Search

Athletes with a history of concussion are at a greater risk for lower extremity musculoskeletal injury. Female athletes may be at an even greater risk than male athletes. Previous researchers on postconcussion landing biomechanics have focused on the lower extremities, but the trunk plays a crucial role as an injury risk factor. To compare lower extremity and trunk biomechanics during jump-landing and cutting maneuvers between female athletes with and those without a concussion history. Cross-sectional study. Biomechanics laboratory. A total of 26 athletes (mean ± SD age = 19.0 ± 1.3 years, height = 1.68 ± 0.07 m, mass = 64.02 ± 6.76 kg, body mass index = 22.58 ± 1.97 kg/m2; median [interquartile range] time since most recent concussion = 37.5 months [25.0 months, 65.8 months]) with a concussion history and 38 athletes (age = 19.0 ± 1.1 years, height = 1.71 ± 0.08 m, mass = 64.72 ± 9.45 kg, body mass index = 22.14 ± 1.80 kg/m2) without a concussion history. Peak kinetics (vertical ground reaction force, vertical loading rate, external knee-abduction moment, and external knee-flexion moment) and kinematics (trunk-flexion angle, trunk lateral-bending angle, ankle-dorsiflexion angle, knee-flexion angle, knee-abduction angle, and hip-flexion angle) were obtained during the eccentric portion of jump-landing and cutting tasks. Separate 2 (group) × 2 (limb) between- and within-factors analyses of covariance were used to compare outcomes between groups. We covaried for time since the most recent concussion and the limb that had a history of musculoskeletal injury. Athletes with a concussion history displayed a greater peak knee-abduction angle in their nondominant limb than their dominant limb (P =.01, ηp2 = 0.107) and the nondominant limb of athletes without a concussion history (P =.02, ηp2 = 0.083) during jump landing. They also had less trunk lateral bending during cutting compared with athletes without a concussion history (P =.005, ηp2 = 0.126). Our results indicated landing biomechanics are different between female athletes with and those without a concussion history. This finding may be due to impairments in neuromuscular control postconcussion that may ultimately increase the risk of subsequent lower extremity injury, although further research is warranted given the cross-sectional nature of our study. [ABSTRACT FROM AUTHOR]

Context: It is unclear if lower-extremity joint cooling alters biomechanics during a functional movement. Objective: To investigate the effects of unilateral lower-extremity cryotherapy on movement alterations during a single-leg drop jump. Design: A crossover design. Setting: Laboratory. Patients: Twenty healthy subjects (10 males and 10 females; 23 y, 169 cm, 66 kg). Intervention(s): Subjects completed a single-leg drop jump before and after a 20-minute ankle or knee joint cooling on the right leg, or control (seated without cooling) on 3 separate days. Main outcome measures: Time to peak knee flexion, vertical ground reaction force, lower-extremity joint angular velocity (sagittal plane only), and angle and moment (sagittal and frontal planes) in the involved leg over the entire ground contact (GC; from initial contact to jump-off) during the first landing. Time to peak knee flexion was compared using an analysis of variance; the rest of the outcome measures were analyzed using functional analyses of variance (P < .05). Results: Neither joint cooling condition changed the time to peak knee flexion (F2,95 = 0.73, P = .49). Ankle joint cooling reduced vertical ground reaction force (55 N at 4% of GC), knee joint angular velocity (44°/s during 5%-9% of GC), and knee varus moment (181 N·m during 18%-20% of GC). Knee joint cooling resulted in a reduction in knee joint angular velocity (24°/s during 37%-40% of GC) and hip adduction moment (151 N·m during 46%-48% of GC), and an increase in hip joint angular velocity (16°/s during 49%-53% of GC) and plantarflexion angle (1.5° during 11%-29% of GC). Conclusion: Resuming activity immediately after lower-extremity joint cooling does not seem to predispose an individual to injury during landing because altered mechanics are neither overlapping with the injury time period nor of sufficient magnitude to lead to an injury. [ABSTRACT FROM AUTHOR]

Purpose: Individuals with mechanical ankle instability (MAI) and functional ankle instability (FAI) present with residual movement dysfunctions after an initial lateral ankle sprain. This study investigated leg stiffness control to determine how behavioural characteristics between MAI and FAI differ during single-leg drop landing movement. Methods: Thirty individuals (10 with MAI, 10 with FAI, and 10 healthy controls) participated in this study. During single-leg drop landing movement, we estimated dimensionless leg stiffness, peak vertical force (PVF), change in the displacement of leg movement, loading rate, angular joint movement, and internal joint moment for impaired and unimpaired legs, respectively. Univariate one-way analysis of variance was used for each dependent variable across leg conditions. Results: The MAI group had lower dimensionless leg stiffness with greater change in the displacement of leg movement for the impaired leg than the FAI and control groups. Moreover, reduced leg stiffness was associated with greater hip joint flexion movement in the MAI group, whereas ankle dorsiflexion movement increased to decrease the leg stiffness in the FAI and control groups. Conclusion: These findings indicate that lower leg stiffness in the MAI group than in the FAI group may be attributed to compensatory actions to minimise reliance on their ankle movement after landing. [ABSTRACT FROM AUTHOR]

