Search

Introduction: Continuous passive motion (CPM) is a frequently used method in the early post-operative rehabilitation of patients after knee surgery. In this study, the effectiveness of the CPM method was evaluated after primary total knee arthroplasty during an early recovery period. Methods: Eighty patients undergoing total knee arthroplasty were assigned into two groups. The experimental group received CPM and active exercises, while the control group active exercises only. All subjects were evaluated once before the surgery and at a discharge, in terms of mean active range of motion (AROM), mean Knee Society Score (KSS), and Western Ontario and MacMaster Universities Osteoarthritis Index (WOMAC). Results: The mean AROM for the experimental group was 82.3° ± 14.3° and 76.1° ± 22.2° for the control. The mean KSS score was 136.4 ± 19.3 points for the experimental group, and 135.7 ± 15.1 for the control. There were no statistical differences between the two groups. The KSS functional score was 66.4 ± 8.1 points for the experimental group compared to 62.2 ± 7.3 points for the control, but there was a statistically significant difference between the groups at discharge from the hospital (p = 0.009). A subjective estimation of the pain level, joint stiffness and function also showed a statistically significant difference between the two groups (38.6 ± 14.3 points for the CPM group and 21.2 ± 15.7 for the control). Conclusion: These findings show that there is no significant effect of CPM in terms of improving clinical measurements. However, there was a significant beneficial effect on the subjective assessment of pain level, joint stiffness, and functional ability. [ABSTRACT FROM AUTHOR]

Lithium salt LiHDI (lithium 4,5-dicyano-2-(n-heptafluoropropyl)imidazolide) is proposed as a solid electrolyte interphase-stabilising additive for lithium-ion batteries, which can be added in a smaller amount than fluoroethylene carbonate (FEC) and vinylene carbonate (VC) additives. Electrolytes containing either lithium 4,5-dicyano-2-(trifluoromethyl)imidazolide (LiTDI) or battery-standard LiPF6 were tested with various amounts of LiHDI additive. Chemical stability in the presence of water and the thermal stability of LiHDI are on par with LiTDI. LiHDI additive does not negatively affect the properties of electrolytes. Conductivity measurements of solutions, galvanostatic cycling of graphite-LiFePO4 cells at room temperature, cells' cycling at 60 °C, internal cell resistance monitoring during cycling, and XPS analysis of electrodes' surfaces after cycling have been performed. LiHDI, unlike the FEC-VC mixture, does not negatively affect the properties of the electrolyte. Cycling showed improved capacity retention with LiHDI additive with both graphite and LiFePO4 as capacity-limiting electrodes over samples without additives. At elevated temperatures, samples with LiHDI exhibited better capacity retention during cycling than those with FEC-VC. Internal cell resistance can be correlated with capacity retention. XPS results show changes in the composition of SEI depending on the composition of the electrolyte and the duration of cycling. [ABSTRACT FROM AUTHOR]

Purpose: The study was designed to investigate whether serum concentrations of leptin, resistin and adiponectin in obese and normal-weight patients with primary knee osteoarthritis (OA) correlate with clinical and radiological stages of the disease and percentage of total body fat.Methods: Seventy-three patients with knee OA, divided into obese and normal-weight groups, were clinically evaluated according to the Knee Society Score (KSS), and radiologically assessed using Kellgren and Lawrence scale. The percentage of total body fat and some anthropometric data were also given. Serum leptin, resistin and adiponectin concentrations were measured by Elisa and were correlated with the clinical, radiological and anthropometric parameters.Results: Leptin concentrations were significantly higher (p = 0.001) in the obese patients and positively correlated (R = 0.63) with radiologically assessed OA grade, but only in the normal-weight group. Resistin and adiponectin concentrations were identical in obese and normal-weight patients and negatively correlated (R = -0.41) with the clinical status of obese patients. In both groups, percentage of total body fat positively correlated (R = 0.29 and R = 0.53 for obese and normal-weight respectively) with radiologically assessed OA grade. However, no correlations were found with clinical status of the patients.Conclusions: It was found that in the obese patients with knee OA, increased percentage of total body fat and elevated serum leptin concentration might favour the advancement of clinical but not radiologically assessed changes in the joint structures, while in normal-weight patients it correlates only with radiologically assessed changes but does not affect to an appreciable extent the clinical status of the patients. [ABSTRACT FROM AUTHOR]

Cyclonic windstorms are one of the most important natural hazards for Europe, but robust climate projections of the position and the strength of the North Atlantic storm track are not yet possible, bearing significant risks to European societies and the (re)insurance industry. Previous studies addressing the problem of climate model uncertainty through statistical comparisons of simulations of the current climate with (re-)analysis data show large disagreement between different climate models, different ensemble members of the same model and observed climatologies of intense cyclones. One weakness of such evaluations lies in the difficulty to separate influences of the climate model's basic state from the influence of fast processes on the development of the most intense storms, which could create compensating effects and therefore suggest higher reliability than there really is. This work aims to shed new light into this problem through a cost-effective 'seamless' approach of hindcasting 20 historical severe storms with the two global climate models, ECHAM6 and GA4 configuration of the Met Office Unified Model, run in a numerical weather prediction mode using different lead times, and horizontal and vertical resolutions. These runs are then compared to re-analysis data. The main conclusions from this work are: (a) objectively identified cyclone tracks are represented satisfactorily by most hindcasts; (b) sensitivity to vertical resolution is low; (c) cyclone depth is systematically under-predicted for a coarse resolution of T63 by both climate models; (d) no systematic bias is found for the higher resolution of T127 out to about three days, demonstrating that climate models are in fact able to represent the complex dynamics of explosively deepening cyclones well, if given the correct initial conditions; (e) an analysis using a recently developed diagnostic tool based on the surface pressure tendency equation points to too weak diabatic processes, mainly latent heating, as the main source for the under-prediction in the coarse-resolution runs. Finally, an interesting implication of these results is that the too low number of deep cyclones in many free-running climate simulations may therefore be related to an insufficient number of storm-prone initial conditions. This question will be addressed in future work. [ABSTRACT FROM AUTHOR]

