Search

The quest towards the integration of ultra-fast, high-precision optical clocks is reflected in the large number of high-impact papers on the topic published in the last few years. This interest has been catalysed by the impact that high-precision optical frequency combs (OFCs) have had on metrology and spectroscopy in the last decade [ 1–5 ]. OFCs are often referred to as optical rulers: their spectra consist of a precise sequence of discrete and equally-spaced spectral lines that represent precise marks in frequency. Their importance was recognised worldwide with the 2005 Nobel Prize being awarded to T.W. Hänsch and J. Hall for their breakthrough in OFC science [ 5 ]. They demonstrated that a coherent OFC source with a large spectrum – covering at least one octave – can be stabilised with a self-referenced approach, where the frequency and the phase do not vary and are completely determined by the source physical parameters. These fully stabilised OFCs solved the challenge of directly measuring optical frequencies and are now exploited as the most accurate time references available, ready to replace the current standard for time. Very recent advancements in the fabrication technology of optical micro-cavities [ 6 ] are contributing to the development of OFC sources. These efforts may open up the way to realise ultra-fast and stable optical clocks and pulsed sources with extremely high repetition-rates, in the form of compact and integrated devices. Indeed, the fabrication of high-quality factor (high-Q) micro-resonators, capable of dramatically amplifying the optical field, can be considered a photonics breakthrough that has boosted not only the scientific investigation of OFC sources [ 7–13 ] but also of optical sensors and compact light modulators [ 6,14 ]. In this framework, the demonstration of planar high-Q resonators, compatible with silicon technology [ 10–14 ], has opened up a unique opportunity for these devices to provide entirely new capabilities for photonic-integrated technologies. Indeed, it is well acknowledged by the electronics industry that future generations of computer processing chips will inevitably require an extremely high density of copper-based interconnections, significantly increasing the chip power dissipation to beyond practical levels [ 15–17 ]; hence, conventional approaches to chip design must undergo radical changes. On-chip optical networks, or optical interconnects, can offer high speed and low energy per-transferred-bit, and micro-resonators are widely seen as a key component to interface the electronic world with photonics. Many information technology industries have recently focused on the development of integrated ring resonators to be employed for electrically-controlled light modulators [ 14–17 ], greatly advancing the maturity of micro-resonator technology as a whole. Recently [ 11–13 ], the demonstration of OFC sources in micro-resonators fabricated in electronic (i.e. in complementary metal oxide semiconductor (CMOS)) compatible platforms has given micro-cavities an additional appeal, with the possibility of exploiting them as light sources in microchips. This scenario is creating fierce competition in developing highly efficient OFC generators based on micro-cavities which can radically change the nature of information transport and processing. Even in telecommunications, perhaps a more conventional environment for optical technologies, novel time-division multiplexed optical systems will require extremely stable optical clocks at ultra-high pulse repetition-rates towards the THz scale. Furthermore, arbitrary pulse generators based on OFC [ 18,19 ] are seen as one of the most promising solutions for this next generation of high-capacity optical coherent communication systems. This review will summarise the recent exciting achievements in the field of micro-combs, namely optical frequency combs based on high-Q micro-resonators, with a perspective on both the potential of this technology, as well as the open questions and challenges that remain. [ABSTRACT FROM AUTHOR]

ABSTRACT Ring opening polymerization (ROP) of N-carboxy anhydride (NCA) amino acids presents a rapid way to synthesize high molecular weight polypeptides with different amino acid compositions. The compositional and functional versatility of polypeptides make these materials an attractive choice for biomaterials. The functional performance of polypeptide materials is equally linked to their conformation which is determined by the amino acid sequence in the polymer chains. Here, the interplay between composition and conformation of synthetic polypeptides obtained by NCA polymerization was explored. Various copolypeptides from Glu(Bzl) and Ser(Bzl) were prepared to investigate how polypeptide composition affected the conformation of the resulting copolymer. Polymerization kinetics indicated that the copolymerization of Glu(Bzl) and Ser(Bzl) preferentially yielded alternating copolymers. Both the polydispersity and the conformation of the polypeptides were dependent on the Ser(Bzl) content in the polymer, demonstrating that polypeptide functionalities could be tuned directly by altering the relative amounts of amino acids in the chain. This work presents the first step toward an improved understanding and control over polypeptide conformation through modulating the amino acid composition of the material. Understanding this sequence-functionality relationship is essential to advancing the use of ROP as a technique to design smart polypeptide based materials with specific functions. © 2016 The Authors. Journal of Polymer Science Part A: Polymer Chemistry Published by Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016, 54, 2331-2336 [ABSTRACT FROM AUTHOR]

