Search

Here, we analyzed the effect of a donor molecule (Rh6G) on the random laser emission of an acceptor molecule (Rh640 perchlorate) coated on the surface of a polymer optical fiber. Due to the energy transfer mechanism, the random lasing threshold of Rh640 perchlorate was found to be reduced in the presence of Rh6G. Also, the emission spectrum of Rh640 perchlorate was blue-shifted with the addition of Rh6G. Meanwhile, there is an enhancement in the lasing threshold of Rh6G in the presence of Rh640 perchlorate. The present study demonstrates that by properly adjusting the concentrations of both donor and acceptor molecules, we can obtain a dual-color random laser emission from polymer optical fiber. [ABSTRACT FROM AUTHOR]

In this work, a novel optical–chemical sensor for the detection of per- and polyfluorinated substances (PFASs) in a real scenario is presented. The proposed sensing approach exploits the multimode characteristics of plastic optical fibers (POFs) to achieve unconventional sensors via surface plasmon resonance (SPR) phenomena. The sensor is realized by the coupling of an SPR-POF platform with a novel chemical chip based on different polymeric nanolayers over the core of a D-shaped POF, one made up of an optical adhesive and one of a molecularly imprinted polymer (MIP) for PFAS. The chemical chip is used to launch the light into the SPR D-shaped POF platform, so the interaction between the analyte and the MIP's sites can be used to modulate the propagated light in the POFs and the SPR phenomena. Selectivity tests and dose–response curves by standard PFOA water solutions were carried out to characterize the detection range sensor response, obtaining a wide PFAS response range, from 1 ppt to 1000 ppt. Then, tests performed on river water samples collected from the Bormida river paved the way for the applicability of the proposed approach to a real scenario. [ABSTRACT FROM AUTHOR]

A new galvanic cell design of a self‐powered and 3D‐printable soft sensor showing health monitoring, object recognition, and contactless hand gesture recognition, is reported. The soft sensor consists of a 3D‐printed poly(acrylic acid) (PAA) hydrogel electrolyte layer, a soft anode layer, and a soft cathode layer. The anode layer is a 3D‐printed and Cu2+ cross‐linked poly(N,N‐dimethylacrylamide‐co‐3‐alanine‐2‐hydroxypropylmethacrylate) (PDA) hydrogel dispersed with Cu metal particles (PDA/Cu2+/Cu hydrogel), while the cathode layer is a bottom thin layer of the PAA hydrogel containing MnO2 (PAA/MnO2). Using graphite films as the soft electrodes, the soft sensor is finally assembled. The soft sensor has high force and temperature sensitivities. It gives different electric current responses under stretching, bending, pressing, and impact loading. The soft sensor is demonstrated to be useful in detecting human motion and physiological activities, e.g., breath. Based on the force and contactless temperature sensitivities, the soft sensor is used to recognize human hand gestures and plastic balls with different diameters. This 3D printable soft sensor with self‐powering, contactless motion capturing, and multi‐pimulus sensing capabilities illustrates a new pathway to make soft sensory devices for healthcare and human‐machine interaction applications. [ABSTRACT FROM AUTHOR]

2-Furaldehyde (2-FAL) is one of the main by-products of the degradation of hemicellulose, which is the solid material of the oil–paper insulating system of oil-filled transformers. For this reason, it has been suggested as a marker of the degradation of the insulating system; sensing devices for 2-FAL analysis in a wide concentration range are of high interest in these systems. An optical sensor system is proposed; this consists of a chemical chip, able to capture 2-FAL from the insulating oil, coupled with a surface plasmon resonance (SPR) probe, both realized on multimode plastic optical fibers (POFs). The SPR platform exploits gold nanofilm or, alternatively, a double layer of gold and silicon oxide to modulate the sensor sensitivity. The capturing chip is always based on the same molecularly imprinted polymer (MIP) as a receptor specific for 2-FAL. The system with the SPR probe based on a gold nanolayer had a higher sensitivity and a lower detection limit of fractions of μg L−1. Instead, the SPR probe, based on a double layer (gold and silicon oxide), has a lower sensitivity with a worse detection limit, and it is suitable for the detection of 2-FAL at concentrations of 0.01–1 mg L−1. [ABSTRACT FROM AUTHOR]