Over 20 years ago it was realized that the traditional methods of the treatment of injuries to joint components: cartilage, menisci and ligaments, did not give satisfactory results and so there is a need of employing novel, more effective therapeutic techniques. Recent advances in molecular biology, biotechnology and polymer science have led to both the experimental and clinical application of various cell types, adapting their culture conditions in order to ensure a directed differentiation of the cells into a desired cell type, and employing non-toxic and non-immunogenic biomaterial in the treatment of knee joint injuries. In the present review the current state of knowledge regarding novel cell sources, in vitro conditions of cell culture and major important biomaterials, both natural and synthetic, used in cartilage, meniscus and ligament repair by tissue engineering techniques are described, and the assets and drawbacks of their clinical application are critically evaluated. [ABSTRACT FROM AUTHOR]

Osteoarthritis (OA) is one of the most common causes of musculoskeletal disability in the world. Traditionally, it has been thought that obesity contributes to the development and progression of OA by increased mechanical load of the joint structures. Nevertheless, studies have shown that adipose tissue-derived cytokines (adipocytokines) are a possible link between obesity and OA. Furthermore, according to recent findings, not only articular cartilage may be the main target of these cytokines but also the synovial membrane, subchondral bone and infrapatellar fat pad may be encompassed in the process of degradation. This review presents the most recent reports on the contribution of adipocytokines to the knee joint cartilage degradation, osteophyte formation, infrapatellar fat pad alterations and synovitis. [ABSTRACT FROM AUTHOR]

Purpose: The use of stem cells in regenerative medicine offers hope to treat numerous orthopaedic disorders, including articular cartilage defects. Although much research has been carried out on chondrogenesis, this complicated process is still not well understood and much more research is needed. The present review provides an overview of the stages of chondrogenesis and describes the effects of various growth factors, which act during the multiple steps involved in stem cell-directed differentiation towards chondrocytes. Methods: The current literature on stem cell-directed chondrogenesis, in particular the role of members of the transforming growth factor-β (TGF-β) superfamily-TGF-βs, bone morphogenetic proteins (BMPs) and fibroblast growth factors (FGFs)-is reviewed and discussed. Results: Numerous studies have reported the chondrogenic potential of both adult- and embryonic-like stem cells and the role of growth factors in programming differentiation of these cells towards chondrocytes. Mesenchymal stem cells (MSCs) are adult multipotent stem cells, whereas induced pluripotent stem cells (iPSC) are reprogrammed pluripotent cells. Although better understanding of the processes involved in the development of cartilage tissues is necessary, both cell types may be of value in the clinical treatment of cartilage injuries or osteoarthritic cartilage lesions. Conclusions: MSCs and iPSCs both present unique characteristics. However, at present, it is still unclear which cell type is most suitable in the treatment of cartilage injuries. [ABSTRACT FROM AUTHOR]

Abstract: Lithium-ion cells utilize almost exclusively monovalent lithium salts as main electrolyte component. Apart from scarce works on sulfonyl imide derivatives, even in terms of basic parameters little is known about multivalent lithium salts' behavior in electrolytes. Here we present the new trivalent lithium salt dedicated to electrolytes for lithium-ion cells. Trilithium 2,2′,2″-tris(trifluoromethyl)benzotris(imidazolate) (Li3BTI) synthesis and its performance in PC and EC:DMC solutions is described in this paper. The structure and stability of this new lithium salt was fully characterized by NMR and Raman techniques as well as thermal methods. Basic electrochemical parameters of electrolytes based on this salt were done by linear sweep voltammetry, lithium cation transference number and conductivity measurements. The salt was designed specifically to manifest extraordinarily high lithium cation transference number (0.73 in EC:DMC 1:1 ratio mixture). However this new salt exhibits also thermal stability of 160 °C and electrochemical stability up to 4.5 V vs Li, as well as conductivities of the 1 mS cm−1 order of magnitude in liquid electrolytes. Promising compatibility results of the obtained electrolyte against Si/C composite anodes are also reported in this paper. [Copyright &y& Elsevier]

Abstract: Non-equilibrium effects in Brownian coagulation at particle number densities that are large in comparison to that of the background gas are analysed theoretically and through computer experiments. With increasing rarefaction of the suspending gas there is a point, when the particle relaxation time becomes longer than the characteristic coagulation time. At that point the average velocity of particles will decrease due to mutual inelastic collisions and will fall below the value predicted by the energy equipartition theorem for there is insufficient time between the collisions to restore the thermal equilibrium. This reduced particle velocity results in a lower coagulation rate than predicted by the classical coagulation theory and this effect is shown through first principle computer experiments using the Langevin dynamics methodology developed in our previous studies on the particle crowding effects, as well as through the novel application of the kinetic Monte Carlo method with the majorant kernel proposed in this work. A theoretical model quantifying the effect of the coagulation rate suppression is formulated by introducing the concept of a thermalization number, which is defined as the reduced mean kinetic energy of particle motion. An expression for this quantity is derived and used to extend the classical coagulation theory to this new non-equilibrium regime of coagulation by following, and extending further, the methodology that we proposed previously to describe the concentration enhancement effects in coagulation. A closed-form, analytical formula for the coagulation kernel is obtained and shown to be applicable for all particle sizes and a wide range of concentrations. Close agreement is demonstrated between the predictions from this formula and the results from first principle simulations in the monodisperse case and this agreement can be improved further still, as well as extended to the polydisperse case, if a single model parameter is allowed to be adjusted from its theoretically derived value. [Copyright &y& Elsevier]

