split-Window (SW) and Radial Basis Function (RBF) methods were utilized for prediction of LST using precipitable water for Turkey. Coll 94 Split-Window algorithm was modified using regional precipitable water values estimated from upper-air Radiosond observations for the years 1990–2007 and Local Split-Window (LSW) algorithms were generated for the study area. Using local algorithms and Advanced Very High Resolution Radiometer (AVHRR) data, monthly mean daily sum LST values were calculated. In RBF method latitude, longitude, altitude, surface emissivity, sun shine duration and precipitable water values were used as input variables of the structure. Correlation coefficients between estimated and measured LST values were obtained as 99.23% (for RBF) and 94.48% (for LSW) at 00:00 UTC and 92.77% (for RBF) and 89.98% (for LSW) at 12:00 UTC. These meaningful statistical results suggest that RBF and LSW methods could be used for LST calculation. [ABSTRACT FROM AUTHOR]

Abstract: The accuracy of the Land Surface Temperature (LST) product generated operationally by the EUMETSAT Land Surface Analysis Satellite Applications Facility (LSA SAF) from the data registered by the Spinning Enhanced Visible and Infrared Imager (SEVIRI) on board the geostationary METEOSAT Second Generation 2 (MSG2, Meteosat 9) satellite was assessed on two test sites in Eastern Spain: a homogeneous, fully vegetated rice field and a high-plain, homogeneous area of shrubland. The LSA SAF LSTs were compared with ground LST measurements in the conventional temperature-based (T-based) method. We also validated the LSA SAF LST product by using an alternative radiance-based (R-based) method, with ground LSTs calculated from MSG-SEVIRI channel 9 brightness temperatures (at 10.8μm) through radiative transfer simulations using atmospheric temperature and water vapor profiles together with surface emissivity data. Two lakes were also used for validation with the R-based method. Although the LSA SAF LST algorithm works mostly within the uncertainty expectation of ±2K, both validation methods showed significant biases for the LSA SAF LST product, up to 1.5K in some cases. These biases, with the LSA SAF LST product overestimating reference values, were also observed in previous studies. Nevertheless, the present work points out that the biases are related to the land surface emissivities used in the operational generation of the product. The use of more appropriate emissivity values for the test sites in the LSA SAF LST algorithm led to better results by decreasing the biases by 0.7K for the shrubland validation site. Furthermore, we proposed and checked an alternative algorithm: a quadratic split-window equation, based on a physical split-window model that has been widely proved for other sensors, with angular-dependent coefficients suitable for the MSG coverage area. The T-based validation results for this algorithm showed LST uncertainties (robust root-mean-squared-errors) from 0.2K to 0.5K lower than for the LSA SAF LST algorithm after the emissivity replacement. Nevertheless, the proposed algorithm accuracies were significantly better than those obtained for the current LSA SAF LST product, with an average accuracy difference of 0.6K. [Copyright &y& Elsevier]

The present article applies and compares three split-window (SW) algorithms, which allowed the estimation of sea surface temperature using data obtained from the Advanced Very High Resolution Radiometer (AVHRR) on board the National Oceanic and Atmospheric Administration (NOAA) series of satellites. The algorithms were validated by comparison with in situ measurements of sea temperature obtained from a hydrographical buoy located off the coast of northern Chile (21°21'S, 70°6'W; Tarapacá Region), approximately 3 km from the coast. The best results were obtained by the application of the algorithm proposed by Sobrino & Raissouni (2000). The mean and standard deviation of the differences between the temperatures measured in situ and those estimated by SW were 0.3º and 0.8ºK, respectively. [ABSTRACT FROM AUTHOR]