An optical fiber relative humidity (RH) sensor based on tapered no-core fiber (TNCF) coated with Ti 3 C 2 T x MXene is proposed. The fluoride etching method is used to prepare Ti 3 C 2 T x , which is used as the humidity sensitive material with a multi-layer structure, large specific surface area and rich hydrophilic groups, and optical deposition method is used to integrate Ti 3 C 2 T x with TNCF. The diameter of TNCF between two sections of SMF is reduced to 11.6 μ m to enhance RH sensitivity. The refractive index (RI) of Ti 3 C 2 T x changes as a result of variations in RH, and this ultimately causes a shift in the transmission spectrum. The sensitivity of the device is −77 pm/%RH in the range of 33 %RH to 75 %RH. In the region of 75 %RH to 91 %RH, the sensitivity increases to 685 pm/%RH, the linear correlation coefficients of the two regions are 0.9521 and 0.9940, respectively. On average, the response time is approximately 3.5 s and the recovery time is about 12.7 s. The sensor may be utilized in possible domains, including biological, chemical, and food processing. Its benefits include a simple construction, cheap cost, high reversibility, and stability. [ABSTRACT FROM AUTHOR]

AbstractA high-sensitivity temperature sensor based upon an optical fiber Fabry-Perot interferometer (FPI) filled with polydimethylsiloxane (PDMS) is reported that employed a single mode fiber (SMF) and a hollow core fiber (HCF) to enhance the sensitivity. The sensing characteristics were investigated from 20 °C to 40 °C. The experimental results demonstrate that the sensor is sensitive to temperature due to the high thermal optical coefficient (TOC) and high thermal expansion coefficient (TEC) of PDMS, achieving a high sensitivity of 2.155 nm/°C. The designed sensor shows great potential for high-precision temperature sensing applications due to its high sensitivity, compact structure, and simple preparation. [ABSTRACT FROM AUTHOR]

In this study, a polymer-based surface plasmon resonance (SPR) sensor for refractive index measurements was designed and manufactured via inkjet 3D printing; then, it was optically characterized. Next, it was investigated how the surface finish of the 3D printed optical waveguide affects the sensor performance, i.e., its sensitivity. More in detail, it was studied how the surface roughness changes with the placement of the 3D printed items on the building platform. To achieve this purpose, a Phase I distribution-free quality monitoring analysis of the selected manufacturing process was implemented for a small pilot production run. The aim was to check the stability of surface roughness versus the placement of the 3D printed parts on the building platform. The 3D printed sensor's surface roughness was assessed through a profilometry study. In particular, the surface roughness was determined for the core of the optical waveguide used to excite the SPR phenomena. Furthermore, the SPR sensors were optically characterized to find the existing relationship between their sensitivity and the considered quality of surface finish. In particular, by varying the surface roughness of the used waveguide, the light scattering in the waveguide changes, and the SPR sensitivity changes too, similarly to the light-diffusing fibers covered by gold nanofilms where the guided light is scattered through a plurality of voids distributed in the core. The procedure followed to investigate the sensor roughness, and establishing their performance enabled the optimal operative range for their application in practice to be identified. Finally, a better knowledge of the 3D printing manufacturing process has been achieved to improve quality of surface finish. [ABSTRACT FROM AUTHOR]

An optical–chemical sensor based on two modified plastic optical fibers (POFs) and a molecularly imprinted polymer (MIP) is realized and tested for the detection of 2-furaldehyde (2-FAL). The 2-FAL measurement is a scientific topic of great interest in different application fields, such as human health and life status monitoring in power transformers. The proposed sensor is realized by using two POFs as segmented waveguides (SW) coupled through a micro-trench milled between the fibers and then filled with a specific MIP for the 2-FAL detection. The experimental results show that the developed intensity-based sensor system is highly selective and sensitive to 2-FAL detection in aqueous solutions, with a limit of detection of about 0.04 mg L−1. The proposed sensing approach is simple and low-cost, and it shows performance comparable to that of plasmonic MIP-based sensors present in the literature for 2-FAL detection. [ABSTRACT FROM AUTHOR]