We demonstrate, theoretically and experimentally, that a four-wave mixing parametric interaction is able to arrest the collapse of a two-dimensional multicolor beam in an instantaneous Kerr medium. We consider two weak idlers interacting via a third order nonlinearity with two pump beams and we show that a class of collapse-free quasisolitary solutions can be experimentally observed in a normal dispersion Kerr glass. This observation is sustained by rigorous theoretical analysis demonstrating the stability of the observed self-trapped beams. [ABSTRACT FROM AUTHOR]

The recent introduction of coherent optical communications has created a compelling need for ultrafast phase-sensitive measurement techniques operating at milliwatt peak power levels and in timescales ranging from sub-picoseconds to nanoseconds. Previous reports of ultrafast optical signal measurements in integrated platforms include time-lens temporal imaging on a silicon chip and waveguide-based frequency-resolved optical gating (FROG). Time-lens imaging is phase-insensitive, and waveguide-based FROG methods require the integration of long tunable delay lines, which is still an unsolved challenge. Here, we report a device capable of characterizing both the amplitude and phase of ultrafast optical pulses with the aid of a synchronized incoherently related clock pulse. It is based on a novel variation of spectral phase interferometry for direct electric-field reconstruction (SPIDER) that exploits degenerate four-wave mixing in a CMOS-compatible chip. We measure pulses with a peak power of <100 mW, a frequency bandwidth of >1 THz, and up to 100 ps pulsewidths, yielding a time-bandwidth product of >100. [ABSTRACT FROM AUTHOR]

We report on light-induced optical tuning of colloidal photonic crystals doped with gold nanoparticles (Au-nps). By resonantly exciting the Au-np surface plasmon absorption with picosecond pulses at 0.53 μm in a standard pump-probe setup, we observed permanent changes in the stop band resonance around 1.7 μm, with blue wavelength shifts as large as 30 nm and associated to a nanoparticle reshaping. Fine tuning was achieved by controlling either the pulse energy or the irradiation time. [ABSTRACT FROM AUTHOR]

The reorientational nonlinearity of nematic liquid crystals enables a self-localized spatial soliton and its waveguide to be deflected or destroyed by a control beam propagating across the cell. We demonstrate a simple all-optical readdressing scheme by exploiting the lens-like perturbation induced by an external beam on both a nematicon and a copolarized guided signal of different wavelength. Angular steering as large as 2.2 deg was obtained for control powers as low as 32 mW in the near infrared. [ABSTRACT FROM AUTHOR]

Metasurfaces represent a new frontier in materials science paving for unprecedented methods of controlling electromagnetic waves, with a range of applications spanning from sensing to imaging and communications. For pulsed terahertz (THz) generation, metasurfaces offer a gateway to tuneable thin emitters that can be utilized for large‐area imaging, microscopy, and spectroscopy. In literature, THz‐emitting metasurfaces generally exhibit high absorption, being based either on metals or on semiconductors excited in highly resonant regimes. Here, the use of a fully dielectric semiconductor exploiting morphology‐mediated resonances and inherent quadratic nonlinear response is proposed. This system exhibits a remarkable 40‐fold efficiency enhancement compared to the unpatterned at the peak of the optimized wavelength range, demonstrating its potential as a scalable emitter design. [ABSTRACT FROM AUTHOR]