Land surface temperature (LST) is a significant parameter for many applications. Many studies have proposed various algorithms, such as the split-window method, for retrieving surface temperatures from two spectrally adjacent thermal infrared bands of satellite data. Each algorithm is developed for a limited study area and application. In this paper, as part of developing an optimal split-window method in the southeast of Tehran province, Iran, four commonly applied algorithms to retrieve the LST from AVHRR were compared. This study was carried out in a wheat farm site located in the Pakdasht Agricultural Region. Measurements of LST over the farm were made with a manual infrared radiometer at the time of NOAA overpass for 18 days of May to June 2004. These days were cloud free over the study area. A total of 18 NOAA images were acquired for the days that LST measurements were made. The temperatures derived by the different split-window algorithms were compared to ground truth measurements. The performance of the split window algorithms was checked with three statistical indices: root mean square error (RMSE), mean bias error (MBE) and coefficient of determination (R2). The results showed that the Ulivieri split-window algorithm produced the lowest value of RMSE and MBE (2.71 and 0.26 K, respectively) and its highest value of R2 (0.92) gave more accurate results than the other algorithms. [ABSTRACT FROM AUTHOR]

In this paper a method for evaluating land surface temperature (LST) algorithms over heterogeneous areas is presented. The evaluation was made for a set of 12 algorithms derived by using the split-window (SW) and dual-angle (DA) techniques for estimating sea and land surface temperature (SST and LST) from Advanced Along-Track Scanning Radiometer (AATSR) data. A validation of the proposed algorithms was carried out over a heterogeneous region of Morocco in the framework of the WATERMED (WATer use Efficiency in natural vegetation and agricultural areas by Remote sensing in the MEDiterranean basin) project. AATSR data and in situ measurements over this heterogenous region were compared by implementing a classification based strategy over a higher spatial resolution Landsat image. Three reference classes were considered when performing the classification from the Landsat image. Ground based measurements where then used to assign an effective surface radiometric temperature to each of these three classes. Finally, an averaging procedure based on class proportion was implemented for deriving surface radiometric temperature at the AATSR pixel scale. For this heterogeneous site, the results showed that LST can be obtained with a root mean-square error (RMSE) lower than 1.7 K from the split-window algorithms. Dual-angle algorithms, on the other hand, provided greater RMSE due to the different surfaces observed in the nadir and forward views. The results suggest that to retrieve LST from 1 km pixels over heterogeneous surfaces spatial averaging is required to improve accuracy on temperature estimation. [Copyright &y& Elsevier]

Abstract: An investigation of the detection of water stress in non-homogeneous crop canopies such as orchards using high-spatial resolution remote sensing thermal imagery is presented. An airborne campaign was conducted with the Airborne Hyperspectral Scanner (AHS) acquiring imagery in 38 spectral bands in the 0.43–12.5μm spectral range at 2.5m spatial resolution. The AHS sensor was flown at 7:30, 9:30 and 12:30GMT in 25 July 2004 over an olive orchard with three different water-deficit irrigation treatments to study the spatial and diurnal variability of temperature as a function of water stress. A total of 10 AHS bands located within the thermal-infrared region were assessed for the retrieval of the land surface temperature using the split-window algorithm, separating pure crowns from shadows and sunlit soil pixels using the reflectance bands. Ground truth validation was conducted with infrared thermal sensors placed on top of the trees for continuous thermal data acquisition. Crown temperature (T c), crown minus air temperature (T c − T a), and relative temperature difference to well-irrigated trees (T c − T R, where T R is the mean temperature of the well-irrigated trees) were calculated from the ground sensors and from the AHS imagery at the crown spatial resolution. Correlation coefficients for T c − T R between ground IRT sensors and airborne image-based AHS estimations were R 2 =0.50 (7:30GMT), R 2 =0.45 (9:30GMT) and R 2 =0.57 (12:30GMT). Relationships between leaf water potential and crown T c − T a measured with the airborne sensor obtained determination coefficients of R 2 =0.62 (7:30GMT), R 2 =0.35 (9:30GMT) and R 2 =0.25 (12:30GMT). Images of T c − T a and T c − T R for the entire field were obtained at the three times during the day of the overflight, showing the spatial and temporal distribution of the thermal variability as a function of the water deficit irrigation schemes. [Copyright &y& Elsevier]