We quantified the effect of lead leg selection on landing force–time characteristics during a vertical drop landing (VDL) initiated with a step‐off. Plyometric‐trained subjects (male: n = 8; female: n = 5; age =23 ± 3.3 years; body mass =74.4 ± 11.2 kg) performed 6 step‐off‐initiated VDLs from a 45‐cm box (n = 3/lead leg). Pooled and lead leg stratified between‐limb comparisons of limb‐specific initial ground contact timing, peak vertical ground reaction force (Fzpeak), and early landing‐phase impulse (Impulse100ms) were assessed by a two‐factor, within‐subject ANOVA, and limb symmetry indexes were calculated (α = 0.05). Pooled data showed that the lead leg made contact prior to the trail leg and contributed a greater fraction to Fzpeak compared with the trail leg. Stratifying trials by lead leg selection led to significant between‐limb differences in Fzpeak (p < 0.05) and Impulse100ms (p < 0.01) with the right leg leading but not with the left leg leading. Lead leg selection in step‐off‐initiated VDLs influenced landing performance and limb symmetry indexes of variables associated with lower limb injury risk, suggesting the need to control for lead leg selection in these tasks. A step‐off may not be a suitable technique to initiate landing tasks when assessing limb symmetry. [ABSTRACT FROM AUTHOR]

Background: When landing from a jump or a drop, muscles contract before touchdown to anticipate imminent collision with the ground, soften ground contact and allow to return to a stable standing position without stepping or rebounding.Research Question: This study assesses the effect of the unsteadiness of the environment on the motor control of landing. The 'unsteady environment' was induced by asking participants to perform drop landings inside an aircraft that underwent trajectories parallel to Earth's surface. The participants also performed the same task in a 'steady environment' in our laboratory.Methods: Ground reaction forces, lower limb joints' movements and the activity of lower limb muscles were recorded. The stability of the landing was assessed by the vertical and anterior-posterior stability indexes, center of pressure measures and by the coefficient of variation of kinetic and kinematic parameters.Results: On one hand, participants slowdown their joint movements and reduce the knee joint excursion during landing, probably to avoid excessive movements that may induce imbalance. On the other hand, the stability of the landing is reduced while the variability of the movement is increased, illustrating a less stable and less consistent landing. In addition, whatever the environment, landing parameters associated with increased stiffness (i.e., increased impact forces and decreased joint range of motion) are correlated with decreased landing stability.Significance: Overall, landings in the'unsteady environment' appear to be more cautious but less stable and less finely tuned. Since the stability of the landing is not directly influenced by the steadiness of the environment, this more cautious behavior could be, at least in part, related to the fear/apprehension induced by sudden acceleration variations of the frame of the aircraft. [ABSTRACT FROM AUTHOR]

BACKGROUND: It remains unclear if plyometric training as a single component could improve landing mechanics that are potentially associated with lower risk of ACL injury in the long term OBJECTIVE: The purpose of this study was to investigate the influence of experience undertaking plyometrics on landing biomechanics in female athletes. METHODS: Non-jumpers with little experience in plyometric training (12 female college swimmers) and jumpers with five years of experience in plyometric training (12 female college long jumpers and high jumpers) were recruited to participate in two testing sessions: an isokinetic muscle force test for the dominant leg at 120 ∘ /s and a 40-cm drop landing test. An independent t test was applied to detect any significant effects between cohorts for selected muscle force, kinematic, kinetic, and electromyography variables. RESULTS: While female jumpers exhibited greater quadriceps eccentric strength (P = 0.013) and hamstring concentric strength (P = 0.023) during isokinetic testing than female swimmers, no significant differences were observed in kinematics, kinetics, and muscle activities during both drop landing and drop jumping. CONCLUSIONS: The results suggest that the female jumpers did not present any training-induced modification in landing mechanics regarding reducing injury risks compared with the swimmers. The current study revealed that plyometric training as a single component may not guarantee the development of low-risk landing mechanics for young female athletes. [ABSTRACT FROM AUTHOR]

