Search

Background: Relatives of patients with mental illnesses such as schizophrenia and depression experience significant levels of anxiety. Accurately predicting their anxiety levels is crucial for the development of effective anti-anxiety interventions aimed at mitigating associated adverse outcomes. Methods: In this cross-sectional study, 238 relatives of patients with mental illness were recruited, and their responses were collected using the generalised anxiety disorder-7 (GAD-7) and simplified coping style questionnaire (SCSQ) scales. One-way analysis of variance and t-test were used to assess the mean scores of GAD-7 and SCSQ among relatives with varying characteristics. Pearson's correlations were used to examine the correlation between anxiety levels and coping style. Multi-level regression analyses were used to identify the impact of the independent variables on anxiety. Results: Among all relatives of patients with mental illness who participated in this survey, 238 completed the questionnaire. Females exhibited a higher mean GAD-7 score (9.72 ± 0.25) compared to males. Among participants aged 18–25 years, the GAD-7 (8.12 ± 0.17) score was the highest. Additionally, relatives of patients experiencing their first episode or with a disease duration of < 1 year, as well as relatives of patients with schizophrenia and depression, displayed higher GAD-7 scores. Correlation analysis revealed a positive correlation between anxiety and SCSQ (negative coping styles) (r = 0.476, p < 0.01). Multi-level regression analyses demonstrated that demographic variables (R2 = 0.474, F = 21.402, p < 0.01) and SCSQ (R2 change = 0.638, F = 37.526, p < 0.01) were significantly and positively associated with anxiety among relatives of patients with mental illness. Conclusions: Most relatives of patients with mental illness experience varying levels of anxiety, which are influenced by their coping styles. [ABSTRACT FROM AUTHOR]

Germanium telluride (GeTe) with ultrafast ferroelectric transition, Rashba‐like electronic transport, and anomalous phonon anharmonicity are historically studied for potential memorizing and thermoelectric applications. Due to recent breakthroughs in spintronics, valleytronics, orbitronics, pre‐eminent GeTe thermoelectrics have re‐attracted enormous interest from both academia and industries, with increasing reports of significant figure‐of‐merit over 2.7 and the maximum efficiency of up to 17.0%. Here, the emerging trends in advancing GeTe thermoelectrics, starting from fundamentals of phase transformation, crystal structure, bonding mechanisms, and transport characteristics, with a highlight on the roles of Ge_4s2 lone pairs, are timely overviewed. Technical insights in synthesis, characterization, property measurement, and computation are then summarized. After that, several innovative strategies for increasing the figure‐of‐merit, including entropy engineering, nanostructuring, and hybridization, which will further benefit near‐room‐temperature and n‐type performance, are examined. Moreover, high‐density and high‐efficiency devices with broad working temperatures are discussed as a result of rational configurational and interfacial design. In the end, perspective remarks on the challenges and outlook envisaging for next‐generation GeTe thermoelectrics, which will play a prominent role in future energy and environmental landscapes, are provided. [ABSTRACT FROM AUTHOR]

Ionic thermoelectric materials have attracted increasing attention because of their high flexibility and high Seebeck coefficient. However, their insufficient thermoelectric performance and long‐standing processing limit their practical applications. To achieve exotic ionic thermoelectric materials, here, a graphene oxide (GO) modified acrylamide ionogel is designed with high thermoelectric performance and flexibility. Detailed structural characterizations confirm that the uniform dispersion of GO particles in the ionogel structure enables a power factor of 753.0 µW m−1 K−2 and a promising ZT value of 0.19. Additionally, the as‐prepared ionic thermoelectric thin film shows excellent flexibility, stretchability, and self‐adhesiveness. An integrated device, assembled by the as‐prepared ionogel films, can generate an optimal output power density of 1.32 mW cm−2 with a temperature difference of 20 K, indicating great potential for wearable electronics. This work provides insight for searching long‐term, high‐performance ionic thermoelectric materials. [ABSTRACT FROM AUTHOR]

Formamide (HCONH2) plays a pivotal role in the manufacture of a diverse array of chemicals, fertilizers, and pharmaceuticals. Photocatalysis holds great promise for green fabrication of carbon‐nitrogen (C−N) compounds owing to its environmental friendliness and mild redox capability. However, the selective formation of the C−N bond presents a significant challenge in the photocatalytic synthesis of C−N compounds. This work developed a photocatalytic radical coupling method for the formamide synthesis from co‐oxidation of ammonia (NH3) and methanol (CH3OH). An exceptional formamide yield rate of 5.47±0.03 mmol ⋅ gcat−1 ⋅ h−1 (911.87±5 mmol ⋅ gBi−1 ⋅ h−1) was achieved over atomically dispersed Bi sites (BiSAs) on TiO2. An accumulation of 45.68 mmol ⋅ gcat−1 (2.0 g ⋅ gcat−1) of formamide was achieved after long‐term illumination, representing the highest level of photocatalytic C−N compounds synthesis. The critical C−N coupling for formamide formation originated from the "σ–σ" interaction between electrophilic ⋅CH2OH with nucleophilic ⋅NH2 radical. The BiSAs sites facilitated the electron transfer between reactants and photocatalysts and enhanced the nucleophilic attack of ⋅NH2 radical on the ⋅CH2OH radical, thereby advancing the selective C−N bond formation. This work deepens the understanding of the C−N coupling mechanism and offers an intriguing photocatalytic approach for the efficient and sustainable production of C−N compounds. [ABSTRACT FROM AUTHOR]

Formamide (HCONH2) plays a pivotal role in the manufacture of a diverse array of chemicals, fertilizers, and pharmaceuticals. Photocatalysis holds great promise for green fabrication of carbon‐nitrogen (C−N) compounds owing to its environmental friendliness and mild redox capability. However, the selective formation of the C−N bond presents a significant challenge in the photocatalytic synthesis of C−N compounds. This work developed a photocatalytic radical coupling method for the formamide synthesis from co‐oxidation of ammonia (NH3) and methanol (CH3OH). An exceptional formamide yield rate of 5.47±0.03 mmol ⋅ gcat−1 ⋅ h−1 (911.87±5 mmol ⋅ gBi−1 ⋅ h−1) was achieved over atomically dispersed Bi sites (BiSAs) on TiO2. An accumulation of 45.68 mmol ⋅ gcat−1 (2.0 g ⋅ gcat−1) of formamide was achieved after long‐term illumination, representing the highest level of photocatalytic C−N compounds synthesis. The critical C−N coupling for formamide formation originated from the "σ–σ" interaction between electrophilic ⋅CH2OH with nucleophilic ⋅NH2 radical. The BiSAs sites facilitated the electron transfer between reactants and photocatalysts and enhanced the nucleophilic attack of ⋅NH2 radical on the ⋅CH2OH radical, thereby advancing the selective C−N bond formation. This work deepens the understanding of the C−N coupling mechanism and offers an intriguing photocatalytic approach for the efficient and sustainable production of C−N compounds. [ABSTRACT FROM AUTHOR]

