Search

Introduction: The literature around use of Large Diameter Heads (LDH) is abundantly available for revision Total Hip Arthroplasty (THA) but is lacking for primary uncomplicated THA. This systematic review was undertaken to synthesize data around primary THA involving LDH and analyze the associated complications (dislocation, volumetric wear, implant survivorship and functional score) along with reported effects on range of motion (ROM), patient reported outcomes and impingement rate/groin pain. Methods: A PRISMA compliant systematic review was done using extensive search in PubMed database, along with offline search looking for the literature published in English language between 2008 and 2018. The articles providing data on the use of large diameter heads (LDH) (36 mm or larger) on various bearing surfaces were collected. This included robust national joint registries of different countries. Narrative approach to data synthesis was used. Results: A total of 23 papers met our inclusion criteria, including six national joint registries. It was observed that LDH had significantly low dislocation rates, excellent implant survival rate as per Kaplan–Meier survivorship (> 90% at five years). Surgical approaches, except Minimally Invasive Surgery (MIS), did not increase any risk of dislocation as long as it was meticulously repaired. There was no significant improvement in any functional scores or improved ROM. Conclusions: LDH of 32–36 mm are now commonly used in primary THA and is accepted as a popular size. The beneficial effects of a large head size are negated beyond 38 mm. The most favored size for LDH THA, therefore, is 36 mm contrary to the older literature favoring 28 mm. [ABSTRACT FROM AUTHOR]

Introduction: We have investigated the revision rates of all bearing surface combinations for primary total hip replacement (THR) registered on the New Zealand Joint Registry (NZJR) to determine which coupling has been the most durable and successful over the last 16 years. Methods: There were 106,139 primary THRs registered, resulting in 4,960 revisions for any cause. We examined all-cause revision rates, reasons for revision and performed survival analyses. Results: Ceramic-on-highly cross-linked polyethylene (CoPx) had the lowest all-cause revision rate of 0.54/100-component-years (cys) (95% confidence interval 0.48 to 0.61). This was superior to all other hard-on-soft bearing combinations in unadjusted analysis. Furthermore, the age of patients receiving CoPx was significantly lower than for metal-on-polyethylene (mean 62.9; standard deviation [SD] 10.1 vs. 69.1; SD 9.6; p<0.001). Acetabular loosening was the reason for revision in 14.5% of CoPx, compared to 33% of MoP THRs (p<0.001). Metal-on-metal bearings had the highest revision rate of 1.43/100 cys and were significantly inferior to CoPx (p<0.001). Kaplan-Meier analysis and Cox regression analyses were performed and we adjusted the analyses to control for age, femoral head size, surgical approach and fixation. Conclusions: CoPx remained the most durable and successful coupling used in primary THR in New Zealand irrespective of age, gender or size of femoral head. [ABSTRACT FROM AUTHOR]

Background: Most literature in the field of total hip arthroplasty (THA) for fused hips, until date has reported the results of using metal on polyethylene and ceramic on polyethylene bearings. Results of THA using ceramic on ceramic (CoC) bearings in fused hips have not been published in literature. This study reports the results of cementless THA using CoC articulation perfomed in fused hips. Materials and Methods: Twenty-three patients (25 hips) with fused hips underwent conversion to THA using CoC bearings and were followed up for a mean 5.4 years. The conventional posterolateral approach was used in 15 hips, a modified two incision technique in 7 hips and a direct lateral approach with greater trochanteric osteotomy in 3 hips. Postoperatively, range of motion exercises were encouraged after 2-3 days of bed rest and subsequent gradual weight bearing using crutches was begun. Results: Mean Harris hip score improved from 42.4 to 84.2 and mean leg lengthening of 36.6 mm was achieved. In the average 5.4 years (range 2.8-9.1 years) followup there were no cases with osteolysis around acetabular cup and femoral stem. In this study, there was no case of ceramic fracture. There was one case of squeaking. Conclusion: This study suggests that cementless THA performed for fused hips with CoC bearings can provide good early clinical results. [ABSTRACT FROM AUTHOR]

Abstract: Second-generation metal-on-metal total hip arthroplasty (THA) was introduced in the early 1990s to address osteolysis and aseptic loosening resulting from polyethylene wear. We present a comparison between the Transcend metal-on-metal and Interseal metal-on-polyethylene THAs. Thirty-seven hips with Transcend metal bearings and 36 hips with Interseal polyethylene acetabular liners but identical acetabular shells were reviewed to determine clinical performance, radiographic changes, and survivorship. Patients with higher anticipated activity levels were selected to receive the Transcend bearing. Mean follow-up time was 107.0 months for the Transcend group, and 90.4 months for the Interseal group. There were no significant differences between the Transcend and Interseal groups for mode of failure and survivorship, which is notable considering the younger and more active Transcend group. However, the Transcend group showed significantly better clinical scores, which may have been a result of the selection methods. Neither surface was differentially implicated in osteolysis, aseptic loosening, or adverse local tissue reaction (ALTR). Our study shows a favorable and comparable performance for both systems. [ABSTRACT FROM AUTHOR]

A review of wear mechanisms has been carried out in this paper for the hip prostheses. The primary causes of premature failure in hip prostheses are due to wearing of the implants. Multiple variables interact and increase the resultant wear rates. A summary of clinical in vivo and bulk material wear rate data from published literature has been presented for polyethylene-on-metal, metal-on-metal, and ceramic implants. This article addresses the engineering aspects concerning the advantages and disadvantages of each type of articulation. Wear mechanisms are discussed as a function of contact stresses, lubricants and clearance, surface hardness and roughness, type of articulation due to motion, number of cycles, solution particle count and distribution, oxidation of materials, and surface abrasions of both metal and polyethylene particulates. These issues are reviewed in this review. [Copyright &y& Elsevier]

Background: The ideal bearing surface for patients of avascular necrosis (AVN) undergoing total hip arthroplasty (THA) remains controversial. The purpose of this study is to evaluate the clinical outcomes, health-related quality of life (HRQL), and wear of the bearing surface between ceramic-on-ceramic (CoC) and ceramic-on-highly cross-linked polyethylene (CoXPE) THA for patients of AVN after midterm follow-up. Methods: We performed a retrospective case-control analysis of 93 CoC and 77 CoXPE consecutive THAs for patients of AVN. The cases were followed at a minimum 5 years follow-up (average 7 years). Harris hip score (HHS) score and bearing-related complications were assessed. The health-related quality of life (HRQL) was assessed with the Short Form 36 (SF-36). Plain radiographs and computed tomography (CT) were used for radiographic evaluation. Results: Both the CoC group and CoXPE group showed statistically significant improvements in HHS scores with no difference between the two bearing surfaces. There was no significant difference as for SF-36 at the latest follow-up between two groups, except for significant higher scores in the dimensions of general health in the CoC group (75.7 vs 64.7, P = 0.032). No radiographic evidence of osteolysis and loosening was present at the final follow-up. The mean wear rate of the CoC was 0.0096 mm/year and the CoXPE was 0.047 mm/year after evaluation with reconstructed CT. Conclusions: CoC THAs acts as well as CoXPE THAs for patients with femoral head avascular necrosis after midterm follow-up. CoC bearing can significantly decrease the wearing rate than CoXPE bearing. [ABSTRACT FROM AUTHOR]

This article highlights some hot topics and controversies in total hip arthroplasty. It discusses the use of pharmacologic agents, mechanical compression devices, and aspirin for thromboembolic prophylaxis. It also reviews the use of long versus short stems, as well as ceramic-on-ceramic and ceramic-on-highly cross-linked polyethylene bearing surfaces. [ABSTRACT FROM PUBLISHER]