A highly sensitivity balloon-like fiber interferometer based on ethanol coating is presented in this paper. The Mach–Zehnder interferometer is formed by bending a single-mode fiber to a balloon-like structure and nested in the Teflon tube. Then, an ethanol solution was filled into the tube of the balloon-like fiber interferometer by the capillary effect. Due to the high sensitivity of the refractive index (RI) of ethanol solutions to temperature, when the external temperature varies, the optical path difference changes. The change in temperature can be detected by the shift in the interference spectrum. Limited by the size of the balloon-like structure, three kinds of these structures with different sensitive lengths were prepared to select the best parameters. The sensitive lengths were 10, 15 and 20 mm, respectively, and the RI detection performance of each structure in 10~26% NaCl solutions was investigated experimentally. The results show that when the sensitive length is 20 mm, the RI sensitivity of the sensor is the highest, which is 212.88 nm/RIU. Ultimately, the sensitive length filled with ethanol is 20 mm. The experimental results show that the temperature sensitivity of the structure is 1.145 nm/°C in the range of 28.1 °C~35 °C, which is 10.3 times higher than that of an unfilled balloon-like structure (0.111 nm/°C). The system has the advantages of low cost and easy fabrication, which can potentially be used in high-precision temperature monitoring processes. [ABSTRACT FROM AUTHOR]

As the global aging population increases, the demand for rehabilitation of elderly hand conditions has attracted increased attention in the field of wearable sensors. Owing to their distinctive anti-electromagnetic interference properties, high sensitivity, and excellent biocompatibility, optical fiber sensors exhibit substantial potential for applications in monitoring finger movements, physiological parameters, and tactile responses during rehabilitation. This review provides a brief introduction to the principles and technologies of various fiber sensors, including the Fiber Bragg Grating sensor, self-luminescent stretchable optical fiber sensor, and optic fiber Fabry–Perot sensor. In addition, specific applications are discussed within the rehabilitation field. Furthermore, challenges inherent to current optical fiber sensing technology, such as enhancing the sensitivity and flexibility of the sensors, reducing their cost, and refining system integration, are also addressed. Due to technological developments and greater efforts by researchers, it is likely that wearable optical fiber sensors will become commercially available and extensively utilized for rehabilitation. [ABSTRACT FROM AUTHOR]

In order to solve the problem of flexible sliding tactile composite sensing in the actual grasp of intelligent robot fingers, this paper proposes a research on a convex fiber grating tactile sliding sensor based on mechanical fingers. Based on the sensing principle of fiber Bragg grating, 3D printing technology was used to encapsulate the FBG sensor array with elastic 50 A resin, a double-layer "hemispherical cuboid" distributed sensing unit was designed, and the FBG slippery tactile sensor was actually pasted on the surface of the mechanical finger for static and dynamic experiments. The experimental results show that the slippery tactile sensor designed in this paper has a good linear relationship with temperature and strain. The temperature sensitivities of the polymer-packaged FBGs are K T 1 = 13.04 pm/°C and K T 2 = 12.91 pm/°C, and they have a pressure sensitivity of 40.4 pm/N and 31.2 pm/N, respectively. The FBG sliding tactile sensor not only realizes the identification of the sliding signal generation point and the end point but also completes the classification and identification of sandpaper, cardboard, and polypropylene plastic, and it has a high degree of fit with the robot finger, which has certain application value for the intelligent robot sliding tactile signal perception. [ABSTRACT FROM AUTHOR]