BACKGROUND: It remains unclear if plyometric training as a single component could improve landing mechanics that are potentially associated with lower risk of ACL injury in the long term OBJECTIVE: The purpose of this study was to investigate the influence of experience undertaking plyometrics on landing biomechanics in female athletes. METHODS: Non-jumpers with little experience in plyometric training (12 female college swimmers) and jumpers with five years of experience in plyometric training (12 female college long jumpers and high jumpers) were recruited to participate in two testing sessions: an isokinetic muscle force test for the dominant leg at 120 ∘ /s and a 40-cm drop landing test. An independent t test was applied to detect any significant effects between cohorts for selected muscle force, kinematic, kinetic, and electromyography variables. RESULTS: While female jumpers exhibited greater quadriceps eccentric strength (P = 0.013) and hamstring concentric strength (P = 0.023) during isokinetic testing than female swimmers, no significant differences were observed in kinematics, kinetics, and muscle activities during both drop landing and drop jumping. CONCLUSIONS: The results suggest that the female jumpers did not present any training-induced modification in landing mechanics regarding reducing injury risks compared with the swimmers. The current study revealed that plyometric training as a single component may not guarantee the development of low-risk landing mechanics for young female athletes. [ABSTRACT FROM AUTHOR]

This article looks into the effects of the initial knee flexion angle at the contact time on the peak of the impulsive lower limb forces during landing, and how these effects are related to muscular activities. The impact dynamics of drop landing is studied via a musculoskeletal model with eight Hill-type lower-limb muscles. A method is proposed for the representation of two landing strategies: landing with high and low joint stiffness. Then, in each landing strategy, the effect of the initial knee flexion angle on the peak ground reaction force (GRF), the peak knee ligaments force and the peak tibiofemoral contact force is investigated by considering different initial contact postures. It is observed that while landing with a flexed knee decreases the peak GRF in both landing strategies, it decreases the peak tibiofemoral and knee ligaments forces only in landing with low joint stiffness. Specifically, by increasing the initial knee flexion from 0° to 70°, the peak tibiofemoral and knee ligaments forces decrease monotonically by 54% and 82%, in landing with low joint stiffness. For high joint stiffness, however, as the initial knee flexion increases from 10° to 70°, the peak tibiofemoral force is seen to increase monotonically by 42% and the peak knee ligaments force is seen to have a non-monotonic behavior, first decreasing by 42%, and then, increasing by 250%. These results can be considered in training landing strategies to reduce the risk of knee injury. [ABSTRACT FROM AUTHOR]

This study investigated the relationship between front foot contact (FFC) ground reaction forces (GRF) during the delivery stride, lower-limb strength, eccentric dexterity and power, and ball release speed (BRS) among pace bowlers. Thirteen high-level male pace bowlers performed double and single leg drop landings; isometric mid-thigh pull; countermovement jump; and pace bowling (two-over bowling spell measuring BRS and FFC GRF). The relationship between assessed variables and BRS was determined via frequentist and Bayesian multiple linear regression. The model including peak braking force was the most probable given the data (Bayes Factor=1.713) but provided only weak evidence in comparison to the null model. The results of frequentist and Bayesian modelling were comparable with peak braking force explaining 23.3% of the variance in BRS (F(1, 11)=4.64, P=0.054). Results indicate pace bowlers with greater peak braking GRF during FFC generally elicit higher BRS. However, the weak relationship between peak braking force and BRS, and the lack of a linear relationship between BRS and other variables, highlights the complexities and inter-individual variability inherent to pace bowling at a high-level. A more individual-focused analysis revealed varied strategies within pace bowlers to deliver the outcome (e.g., BRS) and should be considered in future study designs. [ABSTRACT FROM AUTHOR]

The quantification of plantar pressure distribution is widely done in the diagnosis of lower limbs deformities, gait analysis, footwear design, and sport applications. To date, a number of pressure insole layouts have been proposed, with different configurations according to their applications. The goal of this study is to assess the validity of a 16-sensors (1.5 × 1.5 cm) pressure insole to detect plantar pressure distribution during different tasks in the clinic and sport domains. The data of 39 healthy adults, acquired with a Pedar-X® system (Novel GmbH, Munich, Germany) during walking, weight lifting, and drop landing, were used to simulate the insole. The sensors were distributed by considering the location of the peak pressure on all trials: 4 on the hindfoot, 3 on the midfoot, and 9 on the forefoot. The following variables were computed with both systems and compared by estimating the Root Mean Square Error (RMSE): Peak/Mean Pressure, Ground Reaction Force (GRF), Center of Pressure (COP), the distance between COP and the origin, the Contact Area. The lowest (0.61%) and highest (82.4%) RMSE values were detected during gait on the medial-lateral COP and the GRF, respectively. This approach could be used for testing different layouts on various applications prior to production. [ABSTRACT FROM AUTHOR]