In recent years, increases in the number of articular cartilage injuries caused by environmental factors or pathological conditions have led to a notable rise in the incidence of premature osteoarthritis. Osteoarthritis, considered a disease of civilization, is the leading cause of disability. At present, standard methods for treating damaged articular cartilage, including autologous chondrocyte implantation or microfracture, are short-term solutions with important side effects. Emerging treatments include the use of induced pluripotent stem cells, a technique that could provide a new tool for treatment of joint damage. However, research in this area is still early, and no optimal protocol for transforming induced pluripotent stem cells into chondrocytes has yet been established. Developments in our understanding of cartilage developmental biology, together with the use of modern technologies in the field of tissue engineering, provide an opportunity to create a complete functional model of articular cartilage. [ABSTRACT FROM AUTHOR]

The wings of four papilionid butterfly species of the nireus group, Papillo bromlus, P. epiphorbas, P. nireus and P. oribazus, are marked by blue-green coloured bands surrounded by black margins. The cover scales in the coloured bands contain a violet- absorbing, blue-fluorescing pigment. The fluorescence and absorbance spectra of the nireus group wings are very similar to those of the wings of the Japanese yellow swallowtail, Papillo xuthus, and thus the pigment is presumably papiliochromell. The scale structures of P. xuthus are arranged irregularly, and both the fluorescence and light reflection are diffuse. In the nireus papilionids, the spatial fluorescence distribution of the scales is also diffuse, but the reflection is specular. The scales have a multilayered structure, consisting of two main laminae. We show that the papiliochromell pigment in the upper lamina of the scales functions as a violet-blocking long-pass filter in front of the lower lamina, thus limiting the reflectance spectrum to the blue-green wavelength range. Optical modelling showed that the papiliochromell filter effectively removes the angle dependency of the reflectance spectra - that is, it reduces the wing iridescence. The contribution of the fluorescence signal to the visual appearance is minor. [ABSTRACT FROM AUTHOR]

Background: The approaches currently used in osteoarthritis (OA) are mainly short-term solutions with unsatisfactory outcomes. Cell-based therapies are still controversial (in terms of the sources of cells and the results) and require strict culture protocol, quality control, and may have side-effects. A distinct population of stromal cells has an interesting secretome composition that is underrated and commonly ends up as biological waste. Their unique properties could be used to improve the existing techniques due to protective and anti-ageing properties. Scope of Review: In this review, we seek to outline the advantages of the use of conditioned media (CM) and exosomes, which render them superior to other cell-based methods, and to summarise current information on the composition of CM and their effect on chondrocytes. Major Conclusions: CM are obtainable from a variety of mesenchymal stromal cell (MSC) sources, such as adipose tissue, bone marrow and umbilical cord, which is significant to their composition. The components present in CMs include proteins, cytokines, growth factors, chemokines, lipids and ncRNA with a variety of functions. In most in vitro and in vivo studies CM from MSCs had a beneficial effect in enhance processes associated with chondrocyte OA pathomechanism. General Significance: This review summarises the information available in the literature on the function of components most commonly detected in MSC-conditioned media, as well as the effect of CM on OA chondrocytes in in vitro culture. It also highlights the need to standardise protocols for obtaining CM, and to conduct clinical trials to transfer the effects obtained in vitro to human subjects. [ABSTRACT FROM AUTHOR]

The development of human induced pluripotent stem cells (hiPSCs) is considered a turning point in tissue engineering. However, more data are required to improve understanding of key aspects of the cell differentiation process, including how specific chondrogenic processes affect the gene expression profile of chondrocyte-like cells and the relative value of cell differentiation markers. The main aims of the present study were as follows: To determine the gene expression profile of chondrogenic-like cells derived from hiPSCs cultured in mediums conditioned with HC-402-05a cells or supplemented with transforming growth factor β3 (TGF-β3), and to assess the relative utility of the most commonly-used chondrogenic markers as indicators of cell differentiation. These issues are relevant with regard to the use of human fibroblasts in the reprogramming process to obtain hiPSCs. Human fibroblasts are derived from mesoderm and thus share a wide range of properties with chondrocytes, which originate from the mesenchyme. The hiPSCs were obtained from human primary dermal fibroblasts during a reprogramming process. Two methods, both involving embryoid bodies (EB), were used to obtain chondrocytes from the hiPSCs: EBs formed in the presence of a chondrogenic medium with TGF-β3 (10 ng/ml) and EBs formed in a medium conditioned with growth factors from HC-402-05a cells. Based on reverse transcription-quantitative polymerase chain reaction analysis, the results demonstrated that hiPSCs are capable of effective chondrogenic differentiation, with the cells obtained in the HC-402-05a medium presenting with morphological features and markers characteristic of mature human chondrocytes. In contrast, cells differentiated in the presence of TGF-β3 presented with certain undesirable hypertrophic characteristics. Several genes, most notably runt-related transcription factor 2, transforming growth factor β2 and transforming growth factor β3, were good markers of advanced and late hiPSC chondrogenic differentiation, whereas transforming growth factor β3I, II, III receptors and bone morphogenetic protein-2, bone morphogenetic protein-4 and growth differentiation factor 5 were less valuable. These findings provide valuable data on the use of stem cells in cartilage tissue regeneration. [ABSTRACT FROM AUTHOR]

European windstorms are a high-impact weather phenomenon, regularly inflicting substantial damages, both human and economic. This study examines a set of objectively selected intense European windstorms from the 1979-2015 period using re-analysis and forecast products from the European Centre for Medium-Range Weather Forecasts (ECMWF). The storms are first categorized with respect to their diabatic relative to baroclinic contribution to deepening using the pressure tendency equation, and secondly with respect to their track relative to the jet stream as the large-scale element controlling storm deepening and propagation. As expected, baroclinic processes dominate the majority of storms, such that deepening is closely related to warm advection ahead of the cyclone centre. Contributions from diabatic processes vary strongly and exceed those from horizontal temperature advection in 10 out of 58 cases, with values of up to 60%. Remarkably, in several cases, planetary waves in the stratosphere appear to facilitate cyclogenesis but can also act to oppose deepening in a few cases. The diabatic contribution is significantly correlated with the time a given storm spends on the equatorward side of the jet, where there is greater potential for diabatic processes in the warm, moist air. In terms of forecast quality and consistent with previous studies, the storm core pressure is generally underestimated and storms tend to be too slow and shifted south in the forecast, particularly for longer lead times. These biases, however, reduce markedly with the improvement of the operational system over time. There is no systematic dependence of forecast behaviour on the diabatic contribution or track relative to the jet. In the future, some of these analyses should be repeated with homogeneous reforecast data to substantiate these findings better. [ABSTRACT FROM AUTHOR]