In this research, we proposed and numerically investigated a D-shaped dual-core photonic crystal fiber (PCF) refractive index (RI) sensor based on surface plasmon resonance (SPR), and a plasma material indium tin oxide (ITO) is deposited on the polished surface of a D-shaped PCF to produce the SPR effect. The proposed PCF sensor incorporates a dual-core structure and innovatively introduces an elliptical air hole, which increases the coupling of the SPR effect, resulting in a notable improvement in sensor performance. This enhancement enables the sensor to efficiently detect variations in the RI of the analyte. Utilizing the finite element method (FEM), we analyzed the influencing characteristics of sensor performance, meticulously investigating and optimizing various structural parameters. In the RI sensing range spanning from 1.18 to 1.33, the designed PCF sensor exhibits an outstanding maximum wavelength sensitivity of 29,300 nm/RIU, along with the highest achievable amplitude sensitivity of 261.01 RIU−1. Upon analyzing the light signal modulated by the sensor, the findings unequivocally demonstrate that the proposed sensor displays outstanding sensitivity to changes in the analyte's RI via the SPR effect. This responsiveness enables effective and precise real-time detection. The proposed sensor is characterized by exceptional sensing performance, strong economic feasibility, and low manufacturing intricacy. Consequently, the proposed sensor can be used to detect medical oxygen, anesthetics, methane gas, glucose, fluorine-containing organics, etc., and it holds a diverse array of promising applications spanning industrial detection, biochemical analysis, and medical diagnostics. [ABSTRACT FROM AUTHOR]

In this paper, we propose and numerically characterize the optical characteristics of a dual eccentric-core D-shaped photonic crystal fiber (PCF) surface plasmon resonance (SPR) refractive index (RI) sensor. The dual eccentric-core structure can leak more power to plasma film to excite SPR phenomenon than conventional structures. We investigate the influences induce by diameter of air holes, distance between air holes and thickness of gold film. The results show that our sensor has the wavelength sensitivities (WS) of 44,000 nm/RIU for odd mode and 39,000 nm/RIU for even mode. Moreover, the sensor has the detection range of RI from 1.00 to 1.37, the maximum figure-of-merit (FOM) of 325/RIU, maximum resolution of 2.27 × 10−6 RIU for analyte RI change of 0.1 nm, and the minimum full-width at half-maximum (FWHM) of 56 nm. The sensor has wide application prospects in methane, blood plasma, and methanol detecting. [ABSTRACT FROM AUTHOR]

An ultrahigh sensitivity surface plasmon resonance sensor based on double-side polished photonic crystal fiber is designed, and the gold film with a zigzag cross section is used as the plasmonic material. We study the refractive index sensing characteristics of the proposed sensor by numerical simulation. The results show that compared with the flat gold film structure, the zigzag gold film structure effectively improves the sensing performance, and the sensitivity and resolution of the sensor are significantly enhanced. The maximum wavelength sensitivity and resolution of the proposed sensor can reach 20,000 nm/RIU and 5.00 × 10−6 RIU, respectively. The working wavelength range of the sensor is between 590 and 1200 nm, and the refractive index range that can be used for detection is 1.350 RIU-1.400 RIU. This can be applied to precise detection of extracellular vesicles, breast cancer cell, and red blood cells. The proposed sensor has significant advantages such as stable structure, ultrahigh sensitivity, fast response, small size, and saving noble metal. It has great application potential in biomedical testing and medical equipment. [ABSTRACT FROM AUTHOR]

