Search

The aim was to evaluate the antibacterial efficacy and penetration depth into dentinal tubules of a solution of chitosan nanodroplets (NDs) loaded with Benzalkonium Chloride (BAK). Seventy-two human single-root teeth with fully formed apex were used. Cylindrical root dentin blocks were longitudinally sectioned and enlarged to a size of a Gates Glidden drill #4. After sterilization, root canals were infected with Enterococcus faecalis ATCC 29212 and further incubated for three weeks. Specimens were assigned to three experimental groups (n = 20), plus positive (n = 6) and negative (n = 6) controls. In the first group, irrigation was achieved with 2 mL of NDs solution loaded with BAK (NDs-BAK), in the second with 2 mL of 5% sodium hypochlorite (NaOCl) and in the last with 2 mL of 2% chlorhexidine (CHX). Specimens were rinsed and vertically fractured. Confocal laser scanning microscopy (CLSM) and viability staining were used to analyze the proportions of dead and live bacteria quantitatively. The volume ratio of red fluorescence (dead) was calculated in 3D reconstructions. Data were analyzed by one-way ANOVA and post hoc Bonferroni tests (p < 0.05). The ratio of red fluorescence over the whole green/red fluorescence resulted in a significant comparison of NDs-BAK with NaOCl (p < 0.01) and NaOCl with CHX (p < 0.01). No differences were found between NDs-BAK and CHX (p > 0.05). The mean depth of efficacy was, respectively: NDs-BAK 325.25 μm, NaOCl 273.36 μm and CHX 246.78 μm with no statistical differences between groups. The NaOCl solution showed the highest antimicrobial efficacy, but nanodroplets with BAK seemed to have the same effect as CHX with a high depth of efficacy. [ABSTRACT FROM AUTHOR]

The sealing ability of gutta-percha/sealer root canal filing was compared to a new thermoplastic synthetic polymer-based obturation material (Resilon™), using a microleakage model and a new sequence detection assay One Cut Event AmplificatioN (OCEAN™). Eighty-eight extracted human teeth, shaped with K-Files and the ProTaper Technique, were randomly assigned to four groups (n = 22) and obturated in the apical 5 mm. Group R were obturated with the Resilon/Epiphany technique; group GP were obturated with gutta-percha and Zinc oxide eugenoe sealer; group RCH and GPCH received calcium hydroxide intracanal medication before being obturated. Sterilized specimens were inoculated with Enterococcus faecalis and incubated in sterile medium for 47 days. DNA extracted from the specimens was amplified by PCR and then identified by the OCEAN technique. Samples obturated with Resilon root canal filling material showed a greater number of microleakage events than the other groups (p = 0.036). Calcium hydroxide medication did not have a relevant impact on the quality of the apical seal (p = 0.044). [ABSTRACT FROM AUTHOR]

The aim of this study was to evaluate the ability of a PIPS (photon-induced photoacoustic streaming) Er:YAG laser to reduce the root canal system bacterial count in vivo in comparison to the traditional irrigation technique. The post-operative patients' quality of life (QoL) after endodontic therapy was evaluated through a questionnaire. Fifty-four patients affected by pulp necrosis with or without apical periodontitis biofilm disease were selected for endodontic treatment and randomly assigned to Group A (n = 27) with traditional irrigation and Group B (n = 27), with PIPS irrigation applied according to the protocol. Shaping was performed with ProGlider and ProTaper Next, and irrigation was performed with 5% NaOCl and 10% EDTA. Intracanal samples for culture tests were collected before and after irrigation. The microbiological analysis was evaluated by the Kolmogorov–Smirnov normality and Mann–Whitney tests (p < 0.05). A self-assessment questionnaire was used to evaluate the QoL during the 7 days after treatment; differences were analysed with Student's t-test. Irrigation with the PIPS device was significantly effective in reducing bacterial counts, which were higher for facultative than obligate anaerobic strains, particularly for Gram-negative bacteria, without statistical significance (p > 0.05). There were no significant differences among the QoL indicators, except for the maximum pain (p = 0.02), eating difficulty (p = 0.03) and difficulty performing daily functions (p = 0.02) in the first few days post-treatment. PIPS may represent an aid to root canal disinfection not affecting the patients' QoL, particularly for the first day after treatment. [ABSTRACT FROM AUTHOR]