Laser cavity-solitons can appear in a microresonator-filtered laser when judiciously balancing the slow nonlinearities of the system. Under certain conditions, such optical states can be made to self-emerge and recover spontaneously, and the understanding of their robustness is critical for practical applications. Here, we study the formation of a bonded state comprising a soliton and a blue-detuned continuous wave, whose coexistence is mediated by dispersion in the nonlinear refractive index. Our real-time dispersive Fourier transform measurements, supported by comprehensive theoretical analysis, reveal the presence of an elastic bonding between the two states, resulting in an enhancement of the soliton's robustness. Cavity-solitons in microresonator-filtered fibre lasers are robust states with self-recovery capabilities that emerge when a delicate balance of energy-dependent nonlinearities is achieved. In this work, the authors make use of the dispersive Fourier transform to understand the dynamics leading to a soliton bonded with a quasi-continuous wave. [ABSTRACT FROM AUTHOR]

The strive for efficiency in the generation of terahertz (THz) waves motivates intense research on novel field–matter interactions. Presently, THz generation via quadratic crystals remains the benchmark thanks to its simple and practical deployment. An interesting problem is whether new mechanisms can be exploited to elicit novel generation approaches and forms of control on the THz output in existing systems. THz generation via quantum interference (QI) leverages a third‐order nonlinear response under resonant absorption, and it has been recently explored to access surface generation in centrosymmetric systems. Its deployment in standard THz quadratic sources can potentially create a physical setting with the concurrence of two different mechanisms. Here, THz generation via QI in noncentrosymmetric crystals concurrent with phase‐matched quadratic generation in a bulk‐transmission setting is demonstrated. Beyond investigating a new physical setting, it is demonstrated that conversion efficiencies much larger than those typically associated with the medium become accessible for a typically adopted crystal, ZnTe. An inherent control on the relative amplitude and sign of the two generated THz components is also achieved. This approach provides disruptive boost and management of the optical‐to‐THz conversion performance of a well‐established technology, with significant ramifications in emerging spectroscopy and imaging applications. [ABSTRACT FROM AUTHOR]

Laser cavity-solitons can appear in systems comprised of a nonlinear microcavity nested within an amplifying fiber loop. These states are robust and self-emergent and constitute an attractive class of solitons that are highly suitable for microcomb generation. Here, we present a detailed study of the free-running stability properties of the carrier frequency and repetition rate of single solitons, which are the most suitable states for developing robust ultrafast and high repetition rate comb sources. We achieve free-running fractional stability on both optical carrier and repetition rate (i.e., 48.9 GHz) frequencies on the order of 1 0 − 9 for a 1 s gate time. The repetition rate results compare well with the performance of state-of-the-art (externally driven) microcomb sources, and the carrier frequency stability is in the range of performance typical of modern free-running fiber lasers. Finally, we show that these quantities can be controlled by modulating the laser pump current and the cavity length, providing a path for active locking and long-term stabilization. [ABSTRACT FROM AUTHOR]

Second-harmonic generation is investigated in lithium niobate channels realized by proton exchange and quasi-phase matched by surface periodic poling. The reduction in conversion efficiency at high powers is interpreted in terms of multiphoton absorption via two-color terms, yielding an estimate of the dominating three-photon process. [ABSTRACT FROM AUTHOR]

The use of dasatinib and nilotinib in the treatment of patients with chronic myeloid leukemia represents a valid therapeutic option for patients resistant or intolerant to imatinib. In this multicentre study, adherence, persistence and efficacy in real life over two years of treatment were evaluated. Adherence to treatment was calculated as the ratio between the dose received and the prescribed dose. The dose received was calculated using pharmacy refill data. The persistence with treatment was calculated as the difference between the end and the beginning of the treatment. Efficacy was assigned as Progression-Free Survival (PFS) and Events-Free Survival (EFS) and represented through the Kaplan-Meier curve. The number of patients analysed was 117, 70 treated with dasatinib and 47 with nilotinib. Adherence to treatment for dasatinib and nilotinib at two years was 0.91 and 0.82 respectively. Persistence at two years was 77% while the PFS was 92% for both drugs in the study. Adherence to the treatment calculated over two years showed a superiority of dasatinib over nilotinib. Nevertheless, the efficacy in terms of PFS and EFS is superimposable between the two drugs in the study. [ABSTRACT FROM AUTHOR]