The Met Office in the United Kingdom has developed a completely new probabilistic postprocessing system called IMPROVER to operate on outputs from its operational numerical weather prediction (NWP) forecasts and precipitation nowcasts. The aim is to improve weather forecast information to the public and other stakeholders while better exploiting the current and future generations of underpinning kilometer-scale NWP ensembles. We wish to provide seamless forecasts from nowcasting to medium range, provide consistency between gridded and site-specific forecasts, and be able to verify every stage of the processing. The software is written in a modern modular framework that is easy to maintain, develop, and share. IMPROVER allows forecast information to be provided with greater spatial and temporal detail and a faster update frequency than previous postprocessing. Independent probabilistic processing chains are constructed for each meteorological variable consisting of a series of processing stages that operate on predefined grids and blend outputs from several NWP inputs to give a frequently updated, probabilistic forecast solution. Probabilistic information is produced as standard, with the option of extracting a most likely or yes--no outcome if required. Verification can be performed at all stages, although it is only currently switched on for the most significant stages when run in real time. IMPROVER has been producing real-time output since March 2021 and became operational in spring 2022. [ABSTRACT FROM AUTHOR]

One of the obstacles to autologous chondrocyte implantation (ACI) is obtaining a large quantity of chondrocytes without depletion of their properties. The conditioned medium (CM) from different subpopulations of stem cells (mesenchymal stromal cells (MSC) or induced pluripotent stem cells (iPSC)) could be a gamechanger. MSCs' potential is related to the donor's health and age, which could be omitted when, as a source, iPSCs are used. There is a lack of data regarding their use in the chondrocyte culture expansion. Thus, we wanted to verify whether iPSC-CM could be beneficial for the cell culture of primary chondrocyte cells. We added the iPSC-CMs from GPCCi001-A and ND 41658*H cells to the culture of primary chondrocyte cell lines isolated from OA patients (n = 6) for other two passages. The composition of the CM was evaluated using Luminex technology. Then, we analysed the senescence, proliferation rate and using flow cytometry: viability, distribution of cell cycle phases, production of reactive oxygen species (ROS) and double-strand breaks. The cartilage-related markers were evaluated using Western blot and immunofluorescence. Additionally, a three-dimensional cell culture was used to determine the potential to form cartilage particles. iPSC-CM increased proliferation and diminished cell ROS production and senescence. CM influenced the cartilage-related protein expression and promoted the growth of cartilage particles. The cell exposed to CM did not lose the ECM proteins, suggesting the chondroprotective effect for prolonged culture time. Our preliminary results suggest a beneficial effect on maintaining chondrocyte biology during in vitro expansion. [Display omitted] • iPSC secretome a new source for the management of degenerative diseases such as OA. • iPSC conditioned medium has a beneficial effect on the biology of chondrocytes. • CM increased proliferation, reduced ROS level and senescence of OA chondrocytes. • CM promoted the growth of cartilage particles in 3D culture. [ABSTRACT FROM AUTHOR]

The role of the long noncoding RNA CCAT1 NC_000008.10:g.128220661C > T (rs67085638) in the development of colon cancer has been reported. Therefore, we assessed the prevalence of rs67085638 in patients with gastric cancer (GC). We also evaluated the effect of rs67085638 on B-cell-specific Moloney leukaemia virus insertion site 1 (BMI1) transcripts in primary GC and counterpart histopathologically confirmed disease-free margin tissue. Using high-resolution melting analysis, we evaluated rs67085638 frequency in patients with the GC genotype (n = 214) and controls (n = 502) in a Polish Caucasian population. qRT-PCR was used to determine BMI1 transcripts. We observed the trend of rs67085638 association in all patients with GC (ptrend = 0.028), a strong risk of the GC genotype in male (ptrend = 0.035) but not female (ptrend = 0.747) patients, and the association with non-cardia GC (ptrend = 0.041), tumour stages T3 (ptrend = 0.014) and T4 (ptrend = 0.032), differentiation grading G3 (ptrend = 0.009), lymph node metastasis stage N3 (ptrend = 0.0005) and metastasis stage M0 (ptrend = 0.027). We found that significantly increased BMI1 transcripts were associated with the primary GC genotype classified as grade G3 (p = 0.011) and as lymph node metastasis N3 (p = 0.010) and counterpart marginal tissues (p = 0.026, p = 0.040, respectively) from carriers of the T/T versus C/C genotypes. rs67085638 may contribute to increased BMI1 transcripts and the progression and rapid growth of GC. [ABSTRACT FROM AUTHOR]

The nanoindentation method was applied to determine the elastic modulus and hardness of knee articular cartilage. Cartilage samples from both high weight bearing (HWB) and low weight bearing (LWB) femoral condyles were collected from patients diagnosed with osteoarthritis (OA). The mean elastic modulus of HWB cartilage was 4.46 ± 4.44 MPa in comparison to that of the LWB region (9.81 ± 8.88 MPa, p < 0.001). Similarly, the hardness was significantly lower in HWB tissue (0.317 ± 0.397 MPa) than in LWB cartilage (0.455 ± 0.434 MPa, p < 0.001). When adjusted to patients' ages, the mean elastic modulus and hardness were both significantly lower in the age group over 70 years (p < 0.001). A statistically significant difference in mechanical parameters was also found in grade 3 and 4 OA. This study provides an insight into the nanomechanical properties of the knee articular cartilage and provides a starting point for personalized cartilage grafts that are compatible with the mechanical properties of the native tissue. [ABSTRACT FROM AUTHOR]