With the increasing demand for energy and the climate challenges caused by the consumption of traditional fuels, there is an urgent need to accelerate the adoption of green and sustainable energy conversion and storage technologies. The integration of flexible thermoelectrics with other various energy conversion technologies plays a crucial role, enabling the conversion of multiple forms of energy such as temperature differentials, solar energy, mechanical force, and humidity into electricity. The development of these technologies lays the foundation for sustainable power solutions and promotes research progress in energy conversion. Given the complexity and rapid development of this field, this review provides a detailed overview of the progress of multifunctional integrated energy conversion and storage technologies based on thermoelectric conversion. The focus is on improving material performance, optimizing the design of integrated device structures, and achieving device flexibility to expand their application scenarios, particularly the integration and multi-functionalization of wearable energy conversion technologies. Additionally, we discuss the current development bottlenecks and future directions to facilitate the continuous advancement of this field. [ABSTRACT FROM AUTHOR]

The process of chemical exchange saturation transfer (CEST) is quantified by evaluating a Z-spectra, where CEST signal quantification and Z-spectra fitting have been widely used to distinguish the contributions from multiple origins. Based on the exchange-dependent relaxation rate in the rotating frame (Rex), this paper introduces an additional pathway to quantitative separation of CEST effect. The proposed Rex-line-fit method is solved by a multi-pool model and presents the advantage of only being dependent of the specific parameters (solute concentration, solute‐water exchange rate, solute transverse relaxation, and irradiation power). Herein we show that both solute‐water exchange rate and solute concentration monotonously vary with Rex for Amide, Guanidino, NOE and MT, which has the potential to assist in solving quantitative separation of CEST effect. Furthermore, we achieve Rex imaging of Amide, Guanidino, NOE and MT, which may provide direct insight into the dependency of measurable CEST effects on underlying parameters such as the exchange rate and solute concentration, as well as the solute transverse relaxation. [ABSTRACT FROM AUTHOR]

Nanoscale defects can induce the effective modulation of carrier concentration, mobility, and phonon scattering to secure high thermoelectric performance in semiconductors. However, it is still limited to effectively controlling nanoscale defects in thermoelectric materials. Here, argon plasma bombardment is employed to introduce a large number of point defects and dislocations in microcrystalline SnSe powders, synthesized by a solvothermal method. After sintering these powders into polycrystalline bulk materials, bulk SnSe shows the ZT increasing by up to 66.7% (from 0.36 to 0.6 at 773 K). Through detailed micro/nanostructure characterizations and first‐principles calculations, the underlying mechanism is elucidated for the evaluation of thermoelectric performance. This work provides a deep understanding of the mechanism of nanoscale defects in modulating thermoelectric performance and presents experimental evidence and experience for the design and synthesis of efficient thermoelectric materials, making significant contributions to future green energy technologies. [ABSTRACT FROM AUTHOR]

Hydrogels are renowned for their complex structures and unique physicochemical properties, establishing them as key materials in bioenergy harvesting applications. They are used in various applications, including triboelectric nanogenerators, piezoelectric, hydraulic, thermoelectric, and biofuel cells. Among these, hydrogels as key materials for thermoelectric applications represent a technology capable of continuously converting biological energy (thermal energy) into electrical energy. This technology shows great potential and commercial value in body monitoring, energy storage, and human‐machine interaction applications. Given its rapid development, a timely review focusing on the research progress of hydrogels and their composites in thermoelectric technology is presented. This review discusses various types of hydrogels used for thermoelectric power generation and refrigeration, their unique properties, strategies for enhancing their thermoelectric performance, and their applications in the field. Finally, the remaining challenges and feasible strategies are identified for improving the efficiency, stability, application range, and system‐level integration of next‐generation hydrogels for thermoelectric applications. [ABSTRACT FROM AUTHOR]

In recent years, electrical fires, which constitute the majority of fire incidents, have become a significant concern. This paper presents a quantitative evaluation of the research on electrical fires from 1993 to 2022, using literature measurement and visual analysis techniques. A total of 2915 publications were collected from the Web of Science database to review and analyze the research progress on electrical fires. In this investigation, the quantitative distribution of literature by year as well as the distributions of main source journals, countries and regions, institutions, and discipline categories were analyzed. Additionally, research hotspots were identified and the knowledge field was mapped using VOSviewer. The results indicated an exponential growth in the number of publications on electrical fires, with Ceramics International emerging as the most prolific journal, having published 79 papers and accounting for 2.5% of the total research. The most active countries in electrical fire research were found to be China, the United States, South Korea, India, Germany, France, and the United Kingdom, with Chinese publications having the most significant impact. The University of Science and Technology of China, Chinese Academy of Sciences, and Tsinghua University are the most productive institutions in the field of electrical fire research; their main research directions include electrical structure, electrical experiment simulation, insulating materials, battery fires, fire extinguishing technology, and detection methods. Further, we observed that the scope of research on electrical fires has expanded from the macro to micro level. Thematic analysis conducted in the last decade has revealed that battery fires and equipment materials have emerged as the primary focus of research in this field. These research findings offer a comprehensive overview of the evolution of research hotspots, which can assist researchers in quickly grasping the research frontiers as well as the overall situation. [ABSTRACT FROM AUTHOR]

The Neoarchean Qingyuan greenstone belt (QGB) is located at the northeastern margin of the North China Craton (NCC) and has experienced amphibolite- to granulite-facies metamorphism. The supracrustal rock assemblage is composed of biotite-hornblende (Bt-Hb) monzonitic gneiss, garnet-biotite-hornblende (Grt-Bt-Hb) monzonitic gneiss, Grt-Bt-Hb plagioclase gneiss, amphibolite and orthopyroxene-biotite-hornblende (Opx-Bt-Hb) plagioclase gneiss. This study involves thorough field and petrographic observations, whole-rock geochemistry and LA-ICP-MS zircon U‒Pb ages of these rocks to constrain the Neoarchean geodynamic setting of the QGB. Zircon U‒Pb dating indicates that these metavolcanic rocks formed during 2.57‒2.52 Ga and experienced subsequent regional metamorphism at 2.52‒2.47 Ga. Lithological and geochemical characteristics show that the QGB protoliths were tholeiitic to calc-alkaline basalts, andesites, dacites and rhyolites. The andesite-dacite-rhyolite assemblage exhibits high SiO2 and Mg# values, low Yb and Y contents, strongly fractionated chondrite-normalized REE patterns and depletion in Nb, Ta, Ti and P, resembling Phanerozoic adakites. These geochemical characteristics suggest an origin from the partial melting of a subducted slab interacting with mantle wedge material. The tholeiitic to calc-alkaline basalts exhibit slightly LREE-enriched chondrite-normalized REE patterns and negative Nb and Ti anomalies, like island arc basalts. These basalts might have originated by partial melting of a mantle source affected by metasomatism from subduction-derived fluids and melts. The lithological associations and geochemical characteristics imply that the Qingyuan greenstone belt developed in a continental margin arc setting. [ABSTRACT FROM AUTHOR]

Rhombohedral GeSe is a promising p‐type thermoelectric material, noted for its low toxicity, environmental friendliness, and greater affordability compared with tellurides. However, its thermoelectric performance still requires further enhancement for practical applications. In this work, a highly competitive peak figure of merit (ZT) of 1.24 at 623 K for p‐type polycrystalline Ge0.895Cu0.005Se0.9(AgBiTe2)0.1, along with a high average ZT of 0.74 between 323 K and 623 K is reported. Comprehensive micro/nanostructural characterization reveals that alloying with AgBiTe2 and doping with Cu successfully induce dense point defects, secondary Ag2Te phases, and various nanoprecipitates in the GeSe matrix. These abundant crystalline and lattice defects result in strong phonon scattering, leading to an ultra‐low lattice thermal conductivity of 0.35 W m−1 K−1 at 623 K. Moreover, Cu doping enhances carrier mobility, promoting decoupling between carriers and phonons. This allows for low thermal conductivity and high power factor coexistence to achieve a high ZT. Additionally, with a temperature difference of 325 K, the theoretical energy conversion efficiency reaches up to 8.5%, indicating great potential for medium‐temperature device applications. This work suggests that Cu doping is an effective strategy for achieving high thermoelectric performance in rhombohedral GeSe‐based materials. [ABSTRACT FROM AUTHOR]