This study examined the effect of wearing time on comfort perception and landing biomechanics of basketball shoes with different midsole hardness. Fifteen basketball players performed drop landing and layup first step while wearing shoes of different wearing time (new, 2-, 4-, 6- and 8-week) and hardness (soft, medium and hard). Two-way ANOVA with repeated measures was performed on GRF, ankle kinematic and comfort perception variables. Increased wearing time was associated with poorer force attenuation and comfort perception during landing activities (p < 0.05). The new shoes had significantly smaller forefoot (2- and 4-week) and rearfoot peak GRF impacts (all time conditions) in drop landing and smaller rearfoot peak GRF impact (6- and 8-week) in layup; shoes with 4-week of wearing time had significantly better perceptions of forefoot cushioning, forefoot stability, rearfoot cushioning, rearfoot stability and overall comfort than the new shoes (p < 0.05). Compared with hard shoes, the soft shoes had better rearfoot cushioning but poorer forefoot cushioning (p < 0.05). Shoe hardness and wearing time would play an influential role in GRF and comfort perception, but not in ankle kinematics. Although shoe cushioning performance would decrease even after a short wearing period, the best comfort perception was found at 4-week wearing time. [ABSTRACT FROM AUTHOR]

• Lateral ankle sprain injury mechanics are often examined in laboratory research. • Ankle joint and impact kinetics were examined during inversion perturbations. • Anticipating inversion perturbations altered ankle joint and impact kinetics. • Researchers should use protocols that mitigate anticipatory responses. Anticipatory responses to inversion perturbations can prevent an accurate assessment of lateral ankle sprain mechanics when using injury simulations. Despite recent evidence of the anticipatory motor control strategies utilized during inversion perturbations, kinetic compensations during anticipated inversion perturbations are currently unknown. The purpose of this investigation was to examine the influence of anticipation to an inversion perturbation during a single-leg drop landing on ankle joint and impact kinetics. Fifteen young adults with no lateral ankle sprain history completed unanticipated and anticipated single-leg drop landings onto a 25° laterally inclined platform from a height of 30 cm. One-dimensional statistical parametric mapping (SPM) was used to analyze net ankle moments and ground reaction forces (GRF) during the first 150 ms post-landing, while peak GRFs, time to peak GRF, peak and average loading rates were compared using a dependent samples t -test (p ≤ 0.05). Results from the SPM analysis revealed significantly greater plantar flexion moment from 58 to 83 ms post-landing (p = 0.004; d = 0.64–0.77), inversion moment from 89 to 91 ms post-landing (p = 0.050; d = 0.58–0.60), and medial GRF from 62 to 97 ms post-landing (p < 0.001; d = 1.00–2.39) during the unanticipated landing condition. Moreover, significantly greater peak plantarflexion (p < 0.001; d = 1.10) and peak inversion moment (p = 0.007; d = 0.94), as well as greater peak (p = 0.002; d = 1.03) and average (p = 0.042; d = 0.66) medial loading rates, were found during the unanticipated landing condition. Our findings suggest alterations to ankle joint and impact kinetics occur during a single-leg drop landing when inversion perturbations are anticipated. Researchers and practitioners using drop-landings onto a tilted surface to assess lateral ankle sprain injury risk should consider implementing protocols that mitigate anticipatory responses. [ABSTRACT FROM AUTHOR]

Purpose: Overuse injuries are common in sport, but complete understanding of injury risk factors remains incomplete. Although biomechanical studies frequently examine musculoskeletal injury mechanisms, human movement variability studies aim to better understand neuromotor functioning, with proposed connections between overuse injury mechanisms and changes in motor variability.Method: In a narrative review, we discuss the variability-overuse injury hypothesis, which suggests repeated load application leads to mechanical tissue breakdown and subsequent injury when exceeding the rate of physiological adaptation. Due to the multidisciplinary nature of this hypothesis, we incorporate concepts from motor control, neurophysiology, biomechanics, as well as research design and data analysis. We therefore summarize multiple perspectives while proposing theoretical relationships between movement variability and lower extremity overuse injuries.Results: Experimental data are presented and summarized from published experiments examining interactions between experimental task demands and movement variability in the context of drop landing movements, along with comparisons to previous movement variability studies.Conclusion: We provide a conceptual framework for sports medicine researchers interested in predicting and preventing sports injuries. Under performance conditions with greater task demands, we predict reduced trial-to-trial movement variability that could increase the likelihood of overuse injuries. [ABSTRACT FROM AUTHOR]