One approach to cell differentiation is to use the natural capacity of pluripotent stem cells to form three germ layers via embryoid bodies (EB). However, unification of this process during in vitro culture remains challenging and many microenvironmental factors including the number of cells in the culture can influence differentiation patterns. The number of cells serves a crucial role as it determines access to nutrients, the distribution of oxygen concentration and cellular interactions, all of which influence the fate of the differentiated cells. The influence of EBs derived from human pluripotent cells on the chondrogenic potential of such cells is not well understood. For this reason, the present study sought to determine the effect of varying amounts of cells on the properties of EBs derived from human embryonic stem cells (BG01V cell line). In the present study, 500–2,000 cells per well were cultivated from 5 to 15 days in suspension cell culture. Expression of pluripotency genes and germ layer markers were evaluated in order to determine the EBs with the greatest and least mesodermal properties. Genes associated with pluripotency and chondrogenesis were also evaluated to assess the influence of suspension culture duration and EB size on chondrogenic differentiation. Immunofluorescence staining for pluripotent and chondrocyte-associated proteins confirmed successful differentiation into chondrocyte-like cells. Alcian blue staining confirmed deposition of proteoglycans. These results suggested that EBs formed in 500-cell wells possess the highest mesodermal and prochondrogenic properties. Differentiation of EBs into chondrocytes on day 5 in 500-cell wells was more efficient than in that observed in larger and older EBs. [ABSTRACT FROM AUTHOR]

A human induced pluripotent stem cell line (GPCCi001-A) created by our group was differentiated towards chondrocyte-like cells (ChiPS) via monolayer culturing with growth factors. ChiPS are promising because they have the potential to be used in tissue engineering to regenerate articular cartilage. However, their safety must be confirmed before they can be routinely used in regenerative medicine. Using microarray analysis, we compared the ChiPS to both GPCCi001-A cells and chondrocytes. The analysis showed that, compared to both GPCCi001-A cells and chondrocytes, the expression of genes engaged in DNA damage and in the tumor protein p53 signalling pathways was significantly higher in the ChiPS. The significant amount of DNA double strand breaks and increased DNA damage response may lead to incomplete DNA repair and the accumulation of mutations and, ultimately, to genetic instability. These findings provide evidence indicating that the differentiation process in vitro places stress on human induced pluripotent stem cells (hiPSCs). The results of this study raise doubts about the use of stem cell-derived components given the negative effects of the differentiation process in vitro on hiPSCs. [ABSTRACT FROM AUTHOR]

Human induced pluripotent stem cells (hiPSCs) constitute an important breakthrough in regenerative medicine, particularly in orthopedics, where more effective treatments are urgently needed. Despite the promise of hiPSCs only limited data on in vitro chondrogenic differentiation of hiPSCs are available. Therefore, we compared the gene expression profile of pluripotent genes in hiPSC-derived chondrocytes (ChiPS) to that of an hiPSC cell line created by our group (GPCCi001-A). The results are shown on heatmaps and plots and confirmed by Reverse Transcription Quantitative Polymerase Chain Reaction (RT-qPCR) analysis. Unlike the ChiPS, our GPCCi001-A cells maintained their pluripotency state during long-term culture, thus demonstrating that this cell line was comprised of stable, fully pluripotent hiPSCs. Moreover, these chondrocyte-like cells not only presented features that are characteristic of chondrocytes, but they also lost their pluripotency, which is an important advantage in favor of using this cell line in future clinical studies. [ABSTRACT FROM AUTHOR]

Human induced pluripotent stem cells (hiPSCs) offer promise in regenerative medicine, however more data are required to improve understanding of key aspects of the cell differentiation process, including how specific chondrogenic processes affect the gene expression profile of chondrocyte-like cells and the relative value of cell differentiation markers. The main aims of the present study were as follows: To determine the gene expression profile of chondrogenic-like cells derived from hiPSCs cultured in mediums conditioned with HC-402-05a cells or supplemented with transforming growth factor β3 (TGF-β3), and to assess the relative utility of the most commonly used chondrogenic markers as indicators of cell differentiation. These issues are relevant with regard to the use of human fibroblasts in the reprogramming process to obtain hiPSCs. Human fibroblasts are derived from the mesoderm and thus share a wide range of properties with chondrocytes, which also originate from the mesenchyme. Thus, the exclusion of dedifferentiation instead of chondrogenic differentiation is crucial. The hiPSCs were obtained from human primary dermal fibroblasts during a reprogramming process. Two methods, both involving embryoid bodies (EB), were used to obtain chondrocytes from the hiPSCs: EBs formed in a chondrogenic medium supplemented with TGF-β3 (10 ng/ml) and EBs formed in a medium conditioned with growth factors from HC-402-05a cells. Based on immunofluorescence and reverse transcription-quantiative polymerase chain reaction analysis, the results indicated that hiPSCs have the capacity for effective chondrogenic differentiation, in particular cells differentiated in the HC-402-05a-conditioned medium, which present morphological features and markers that are characteristic of mature human chondrocytes. By contrast, cells differentiated in the presence of TGF-β3 may demonstrate hypertrophic characteristics. Several genes [paired box 9, sex determining region Y-box (SOX) 5, SOX6, SOX9 and cartilage oligomeric matrix protein] were demonstrated to be good markers of early hiPSC chondrogenic differentiation: Insulin-like growth factor 1, Tenascin-C, and β-catenin were less valuable. These observations provide valuable data on the use of hiPSCs in cartilage tissue regeneration. [ABSTRACT FROM AUTHOR]

