Search

The effects of reduction by H2 and by heat treatment in vacuum and in O2 flow on Rh particle size changes of Rh/CeO2 samples were studied by X-ray photoelectron spectroscopy (XPS), high-resolution electron microscopy (HRTEM), and CO adsorption followed by diffuse reflectance infrared spectroscopy (DRIFTS). Low-temperature (373-423 K) reduction of Rh without agglomeration is demonstrated. An average particle size of 2.3 ± 1.1 nm was measured by HRTEM regardless of the metal loading (1-5%). On Rh/CeO2, a significant particle size increase of the Rh particles was detected on heating (773 K). In this work, we suggest that the temperature-induced surface decrease resulting from the sintering of Rh is favored only for well-dispersed particles. XP spectra revealed that the mobile oxygens of CeO2 fundamentally determine the oxidation state of the supported metals. At elevated temperature, the oxidation of the reduced support surface as well as the metal component takes place because of the segregation of ceria oxygens. When the aggregated particles were reoxidized, the redispersion of Rh was observed probably because of the formation of Rh-O-Ce bonds. [ABSTRACT FROM AUTHOR]

Abstract: Tungsten-trioxide nanowire bundles were prepared using a simple hydrothermal method. Sodium-tungstate was used as precursor and sodium-sulfate as structure directing agent. All the reflections of the X-ray diffractogram of the synthesized wires belong to the hexagonal phase of the tungsten trioxide. The nanowires were successfully decorated with metal nanoparticles by wet impregnation. The TEM investigation showed that using different metal precursors resulted in different particle sizes and coverage on the surface. [Copyright &y& Elsevier]

One weight percent of differently sized Au nanoparticles were deposited on two commercially available TiO2 photocatalysts: Aeroxide P25 and Kronos Vlp7000. The primary objective was to investigate the influence of the noble metal particle size and the deposition method on the photocatalytic activity. The developed synthesis method involves a simple approach for the preparation of finely-tuned Au particles through variation of the concentration of the stabilizing agent. Au was deposited on the TiO2 surface by photo- or chemical reduction, using trisodium citrate as a size-tailoring agent. The Au-TiO2 composites were synthetized by in situ reduction or by mixing the titania suspension with a previously prepared gold sol. The H2 production activities of the samples were studied in aqueous TiO2 suspensions irradiated with near-UV light in the absence of dissolved O2, with oxalic acid or methanol as the sacrificial agent. The H2 evolution rates proved to be strongly dependent on Au particle size: the highest H2 production rate was achieved when the Au particles measured ∼6 nm. [ABSTRACT FROM AUTHOR]

Abstract: The photo-induced vapor-phase decompositions of formic acid and methyl formate were investigated on pure, N-doped and Au-promoted TiO2. Infrared (IR) spectroscopic studies revealed that illumination initiated the decomposition of adsorbed formate formed in the dissociation of formic acid and located mainly on TiO2. The photocatalytic decompositions of formic acid and methyl formate vapor on pure TiO2 occurred to only a limited extent. The deposition of Au on pure or doped TiO2 markedly enhanced the extent of photocatalytic decomposition of formic acid. The main process was dehydrogenation to give H2 and CO2. The formation of CO occurred to only a very small extent. Addition of O2 or H2O to the formic acid decreased the CO level from ∼0.8% to ∼0.088%. Similar features were experienced in the photocatalytic decomposition of methyl formate, which dissociated in part to give surface formate. Experiments over Au deposited on N-doped TiO2 revealed that the photo-induced decomposition of both compounds occurs even in visible light. [Copyright &y& Elsevier]

The synthesis and characterization of a silver-containing hybrid material is reported as a novel heterogeneous noble metal catalyst. In order to eliminate the need for traditional immobilization techniques, and to create a solid material with structurally-bound silver catalytic centers, the layered structure of a naturally occurring mineral served as the basis of the initial catalyst design. The novel material was prepared by means of the urea-mediated homogeneous precipitation of the corresponding metal nitrates, and was fully characterized by means of diverse instrumental techniques (X-ray diffractometry, Raman, IR, UV-Vis, EPR, X-ray photoelectron spectroscopies, thermal methods as well as atomic force, scanning and transmission electron microscopies). The as-prepared material exhibited outstanding activity in silver-catalyzed C≡C bond activation to yield organic nitriles directly from terminal alkynes with less environmental concerns as compared to the classical synthesis methods. The effects of the reaction time, the temperature, as well as the role of various solvents, nitrogen sources and additives were carefully scrutinized in order to achieve high-yielding and selective nitrile formation. The heterogeneous nature of the reaction was verified and the solid catalyst was recycled and reused numerous times without loss of its activity or degradation of its structure, thereby offering a sustainable synthetic methodology. [ABSTRACT FROM AUTHOR]