Aim: To evaluate the indication of the endodontic treatment for vital intact teeth with the root apex involved in large radicular cystic lesions of endodontic origin. Methodology: This prospective cohort study enrolled healthy participants with radicular cysts of endodontic origin and with the root apex of vital intact teeth involved in the bone defect, as determined by cone beam computed tomography (CBCT). Thirty‐two sound vital teeth were analysed by thermal (TPT) and electric pulp tests (EPT) before surgery (T0) and 1 week (T1), 2 weeks (T2), 3 months (T3) and 6 months (T4) post‐surgery. Student's t‐test (p <.05) was used to compare the EPT values at baseline and T4. anova (p <.05) was used to analyse the EPT variations for all maxillary and mandibular teeth. McNemar test (p <.05) was used to compare the results according to variation in EPT values gathering by variation, no variation and no response. Results: At T1, 75 and 65.7% of teeth responded positively whilst 25 and 34.3% did not respond to EPT and TPT, respectively. The variation of the EPT values between T0 and T1 was observed for 50.0% of teeth, whilst no variation was noticed in 25.0% of teeth. At T4, 90.6 and 87.5% of teeth responded positively whilst 9.4 and 12.5% did not respond to EPT and TPT, respectively. At T4, variation of the EPT values between T0 and T4 was observed for 28.1%, whilst no variation was noticed in 62.5% of teeth. There were no statistical differences in EPT results between T0 and T4 (p >.05), but significant differences were observed for EPT values between T1 and T4 (p <.05), and between mandibular and maxillary teeth. The pulp sensibility of maxillary teeth worsened after surgery, before reverting progressively to T0 values, whilst no statistically significant differences were observed for mandibular teeth at the different time points. Conclusions: These data support the inconsistence of the prophylactic endodontic treatment in healthy vital teeth with apex involvement in large cystic lesions of endodontic origin. Post‐surgery follow‐up with TPT and EPT is recommended to assess pulp status. [ABSTRACT FROM AUTHOR]

(1) Background: The objective of this in vitro study was to evaluate the impact of different etching times and ethanol pre-treatments on the immediate bond strength of a hydrophilic multi-mode universal adhesive (Clearfil Universal Bond Quick, Kuraray, UBQ) and on the consequent gelatinolytic activity of metalloproteinases (MMPs) on radicular dentin. (2) Methods: Sixty single-root teeth were selected and divided into four groups according to the adhesive protocol applied for fiber post cementation: (G1) 15 s H3PO4 application + UBQ; (G2) 30 s H3PO4 application + UBQ; (G3) 15 s H3PO4 application + ethanol pre-treatment + UBQ; (G4) 30 s H3PO4 + ethanol pre-treatment + UBQ. After adhesive procedures, fiber posts were luted into the post space with a dual-curing cement (DC Core, Kuraray) and light-cured for 40 s. To perform the push-out test and nanoleakage analyses for both coronal end apical areas, 1 mm slices were prepared, following a 24 h storage period in artificial saliva. Additionally, an in situ zymographic assay was conducted to explore endogenous MMP activity within the radicular layer. Results were statistically analyzed with ANOVA and Tukey post hoc tests. Statistical significance was set at p < 0.05. (3) Result: ANOVA revealed a statistically significant difference in push-out bond strength related to the pre-treatment variable but did not highlight any significance of etching time. Specimens pre-treated with ethanol wet bond application showed higher bond strength (p < 0.01). In situ zymography quantification analyses revealed that all tested groups, independently of etching time end ethanol pre-treatment, activated MMP gelatinolytic activity. A significant increase in MMP activity was detected for the 30 s etching time. However, ETOH pre-treatment significantly reduced MMP activity within the adhesive interface (p < 0.01). (4) Conclusions: The tested adhesive showed similar results regardless of the etching time protocol. The gelatinolytic activity of MMPs was observed in all the groups. Further investigations and extended follow-ups are required to validate the results of the present study in vivo. [ABSTRACT FROM AUTHOR]