Abstract Non-contact anterior cruciate ligament (ACL) injuries account for 70% of all ACL injuries, and can lead to missed time from activity for athletes and a predisposition for knee osteoarthritis. Prior research has shown that athletes who land in a stiff manner, with larger internal knee adduction and extension moments, are at greater risk for an ACL injury. A three-dimensional accelerometer placed at the tibial tuberosity may prove to be a low-cost means of assessing these risk factors. The primary purpose of this study was to compare tibial accelerations during drop landings with kinematic and kinetic risk factors for ACL injury measured with three-dimensional motion capture. The secondary purpose of this study was to compare these measures between soft and stiff landings. Participants were instructed to land bilaterally in preferred, soft, and stiff manners. Peak knee flexion decreased significantly from soft to stiff landings. Peak internal knee extension moment, peak anterior/posterior knee acceleration, and peak medial knee acceleration all increased significantly from soft to stiff landings. No associations were found between landing condition and either frontal plane knee angle at maximum vertical ground reaction force or peak internal knee adduction moment. Significant positive associations between kinetics and accelerations were found only in the sagittal plane. As such, while a three-dimensional accelerometer could discern between soft and stiff landings in both planes, it may be better suited to predict kinetic risk factors in the sagittal plane. [ABSTRACT FROM AUTHOR]

Context: Several tasks have been used to examine landing biomechanics for evaluation and rehabilitation, especially as related to anterior cruciate ligament injuries. However, comparing results among studies in which different tasks were used can be difficult, and it is unclear which task may be most appropriate. Objective: To compare lower extremity biomechanics across 5 commonly used landing tasks. Design: Descriptive laboratory study. Setting: University-operated US Air Force Special Operations Forces human performance research laboratory. Patients or Other Participants: A total of 65 US Air Force Special Tactics Operators (age ± 27.7 6 5.0 years, height ± 176.5 6 5.7 cm, mass ± 83.1 6 9.1 kg). Intervention(s): Kinematic and kinetic analysis of doubleand single-legged drop landing, double- and single-legged stop jump, and forward jump to single-legged landing. Main Outcome Measure(s): Hip-, knee-, and ankle-joint kinematics; knee-joint forces and moments; and ground reaction forces (GRFs) were the dependent measures. We used repeated-measures analyses of variance or Friedman tests, as appropriate, to assess within-subject differences across tasks. Results: Peak vertical GRF and peak knee-flexion angle were different among all tasks (P , .001). Single-legged landings generated higher vertical GRF (v2 ± 244.68, P , .001) and lower peak knee-flexion values (F4,64 ± 209.33, P , .001) except for forward jump to single-legged landing, which had the second highest peak vertical GRF and the lowest peak knee-flexion value. The single-legged drop landing generated the highest vertical (v2 ± 244.68, P , .001) and posterior (v2 ± 164.46, P , .001) GRFs. Peak knee-valgus moment was higher during the double-legged drop landing (v2 ± 239.63, P , .001) but similar for all others. Conclusions: Different landing tasks elicited different biomechanical responses; no single task was best for assessing a wide range of biomechanical variables related to anterior cruciate ligament injuries. Therefore, depending on the goals of the study, using multiple assessment tasks should be considered. [ABSTRACT FROM AUTHOR]

Although landing in a plantarflexion and inversion position is a well-known characteristic of lateral ankle sprains, the associated kinematics of the knee and hip is largely unknown. Therefore, the purpose of this study was to examine the changes in knee and hip kinematics during landings on an altered landing surface of combined plantarflexion and inversion. Participants performed five drop landings from 30 cm onto a trapdoor platform in three different conditions: flat landing surface, 25° inversion, or a combined 25° plantarflexion and 25° inversion. Kinematic data were collected using a seven camera motion capture system. A 2 × 3 (leg × surface) repeated measures ANOVA was used for statistical analysis. The combined surface showed decreased knee and hip flexion range of motion (ROM) and increased knee abduction ROM (p < 0.05). The altered landing surface creates a stiff landing pattern where reductions in sagittal plane motion are transferred to the frontal plane, resulting in increased knee abduction. A stiff landing pattern is frequently related to increased risk of anterior cruciate ligament injury. It may be beneficial for athletes at risk to train for alternate methods of increasing their sagittal plane motion of the knee and hip with active knee or trunk flexion. [ABSTRACT FROM AUTHOR]