A highly sensitive D-shaped microfluidic channel (MFC) incorporated in a single-mode fiber (SMF) equipped with a tungsten trioxide ( W O 3 ) layer coated with gold (Au) or silver (Ag) on the base of the MFC is designed and investigated utilizing a finite element method (FEM) to obtain the sensing performance of the optical fiber surface plasmon resonance (SPR) structure. The proposed sensor is appropriate for both bimetallic layers and analytes. With the sizeable cladding diameter of SMF, the fluidic channel size can be changed following demand, making fabrication more accessible and applicable. The hollow D-section above the core deposited a bimetallic structure of silver (Ag) or gold (Au) as plasmonic materials, followed by a tungsten trioxide ( W O 3 ) nanolayer. This optical fiber biochemical monitors the changes in the refractive index (RI) by measuring the transmission spectral shifts of the fiber at their resonance wavelengths. The W O 3 layer protects the plasmonic material from oxidation and effectively enhances the surface plasmon wave (SPW) while interacting with free electrons. Upon achieving the optimum structural parameters, the numerical investigation results showed that the maximum wavelength sensitivity of 6.0 μ m//RIU and 5.0 μ m//RIU for Au/ W O 3 and Ag/ W O 3 were obtained, with the coefficient of performance of 50.12 R I U - 1 and 134.84 R I U - 1 , respectively, for ultra-wide sensing ranges from 1.28 to 1.38. Also, the simulation outcomes revealed that the tungsten trioxide-coated with Ag or Au layers significantly enhanced the sensor. Finally, the numerical results of this study showed that the proposed sensor has substantial possibilities for large sensing RI applications such as biology and chemistry analytes, and it is also valid for other lower RI analyte sensing requirements as a consequence of its features such as high sensitivity, simple design, cost-effective design, and promising linear sensing performance. [ABSTRACT FROM AUTHOR]

In this paper, a new sensor is proposed to efficiently gather crucial information on corrosion phenomena and their progression within steel components. Fabricated with plastic optical fibers (POF), the sensor can detect corrosion-induced physical changes in the appearance of monitoring points within the steel material. Additionally, the new sensor incorporates an innovative structure that efficiently utilizes bi-directional optical transmission in the POF, simplifying the installation procedure and reducing the total cost of the POF cables by as much as 50% when monitoring multiple points. Furthermore, an extremely compact dummy sensor with the length of 5 mm and a diameter of 2.2 mm for corrosion-depth detection was introduced, and its functionality was validated through experiments. This paper outlines the concept and fundamental structure of the proposed sensor; analyzes the results of various experiments; and discusses its effectiveness, prospects, and economic advantages. [ABSTRACT FROM AUTHOR]

To measure vibration signals, a low-frequency fiber Bragg grating (FBG) acceleration sensor featuring a flexible hinge with a spring support and symmetric compensation structure has been designed. Based on the mechanical model of the sensor's structure, the expressions for sensitivity and resonant frequency of the sensor are derived. The structural parameters of the sensor are optimized, and a simulation analysis is conducted using ANSYS 19.2 software. According to the results of simulation analysis and size optimization, the sensor prototype is constructed. Subsequently, its amplitude-frequency response, sensitivity, and temperature characteristics are investigated through vibration experiments. The experimental results show that the resonant frequency of the sensor is 73 Hz, the operating frequency range is 0~60 Hz, and the sensitivity measures 24.24 pm/g. This design meets the requirements for measuring vibration signals at low frequencies. [ABSTRACT FROM AUTHOR]

This article presents a technique for reducing the stabilization length of steady-state modes in step-index plastic optical fibers (POFs), which is significant for sensor networks, Internet of Things, signal processing, and data fusion in sensor systems. The results obtained with the com- putational tool developed suggest that the D-shape created in the POF effectively reduces the stabi- lization length of the modes and, by extension, minimizes the dispersion effects of the modes by filtering out high-order modes. Applying the analysis to commercial POFs, the authors experimen- tally verified a reduction in the stabilization length of modes from 27 to 10 m and from 20 m to 5 m. Reducing the mode stabilization length minimizes the bit error rate (BER) in short-length SI-POF- based optical links operating at 250 Mbp/s. A reduction from 7.6 × 10−7 to 3.7 × 10−10 was achieved. [ABSTRACT FROM AUTHOR]

Recently, Subwavelength Grating Waveguides (SWG WG) attract a lot of attention for sensing applications because it offers better sensitivity than conventional WGs. The sensitivity of SWG WG is greatly improved due to the interaction between the analyte and guiding mode in the SWG segments. In this study, a highly sensitive sensor based on a silicon SWG slot waveguide (SWGSW) is proposed for detecting low-concentration fluoride contaminations in water. The gap called as "slot" between the silicon slab along with cladding and the spaces between the segmented silicon rail waveguide is filled with fluoride ion-contaminated water samples as analyte for strong light–matter interaction between guiding modes of the SWG structure, resulting in greater sensitivity of the proposed sensor. The sensitivity of the proposed structure is estimated by numerical simulations as S = 615.38 nm/RIU which is comparable to the existing reported optical sensor structures based on optical waveguide and optical fibre with a smaller footprint. Additionally, the effect of variation of geometrical parameters on the transmission resonances of the proposed structure is also analyzed for the optimization of a SWG WG structure. The obtained results will be helpful to realize and design highly sensitive sensors based on the SOI platform. [ABSTRACT FROM AUTHOR]