Swin Transformer is an important work among all the attempts to reduce the computational complexity of Transformers while maintaining its excellent performance in computer vision. Window-based patch self-attention can use the local connectivity of the image features, and the shifted window-based patch self-attention enables the communication of information between different patches in the entire image scope. Through in-depth research on the effects of different sizes of shifted windows on the patch information communication efficiency, this article proposes a Dual-Scale Transformer with double-sized shifted window attention method. The proposed method surpasses CNN-based methods such as U-Net, AttenU-Net, ResU-Net, CE-Net by a considerable margin (Approximately 3% ∼ 6% increase), and outperforms the Transformer based models single-scale Swin Transformer(SwinT)(Approximately 1% increase), on the datasets of the Kvasir-SEG, ISIC2017, MICCAI EndoVisSub-Instrument and CadVesSet. The experimental results verify that the proposed dual scale shifted window attention benefits the communication of patch information and can enhance the segmentation results to state of the art. We also implement an ablation study on the effect of the shifted window size on the information flow efficiency and verify that the dual-scale shifted window attention is the optimized network design. Our study highlights the significant impact of network structure design on visual performance, providing valuable insights for the design of networks based on Transformer architectures. [ABSTRACT FROM AUTHOR]

Synthetic nitrogen fertilizers, such as urea, are instrumental in augmenting agricultural output and addressing the demands of a growing population. Nevertheless, conventional urea production heavily relies on energy‐intensive processes. In this study, an environmentally friendly photocatalytic method is proposed for directly and selectively synthesizing urea from nitrogen (N2) and methanol (CH3OH using a Pt cluster‐decorated TiO2 catalyst (Pt cluster/TiO2). Remarkably, the Pt cluster/TiO2 exhibits outstanding urea synthesis performance with a rate of 105.68 µmol g−1 h−1 and N‐selectivity of 97.29 ± 0.79%, representing the highest level of photocatalytic urea synthesis from N2. Further analysis with density functional theory (DFT) calculation reveals that the "σ–π*" donor–acceptor interaction occurred between Pt clusters and N2, efficiently reducing the N2 hydrogenation barrier. EPR experiments demonstrate that photogenerated electrons (e−) and hole (h+) are synchronously consumed through N2 reduction and CH3OH oxidation, thereby accelerating urea synthesis. The crucial step of C─N coupling is initiated by the reaction between *NH─NH and *CHO intermediate, facilitated by the low energy barrier on Pt cluster/TiO2. This work suggests an mild route of urea production and provides profound insights into the underlying chemistry of the C─N coupling reaction, which can guide the sustainable synthesis of essential indispensable chemicals. [ABSTRACT FROM AUTHOR]

This document is a correction notice for an article titled "Evaluation of the efficacy of trigger points combined with extracorporeal shock waves in the treatment of plantar fasciitis: heel temperature and plantar pressure." The authors made a mistake in using the incorrect symbol "T" instead of "t" in certain tables, and the corrected tables are provided in the document. The tables present data on NRS scores and heel temperatures in both the control and test groups. The corrected tables show significant differences in NRS scores and heel temperatures between the two groups. The document also includes a table summarizing the plantar pressure measurements in both groups. The study found that the treatment had a significant impact on plantar pressure in both groups, with the test group showing greater improvements compared to the control group. The results were statistically significant, with p-values indicating a high level of confidence in the findings. [Extracted from the article]

Learning to index is the key to solving the problem of approximate nearest neighbor search in massive high-dimensional data. However, existing learning to index techniques are limited to individual partitions and rely on the construction of neighborhood graph. As the dimensionality and scale of data grow, indexing struggles to accurately judge boundary data of partitions, leading to increased construction time complexity and challenges in scalability. To address the above problems, a learn to index method based on partitioned hierarchical graphs, PBO-HNSW is proposed. The method redistributes partition boundary data and constructs distributed graph index structures in parallel. It effectively addresses the challenges faced by the approximate nearest neighbor search problem. Experimental results show that PBO-HNSW method is able to achieve millisecond index construction on millions of massive high-dimensional data. When the recall is 0.93, the construction time of the PBO-HNSW method is only 36.4% of baseline methods. [ABSTRACT FROM AUTHOR]

Background: Immunoregulatory drugs regulate the ubiquitin-proteasome system, which is the main treatment for multiple myeloma (MM) at present. In this study, bioinformatics analysis was used to construct the risk model and evaluate the prognostic value of ubiquitination-related genes in MM. Methods and results: The data on ubiquitination-related genes and MM samples were downloaded from The Cancer Genome Atlas (TCGA) and Gene Expression Omnibus (GEO) databases. The consistent cluster analysis and ESTIMATE algorithm were used to create distinct clusters. The MM prognostic risk model was constructed through single-factor and multiple-factor analysis. The ROC curve was plotted to compare the survival difference between high- and low-risk groups. The nomogram was used to validate the predictive capability of the risk model. A total of 87 ubiquitination-related genes were obtained, with 47 genes showing high expression in the MM group. According to the consistent cluster analysis, 4 clusters were determined. The immune infiltration, survival, and prognosis differed significantly among the 4 clusters. The tumor purity was higher in clusters 1 and 3 than in clusters 2 and 4, while the immune score and stromal score were lower in clusters 1 and 3. The proportion of B cells memory, plasma cells, and T cells CD4 naïve was the lowest in cluster 4. The model genes KLHL24, HERC6, USP3, TNIP1, and CISH were highly expressed in the high-risk group. AICAr and BMS.754,807 exhibited higher drug sensitivity in the low-risk group, whereas Bleomycin showed higher drug sensitivity in the high-risk group. The nomogram of the risk model demonstrated good efficacy in predicting the survival of MM patients using TCGA and GEO datasets. Conclusions: The risk model constructed by ubiquitination-related genes can be effectively used to predict the prognosis of MM patients. KLHL24, HERC6, USP3, TNIP1, and CISH genes in MM warrant further investigation as therapeutic targets and to combat drug resistance. [ABSTRACT FROM AUTHOR]

A novel Ba 3 (ZnB 5 O 10)PO 4 (BZBPO) phosphate ceramic was synthesised using a conventional solid-state technology. The BZBPO ceramic sintered at 850 °C demonstrated exceptional microwave dielectric properties: ε r = 5.88 ± 0.08, Q×f = 52,896 ± 1200 GHz (f 0 = 16.5 GHz) and τ f = 0.34 ± 0.25 ppm/°C. Raman spectroscopy revealed that ε r and Q×f were negatively correlated with the Raman shift and full width at half maximum of the BZBPO ceramic, respectively. Meanwhile, Phillips–Vechten–Levine theory revealed that Q×f was highly correlated with the lattice energy (U b), and τ f was closely related to the bond energy (E b) and the thermal expansion coefficient. Among contribution ratios of individual chemical bonds, the B–O bond mainly contributed to U b , E b and ionicity, proving that the bond dominantly affected the dielectric properties of the BZBPO ceramic. Finally, the BZBPO ceramic was co-fired with silver, demonstrating its potential applicability towards low temperature co-fired ceramic technology. [ABSTRACT FROM AUTHOR]