The ankle joint’s role in shock absorption during landing has been researched in many studies, which have found that landing with higher amounts of plantarflexion (PF) results in lower peak vertical ground reaction forces and loading rates. However, there has not yet been a study that compares drop landings within participants along a quantitative continuum of PF angles. Using a custom-written real-time feedback program, participants adjusted their ankles to an instructed PF angle and dropped onto two force platforms. For increasing PF, peak ground reaction force and peak loading rate during weight acceptance decreased significantly. The hip’s contribution to peak support moment decreased as PF at initial contact increased up to 30°. The ankle and knee contributions increased over this same continuum of PF angles. There appears to be no optimal PF angle based on peak ground reaction force and loading rate measurements, but there may be an optimum where joint contributions to peak support moment converge and the hip moment’s contribution is minimised. [ABSTRACT FROM AUTHOR]

Context: People with chronic ankle instability (CAI) exhibit less weight-bearing dorsiflexion range of motion (ROM) and less knee flexion during landing than people with stable ankles. Examining the relationship between dorsiflexion ROM and landing biomechanics may identify a modifiable factor associated with altered kinematics and kinetics during landing tasks. Objective: To examine the relationship between weightbearing dorsiflexion ROM and single-legged landing biomechanics in persons with CAI. Design: Cross-sectional study. Setting: Laboratory. Patients or Other Participants: Fifteen physically active persons with CAI (5 men, 10 women; age = 21.9 ± 2.1 years, height = 168.7 ± 9.0 cm, mass = 69.4 ± 13.3 kg) participated. Intervention(s): Participants performed dorsiflexion ROM and single-legged landings from a 40-cm height. Sagittal-plane kinematics of the lower extremity and ground reaction forces (GRFs) were captured during landing. Main Outcome Measure(s): Static dorsiflexion was measured using the weight-bearing-lunge test. Kinematics of the ankle, knee, and hip were observed at initial contact, maximum angle, and sagittal displacement. Sagittal displacements of the ankle, knee, and hip were summed to examine overall sagittal displacement. Kinetic variables were maximum posterior and vertical GRFs normalized to body weight. We used Pearson product moment correlations to evaluate the relationships between dorsiflexion ROM and landing biomechanics. Correlations (r) were interpreted as weak (0.00-0.40), moderate (0.41- 0.69), or strong (0.70-1.00). The coefficient of determination (r²) was used to determine the amount of explained variance among variables. Results: Static dorsiflexion ROM was moderately correlated with maximum dorsiflexion (r = 0.49, r² = 0.24), ankle displacement (r = 0.47, r² = 0.22), and total displacement (r = 0.67, r² = 0.45) during landing. Dorsiflexion ROM measured statically and during landing demonstrated moderate to strong correlations with maximum knee (r = 0.69-0.74, r² = 0.47-0.55) and hip (r = 0.50-0.64, r² = 0.25-0.40) flexion, hip (r = 0.53- 0.55, r² = 0.28-0.30) and knee (r = 0.53-0.70, r² = 0.28-0.49) displacement, and vertical GRF (-0.47- -0.50, r² = 0.22-0.25). Conclusions: Dorsiflexion ROM was moderately to strongly related to sagittal-plane kinematics and maximum vertical GRF during single-legged landing in persons with CAI. Persons with less dorsiflexion ROM demonstrated a more erect landing posture and greater GRF. [ABSTRACT FROM AUTHOR]

Inhibitions in the acquisition of accurate information about the environment can affect control of the lower extremities and lead to anterior cruciate ligament injury. This study aimed to clarify the effects of limited prior knowledge of the height of the fall, as well as limited visual input, on lower limb and trunk motion and ground reaction force during landing. Twenty healthy university students were recruited. Drop landings from a 30-cm platform were measured under three conditions: (1) unknown, without prior knowledge of the height of the fall and without visual input; (2) known, with prior knowledge of the height of the fall and without visual input; and (3) control, with prior knowledge of the height of the fall and visual input. In the unknown condition, the peak ground reaction force for the vertical and posterior directions was significantly higher than that in the known and control conditions; leg and knee stiffness, ankle joint work, and joint flexion motion of the knee, ankle, and trunk after landing were decreased as well. In the known condition, there were no significant differences in leg and knee stiffness and vertical ground reaction force compared to the control condition. The results of this study indicate that the risk of anterior cruciate ligament injury during landing increases when individuals have limited visual input and prior knowledge of the height of the fall. This finding suggests that an accurate perception of the surrounding environment may help prevent anterior cruciate ligament injuries. • The effect of prior knowledge of the height the fall on landing was examined. • Lower limb joint motion was small when participants were not informed of the height the fall. • The ground reaction force was large when participants were not informed of the height the fall. • Accurate perception of one's falling height may help prevent anterior cruciate ligament injury. [ABSTRACT FROM AUTHOR]