Introduction Methods Results Conclusion Computer simulations are stimulating increased attention in dentistry. Augmented reality superimposes a virtual scenario over an existing reality and allows interaction with it. Virtual reality (VR) simulates a fully immersive situation permitting the user to experience the full environment in real time. Haptic technology provides tactile and realistic force feedback for the user to experience the immersive situation as if they were really there. Preclinical training is important to gain familiarity with difficult surgical techniques and to implement interpersonal skills. Developing a valid assessment of surgical simulation is challenging.This paper wants to present a newly realized VR simulation in endodontic microsurgery through the developmental digital workflow, the demonstration of a haptic VR scenario and student self‐assessment and self‐reflection feedback.The volumes were exported in a stereolithography format to prepare and optimize in terms of shape and shade for the VR simulation. The graphics and touchable haptic solid were created using Virteasy Editor, which allows the transformation of 3D surfaces into graphical and volumetric haptic solids depending on their material (enamel, dentine, pulp and bone).Users were asked to execute the osteotomy and root‐resection preparation. The assessment criteria were determined, and the feedback statements were created by a questionnaire with fixed answers. Objective and qualitative criteria for assessing the preparation were obtained from the literature.This study provides proof that it is possible to provide reliable and clinically relevant qualitative feedback with a VR simulator.VR simulation offers an innovative approach with all the benefits of clinical experience. It permits you to save your own progress and review the assessment at any time. [ABSTRACT FROM AUTHOR]

(1) Background: A Dynamic Navigation System (DNS) is an innovative tool that facilitates the management of complex endodontic cases. Despite the number of advantages and limitations of this approach, there is no evidence-based information about its efficiency in comparison with that of the traditional method in endodontics. (2) Objectives: We aimed to explore any beneficial effects of the DNS and compare the outcomes of DNS vs. free-hand (FH) approaches for non-surgical and microsurgical endodontics. (3) Methods: A literature search was conducted in August 2023 to identify randomized, experimental, non-surgical, and microsurgical endodontic studies that compared the DNS with FH approaches. The procedural time (ΔT, s), substance loss (ΔV, mm3), angular deviation (ΔAD, °), coronal/platform linear deviation (ΔLD_C, mm), and apical linear deviation (ΔLD_A, mm) were recorded and analyzed. Quality and risk of bias assessments were conducted according to the Quality Assessment Tool For In Vitro Studies. A meta-analysis was performed using mean difference and standard deviation for each outcome, and heterogeneity (I2) was estimated. p < 0.05 was considered significant. (4) Results: One-hundred and forty-six studies were identified following duplicate removal, and nine were included in the systematic review and meta-analysis. The overall risk of bias was classified as low. The DNS was found to be more accurate and efficient than the FH approach was, resulting in a significantly shorter operation time (p < 0.00001) and less angular (p ≤ 0.0001) and linear deviation (p ≤ 0.01). For substance loss, the advantage of the DNS was significant only for microsurgery (p = 0.65, and p < 0.005, for non-surgical and microsurgical procedures, respectively). A reduced risk of iatrogenic failure using the DNS was observed for both expert and novice operators. (5) Conclusions: The DNS appears beneficial for non-surgical and microsurgical endodontics, regardless of the operator's experience. However, appropriate training and experience are necessary to access the full advantages offered by the DNS. [ABSTRACT FROM AUTHOR]

The aim of this study was to compare the shaping ability of a modified ProTaper Next technique (PTNm) with that of TruNatomy (TN) in lower molars mesial curved canals using micro-computed tomography (Micro-CT). Sixty mesial canals of first mandibular molars were randomly assigned between two groups (n = 30). After canal scouting with K-File #10, glide path and shaping were carried out with TN or PTNm systems. The PTNm sequence consists of ProGlider, followed by ProTaper Next X1 and apical finishing with NiTiFlex #25 up to working length (WL) to ensure adequate apical cleaning. Samples were scanned using micro-CT and pre- and post-shaping volumes were matched to analyse geometric parameters: the volume of removed dentin; the difference of canal surface; centroid shift, minimum and maximum root canal diameters; cross-sectional areas; the ratio of diameter ratios (RDR) and the ratio of cross-sectional areas (RA). Measurements were assessed 2 mm from the apex and in relation to the middle and coronal root canal thirds. Data were analysed using ANOVA (p < 0.05). No statistically significant differences were found between the groups for any parameter at each level of analysis, except for RA at the coronal level (p = 0.037). The PTNm system showed the tendency to enlarge more in the coronal portion with a lower centroid shift at apical level compared with TN sequence (p > 0.05). Both PTNm and TN sequences demonstrated similar maintenance of original anatomy during the shaping of lower molar mesial curved canals. [ABSTRACT FROM AUTHOR]

