Search

We investigate the lock-in zone (LIZ) of the East Greenland Ice Core Project (EastGRIP) region, northeastern Greenland, in detail. We present results from the firn air-pumping campaign of the S6 borehole, forward modeling, and a novel technique for finding the lock-in depth (LID, the top of the LIZ) based on the visual stratigraphy of the EastGRIP ice core. The findings in this work help to deepen our knowledge of how atmospheric gases are trapped in ice cores. CO2 , δ15N , and CH4 data suggest that the LID lies around 58 to 61 m depth. With the pixel value intensity and bright-spot analysis based on visual stratigraphy, we can pinpoint a change in ice properties to exactly 58.3 m depth, which we define as the optical lock-in depth (OLID). This visual change in ice properties is caused by the formation of rounded and enclosed air bubbles that alter the measured refraction of the light pathways. The results for the LID and OLID agree accurately on the depth. We furthermore use the visual stratigraphy images to obtain information on the sharpness of the open- to closed-porosity transition. Combining traditional methods with the independent optical method presented here, we can now better constrain the bubble closure processes in polar firn. [ABSTRACT FROM AUTHOR]

Impurities in polar ice play a critical role in ice flow, deformation, and the integrity of the ice core record. Especially cloudy bands, visible layers with high impurity concentrations, are prominent features in ice from glacial periods. Their physical and chemical properties are poorly understood, highlighting the need to analyse them in more detail. We bridge the gap between decimetre and micrometre scales by combining the visual stratigraphy line scanner, fabric analyser, microstructure mapping, Raman spectroscopy, and laser ablation inductively coupled plasma mass spectrometry 2D impurity imaging. We classified approximately 1300 cloudy bands from glacial ice from the East Greenland Ice-core Project (EGRIP) ice core into seven different types. We determine the localisation and mineralogy of more than 1000 micro-inclusions at 13 depths. The majority of the minerals found are related to terrestrial dust, such as quartz, feldspar, mica, and hematite. We further found carbonaceous particles, dolomite, and gypsum in high abundance. Rutile, anatase, epidote, titanite, and grossular are infrequently observed. The 2D impurity imaging at 20 µ m resolution revealed that cloudy bands are clearly distinguishable in the chemical data. Na, Mg, and Sr are mainly present at grain boundaries, whereas dust-related analytes, such as Al, Fe, and Ti, are located in the grain interior, forming clusters of insoluble impurities. We present novel vast micrometre-resolution insights into cloudy bands and describe the differences within and outside these bands. Combining the visual and chemical data results in new insights into the formation of different cloudy band types and could be the starting point for future in-depth studies on impurity signal integrity and internal deformation in deep polar ice cores. [ABSTRACT FROM AUTHOR]

Ever since the first deep ice cores were drilled, it has been a challenge to determine their original, in-situ orientation. In general, the orientation of an ice core is lost as the drill is free to rotate during transport to the surface. For shallow ice cores, it is usually possible to match the adjacent core breaks, which preserves the orientation of the ice column. However, this method fails for deep ice cores, such as the EastGRIP ice core in Northeast Greenland. We provide a method to reconstruct ice core orientation using visual stratigraphy and borehole geometry. As the EastGRIP ice core is drilled through the Northeast Greenland Ice Stream, we use information about the directional structures to perform a full geographical re-orientation. We compared the core orientation with logging data from core break matching and the pattern of the stereographic projections of the crystals' c-axis orientations. Both comparisons agree very well with the proposed orientation method. The method works well for 441 out of 451 samples from a depth of 1375–2120 m in the EastGRIP ice core. It can also be applied to other ice cores, providing a better foundation for interpreting physical properties and understanding the flow of ice. [ABSTRACT FROM AUTHOR]

The EastGRIP (East GReenland Ice core Project) Ice Core is drilled in a highly dynamic area, the North East Greenland Ice Stream (NEGIS), with a surface velocity of 55 m/yr, representing high flow rates in this area. All previous deep ice cores in Greenland were mainly drilled to find undisturbed ice for climate reconstruction. In contrast, the main purpose of this ice core is to increase our understanding of ice flow and linking it to deformation features shown in the physical properties. Some of these deformation features can be made visible using the line scanner device. It scans a polished ice core slab illuminated by an indirect light source (similar to dark field microscopy) and thus makes internal features (e.g. impurities, bubbles, hydrates and partly grain boundaries) visible, creating a 10x165 cm image of the core. Light traveling though the core is reflected and scattered at these features thus causing the camera to detect a bright section where the impurity content is high ("cloudy bands"), whereas ice with a low impurity concentration will not reflect light and contribute a dark layer in the image ("clear bands"). This is used to make layering, i.e. the stratigraphy, visible. Ice from the last glacial period has a well layered stratigraphy resulting from fairly regular annual dust storms in spring to summer. As deformation increases and deformation modes change towards the bottom of the core, these layers will show disturbances and folding. A strong relationship between the δ18O of the water isotopes in the ice core and the impurity concentration, derived from the visual intensity of different layers, can be observed. The correlation of these two makes way for a very precise correlation of the visual stratigraphy and their δ18O age, to analyze differences in deformation modes of ice from different climatic periods.Main deformation in the upper part of the ice sheet is pure shear (stretching along the horizontal and thinning in the vertical) and simple shear in the bottom parts. The gradual change from pure to simple shear is seen in the development of small scale disturbances in the layers, such as wavy patterns. The evolution of these features into z- and s-folds is expected in greater depth. Hereby the layer will deform into a z- or s-shape, overturning a section of the layer. Wavy features, such as the ones seen here, have not been observed in other cores and could be associated to the highly dynamic drill site in NEGIS. [ABSTRACT FROM AUTHOR]

An optimization problem is proposed for inferring physical properties of polycrystals given ultrasonic (elastic) wave velocity measurements, made across multiple sample orientations. The feasibility of the method is demonstrated by inferring both the effective grain elastic parameters and the grain caxis orientation distribution function (ODF) of ice-core samples from Priestley glacier,Antarctica. The method relies on expanding the ODF in terms of a spherical harmonic series, which allows for a non-parametric estimation of the sample ODF. Moreover, any linear combination of the Voigt (strain) and Reuss (stress) homogenization scheme is allowed, although for glacier ice, the exact choice is found to matter little for bulk elastic behaviour, and thus for inferred physical properties, too. Finally, the accuracy of the inferred grain elastic parameters is discussed, including the well-posedness and shortcomings of the inverse problem, relevant for future adoptions in glaciology, geology and elsewhere. [ABSTRACT FROM AUTHOR]

Smith-Johnsen et al. (The Cryosphere, 14, 841–854, 10.5194/tc-14-841-2020, 2020) model the effect of a potential hotspot on the Northeast Greenland Ice Stream (NEGIS). They argue that a heat flux of at least 970 mW m -2 is required to have initiated or to control NEGIS. Such an exceptionally high heat flux would be unique in the world and is incompatible with known geological processes that can raise the heat flux. Fast flow at NEGIS must thus be possible without the extraordinary melt rates invoked in Smith-Johnsen et al. (2020). [ABSTRACT FROM AUTHOR]