Stem cells (SCs) are a promising approach to regenerative medicine, with the potential to treat numerous orthopedic disorders, including osteo-degenerative diseases. The development of human-induced pluripotent stem cells (hiPSCs) has increased the potential of SCs for new treatments. However, current methods of differentiating hiPSCs into chondrocyte-like cells are suboptimal and better methods are needed. The aim of the present study was to assess four different chondrogenic differentiation protocols to identify the most efficient method of generating hiPSC-derived chondrocytes. For this study, hiPSCs were obtained from primary human dermal fibroblasts (PHDFs) and differentiated into chondrocyte-like cells using four different protocols: 1) monolayer culture with defined growth factors (GF); 2) embryoid bodies (EBs) in a chondrogenic medium with TGF-β3 cells; 3) EBs in chondrogenic medium conditioned with human chondrocytes (HC-402-05a cell line) and 4) EBs in chondrogenic medium conditioned with human chondrocytes and supplemented with TGF-β3. The cells obtained through these four protocols were evaluated and compared at the mRNA and protein levels. Although chondrogenic differentiation of hiPSCs was successfully achieved with all of these protocols, the two fastest and most cost-effective methods were the monolayer culture with GFs and the medium conditioned with human chondrocytes. Both of these methods are superior to other available techniques. The main advantage of the conditioned medium is that the technique is relatively simple and inexpensive while the directed method (i.e., monolayer culture with GFs) is faster than any protocol described to date because it is does not require additional steps such as EB formation. [ABSTRACT FROM AUTHOR]

Introduction: Human articular cartilage has a poor regenerative capacity. This often results in the serious joint disease-osteoarthritis (OA) that is characterized by cartilage degradation. An inability to self-repair provided extensive studies on AC regeneration. The cell-based cartilage tissue engineering is a promising approach for cartilage regeneration. So far, numerous cell types have been reported to show chondrogenic potential, among others human embryonic stem cells (hESCs). Materials and methods: However, the currently used methods for directed differentiation of human ESCs into chondrocyte-like cells via embryoid body (EB) formation, micromass culture (MC) and pellet culture (PC) are not highly efficient and require further improvement. In the present study, these three methods for hESCs differentiation into chondrocyte-like cells in the presence of chondrogenic medium supplemented with diverse combination of growth factors (GFs) were evaluated and modified. Results: The protocols established here allow highly efficient, simple and inexpensive production of a large number of chondrocyte-like cells suitable for transplantation into the sites of cartilage injury. The most crucial issue is the selection of appropriate GFs in defined concentration. The obtained stem-derived cells reveal the presence of chondrogenic markers such as type II collagen, Sox6 and Sox9 as well as the lack or significantly lower level of pluripotency markers including Nanog and Oct3/4. Discussion: The most efficient method is the differentiation throughout embryoid bodies. In turn, chondrogenic differentiation via pellet culture is the most promising method for implementation on clinical scale. The most useful GFs are TGF-β1, -3 and BMP-2 that possess the most chondrogenic potential. These methods can also be used to obtain chondrocyte-like cells from differentiating induced pluripotent stem cells (iPSCs). [ABSTRACT FROM AUTHOR]

The development of induced pluripotent stem cells has brought unlimited possibilities to the field of regenerative medicine. This could be ideal for treating osteoarthritis and other skeletal diseases, because the current procedures tend to be short-term solutions. The usage of induced pluripotent stem cells in the cell-based regeneration of cartilage damages could replace or improve on the current techniques. The patient's specific non-invasive collection of tissue for reprogramming purposes could also create a platform for drug screening and disease modelling for an overview of distinct skeletal abnormalities. In this review, we seek to summarise the latest achievements in the chondrogenic differentiation of pluripotent stem cells for regenerative purposes and disease modelling. [ABSTRACT FROM AUTHOR]

Background: Surgery of meniscus tear results in limitation of function. The aim of study was functional assessment of knee 1 year after surgery with two techniques in cases of the medial meniscus tear followed by the same supervised rehabilitation. Materials and methods: A total of 30 patients with good KOSS scores constituted two equal groups after partial meniscectomy or meniscus suture. Measurements of knee extensors and flexors muscles peak torques were performed with angular velocities 60, 180, 240 and 300 s using Biodex IV system. One-leg-hop and one-leg-rising tests ascertained the function of operated knee. Results of examinations were compared with reference to healthy volunteers. Results of biomechanical and clinical studies were correlated to create complex and objective method evaluating treatment. Results: Extensors peak torque values at 60 s angular velocity and H/Q coefficient were decreased after meniscectomy more than meniscus suture in comparison to healthy volunteers ( P ≤ 0.001; P ≤ 0.05). Analysis of functional tests revealed that patients after meniscectomy showed difference between operated and non-operated knee ( P ≤ 0.01) while patients with meniscus suture differed the least to controls ( P ≤ 0.05). Extensors peak torque values at 60 s angular velocity correlated with results of one-leg-rising test. Conclusion: Results suggest worse functional effects when meniscectomy is applied which implies modification of the rehabilitative methods in a postoperative period. [ABSTRACT FROM AUTHOR]