To evaluate shear stress (SS) and normal pressure (NP) at the tooth-restoration interface of highly-filled flowable resin composite applied to deep margin elevation technique through FEM analysis generated by a microCT scan. A reference maxillary molar with two class II cavities was prepared according to deep margin elevation protocol. A geometrical model was segmented from a micro-CT scan generating separate volumes of enamel, dentin and restorative materials. The 3D Finite Element (FE) model was subsequently built-up and an axial chewing load was simulated. Data concerning the tooth-restoration interface were analyzed in terms of SS and NP. Different materials and techniques were tested in order to evaluate the effects of the restorative material, the usage of a highly-filled flowable composite as liner and the substrate of the cervical area. Both SS and NP presented similar distribution, but showed significant differences between tested materials. Composites showed more homogeneous behavior in stress distribution compared to ceramic. The use of a highly-filled flowable composite as liner on the cervical margin significantly reduced SS and NP on the cavity floor and the cervical margin area. Lastly, stress distribution in the cavity floor area varied according to the cervical margin substrate: enamel showed a protective role in stress distribution. Highly-filled flowable resin composites showed encouraging results when applied to deep margin elevation from an interfacial mechanical point of view. Further studies are needed to validate these data and to better define the role of cervical enamel in stress distribution. • Micro-CT can be used to create a realistic finite element model of the tooth-restoration complex. • Highly-filled flowable resin reduced shear and normal pressure stresses on the cavity floor. • Shear and normal pressure stresses presented similar distributions, being influenced by the different materials. • Resin-based materials showed a more homogeneous behavior in stress distribution compared to ceramic. [ABSTRACT FROM AUTHOR]

The aim of this in vitro study was evaluate the effect of application of synthetic hydroxyapatite on fiber post bond strength to radicular dentine. Forty, single-root teeth were endodontically treated and an 8 mm post space was prepared. Specimens were randomly placed in four groups ( n = 10 in each) and treated using the following fiber post luting procedures: group 1, 17% EDTA + Panavia SA; group 2, 17% EDTA + Teethmate Desensitizer + Panavia SA; group 3, All-Bond Universal + Duo-Link Universal; and group 4, All-Bond Universal + Teethmate Desensitizer + Duo-Link Universal. Fiber posts were luted in the post space and light-cured for 120 s using a light-emitting diode ( LED) lamp. After 7 d of storage at 37°C, the teeth were cut into 1-mm-thick slices, which were subjected to a push-out test until failure using a universal testing machine. Two specimens per group were prepared for scanning electron microscopy analysis. An energy-dispersive X-ray spectroscopy detector was used for elemental analysis of the specimen surface. The results were statistically analyzed using one-way anova. The fiber post bond strength was statistically significantly increased after the application of Teethmate Desensitizer to post space walls, either with a 10- MDP-containing self-adhesive cement or with a universal adhesive. Scanning electron microscopy and EDAX analysis showed that Teethmate Desensitizer created a calcium phosphate precipitate over post space dentinal tubules, which significantly improved the bond strength of the fiber post luted with 10-methacryloyloxydecyl dihydrogen phosphate (10- MDP)-containing adhesive systems. [ABSTRACT FROM AUTHOR]

The aim of this in-vitro study was to evaluate the bond strength of fiber posts cemented in a root canal filled using various root-canal obturation techniques. A total of 33 monoradicular samples, treated endodontically, were randomly assigned to three groups according to the root-canal obturation technique: group 1, continuous-wave technique; group 2, plastic-obturator-core technique; and group 3, cross-linked gutta-percha obturator-core technique. Fiber posts were luted in each sample and each was sectioned perpendicular to the post axis. The push-out test was performed using a universal machine and the maximum failure load was recorded in MPa mm−2. Several samples were randomly chosen for scanning electron microscopy evaluation. The mean debris and dentinal tubule-opening scores were calculated separately in the coronal and apical portions. Bond strength was significantly higher in group 1 than in groups 2 and 3. Debris scores were significantly higher in the apical portion of groups 2 and 3 than in group 1. Within the limitations of this study it can be affirmed that thermoplasticized alpha gutta-percha seemed to worsen the cleaning of post-space walls and hence reduced fiber-post bond strength. [ABSTRACT FROM AUTHOR]