Abstract: An experimental site was set up in a large, flat and homogeneous area of rice crops for the validation of satellite derived land surface temperature (LST). Experimental campaigns were held in the summers of 2002–2004, when rice crops show full vegetation cover. LSTs were measured radiometrically along transects covering an area of 1 km2. A total number of four thermal radiometers were used, which were calibrated and inter-compared through the campaigns. Radiometric temperatures were corrected for emissivity effects using field emissivity and downwelling sky radiance measurements. A database of ground-based LSTs corresponding to morning, cloud-free overpasses of Envisat/Advanced Along-Track Scanning Radiometer (AATSR) and Terra/Moderate Resolution Imaging Spectroradiometer (MODIS) is presented. Ground LSTs ranged from 25 to 32 °C, with uncertainties between ±0.5 and ±0.9 °C. The largest part of these uncertainties was due to the spatial variability of surface temperature. The database was used for the validation of LSTs derived from the operational AATSR and MODIS split-window algorithms, which are currently used to generate the LST product in the L2 level data. A quadratic, emissivity dependent split-window equation applicable to both AATSR and MODIS data was checked as well. Although the number of cases analyzed is limited (five concurrences for AATSR and eleven for MODIS), it can be concluded that the split-window algorithms work well, provided that the characteristics of the area are adequately prescribed, either through the classification of the land cover type and the vegetation cover, or with the surface emissivity. In this case, the AATSR LSTs yielded an average error or bias of −0.9 °C (ground minus algorithm), with a standard deviation of 0.9 °C. The MODIS LST product agreed well with the ground LSTs, with differences comparable or smaller than the uncertainties of the ground measurements for most of the days (bias of +0.1 °C and standard deviation of 0.6 °C, for cloud-free cases and viewing angles smaller than 60°). The quadratic split-window algorithm resulted in small average errors (+0.3 °C for AATSR and 0.0 °C for MODIS), with differences not exceeding ±1.0 °C for most of the days (standard deviation of 0.9 °C for AATSR and 0.5 °C for MODIS). [Copyright &y& Elsevier]

We have developed a physical-based split-window Land Surface Temperature (LST) algorithm for retrieving the surface temperature from SEVIRI/MSG1 (Spinning Enhanced Visible and Infrared Imager/Meteosat Second Generation1) data in two thermal infrared bands (IR 10.8 and IR 12.0). The proposed algorithm takes into account the SEVIRI angular dependence. The numerical values of the split-window coefficients have been obtained from a statistical regression method, using synthetic data. The look-up tables for atmospheric transmission, path radiance, and downward thermal irradiance are calculated with the MODTRAN3 code. The new LST algorithm has been tested with simulated SEVIRI/MSG1 data over a wide range of atmospheric and surface conditions. Comprehensive sensitivity and error analyses have been undertaken to evaluate the performance of the proposed LST algorithm and its dependence on surface properties, the ranges of atmospheric conditions and surface temperatures, and on the noise-equivalent temperature difference. The results show that the algorithm is capable of producing LST with a standard deviation lower than 1.5 K for viewing zenith angles lower than 50°. Since MSG1 is becoming fully operational in 2004, the proposed algorithm will allow MSG1 users to obtain surface temperatures immediately. [Copyright &y& Elsevier]

Climate change amplified by rapidly increasing urbanization is resulting in rising temperatures within urban environments. In recent years, to mitigate this the design and construction of new buildings has emphasized "smart" methods and materials for individual buildings rather than landscape-level planning and evaluation of new developments. Remote Sensing potentially offers a cost-effective means to monitor effectiveness of landscape-level urban design and guide developers to improve thermal regimes. This paper focuses on satellite monitoring of thermal variation in the area of London most affected by construction in 2010–2015. Split-window Land Surface Temperature (LST) models were applied to ASTER and Landsat 8 satellite imagery, requiring separate investigation of thermal trends due to temporal inconsistency. Getis-Ord-Gi* cluster analysis of the ASTER image identified three main thermal hot spots: Eastern, Stratford railway/underground station, and Stratford High Street. It is assumed that increased thermal stress within these areas is mainly from anthropogenic heat. However, local thermal variations for Eastern Olympic Village are attributed to changing meteorological conditions, facade materials, canyon morphology and orientation, or insufficient shading and ventilation. Future development of a new cultural hub at this location will significantly affect distribution of green spaces and influence their cooling ability. [ABSTRACT FROM AUTHOR]