Intercalated composite materials were prepared with CaAl-layered double hydroxide as host and Cu(II)-amino acid ( l -cysteine, l -histidine and l -tyrosine) complex anions as guests. Two methods (intercalation of the ligand first followed by constructing the complex; preforming the complex first, then introducing it among the layers of the host) and optimization of the synthesis conditions were performed to obtain composites having the complex exclusively among the layers. The composite materials were structurally characterized by powder X-ray diffractometry, mid infrared (IR) spectroscopy with ATR (attenuated total reflectance) or photoacoustic detections, transmission and scanning electron microscopies and X-ray photoelectron spectroscopy. Structural features of the intercalant (coordination number, coordination sites) were elucidated by classical chemical and energy dispersive X-ray analyses, EPR (electron paramagnetic spectroscopy), X-ray absorption and far IR spectroscopies. Structural models based on these methods are also given. Catalytic activities, selectivities and recycling abilities of the substances were studied in the oxidation reactions of cyclohexene with peracetic acid and in situ formed iodosylbenzene as oxidants in the liquid phase. The catalysts were active in the Ullmann coupling reaction as well. The intercalated substances were found to be efficient and highly selective catalysts with very good recycling abilities. [ABSTRACT FROM AUTHOR]

Background Tissue-specific dipeptidyl-peptidase 4 ( DPP4) dysregulation has been described in adults with diabetes mellitus. The DPP4 -incretin system has not been studied in foetal life. In this study, DPP4 activity and glucagon-like peptide-1 ( GLP-1) levels were assessed in cord blood of neonates born to women with gestational diabetes mellitus ( GDM) and nondiabetic controls. Material and methods This study has been conducted in two Hungarian and one Austrian centres. Patients: A total of 568 pregnant women were enrolled in the study after their OGTT between the 24th and 28th gestational week. Cord blood samplings with DPP4 activity and GLP-1 level measurements were possible in 270 ( DPP4: 159 control, 111 GDM) and 112 ( GLP-1: 72 control, 40 GDM) cases. OGTT (24-28th gestational week) and cord blood sampling at delivery were performed. Cord serum DPP4 activity was determined in a continuous monitoring microplate-based kinetic assay, and cord plasma GLP-1 was measured using a fluorescence ELISA method. Results Cord serum DPP4 activity was lower in GDM [mean (95% CI): 28·07 U/L (26·32-29·82 U/L)] than in controls [31·61 U/L (29·93-33·29 U/L), MWU P = 0·0015]. Cord plasma active GLP-1 levels were close to the lower detection limit and were not altered in GDM (control: mean = 3·43 pM, 95% CI: 3·04-3·82 pM, GDM: mean = 3·61 pM, 95% CI: 2·96-4·28 pM - MWU test P = 0·6). Conclusions Decreased cord serum DPP4 activity in gestational diabetes mellitus might be the result of an adaptive foetal response or an early dysregulation in the entero-insular axis with consequences beyond the incretin system. Cord plasma GLP-1 levels may reflect the missing oral intake with a limited glucose sensing of L cells via the circulation in foetal life. [ABSTRACT FROM AUTHOR]

The primary objective of the experiments was to investigate the differences in the photocatalytic performance when commercially available Aeroxide P25 TiO2 photocatalyst was deposited with differently sized Pt nanoparticles with identical platinum content (1 wt%). The noble metal deposition onto the TiO2 surface was achieved by in situ chemical reduction (CRIS) or by mixing chemically reduced Pt nanoparticle containing sols to the aqueous suspensions of the photocatalysts (sol-impregnated samples, CRSIM). Fine and low-scale control of the size of resulting Pt nanoparticles was obtained through variation of the trisodium citrate concentration during the syntheses. The reducing reagent was NaBH4. Photocatalytic activity of the samples and the reaction mechanism were examined during UV irradiation (λmax = 365 nm) in the presence of oxalic acid (50 mM) as a sacrificial hole scavenger component. The H2 evolution rates proved to be strongly dependent on the Pt particle size, as well as the irradiation time. A significant change of H2 formation rate during the oxalic acid transformation was observed which is unusual. It is probably regulated both by the decomposition rate of accumulated oxalic acid and the H+/H2 redox potential on the surface of the catalyst. The later potential is influenced by the concentration of the dissolved H2 gas in the reaction mixture. [ABSTRACT FROM AUTHOR]

Abstract: Objective: The cut-off value for salivary cortisol measurement for the diagnosis of Cushing''s syndrome (CS) may depend both on the severity of the disease and the composition of control group. Therefore, we examined the utility of midnight salivary cortisol measurements in patients who were evaluated for signs and symptoms of CS or because they had adrenal incidentalomas. Because serum osteocalcin (OC) is considered as a sensitive marker of hypercortisolism, we also investigated whether OC could have a role in the diagnosis of CS. Patients and methods: Each of the 151 patients was included into one of the following groups: (A) overt CS (n =23), (B) subclinical CS (n =18), (C) inactive adrenal adenomas (n =40), (D) patients without HPA disturbances (n =70). Patients (C+D) were used as controls. Serum, salivary and urinary cortisol, and OC were measured by electrochemiluminescence immunoassay. Results: Group A had suppressed OC as compared to both group B and group (C+D). Serum and salivary cortisol concentrations showed strong negative correlations with OC in patients with overt CS. The areas under the curves of salivary and serum cortisol at 24:00h (0.9790 and 0.9940, respectively) serum cortisol after low dose dexamethasone test (0.9930) and OC (0.9220) obtained from ROC aanalysis for the diagnosis of overt CS were not statistically different. Conclusion: This study confirms the usefulness of midnight salivary cortisol measurements in the diagnosis of overt CS in the everyday endocrinological praxis. Our results suggest that OC may have a role in the diagnosis of overt CS. [Copyright &y& Elsevier]