Search

In this paper, the shapes of the electrodes are modified based on a rectilinear ion trap to achieve unidirectional ejection of ions. The designed asymmetric rectilinear ion trap (ARIT) analyzer adds convex and concave circular structures with a height of 0.5 mm on the two X-electrodes, so that the electric field center of the ion trap is inclined to the concave side. The electric field lines of the convex side are compressed to the concave side. Both simulations and experimental results show that ions are more likely to emit from the slit on the concave side plate when performing ion resonance ejection. The mass spectrum signal intensity can reach more than twice that of the original rectilinear trap when using only one detector. Calculations of the electric field components in the trap show that the even-order higher field proportion in the ion trap has not been significantly affected. Combined with the experimental test results, the study further confirmed that the developed ARIT has no significant loss in mass resolution, tandem mass spectrometry capability, and quantitative analysis capability. The proposed asymmetric structure modification scheme can achieve single-side ejection without significantly affecting other performances of the analyzer, which provides a new idea for the structural optimization of the subsequent ion trap analyzers. [ABSTRACT FROM AUTHOR]

Rationale: Secular frequency scanning is a mass spectrometry (MS) analysis method in which the frequency of the auxiliary alternating current (AC) signal is scanned. It has low requirements for radio-frequency (RF) power, which is beneficial for the miniaturization of the mass spectrometer. In this study, the MS performance in the reverse secular frequency scanning (RSFS) mode is optimized for a rectilinear ion trap (RIT), and a method for rapid MS analysis using continuous secular frequency scanning (CSFS) is proposed. Methods: A RIT mass spectrometer with an auxiliary AC frequency scanning function was built. The resolution, tandem mass spectrometry (MS/MS) and quantitation capability in the RSFS mode were characterized and optimized. Operation in the CSFS mode was then performed by scanning the frequency of the auxiliary AC signal continuously and periodically while maintaining the RF signal and the front Z electrode in the ion injection state, so that the ion injection and cooling were performed at the same time as the mass analysis. Results: With this system, the RSFS mode achieved unit mass resolution at 332 Th, and the MS/MS analysis was completed without changing the RF amplitude at q = 0.4583 for reserpine. The limit of quantitation for imatinib was about 250 ng/mL with the determination coefficient R2 = 0.9981. In the CSFS mode, a single analysis cycle of less than 20 ms could be achieved, which is 14 times faster than the traditional sweep modes. In addition, 100% ion utilization can theoretically be achieved in the CSFS mode. Conclusions: The CSFS mode is different from the traditional phased sequential operation mode of an ion trap mass spectrometer. By periodic scanning of the auxiliary AC frequency while maintaining ion injection, it is possible to improve the analysis efficiency of the mass spectrometer, which has the prospect of useful application in the field of rapid MS monitoring. [ABSTRACT FROM AUTHOR]

The rectilinear ion trap (RIT) has gradually become one of the preferred mass analyzers for portable mass spectrometers because of its simple configuration. In order to enhance the performance, including sensitivity, quantitation capability, throughput, and resolution, a novel RIT mass spectrometer with dual pressure chambers was designed and characterized. The studied system constituted a quadrupole linear ion trap (QLIT) in the first chamber and a RIT in the second chamber. Two control modes are hereby proposed: Storage Quadrupole Linear Ion Trap-Rectilinear Ion Trap (SQLIT-RIT) mode, in which the QLIT was used at high pressure for ion storage and isolation, and the RIT was used for analysis; and Analysis Quadrupole Linear Ion Trap-Rectilinear Ion Trap (AQLIT-RIT) mode, in which the QLIT was used for ion storage and cooling. Subsequently, synchronous scanning and analysis were carried out by QLIT and RIT. In SQLIT-RIT mode, signal intensity was improved by a factor of 30, the limit of quantitation was reduced more than tenfold to 50 ng mL-1, and an optimal duty cycle of 96.4% was achieved. In AQLIT-RIT mode, the number of ions coexisting in the RIT was reduced, which weakened the space-charge effect and reduced the mass shift. Furthermore, the mass resolution was enhanced by a factor of 3. The results indicate that the novel control modes achieve satisfactory performance without adding any system complexity, which provides a viable pathway to guarantee good analytical performance in miniaturization of the mass spectrometer. [ABSTRACT FROM AUTHOR]

A fiber-capacitive drop analyzer is an instrument which monitors a growing droplet to produce a capacitive opto-tensiotrace (COT). Each COT is an integration of fiber light intensity signals and capacitance signals and can reflect the unique physicochemical property of a liquid. In this study, we propose a solution analytical and concentration quantitative method based on multivariate statistical methods. Eight characteristic values are extracted from each COT. A series of COT characteristic values of training solutions at different concentrations compose a data library of this kind of solution. A two-stage linear discriminant analysis is applied to analyze different solution libraries and establish discriminant functions. Test solutions can be discriminated by these functions. After determining the variety of test solutions, Spearman correlation test and principal components analysis are used to filter and reduce dimensions of eight characteristic values, producing a new representative parameter. A cubic spline interpolation function is built between the parameters and concentrations, based on which we can calculate the concentration of the test solution. Methanol, ethanol, n-propanol, and saline solutions are taken as experimental subjects in this paper. For each solution, nine or ten different concentrations are chosen to be the standard library, and the other two concentrations compose the test group. By using the methods mentioned above, all eight test solutions are correctly identified and the average relative error of quantitative analysis is 1.11%. The method proposed is feasible which enlarges the applicable scope of recognizing liquids based on the COT and improves the concentration quantitative precision, as well. [ABSTRACT FROM AUTHOR]