We demonstrate ultraviolet generation in lithium tantalate channel waveguides for frequency doubling via quasi-phase-matching. The samples, proton exchanged and nanostructured by electric-field assisted surface periodic poling with domains as deep as 40 μm, yield continuous wave light at 365.4 nm with conversion efficiencies larger than 7.5% W-1 cm-2. [ABSTRACT FROM AUTHOR]

We report the characterization of a balanced ultrafast photodetector. For this purpose, we use a recently developed time-domain laser-based vector network analyzer (VNA) to determine the common-mode rejection ratio (CMRR) of the device under test. This includes the frequency-domain response above the single-mode frequency of the coaxial connector. Although the balanced photodetector has a nominal bandwidth of 43 GHz, it generates voltage pulses with frequency components up to 180 GHz. We obtain a CMRR of better than 30 dB up to 70 GHz and better than 20 dB up to 110 GHz. The laserbased measurements are compared with the measurements using a digital sampling oscilloscope and with the frequency-domain measurements using a conventional VNA. We obtain good agreement between the three techniques with the laser-based method providing the largest measurement bandwidth, although it also constitutes the most complicated characterization setup. [ABSTRACT FROM AUTHOR]

Two-color terahertz (THz) generation is a field-matter process combining an optical pulse and its second harmonic. Its application in condensed matter is challenged by the lack of phase matching among multiple interacting fields. Here, we demonstrate phase-matching-free two-color THz conversion in condensed matter by introducing a highly resonant absorptive system. The generation is driven by a third-order nonlinear interaction localized at the surface of a narrow-band-gap semiconductor, and depends directly on the relative phase between the two colors. We show how to isolate the third-order effect among other competitive THz-emitting surface mechanisms, exposing the general features of the two-color process. [ABSTRACT FROM AUTHOR]

Terahertz technologies recently emerged as outstanding candidates for a variety of applications in such sectors as security, biomedical, pharmaceutical, aero spatial, etc. Imaging the terahertz field, however, still remains a challenge, particularly when sub-wavelength resolutions are involved. Here we demonstrate an all-optical technique for the terahertz near-field imaging directly at the source plane. A thin layer (<100 nm-thickness) of photo carriers is induced on the surface of the terahertz generation crystal, which acts as an all-optical, virtual blade for terahertz near-field imaging via a knife-edge technique. Remarkably, and in spite of the fact that the proposed approach does not require any mechanical probe, such as tips or apertures, we are able to demonstrate the imaging of a terahertz source with deeply sub-wavelength features (<30 μm) directly in its emission plane. [ABSTRACT FROM AUTHOR]

Ultrafast laser processing applications need fast approaches to assess the nonlinear propagation of the laser beam in order to predict the optimal range of processing parameters in a wide variety of cases. We develop here a method based on the simple monitoring of the nonlinear beam shaping against numerical prediction. The numerical code solves the nonlinear Schrödinger equation with nonlinear absorption under simplified conditions by employing a state-of-the art computationally efficient approach. By comparing with experimental results we can rapidly estimate the nonlinear refractive index and nonlinear absorption coefficients of the material. The validity of this approach has been tested in a variety of experiments where nonlinearities play a key role, like spatial soliton shaping or fs-laser waveguide writing. The approach provides excellent results for propagated power densities for which free carrier generation effects can be neglected. Above such a threshold, the peculiarities of the nonlinear propagation of elliptical beams enable acquiring an instantaneous picture of the deposition of energy inside the material realistic enough to estimate the effective nonlinear refractive index and nonlinear absorption coefficients that can be used for predicting the spatial distribution of energy deposition inside the material and controlling the beam in the writing process. [ABSTRACT FROM AUTHOR]