For accurate bio-sample identification, we present a unique optimized surface plasmon resonance sensor based on an X-shaped exposed-core photonic crystal fiber. Applications are made easier by the placement of the target analyte and plasmonic material on the fiber's exterior surface. The sensor has four separate silica channels that reach from the core to the metallic outer surface creating X-shape. These channels were intentionally placed to provide the highest sensitivity while maintaining the sensor's ability to be manufactured. Within a refractive index range of 1.33 to 1.40, our optimized sensor demonstrates improved detecting abilities, including a wavelength sensitivity of 8000 nm/RIU and amplitude sensitivity of - 1175.12 R I U - 1 . The suggested sensor also exhibits exceptional performance parameters, such as a resolution of 1.25 × 10 - 5 , a maximum signal-to-noise ratio (SNR) of 2.041 dB, a figure of merit (FOM) of 160.0 R I U - 1 , a detection accuracy (DA) of 0.02 nm−1, and minimum full width half maxima (FWHM) of 50 nm. When examining variations in the optical properties of the PCF due to different RIs of normal and cancer cells using finite element analysis, we achieve amplitude sensitivities of - 844.91, - 418 and - 1221.8 R I U - 1 for HeLa, Basal and MDA-MB-231 cell lines, respectively. [ABSTRACT FROM AUTHOR]

To investigate the therapeutic potential of photodynamic therapy (PDT) for malignant gliomas arising in unresectable sites, we investigated the effect of tumor tissue damage by interstitial PDT (i-PDT) using talaporfin sodium (TPS) in a mouse glioma model in which C6 glioma cells were implanted subcutaneously. A kinetic study of TPS demonstrated that a dose of 10 mg/kg and 90 min after administration was appropriate dose and timing for i-PDT. Performing i-PDT using a small-diameter plastic optical fiber demonstrated that an irradiation energy density of 100 J/cm2 or higher was required to achieve therapeutic effects over the entire tumor tissue. The tissue damage induced apoptosis in the area close to the light source, whereas vascular effects, such as fibrin thrombus formation occurred in the area slightly distant from the light source. Furthermore, when irradiating at the same energy density, irradiation at a lower power density for a longer period of time was more effective than irradiation at a higher power density for a shorter time. When performing i-PDT, it is important to consider the rate of delivery of the irradiation light into the tumor tissue and to set irradiation conditions that achieve an optimal balance between cytotoxic and vascular effects. [ABSTRACT FROM AUTHOR]

A novel photonic crystal fiber (PCF) sensor for refractive index detection based on polydimethylsiloxane (PDMS) is presented in this research, as well as designs for single-channel and dual-channel structures for this PDMS-PCF sensor. The proposed structures can be used to develop sensors with biocompatible polymers. The performance of the single-channel PDMS-PCF sensor was studied, and it was found that adjusting parameters such as pore diameter, lattice constant, distance between the D-shaped structure and the fiber core, and the radius of gold nanoparticles can optimize the sensor's performance. The findings indicate that the detection range of the single-channel photonic crystal is 1.21–1.27. The maximum wavelength sensitivity is 10,000 nm/RIU with a resolution of 1 × 10 − 5 RIU, which is gained when the refractive index is set to 1.27. Based on the results of the single-channel PCF, a dual-channel PDMS-PCF sensor is designed. The refractive index detection range of the proposed sensor is 1.2–1.28. The proposed sensor has a maximum wavelength sensitivity of 13,000 nm/RIU and a maximum resolution of 7.69 × 10 − 6 RIU at a refractive index of 1.28. The designed PDMS-PCF holds tremendous potential for applications in the analysis and detection of substances in the human body in the future. [ABSTRACT FROM AUTHOR]