Background: A partial duplication of the distal long arm of chromosome 5 (5q35- > qter) is known to be associated with a distinct phenotype referred to as Hunter-McAlpine syndrome. Clinical spectrum of this disorder mainly consists of mental retardation, microcephaly, short stature, skeletal anomalies, and craniofacial dysmorphism featuring flat facies, micrognathia, large, low-set dysplastic ears, hypertelorism, almond-shaped, down-slanted palpebral fissures, epicanthal folds, small nose, long philtrum, small mouth, and thin upper lip. Less frequent remarkable findings include craniosynostosis, heart defect, hypoplastic phalanges, preaxial polydactyly, hypospadias, cryptorchidism, and inguinal hernia. In most patients with a partial duplication of 5q the aberration occurred due to an inherited unbalanced translocation, therefore the phenotype was not reflective of pure trisomy 5q. Case presentation: We report on a 9.5-year-old boy with some feature of Hunter-McAlpine syndrome including short stature, complex heart defect (dextrocardia, dextroversion, PFO), bilateral cryptorchidism, hypothyroidism, and craniofacial dysmorphism. Additionally, bilateral radial agenesis with complete absence of Ist digital rays, ulnar hypoplasia with bowing, choroidal and retinal coloboma, abnormal biliary vesicle were identified, which have never been noted in 5q trisomy patients. Karyotype analysis, sequencing and MLPA for TBX5 and SALL4 genes were unremarkable. Array comparative genomic hybridization detected a duplication on 5q35.2-5q35.3, resulting from a de novo chromosomal rearrangement. Our proband carried the smallest of all previously reported pure distal 5q trisomies encompassing terminal 5.4-5.6 Mb and presented with the most severe limb malformation attributed to the increased number of distal 5q copies. Conclusions: We postulate that a terminal distal trisomy of 5q35.2-5q35.3, which maps 1.1 Mb telomeric to the MSX2 gene is causative for both radial agenesis and complex heart defect in our proband. A potential candidate gene causative for limb malformation in our proband could be FGFR4, which maps relatively in the closest position to the chromosomal breakage site (about 1.3 Mb) from all known 5q duplications. Since the limb malformation as well as the underlying genetic defect are distinct from other 5q trisomy patient we propose that a position effect resulting in altered long-range regulation of the FGFR4 (alternatively MSX2) may be responsible for the limb malformation in our proband. [ABSTRACT FROM AUTHOR]

Nanoemulsion systems receive a significant amount of interest nowadays due to their promising potential in biomedicine and food technology. Using a two-step process, we produced a series of nanoemulsion systems with different concentrations of hemp seed oil (HSO) stabilized with Aesculus hippocastanum L. extract (AHE). Water and commercially-available low-concentrated hyaluronic acid (HA) were used as the liquid phase. Stability tests, including an emulsifying index (EI), and droplet size distribution tests performed by dynamic light scattering (DLS) proved the beneficial impact of AHE on the emulsion's stability. After 7 days of storage, the EI for the water-based system was found to be around 100%, unlike the HA systems. The highest stability was achieved by an emulsion containing 5% HSO and 2 g/L AHE in water, as well as the HA solution. In order to obtain the detailed characteristics of the emulsions, UV-Vis and FTIR spectra were recorded, and the viscosity of the samples was determined. Finally, a visible microscopic analysis was used for the homogeneity evaluation of the samples, and was compared with the DLS results of the water system emulsion, which showed a desirable stability. The presented results demonstrate the possible use of oil emulsions based on a plant extract rich in saponins, such as AHE. Furthermore, it was found that the anti-inflammatory properties of AHE provide opportunities for the development of new emulsion formulations with health benefits. [ABSTRACT FROM AUTHOR]

Unlabelled Image • Physicochemical and electrochemical properties of the LCO cathodes vary strongly on a chemical composition. • Significantly improved cycling stability by the addition of yttrium oxide • Superior cycling performance of the LCO cathode with 5 mol% of yttrium [ABSTRACT FROM AUTHOR]

Ni-rich layered oxides, i.e., LiNi0.6Mn0.2Co0.2O2 (NMC622) and LiNiO2 (LNO), were prepared using the two-step calcination procedure. The samples obtained at different calcination temperatures (750–950 °C for the NMC622 and 650–850 °C for the LNO cathode materials) were characterized using nitrogen physisorption, PXRD, SEM and DLS methods. The correlation of the calcination temperature, structural properties and electrochemical performance of the studied Ni-rich layered cathode materials was thoroughly investigated and discussed. It was determined that the optimal calcination temperature is dependent on the chemical composition of the cathode materials. With increasing nickel content, the optimal calcination temperature shifts towards lower temperatures. The NMC-900 calcined at 900 °C and the LNO-700 calcined at 700 °C showed the most favorable electrochemical performances. Despite their well-ordered structure, the materials calcined at higher temperatures were characterized by a stronger sintering effect, adverse particle growth, and higher Ni2+/Li+ cation mixing, thus deteriorating their electrochemical properties. The importance of a careful selection of the heat treatment (calcination) temperature for each individual cathode material was emphasized. [ABSTRACT FROM AUTHOR]

Cartilage and bone injuries are prevalent ailments, affecting the quality of life of injured patients. Current methods of treatment are often imperfect and pose the risk of complications in the long term. Therefore, tissue engineering is a rapidly developing branch of science, which aims at discovering effective ways of replacing or repairing damaged tissues with the use of scaffolds. However, both cartilage and bone owe their exceptional mechanical properties to their complex ultrastructure, which is very difficult to reproduce artificially. To address this issue, nanotechnology was employed. One of the most promising nanomaterials in this respect is carbon nanotubes, due to their exceptional physico-chemical properties, which are similar to collagens—the main component of the extracellular matrix of these tissues. This review covers the important aspects of 3D scaffold development and sums up the existing research tackling the challenges of scaffold design. Moreover, carbon nanotubes-reinforced bone and cartilage scaffolds manufactured using the 3D bioprinting technique will be discussed as a novel tool that could facilitate the achievement of more biomimetic structures. [ABSTRACT FROM AUTHOR]