The creation of hierarchical nanostructures can effectively strengthen phonon scattering to reduce lattice thermal conductivity for improving thermoelectric properties in inorganic solids. Here, we use Zn doping to induce a remarkable reduction in the lattice thermal conductivity in SnTe, approaching the theoretical minimum limit. Microstructure analysis reveals that ZnTe nanoprecipitates can embed within SnTe grains beyond the solubility limit of Zn in the Zn alloyed SnTe. These nanoprecipitates result in a substantial decrease of the lattice thermal conductivity in SnTe, leading to an ultralow lattice thermal conductivity of 0.50 W m−1 K−1 at 773 K and a peak ZT of ~0.48 at 773 K, marking an approximately 45 % enhancement compared to pristine SnTe. This study underscores the effectiveness of incorporating ZnTe nanoprecipitates in boosting the thermoelectric performance of SnTe‐based materials. [ABSTRACT FROM AUTHOR]

Single‐molecule toroics (SMTs), defined as a type of molecules with toroidal arrangement of magnetic moment associated with bi‐stable non‐magnetic ground states, are promising candidates for high‐density information storage and the development of molecule based multiferroic materials with linear magneto–electric coupling and multiferroic behavior. The design and synthesis of SMTs by arranging the magnetic anisotropy axis in a circular pattern at the molecular level have been of great interest to scientists for last two decades since the first detection of the SMT behavior in the seminal Dy3 molecules. DyIII ion has long been the ideal candidate for constructing SMTs due to its Kramer ion nature as well as high anisotropy. Nevertheless, other LnIII ions such as TbIII and HoIII ions, as well as some paramagnetic transition metal ions, have also been used to construct many nontraditional SMTs. Therefore, we review the progress in the studies of SMTs based on the nontraditional perspective, ranging from the 3D topological to 1D&2D&3D polymeric SMTs, and 3d–4f to non Dy‐based SMTs. We hope the understanding we provide about nontraditional SMTs will be helpful in designing novel SMTs. [ABSTRACT FROM AUTHOR]

Folded optical path designs have been widely applied in Virtual Reality (Pancake VR) displays in recent years. Compared with the traditional straight‐through and Fresnel optical path design, the Pancake design has obvious advantages in smaller size and clearer virtual image. However, the Pancake optical path uses polarization devices to fold the optical path and, light undergoes multiple refractions and reflections between lens groups, thus inevitably introducing stray light. This stray light greatly reduces the contrast ratio even if taking high‐contrasting Mini‐LED backlight LCD as panel, and seriously affects the user experience. In this paper, we first analyze the causes of stray light in the Pancake design and then propose an effective optical design method. In addition, an effective process scheme for improving image contrast is proposed by analyzing the impact of lens and tube reflectivity. Further, a prototype of the Pancake VR optical module is successfully implemented with low stray light and high contrast ratio. [ABSTRACT FROM AUTHOR]

Macrosegregation is a critical factor that limits the mechanical properties of materials. The impact of equiaxed crystal sedimentation on macrosegregation has been extensively studied, as it plays a significant role in determining the distribution of alloying elements and impurities within a material. To improve macrosegregation in steel connecting shafts, a multiphase solidification model that couples melt flow, heat transfer, microstructure evolution, and solute transport was established based on the volume-averaged Eulerian-Eulerian approach. In this model, the effects of liquid phase, equiaxed crystals, columnar dendrites, and columnar-to-equiaxed transition (CET) during solidification and evolution of microstructure can be considered simultaneously. The sedimentation of equiaxed crystals contributes to negative macrosegregation, where regions between columnar dendrites and equiaxed crystals undergo significant A-type positive macrosegregation due to the CET. Additionally, noticeable positive macrosegregation occurs in the area of final solidification in the ingot. The improvement in macrosegregation is beneficial for enhancing the mechanical properties of connecting shafts. To mitigate the thermal convection of molten steel resulting from excessive superheating, reducing the superheating during casting without employing external fields or altering the design of the ingot mold is indeed an effective approach to control macrosegregation. [ABSTRACT FROM AUTHOR]

AbstractHelicobacter pylori, a gram‐negative bacterium, is known to be associated with various gastric pathologies including chronic gastritis, peptic ulcers and gastric carcinoma. Despite the emerging issue of bacterial resistance to antibiotic-based combination therapy, there is currently no vaccine available for H. pylori infection in the market. Here, we report the synthesis of α-(1,3)-D,D-heptoglycan with different chain length from the lipopolysaccharide of H. pylori serogroup O6. The [n + 1] iterative glycosylation strategy was used for heptoglycan chain elongation. The trifluoroacetimidate heptoside donor exhibited much higher efficiency than thioglycoside donor during glycosylation. An antigenicity evaluation using glycan microarrays indicated that α-(1,3)-D,D-hepto-disaccharide, pentasaccharide and hexasaccharide showed stronger binding affinity to IgG antibodies of H. pylori O6 LPS immunized rabbit serum or serum of H. pylori infected patients. These findings provide significant structure − activity relationship information for developing carbohydrate-based vaccines against H. pylori containing α-(1,3)-D,D-heptoglycan. [ABSTRACT FROM AUTHOR]

Objective: To investigate the clinical significance of the creatine kinase (CK)-MB/total CK ratio, neutrophil/lymphocyte ratio (NLR) and red blood cell distribution width in acute myocardial infarction (AMI). Methods: A retrospective analysis was conducted of 196 AMI cases from our hospital's cardiology department; healthy people were selected over the same period as the control. The two groups' test indexes were compared through multivariate logistic regression analysis to screen for AMI risk factors; the receiver operating characteristic (ROC) curve was used to evaluate their AMI predictive values. Results: The serum CK, CK-MB, CK index, neutrophils and NLR values in the AMI group were significantly higher compared with those in the control group (p < 0.05); however, the levels of serum lymphocytes were significantly lower compared with those in the control group (p < 0.05). Multivariate logistic regression analysis showed that elevated CK-MB and NLR levels were risk factors for AMI (p < 0.05). The ROC curve showed that the area under the curve of the NLR and CK levels were 0.917 and 0.594, respectively. Conclusion: The CK index and NLR have a clinical predicting value for AMI and could be used as a clinical auxiliary diagnostic index for the assessment of patients with AMI. [ABSTRACT FROM AUTHOR]

To investigate the relationship between grain sizes, seepage capacity, and oil-displacement efficiency in the Liushagang Formation of the Beibuwan Basin, this study identifies the multistage pore-throat structure as a crucial factor through a comparison of oil displacement in microscopic pore-throat experiments. The two-phase flow evaluation method based on the LieHorne model is utilized to effectively characterize and quantify the seepage characteristics of different reservoirs, closely relating them to the distribution of microscopic pores and throats. It is observed that conglomerate sandstones at different stages exhibit significant heterogeneity and noticeable differences in seepage capacity, highlighting the crucial role played by certain large pore throats in determining seepage capacity and oil displacement efficiency. Furthermore, it was found that the displacement effects of conglomeratic sandstones with strong heterogeneity were inferior to those of conventional homogeneous sandstone, as evidenced by multiple displacement experiments conducted on core samples with varying granularities and flooding systems. Subsequently, core-based experiments on associated gas flooding after water flooding were conducted to address the challenge of achieving satisfactory results in a single displacement mode for reservoirs with significant heterogeneity. The results indicate that the oil recovery rates for associated gas flooding after water flooding increased by 7.3%e16.4% compared with water flooding alone at a gas eoil ratio of approximately 7000 m³/m³. Therefore, considering the advantages of gas flooding in terms of seepage capacity, oil exchange ratio, and the potential for two-phase production, gas flooding is recommended as an energy supplement mode for homogeneous reservoirs in the presence of sufficient gas source and appropriate tectonic angle. On the other hand, associated gas flooding after water flooding is suggested to achieve a more favorable development effect compared to a single mode of energy supplementation for strongly heterogeneous sandstone reservoirs. [ABSTRACT FROM AUTHOR]