Abstract: Objectives: The aim of this study was to investigate the influence of post placement on fracture resistance of endodontically treated mandibular molars restored with adhesive overlay restorations. Methods: Endodontically treated human molars with two- and one-wall cavities either underwent or did not undergo fibre post insertion within composite build-up before cementation of indirect composite onlay restorations. The specimens were thermocycled, exposed to cyclic loading, and submitted to the static fracture resistance test. Fracture loads and mode of failure were evaluated. Results: Statistical analysis revealed that specimens with fibre posts demonstrated similar failure loads (p =0.065) but more favourable fracture patterns compared with specimens without fibre posts. No difference was found between two- and one-wall cavities. Conclusions: Within the limitations of this study, the insertion of fibre posts did not improve support under indirect composite overlays. Clinical significance: When restoring heavily broken down endodontically treated mandibular molars with an indirect overlay composite restoration, the fibre post inserted within the composite build-up do not provide any increase in fracture resistance. [Copyright &y& Elsevier]

In endodontically treated teeth, cuspal coverage plays a fundamental role in reducing the risk of fracture. However, the adhesive techniques with or without fiber post increased the possibilities in restoring root-filled teeth. The aim of this study was to determine the effect of the fiber post and/or post length and/or cuspal coverage on the fracture resistance of endodontically treated maxillary premolars. Seventy intact single-rooted maxillary premolars were selected and divided in seven groups of ten each: 'intact teeth' (control), 'inlay without fiber post' (G1), 'inlay with long fiber post' (G2), 'inlay with short fiber post' (G3), 'onlay without fiber post' (G4), 'onlay with long fiber post' (G5), and 'onlay with short fiber post' (G6). Except for intact teeth, all specimens were prepared with a mesio-occluso-distal (MOD) cavity, endodontically treated and restored with or without long or short post, with or without cusp coverage. All specimens were thermal-cycled, exposed to a cyclic loading, and then submitted to the static fracture resistance test. Fracture loads and mode of failure were evaluated. A statistically significant difference in fracture resistance was found between group 1 and the other groups ( p < 0.001). χ2 test showed statistically significant differences in the patterns of fractures between the groups ( p < 0.001). The highest number of favorable fractures was observed in groups 3 and 4. Similar fracture resistance was detected in maxillary premolars endodontically treated with MOD cavity preparations, restored with either direct resin composite with fiber post or cusp capping. The 'short post' direct restoration may be a valid alternative in the restoration of root-filled premolars. [ABSTRACT FROM AUTHOR]

This meta-analysis aimed to evaluate postoperative pain (POP) following root canal filling (RCF) with gutta-percha/bioceramic sealer (BCS) vs. gutta-percha/traditional sealer (TS) techniques. Electronic databases were searched for randomized trials. Subgroup analyses were performed for analgesic intake, flare-ups, postoperative time (24/48 h), pulp status, and retreatment. The search yielded 682 records, and nine studies were selected. BCS was associated with significantly lower POP vs. TS at 24 h (P = 0.04) and 48 h (P = 0.0005). In addition, non-significant trends favoring BCS for analgesic intake at 24 h (P = 0.14), flare-ups (P = 0.24) and obturation techniques at 24 h (P = 0.41) and 48 h (P = 0.33), non-significant trends for lower POP with TS vs. BCS 24 h and 48 h in vital teeth (P = 0.50, P = 0.18, respectively), and for lower POP with BCS vs. TS in non-vital teeth at 24 h and 48 h (P = 0.16, P = 0.84, respectively). POP was numerically lower with TS vs. BCS at 24 h (P = 0.65) and 48 h after retreatment (P = 0.59). Moreover, POP did not vary between fillers when the treatment was over single (P = 0.28) or multiple visits (P = 0.50). BCS was associated with significantly lower short-term POP, and with a trend for lower analgesic intake and flare-up incidence, as compared to TS. [ABSTRACT FROM AUTHOR]