In this study, two saponins-rich plant extracts, viz. Saponaria officinalis and Quillaja saponaria, were used as surfactants in an oil-in-water (O/W) emulsion based on hempseed oil (HSO). This study focused on a low oil phase content of 2% v/v HSO to investigate stable emulsion systems under minimum oil phase conditions. Emulsion stability was characterized by the emulsification index (EI), centrifugation tests, droplet size distribution as well as microscopic imaging. The smallest droplets recorded by dynamic light scattering (droplets size v. number), one day after the preparation of the emulsion, were around 50–120 nm depending the on use of Saponaria and Quillaja as a surfactant and corresponding to critical micelle concentration (CMC) in the range 0–2 g/L. The surface and interfacial tension of the emulsion components were studied as well. The effect of emulsions on environmental bacteria strains was also investigated. It was observed that emulsions with Saponaria officinalis extract exhibited slight toxic activity (the cell metabolic activity reduced to 80%), in contrast to Quillaja emulsion, which induced Pseudomonas fluorescens ATCC 17400 growth. The highest-stability samples were those with doubled CMC concentration. The presented results demonstrate a possible use of oil emulsions based on plant extract rich in saponins for the food industry, biomedical and cosmetics applications, and nanoemulsion preparations. [ABSTRACT FROM AUTHOR]

The new strategies of introducing lithium ions into nickel‑manganese‑cobalt carbonate resulting in LiNi 0.6 Mn 0.2 Co 0.2 O 2 (NMC622) cathode material for Li-ion batteries were described. The proposed novel method is based on the co-precipitation of nickel‑manganese‑cobalt carbonate followed by wet impregnation with solutions of selected lithium salts (hydroxide, acetate or nitrate). The results of detailed characterization studies using nitrogen physisorption, TGA-MS, PXRD, SEM and DLS analysis indicate that wet impregnation using different lithium salts formed cathode materials of well-ordered layered structure with chemical composition and microstructure similar to that obtained using solid state reaction method. Galvanostatic cell cycling revealed promising electrochemical activity of all the NMC622 materials prepared using the proposed method. The first cycle discharge capacities of the materials obtained using lithium hydroxide, acetate, nitrate and carbonate are 177, 181, 180 and 187 mAh g−1at 0.05C rate to 4.4 V vs. Li/Li+, whereas the discharge capacity retentions are 88, 91, 93 and 91% at 0.5C rate after 30 cycles, respectively. The best performance in the range of 0.1C-10C rates exhibited the cathode materials synthesized by wet impregnation method using lithium acetate and lithium nitrate as Li ions precursor. • NMC622 cathode materials for high-capacity Li-ion batteries • An impact of Li ions source on an electrochemical performance of cathode materials • Introduction of Li+ by wet impregnation more effective than conventional method • The best performance of the NMC622 obtained using lithium acetate or nitrate [ABSTRACT FROM AUTHOR]

Human induced pluripotent stem cells (hiPSCs) play an important role in research regarding regenerative medicine. Particularly, chondrocytes differentiated from hiPSCs seems to be a promising solution for patients suffering from osteoarthritis. We decided to perform chondrogenesis in a three-week monolayer culture. Based on transcriptome analysis, hiPSC-derived chondrocytes (ChiPS) demonstrate the gene expression profile of cells from early chondrogenesis. Chondrogenic progenitors obtained by our group are characterized by significantly high expression of Hox genes, strongly upregulated during limb formation and morphogenesis. There are scanty literature data concerning the role of microRNAs in early chondrogenesis, especially in chondrogenic differentiation of hiPSCs. The main aim of this study was to investigate the microRNA expression profile and to select microRNAs (miRNAs) taking part in early chondrogenesis. Our findings allowed for selection crucial miRNAs engaged in both diminishing pluripotency state and chondrogenic process (inter alia hsa-miR-525-5p, hsa-miR-520c-3p, hsa-miR-628-3p, hsa-miR-196b-star, hsa-miR-629-star, hsa-miR-517b, has-miR-187). These miRNAs regulate early chondrogenic genes such as: HOXD10, HOXA11, RARB, SEMA3C. These results were confirmed by RT-qPCR analysis. This work contributes to a better understanding of the role of miRNAs directly involved in chondrogenic differentiation of hiPSCs. These data may result in the establishment of a more efficient protocol of obtaining chondrocyte-like cells from hiPSCs. [ABSTRACT FROM AUTHOR]

The repair of damaged articular cartilage using currently available implantation techniques is not sufficient for the full recovery of patients. Pluripotent stem cells (iPSC)-based therapies could bring new perspectives in the treatment of joint diseases. A number of protocols of in vitro differentiation of iPSC in chondrocytes for regenerative purposes have been recently described. However, in order to use these cells in clinics, the elimination of animal serum and feeder cells is essential. In our study, a strictly defined and controllable protocol was designed for the differentiation of pluripotent stem cells (BG01V, ND 41658*H, GPCCi001-A) in chondrocyte-like cells in serum- and a feeder cell-free system, using the embryoid bodies step. The extension of the protocol and culture conditions (monolayer versus 3D culture) was also tested after the initial 21 days of chondrogenic differentiation. Promotion of the chondrogenic differentiation in 3D culture via the elevated expression of genes related to chondrogenesis was achieved. Using immunofluorescence and immunohistochemistry staining techniques, the increased deposition of the specific extracellular matrix was indicated. As a result, chondrocyte-like cells in the early stages of their differentiation using pellet culture under fully controlled and defined conditions were obtained. [ABSTRACT FROM AUTHOR]

A new family of fluorine-free solid-polymer electrolytes, for use in sodium-ion battery applications, is presented. Three novel sodium salts withdiffuse negative charges: sodium pentacyanopropenide (NaPCPI), sodium 2,3,4,5-tetracyanopirolate (NaTCP) and sodium 2,4,5-tricyanoimidazolate (NaTIM) were designed andtested in a poly(ethylene oxide) (PEO) matrix as polymer electrolytes for anall-solid sodium-ion battery. Due to unique, non-covalent structural configurations of anions, improved ionic conductivities were observed. As an example, 'liquid-like' high conductivities (>1 mS cm−1) were obtained above 70 °C for solid-polymer electrolyte with a PEO to NaTCP molar ratio of 16:1. All presented salts showed high thermal stability and suitable windows of electrochemical stability between 3 and 5 V. These new anions open a new class of compounds with non-covalent structure for electrolytes system applications. [ABSTRACT FROM AUTHOR]