Opting for NO as an N source in electrocatalytic NH3 synthesis presents an intriguing approach to tackle energy and environmental challenges. However, blindly pursuing high NH3 synthesis rates and Faradaic efficiency (FE) while ignoring the NO conversion ratio could result in environmental problems. Herein, Cu nanosheets with exposed (111) surface is fabricated and exhibit a NO‐to‐NH3 yield rate of 371.89 μmol cm−2 h−1 (flow cell) and the highest FE of 93.19±1.99 % (H‐type cell). The NO conversion ratio is increased to the current highest value of 63.74 % combined with the development of the flow cell. Additionally, Crystal Orbital Hamilton Population (COHP) clearly reveals that the "σ‐π* acceptance‐donation" is the essence of the interaction between the Cu and NO as also supported by operando attenuated total reflection infrared spectroscopy (ATR‐IRAS) in observing the key intermediate of NO−. This work not only achieves a milestone NO conversion ratio for electrocatalytic NO‐to‐NH3, but also proposes a new descriptor that utilizes orbital hybridization between molecules and metal centers to accurately identify the real active sites of catalysts. [ABSTRACT FROM AUTHOR]

Opting for NO as an N source in electrocatalytic NH3 synthesis presents an intriguing approach to tackle energy and environmental challenges. However, blindly pursuing high NH3 synthesis rates and Faradaic efficiency (FE) while ignoring the NO conversion ratio could result in environmental problems. Herein, Cu nanosheets with exposed (111) surface is fabricated and exhibit a NO‐to‐NH3 yield rate of 371.89 μmol cm−2 h−1 (flow cell) and the highest FE of 93.19±1.99 % (H‐type cell). The NO conversion ratio is increased to the current highest value of 63.74 % combined with the development of the flow cell. Additionally, Crystal Orbital Hamilton Population (COHP) clearly reveals that the "σ‐π* acceptance‐donation" is the essence of the interaction between the Cu and NO as also supported by operando attenuated total reflection infrared spectroscopy (ATR‐IRAS) in observing the key intermediate of NO−. This work not only achieves a milestone NO conversion ratio for electrocatalytic NO‐to‐NH3, but also proposes a new descriptor that utilizes orbital hybridization between molecules and metal centers to accurately identify the real active sites of catalysts. [ABSTRACT FROM AUTHOR]

Background: Plantar fasciitis (PF) is the most common cause of heel pain. Among conservative treatments, extracorporeal shock wave therapy (ESWT) is considered effective for refractory PF. Studies have shown that applying ESWT to the trigger points (TrPs) in the triceps surae may play an important role in pain treatment in patients with PF. Therefore, the purpose of this study was to combine the concept of trigger points and ESWT to explore the effect of this combination on plantar temperature and pressure in patients with PF. Methods: After applying inclusion and exclusion criteria, 86 patients with PF were recruited from the pain clinic of Huadong Hospital, Fudan University and randomly divided into experimental (n = 43) and control groups (n = 43). The experimental group was treated with extracorporeal shock waves to treat the medial heel pain point and the gastrocnemius and soleus TrPs. The control group was only treated with extracorporeal shock waves at the medial heel pain point. The two groups were treated twice with an interval of 1 week. Primary measurements included a numerical rating scale (NRS) score (overall, first step, heel pain during daily activities), and secondary measurements included heel temperature, Roles–Maudsley score (RMS), and plantar pressure. All assessments were performed before treatment (i.e., baseline) and 6 and 12 weeks after treatment. Results: During the trial, 3 patients in the experimental group withdrew from the study, 2 due to interruption of the course of treatment by the COVID-19 epidemic and 1 due to personal reasons. In the control group, 3 patients fell and were removed due to swelling of the heel. Therefore, only 80 patients with PF were finally included. After treatment, the two groups showed good results in NRS score (overall, first step, heel pain during daily activities), RMS, and plantar temperature, especially in the experimental group, who showed a significantly better effect than the control group. Conclusion: ESWT of the heel combined with the triceps trigger point of the calf can more effectively improve the pain, function and quality of life of refractory PF than ESWT of the heel alone. In addition, ESWT of the heel combined with the triceps trigger point of the calf can effectively reduce the skin temperature of the heel on the symptomatic side, indicating that the heel temperature as measured by infrared thermal imaging may be used as an independent tool to evaluate the therapeutic effect for patients with chronic PF. Although extracorporeal shock waves combined with TrPs treatment can cause changes in the patients' gait structure, plantar pressure is still difficult to use as an independent tool to evaluate the therapeutic effect for PF. Trial registration: Registered in the Chinese Clinical Trial Registry (www.chictr.org.cn) on 12/17/2021 with the following code: ChiCTR-INR-2,100,054,439. [ABSTRACT FROM AUTHOR]

The continuously increasing demands of food, feed and various corn-derived products accelerate the concern about the corn production on environment. Nevertheless, few researches simultaneously address the issue from different perspectives of carbon, water and energy as well as their temporal variations. Herein, a systematic cradle-to-gate life cycle assessment of maize production was conducted with a case study in Shandong, China. Different midpoint and endpoint indices including 10-year average data from 2011 to 2020 and their temporal variations were investigated. The contribution analysis of different processes to these indices revealed that irrigation dominated the midpoint of water scarcity, whereas the sum of direct consumption, fertilizer and diesel production contributed more than 80% to all the other indices. The sensitivity analysis also illustrated that these environmental indices can be reduced by as high as 4% when the aforementioned inputs were individually decreased by 5%. The temporal variation of the global warming potential, aquatic eutrophication and fossil depletion demonstrated that all the three indices were decreased by about 25.0%–31.7% over the last decade. Further persistent efforts to enhance mechanized operation efficiency and explore green and efficient methods for fertilizer and diesel production were highlighted. Moreover, implementations of rational agricultural management such as scientific fertilization and water-efficient irrigation were suggested, in order to have an eco-friendly maize production system. [ABSTRACT FROM AUTHOR]

To explore the mediating effects of perceived social support between frailty and self-perceived burden (SPB) in elderly patients with diabetes and to provide a theoretical basis for reducing that burden. Methods: A total of 169 elderly patients with diabetes who were hospitalised in the endocrinology department of a third-class hospital in Wuxi between May 2020 and July 2022 were included in this study using the convenience sampling method. Patients were assessed by the general information questionnaire, the Chinese version of the Tilburg frailty inventory (TFI), the Self-Perceived Burden Scale (SPBS) and the Perceived Social Support Scale (PSSS). The SPSS 22.0 software was used for Pearson's correlation analysis and multiple linear regression analysis. Model four of the SPSS PROCESS was used for mediating the effect analysis. Results: The SPBS of elderly patients with diabetes was positively correlated with the TFI (P < 0.01) and negatively correlated with the PSSS (P < 0.01). The results of the Bootstrap test showed that the mediating effect of the PSSS on the relationship between the TFI and the SPBS in elderly patients with diabetes was 0.296 (95% CI: 0.007, 0.066), and the mesomeric effect accounted for 17.3% of the total effect. Conclusion: The debilitation of elderly patients with diabetes can be reduced by decreasing their SPB through perceived social support. This can be achieved through comprehensive interventions by nurses. [ABSTRACT FROM AUTHOR]