Abstract: The biomechanical difference between the dominant and non-dominant limb has seldom been studied during double-leg landing. The objective of this study was to evaluate the effectiveness of limb laterality on the ankle kinematics, kinetics and electromyogram (EMG) during drop landing. Sixteen healthy adults were recruited and dropped individually from platforms with three different heights (0.32m, 0.52m, and 0.72m). The ground reaction force, ankle joint kinematics, and surface EMG of tibialis anterior (TA) and lateral gastrocnemius (LG) were measured in both lower extremities. Two-way analysis of variance was used to analyze the effects of laterality and dropping height. The peak angular velocities in dorsiflexion and abduction were significantly higher in the dominant ankle, whereas the pre- and post-landing EMG amplitudes of the TA were significantly higher in the non-dominant limb. Compared with the dominant side, the non-dominant ankle has a more effective protective mechanism in that excessive joint motion is restrained by greater ankle flexor activity. Compared with the non-dominant side, the dominant ankle joint is in greater injury risk during drop landing, and data measured in the dominant limb may produce more conservative conclusions for injury protection or prediction. [Copyright &y& Elsevier]

The article examines the association of lower-extremity and frontal plane motions in squatting and landing, the existence of gender differences and the relationship of squat or hip abduction strength with knee valgus while landing. It notes that squat strength and observing squat kinematics is not likely the method of identifying those at risk on anterior cruciate ligament (ACL) injuries, however, women may have hip abduction strength. The discussion of the findings is also included.

The purpose of this study was to determine the reliability and validity of a portable force plate when analyzing jumping and landing tasks. Subjects performed 3 drop vertical jumps and 3 drop landings on both a standard strain gauge laboratory force plate and a portable force plate. In contrast to typical laboratory installed force plates, the portable 6-component force plate can be easily transported and used onsite at various training or data collection sites and incorporates Hall effect technology. The measured parameters included maximum force and time to maximum force for initial stance of the both tests, maximum takeoff force, and time to maximum takeoff force for the drop vertical jump. The Pearson correlation coefficients for the drop landing and the drop vertical jump for maximum force (r = 0.942, r = 0.940), time to maximum force (r = 0.891, r = 0.920) and for drop jump maximum jumping force (r = 0.971), and time to maximum takeoff force (r = 0.917) were all high and indicate that the force data collected by a resistor-type portable force plate provide similar measures to a standard strain-gauge laboratory force plate. Additionally, the within session reliability of the drop landing and the drop vertical jump measured by the portable force plate showed high interclass correlation coefficients for examined variables of 0.979 and 9.67 for maximum landing force and 0.917 and 0.920 for time to maximum landing force, respectively. The interclass correlation coefficients for the maximum takeoff force and time to maximum takeoff force during the drop vertical jump were 0.991 and 0.86. The results indicate the force and timing measurements from the portable force plate were both valid and reliable. Use of the portable force plate may facilitate methods of force measurement that can be applied out into the field and therefore a valuable tool for on site landing and jump force measurements in a variety of settings for large numbers of subjects. [ABSTRACT FROM AUTHOR]

Simple Summary: Athlete experience high impact forces during landing, which is a contributing factor to injury risk potentials. As a potential factor of affecting the impact force, previous study of the effects of footwear cushioning effect on landing biomechanics were inconsistent. Furthermore, limited efforts have been exerted on the relationship between footwear cushioning and fatigue. In this study, the footwear cushioning effects on bipedal landing biomechanics before and after acute exercise-induced fatigue protocol were explored. The results of this study suggest that footwear cushioning can reduce landing-related rearfoot impact forces regardless of fatigue conditions. In a situation where the neuromuscular activity is reduced or absent, e.g., post-fatigue, wearing better cushioning shoes show superior attenuation, as indicated by low forefoot and rearfoot impacts. Purpose: this study aimed to investigate the footwear cushioning effects on impact forces and joint kinematics of the lower extremity during bipedal drop landings before and after acute exercise-induced fatigue protocol. Methods: in this case, 15 male collegiate basketball athletes performed drop landings from a 60 cm platform wearing highly-cushioned shoes (HS) and less cushioned shoes (control shoes, CS) before and after acute fatigue-inducing exercises (i.e., shuttle run combined with multiple vertical jumps). Force plates and motion capturing systems were synchronised to measure ground reaction forces and kinematic data during drop landings. Maximum jump height was analysed with one-way ANOVA. Two-way repeated measure ANOVAs were performed on each of the tested variables to examine if there was significant main effects of shoe and fatigue as well as the interaction. The significance level was set to 0.05. Results: rearfoot peak impact forces and loading rates significantly reduced when the participants wore HS in pre- and post-fatigue conditions. The peak loading rates in forefoot significantly reduced when HS were worn in post-fatigue. Compared with pre-fatigue, wearing HS contributed to with 24% and 13% reduction in forefoot and rearfoot peak loading rates, respectively, and the occurrence times of first and second peak impact forces and loading rates were much later. In the post-fatigue, a significant increase in the initial contact and minimum angles of the ankle were observed in HS compared with CS. Conclusion: these findings suggest that footwear cushioning can reduce landing-related rearfoot impact forces regardless of fatigue conditions. In a situation where the neuromuscular activity is reduced or absent such as post-fatigue wearing better cushioning shoes show superior attenuation, as indicated by lower forefoot and rearfoot impacts. [ABSTRACT FROM AUTHOR]