Nanoparticle- (NP-) doped optical fibres show the potential to increase the signal-to-noise ratio and thus the sensitivity of optical fibre strain detection for structural health monitoring. In this paper, our previous experimental/simulation study is extended to a design study for strain monitoring. 100 nm spherical gold NPs were randomly seeded in the optical fibre core to increase the intensity of backscattered light. Backscattered light spectra were obtained in different wavelength ranges around the infrared C-band and for different gauge lengths. Spectral shift values were obtained by cross-correlation of the spectra before and after strain change. The results showed that the strain accuracy has a positive correlation with the relative spectral sensitivity and that the strain precision decreases with increasing noise. Based on the simulated results, a formula for the sensitivity of the NP-doped optical fibre sensor was obtained using an aerospace case study to provide realistic strain values. An improved method is proposed to increase the accuracy of strain detection based on increasing the relative spectral sensitivity, and the results showed that the error was reduced by about 50%, but at the expense of a reduced strain measurement range and more sensitivity to noise. These results contribute to the better application of NP-doped optical fibres for strain monitoring. [ABSTRACT FROM AUTHOR]

Using the no-core fiber (NCF)–seven-core fiber (SCF) interference structure, two curvature sensors of Michelson interference type and Mach–Zehnder interference (MZI) type are proposed, respectively. The curvature sensor based on Michelson interference shows wavelength-modulation characteristics, the sensitivity is about −22.76 nm/m−1 with a linearity of 0.9823, the temperature sensitivity is only 0.054 nm/°C, and the effect of temperature on curvature can be negligible. The MZI sensor based on an enlarged taper-embedded cascaded structure is an intensity-modulated sensor. The sensitivities are −63.6271 dB m/m−1 and 93.3293 dBm/m−1 for the forward and reverse curvature, respectively, and the linearities are 0.9987 and 0.9930, respectively. But the strain sensitivity (8.357 × 10−4 dBm/με) of the MZI sensor is so tiny, which can avoid the strain cross effect. The two sensors can be used in the detection of the curvature at different (temperature/strain) conditions. [ABSTRACT FROM AUTHOR]

The cladding of PMMA based polymer optical fibers (POFs) is doped by Rhodamine 6G (Rh6G) in the solution composed of water and methanol. Methanol is added in order to lower the doping temperature compared to that of pure water. Results show that addition of methanol, like raising temperature, can effectively accelerate the doping process. It is also found that there is a critical doping temperature for the solution of given methanol content. Above that temperature, the doping process dramatically impairs the fiber and the fiber loss increases too much for further application. In addition, Microscope observation of cross-sections of doped fibers indicate that Rh6G only diffuses into the cladding. Concentration measurement of Rh6G in the cladding and the core of doped fibers confirms that there is almost no Rh6G in the core. In short, this study reveals that the doping process of PMMA based POFs can be accelerated by adding methanol into water at the same temperature. Most importantly, the solution of methanol and water may be able to dissolve those dopants that are insoluble in pure water, making the aqueous solution based doping method suitable for more dopants. [ABSTRACT FROM AUTHOR]

Conventional methods for pathogen detection in water rely on time-consuming enrichment steps followed by biochemical identification strategies, which require assay times ranging from 24 hours to a week. However, in recent years, significant efforts have been made to develop biosensing technologies enabling rapid and close-to-real-time detection of waterborne pathogens. In previous studies, we developed a plastic optical fiber (POF) immunosensor using an optoelectronic configuration consisting of a U-Shape probe connected to an LED and a photodetector. Bacterial detection was evaluated with the immunosensor immersed in a bacterial suspension in water with a known concentration. Here, we report on the sensitivity of a new optoelectronic configuration consisting of two POF U-shaped probes, one as the reference and the other as the immunosensor, for the detection of Escherichia coli. In addition, another methos of detection was tested where the sensors were calibrated in the air, before being immersed in a bacterial suspension and then read in the air. This modification improved sensor sensitivity and resulted in a faster detection time. After the immunocapture, the sensors were DAPI-stained and submitted to confocal microscopy. The histograms obtained confirmed that the responses of the immunosensors were due to the bacteria. This new sensor detected the presence of E. coli at 104 CFU/mL in less than 20 min. Currently, sub-20 min is faster than previous studies using fiber-optic based biosensors. We report on an inexpensive and faster detection technology when compared with conventional methods. [ABSTRACT FROM AUTHOR]