One new seco-cyclic phorbol derivative and one new phorbol 12-monoester, named 13-oxo-14-isopropylphorbol (2), 12-angelylphorbol (5), together with four known compounds, named 4a-deoxyphorbol, 13-oxo-14-isopropenylphorbol, 12-isobutyrylphorbol, and phorbol-12-(2-methylbutyrate) were obtained by hydrolyzing croton oil. The structures of the compounds were elucidated by spectroscopic analysis. These compounds showed no cytotoxicity (CC50 > 200 μM). Phorbol-12-monoesters 4–6 showed the weak inhibitory activities on syncytia formation induced by HIV-1IIIB (4, EC50 = 56.05 μM; 5, EC50 = 72.97 μM; 6, EC50 = 52.58 μM). The seco-cyclic phorbol derivatives (2, 3) showed no anti-HIV-1 activities (EC50 > 200 μM), which indicated that chemical cleavage of cyclopropanols might affect anti-HIV-1 activity. [ABSTRACT FROM AUTHOR]

Dynamic multispectral imaging finds extensive applications in acquiring multidimensional information. The integration of high-performance, dynamic, and long-wavelength multispectral detectors at the pixel level is highly desirable across various applications. However, the development of such detector faces enormous challenges due to the fundamental material and optical system limitations. In this work, we present a pixel-integrated long-wavelength multispectral type II superlattice detector based Mie dielectric metasurface (Mie-multispectral detector) realized by integrating a graphene-assisted depletion Mie metasurface structure (GAMS). The GAMS is featured with a single-layer graphene and electrically gated tuned Mie dielectric grating. This pixel-integrated multispectral detector allows for 340 nm electrical dynamic tuning and D* value of 5 × 1010 Jones. The Mie-multispectral detector offers potential solutions in space exploration, pollutant retrieval, and other relevant fields. [ABSTRACT FROM AUTHOR]

Gallic acid is a renewable plant phenolic resource, and the polyphenolic bio‐based epoxy resin prepared from it can be used as a substitute for bisphenol A epoxy resin in certain fields. However, bio‐based epoxy resins used in the field of high‐performance composite material matrices often require modification. In this paper, firstly, γ‐(2,3‐epoxypropoxy)propyl trimethoxysilane (KH560) was used as the raw material to prepare epoxy‐based cage silsesquioxanes (E‐POSS). Then, E‐POSS was grafted onto γ‐aminopropyltriethoxysilane (KH550) modified halloysite nanotubes (m‐HNTs) to prepare a novel hybrid nanoparticle HNTs‐e‐POSS. Experimental analysis shows that ring opening reactions of amino and epoxy groups can occur between m‐HNTs and E‐POSS, forming a hybrid nanoparticle system of POSS aggregates on the surface of HNTs. Bio‐based nanocomposites were prepared by adding different mass fractions of hybrid nanoparticles HNTs‐e‐POSS into polyphenol type gallic acid epoxy resin matrix (GAER) and using methyltetrahydrophthalic anhydride as curing agent. The properties and micromorphology of the composite were analyzed and characterized. The research showed that with the addition of HNTs‐e‐POSS nanoparticles, the strength and toughness of the composite resin system show a pattern of first increasing and then decreasing, while the storage modulus(E′), glass transition temperature (Tg), and thermal stability of the composite material increased. Mechanical performance analysis shows that the introduction of 0.5 wt% HNTs‐e‐POSS would increase the tensile strength of the composite by 25.46%, while adding 0.75 wt% HNTs‐e‐POSS can increase the impact strength by 15%. The E′(30°C) increased by 24.2% and Tg increased by 7.7°C when the HNTs‐e‐POSS addition was 0.25 wt%. Highlights: Prepared hybrid nanoparticle HNTs‐e‐POSS by grafting POSS onto the HNTs surface.Application of HNTs‐e‐POSS in modification of bio‐based gallic acid epoxy resin.HNTs‐e‐POSS can co‐cured with epoxy matrix to increase the crosslinking degree.The strength, toughness, and modulus of gallic acid epoxy resin are improved.Tg and thermal stability of gallic acid epoxy resin are enhanced. [ABSTRACT FROM AUTHOR]

Computer vision (CV)-based recognition approaches have accelerated the automation of safety and progress monitoring on construction sites. However, limited studies have explored its application in process-based quality control of construction works, especially for concealed work. In this study, a framework is developed to facilitate process-based quality control utilizing Spatial–Temporal Graph Convolutional Networks (ST-GCNs). To test this model experimentally, we used an on-site collected plastering work video dataset to recognize construction activities. An ST-GCN model was constructed to identify the four primary activities in plastering works, which attained 99.48% accuracy on the validation set. Then, the ST-GCN model was employed to recognize the activities of three extra videos, which represented a process with four activities in the correct order, a process without the activity of fiberglass mesh covering, and a process with four activities but in the wrong order, respectively. The results indicated that activity order could be clearly withdrawn from the activity recognition result of the model. Hence, it was convenient to judge whether key activities were missing or in the wrong order. This study has identified a promising framework that has the potential to the development of active, real-time, process-based quality control at construction sites. [ABSTRACT FROM AUTHOR]

Arsenolipids are organoarsenicals with a long aliphatic chain that have been identified in a wide array of marine organisms. Precise analysis of arsenolipids is crucial for evaluating their toxicity, ensuring food safety, monitoring the environment, and gaining insights into the evolution of arsenic biogeochemistry. However, the discovery of new arsenolipids is often impeded by existing analytical challenges, notably the need for multiple instruments, such as the combination of liquid chromatography electrospray ionization mass spectrometry (LC-ESI-MS) and inductively coupled plasma mass spectrometry (LC-ICP-MS). This study introduces a high-throughput untargeted analytical method on the basis of an unsophisticated instrumental configuration, LC-ESI-MS with collision-induced dissociation (CID) at 200 eV. This approach provides efficient dissociation of arsenic atoms from their precursor lipids and direct detection of the organic-bound arsenic as monatomic cations, As+. Application of this method has shown promise in rapidly characterizing arsenolipids in diverse samples, which has led to the discovery of a wide range of novel arsenolipids, including seven previously unidentified thioxoarsenolipids in ancient marine sediments. [ABSTRACT FROM AUTHOR]