Anterior cruciate ligament (ACL) injury is a common and severe knee injury in sports. Knee flexion, abduction and internal rotation angles are considered crucial biomechanical indicators of the ACL injury risk but currently are computed in a laboratory with an optical motion capture. This paper introduces an inertial measurement unit (IMU) based algorithm for knee flexion, abduction and internal rotation estimation during ACL injury risk assessment tests, including drop landing and cutting tasks. This algorithm includes a special two-step complementary-based orientation filter and a special single-pose sensor-to-segment calibration procedure. Fourteen healthy subjects performed double-leg, single-leg drop landing and cutting tasks. Each subject wore four IMUs and reflective marker clusters on their thighs and shanks. For the presented knee angles algorithm with an empirical initial segment orientation, the root mean square errors (RMSEs) of the estimated continuous knee flexion, abduction and internal rotation cross all the movement tasks were 1.07°, 2.87° and 2.64°, and RMSEs of the peak knee flexion and peak knee abduction errors were 1.22° and 3.82°. The knee angles algorithm was capable of estimating knee abduction and internal rotation angles during drop landing and cutting tasks, and knee flexion estimation was substantially more accurate than previously reported approaches. Additionally, we found that for the presented algorithm, the accuracy of initial segment orientation was a critical factor for knee abduction and internal rotation estimations. The presented IMU-based knee angles algorithm could serve as a foundation to enable in-field biomechanical ACL injury risk assessment. [ABSTRACT FROM AUTHOR]

• Drop landing was modelled by a multibody system to assess a risk of sports injuries. • Measured and model-predicted impact ground reaction forces (GRFs) showed agreement. • Knee valgus torque was estimated for measured and hypothetical landing kinematics. • Landing kinematics generating high impact GRF and valgus torques were identified. This study aimed to validate a simple dynamic model of single-leg drop-landing to develop a methodological foundation for investigating mechanistic causes of anterior cruciate ligament (ACL) injury and to explore mechanical associations between knee valgus torque and landing kinematics that are considered clinically as a high-risk landing posture for the injury. A triple-inverted-pendulum model in three-dimensional space, composed of rigid-links of head-arms-trunk (HAT), thigh and shank, was employed. We derived causal relationships that can predict post-impact kinetics, including impact ground reaction forces (GRFs) and corresponding knee joint torques from a given body-kinematics immediately before impact, based on an assumption of a completely inelastic collision between a landing foot (the distal end-point of the shank in the model) and the ground. The concordance correlation coefficient (CCC) analysis revealed that our model can achieve an acceptable agreement between experimentally measured and model-predicted impact GRFs and corresponding knee joint torques. The 95 % one-tailed lower confidence limit of CCC of vertical, mediolateral GRFs and the varus/valgus torque were 0.665 > ρ c , a = 0.643 , 0.786 > ρ c , a = 0.758 and 0.531 > ρ c , a = 0.508 , respectively, for the least acceptable values ρ c , a . Using this model, effects of three types of hypothetical pre-impact kinematics with modulated (i) medial/lateral leaning HAT angle, (ii) forward/backward HAT tilt-angle, and (iii) knee flexion/extension angle on the impact GRF and corresponding knee joint torque were evaluated. We showed that the smaller knee flexion and the greater HAT leaning toward the landing-limb-side, the larger the knee valgus torque is generated, as a mechanical consequence between the specific pre-impact kinematics and the knee loading associated with the risk of ACL injury. Further exploration of hypothetical kinematics using the model in the future work might contribute to identifying the risky landing kinematics beyond experimental limitations. [ABSTRACT FROM AUTHOR]