Different Ca-based layered double oxides (LDO) were applied in the removal of contaminants in used lubricating oil as an alternative decolorant. CaAl-LDO and CaFeAl-LDO achieved much greater decoloration efficiency than the traditional decolorants, where 0.93 and 0.91 of the decoloration efficiency under the optimum conditions were obtained, respectively. The decoloration activity with CaFeAl-LDO ​> ​CaAl-LDO ​>> ​CaFe-LDO was revealed by both Density Functional Theory (DFT) calculations and experimental analysis. Ca 12 Al 14 O 33 was shown to be the active component for decoloration. Fe3+ doped into CaAl-LDO could improve decoloration activity via a changed charge distribution of decolorant. High preferential adsorption activity, which originated from different charge distribution for contaminants instead of the oil components, contributed to outstanding decoloration performance. The activity depended on the adsorption intensity of contaminants, where the most of the active decolorant neither too strongly or weakly bound with the contaminants. The results of this study suggested the Ca based LDOs could be a potentially alternative decolorants for regenerating the used lubricating oil. • CaFeAl-LDO was prepared as a decolorant for used lubricating oil decoloration • CaAl-LDO and CaFeAl-LDO achieved much greater decoloration efficiency than the traditional decolorants • Ca 12 Al 14 O 33 was the active component for regeneration of used lubricating oil • DFT suggested that Fe3+ doped into CaFeAl-LDO improved decolorization activity [ABSTRACT FROM AUTHOR]

Crowdsourced testing for mobile applications is widespread. Efficiently and swiftly inspecting enormous test reports is a crucial challenge in crowdsourced testing. Most existing methods focus on finding different bugs earlier, i.e. the diversity of bugs, while ignoring bug severity. We present a multi-objective prioritization method for crowdsourced test reports that takes into account the diversity and severity of bugs. In the beginning, we ranked the test reports according to severity, then clustered the test reports by fusing textual and image features, and finally used the clustering results to adjust the initial ranking to ensure diversity. To validate our method, we conducted experiments using an industrial crowdsourced test report dataset comprised of six mobile application projects. The results demonstrate that our method can find more different high-severity bugs earlier than existing methods. [ABSTRACT FROM AUTHOR]

In this work, two novel CaASbWO 8 (A = Gd, La; named CGSWO and CLSWO) microwave dielectric ceramics were synthesized by a classical solid-state method. Remarkably, the outstanding microwave dielectric properties (ε r = 12.97, Q×f = 45,034 GHz, and τ f = −16.29 ppm/°C) were achieved for CGSWO ceramics sintered at 1440 °C, and CLSWO ceramics sintered at 1300 °C possessed the excellent microwave dielectric properties of ε r = 9.89, Q×f = 61,326 GHz, and τ f = 0.55 ppm/°C. Bond valence, ionic polarizability, Raman spectroscopy and Phillips–Vechten–Levine (P-V-L) theory were used to study the internal lattice vibration and chemical bonds in detail, and the dielectric properties were explored from the internal factors. In comparison to the ε r , the ε theo of CGSWO was found to be consistently underestimated, whereas CLSWO exhibited a contrasting pattern. This discrepancy was primarily attributed to the rattling and compressed effects of A-site cation. According to the analysis of P-V-L theory, W-O bond played an important role in regulating the Q×f value. Moreover, the τ f values of CGSWO and CLSWO ceramics were opposite, which provided an opportunity to manufacture microwave ceramic devices with good temperature stability. [ABSTRACT FROM AUTHOR]

Increasing numbers of studies have shown that tumor cells prefer fermentative glycolysis over oxidative phosphorylation to provide a vast amount of energy for fast proliferation even under oxygen‐sufficient conditions. This metabolic alteration not only favors tumor cell progression and metastasis but also increases lactate accumulation in solid tumors. In addition to serving as a byproduct of glycolytic tumor cells, lactate also plays a central role in the construction of acidic and immunosuppressive tumor microenvironment, resulting in therapeutic tolerance. Recently, targeted drug delivery and inherent therapeutic properties of nanomaterials have attracted great attention, and research on modulating lactate metabolism based on nanomaterials to enhance antitumor therapy has exploded. In this review, the advanced tumor therapy strategies based on nanomaterials that interfere with lactate metabolism are discussed, including inhibiting lactate anabolism, promoting lactate catabolism, and disrupting the "lactate shuttle". Furthermore, recent advances in combining lactate metabolism modulation with other therapies, including chemotherapy, immunotherapy, photothermal therapy, and reactive oxygen species‐related therapies, etc., which have achieved cooperatively enhanced therapeutic outcomes, are summarized. Finally, foreseeable challenges and prospective developments are also reviewed for the future development of this field. [ABSTRACT FROM AUTHOR]

Developing high-efficiency and environmentally friendly cooling technology is crucial for sustainable life. Heat-driven thermoacoustic refrigerator (HDTR) is an emerging cooling technology characterized by no moving components, eco-friendly working substances, and high reliability. This study reports an innovative efficient HDTR with bypass configuration, which employs eco-friendly and economical working substances, the nitrogen and water. The bypass configuration enables good matching of acoustic power between the engine and cooler units at high heating temperatures, thus enhancing the efficiency. In addition, the employment of liquid resonator significantly reduces the working frequency and reduces the loss. An experimental investigation is performed on the onset characteristics and operating performance of the proposed system. The results show that a highest coefficient of performance (COP) of 0.49 and a cooling power of 726 W are achieved at the heating, ambient, and cooling temperatures of 500, 35, and 7 °C, respectively, exhibiting a high level for the HDTRs employing nitrogen. This work supplies an effective way to the efficiency enhancement of the HDTRs, indicating substantial potential of the proposed HDTR in eco-friendly air-conditioning applications. [ABSTRACT FROM AUTHOR]

Collating vast test reports is a time-consuming and laborious task in crowdsourced testing. Crowdsourced test reports are usually presented in two ways, one as text and the other as images, which have symmetrical content. Researchers have proposed many text- and image-based methods for prioritizing crowdsourced test reports of mobile applications. However, crowdsourced test reports of web applications typically have clearer textual descriptions of errors but noisier screenshots of errors. This gap motivates us to propose a method for prioritizing crowdsourced test reports of web applications to detect all errors earlier. In this paper, we integrate text and image information from test reports to enhance the analysis process. First, we use the natural language processing (NLP) technique to extract textual features of error descriptions and then symmetrically extract image features of error screenshots, i.e., we use the optical character recognition (OCR) technique to obtain textual information in the screenshots and then also use the NLP technique to extract features. To validate our approach, we conduct experiments on 717 test reports. The experimental results show that our method has a higher APFD (average percentage fault detection) and shorter runtime than state-of-the-art prioritization methods. [ABSTRACT FROM AUTHOR]

Experimental methods, including mercury pressure, nuclear magnetic resonance (NMR) and core (wateroil) displacement, are used to examine the effects of high-multiple water injection (i.e. water injection with high injected pore volume) on rock properties, pore structure and oil displacement efficiency of an oilfield in the western South China Sea. The results show an increase in the permeability of rocks along with particle migration, an increase in the pore volume and the average pore throat radius, and enhanced heterogeneity after high-multiple water injection. Compared with normal water injection methods, a high-multiple water injection is more effective in improving the oil displacement efficiency. The degree of recovery increases faster in the early stage due to the expansion of the swept area, and the transition from oil-wet to water-wet. The degree of recovery increases less in the late stage due to various factors, including the enhancement of heterogeneity in the rocks. Considering both the economic aspect and the production limit of water flooding, it is recommended to adopt other technologies to further enhance oil recovery after 300 PV water injection. [ABSTRACT FROM AUTHOR]

TiSnNbTaGa 2 O 12 (TSNTGO) high–entropy dielectric ceramic was successful synthesized using the solid-state reaction method. X–ray diffraction (XRD), Rietveld refinement and transmission electron microscopy (TEM) were used to verify that all samples have rutile structure of P42–mnm space group. The analysis of Raman spectra proved that the ε r exhibited a contrary changing trend as that of Raman shift near 822 cm−1, and the same similar relationship occurred between Q×f values and full width at half maximum (FWHM). The exploration of complex chemical bonding theory (P–V–L theory) for TSNTGO ceramics suggested that the bond ionicity played a dominant role in ε r , while Q×f and τ f were primarily determined by lattice energy and bond energy, respectively. Notably, the TSNTGO ceramics sintered at 1275 ℃ demonstrated optimal microwave dielectric properties of ε r = 33.62 ± 0.03, Q×f = 51,832 ± 1000 GHz (f 0 = 6.4 GHz), and τ f = –0.38 ± 0.16 ppm/℃. [ABSTRACT FROM AUTHOR]

Gastric cancer (GC) causes millions of cancer-related deaths due to anti-apoptosis and rapid proliferation. However, the molecular mechanisms underlying GC cell proliferation and anti-apoptosis remain unclear. The expression levels of DHRS4-AS1 in GC were analyzed based on GEO database and recruited GC patients in our institution. We found that DHRS4-AS1 was significantly downregulated in GC. The expression of DHRS4-AS1 in GC tissues showed a significant correlation with tumor size, advanced pathological stage, and vascular invasion. Moreover, DHRS4-AS1 levels in GC tissues were significantly associated with prognosis. DHRS4-AS1 markedly inhibited GC cell proliferation and promotes apoptosis in vitro and in vivo assays. Mechanically, We found that DHRS4-AS1 bound to pro-oncogenic DHX9 (DExH-box helicase 9) and recruit the E3 ligase MDM2 that contributed to DHX9 degradation. We also confirmed that DHRS4-AS1 inhibited DHX9-mediated cell proliferation and promotes apoptosis. Furthermore, we found DHX9 interact with ILF3 (Interleukin enhancer Binding Factor 3) and activate NF-kB Signaling in a ILF3-dependent Manner. Moreover, DHRS4-AS1 can also inhibit the association between DHX9 and ILF3 thereby interfered the activation of the signaling pathway. Our results reveal new insights into mechanisms underlying GC progression and indicate that LncRNA DHRS4-AS1 could be a future therapeutic target and a biomarker for GC diagnosis. [ABSTRACT FROM AUTHOR]

Objectives: Scutellarin, which is obtained from Erigeron breviscapus Hand-Mazz (EBHM), is a flavonoid that has demonstrated the ability to safeguard neural stem cells from hypoxia-induced damage and prevent cell apoptosis. The aim of this study was to investigate the beneficial impacts of Scutellarin on mitophagy in both in vivo and in vitro models of myocardial ischemia-reperfusion (I/R) injury. Materials and Methods: Prior to inducing models of myocardial I/R injury, mice were administered either Scutellarin (50 mg/kg/day) or a vehicle for seven consecutive days. The mice underwent I/R injury (30 min of left anterior descending (LAD) coronary artery ligation followed by 120 min of reperfusion). Myocardial injury markers were assessed by the enzyme-linked immunosorbent assay (ELISA). The size of the myocardial infarction was measured via 2,3,5-triphenyl tetrazolium chloride triazole staining, and the protein expression of LC3 and caspase-3 was determined through Western blot analysis. In vitro experiments were conducted utilizing cultured H9C2 cells subjected to an oxygen-glucose deprivation/reoxygenation model to investigate the underlying mechanism(s) of Scutellarin's positive effects (50 µM). Results: It shows that Scutellarin treatment reduced the size of the myocardial infarctions and decreased the levels of myocardial injury markers. Western blot analysis showed that protein expression of caspase-3 was decreasing and the ratio of LC3Ⅱ to LC3Ⅰ was increasing in the Scutellarin group. In vitro , Scutellarin decreased oxidative stress markers, stabilized mitochondrial membrane potential (∇Ψm), decreased mitochondrial permeability transition pore (mPTP) opening rate, promoted mitochondrial fusion, inhibited mitochondrial fission, and increased adenosine triphosphate (ATP) production and cell viability. Scutellarin increased the commitment of mitophagy by regulating Pink and Parkin, while apoptosis decreased. cAMP-response element-binding protein (CREB) and extracellular signal-regulated kinases 1 and 2 (ERK1/2) phosphorylation were also modulated by Scutellarin. Conclusion: The myocardial protective effect of Scutellarin may be associated with the phosphorylation of CREB and ERK1/2. [ABSTRACT FROM AUTHOR]

Faltings heights over function fields of complex projective curves are modular invariants of families of curves. The question on minimized Faltings heights was raised by Mazur. In this note, we consider this question for a simple class of families of hyperelliptic curves. We obtain a complete result of this question in this case. [ABSTRACT FROM AUTHOR]

Inorganic semiconductor Ag2S with excellent plasticity is highly desired in flexible and wearable thermoelectrics. However, the compromise between plasticity and thermoelectric performance limits the advances in Ag2S‐based thermoelectric materials and their devices. Here, a 0.5 mol.% Ag2Te‐alloyed Ag2S0.5Se0.5 bulk material is designed, which has a competitively high near‐room‐temperature figure of merit of ≈0.43 at 323 K and an ultra‐high bending strain of ≈32.5% without cracks. Introducing Ag2Te can optimize the carrier concentration and mobility of the Ag2S0.5Se0.5 matrix due to its metal‐like conducting features, leading to a maximum power factor of ≈6 µW cm−1 K−2. Simultaneously, Ag2Te induces Ag‐poor amorphous phase boundaries, serving as buffer layers to enhance the overall plasticity. Moreover, such amorphous phase boundaries combined with multiscale phonon scattering sources can significantly suppress the lattice thermal conductivity to ≈0.28 W m−1 K−1 at 323 K, leading to a high figure of merit. This study demonstrates an innovative route to simultaneously boost the thermoelectric performance and plasticity of ductile semiconductors. [ABSTRACT FROM AUTHOR]

Greedy pursuit algorithms are widely used in sparse signal processing for their computational efficiency. However, research on the reconstruction error properties is far from comprehensive. This paper derives the statistical properties of reconstruction error in greedy pursuit algorithms, including probability density function (PDF), expectation, and covariance. The reconstruction error follows a mixture distribution, which is composed of multiple multivariate random variables and weighted by the probability of support sets. The multivariate random variable obeys a truncated distribution that results from restricting the noise domain. The validity of the derivations is verified by using the orthogonal matching pursuit (OMP) algorithm as an example. [ABSTRACT FROM AUTHOR]

As a most promising mid‐temperature thermoelectric material, CoSb3‐based bulk material exhibits an applicable figure‐of‐merit (ZT) of more than one. However, their fabrication is historically time‐consuming due to the long‐time solid‐state phase transitions from CoSb2 to CoSb3. To overcome this challenge, here, a fast one‐step process is developed to fabricate n‐type Yb‐doped CoSb3 with stable ZT of 1.12 at 765 K in <5 h. Experiments confirm Yb promotes peritectic reactions of CoSb + Liquid → CoSb2 and CoSb2 + Liquid → CoSb3, optimizes power factor, and suppresses thermal conductivity. Moreover, the dense grains, induced by the one‐step crystallization, result in outstanding mechanical properties with a Young's modulus of 171.4 GPa and a hardness of 8.8 GPa in the Yb‐doped CoSb3. This study indicates that the fast one‐step fabrication route can effectively promote the practical applications of CoSb3‐based thermoelectrics and provide guidance for thermoelectric fabrication via rational phase design. [ABSTRACT FROM AUTHOR]