A dual-channel surface plasmon resonance (SPR) sensor, based upon a multimode-single mode-multimode-single mode- multimode (MSMSM) fiber structure, is reported for the simultaneous measurement of temperature and refractive index. One channel is coated with an indium tin oxide-silver layer for refractive index sensing, and the channel is coated with Au and cyclohexane layer for temperature sensing. The experiments show that the sensor provides high sensitivity with values of 3379 nm/RIU across the refractive index range from 1.333 to 1.3699 and −3.163 nm/°C from 40 °C to 90 °C. The cross-sensitivity problem is resolved by the dual-wavelength matrix method. Moreover, the proposed sensor has good stability, low cost, and a compact structure and may be employed in biology, chemistry, and environmental testing. [ABSTRACT FROM AUTHOR]

A composite fiber Fabry-Perot interferometer (FPI) -based optical fiber temperature sensor is theoretically proposed and practically demonstrated in this work, in which the composite FPI is formed by covering the end face of single-mode fiber with ultraviolet (UV) adhesive and nano-TiO 2 coating using the dip-coating method. With the superior thermo-optic characteristic of UV adhesive and the UV absorption of nano-TiO 2 , the sensitivity of the composite FPI temperature sensor can be effectively enhanced by UV irradiation. After five times of TiO 2 dip-coating processes, the composite FPI has a higher temperature sensitivity of 75.3 pm/°C (R2 = 0.9754) under 365 nm UV light, in which the measurement range is from 25 °C to 130 °C and the detection accuracy is 0.66 °C. The proposed sensor has a simple structure and preparation process, competitive sensitivity, high linearity, and satisfactory repeatability and stability, which can be an appropriate candidate to realize high-precision temperature sensing in industrial, chemical, biological, and environmental applications. [ABSTRACT FROM AUTHOR]

Here, the direct incorporation of photochromic WO3 nanoparticles is investigated in a matrix of polymethyl methacrylate (PMMA) by bulk radical polymerization for the fabrication of plastic optical fibers (POFs). All the prepared composites, from preforms to 1D single fibers and 2D fabrics, are thoroughly investigated, leading to insight into their thermal, morphological, and photochromic properties (coloring/bleaching amplitudes and kinetics). It is found that the preforms exhibit partially irreversible photochromic behavior, whereas the single fibers proved to be effectively reversibly photochromic through a degradation of transmission signal upon UV irradiation and a full recovery under dark conditions. The as‐prepared PMMA plastic fibers, both undoped and doped, show good homogeneity without any imperfections or contamination. The WO3 nanoparticles play a dual role as intrinsic and extrinsic absorption centres leading to higher transmission losses. Finally, a hand‐made textile woven with a bundle of doped fibers is presented. The proposed 1D single fibers and 2D fabrics demonstrate their great potential as novel hybrid inorganic–organic materials in the domain of flexible UV‐sensors and photochromic smart textile with improved color stability and lifetime. [ABSTRACT FROM AUTHOR]

The timely and cost-effective identification of the onset of corrosion and its progress would be critical for effectively maintaining structural integrity. Consequently, a series of fundamental experiments were conducted to capture the corrosion process on a steel plate using a new type of plastic optical fiber (POF) sensor. Electrolytic corrosion experiments were performed on a 5 mm thick steel plate immersed in an aqueous solution. The POF sensor installed on the upper side of the plate and directed downward detected the upward progression of the corrosion zone that formed on the underside of the plate. The results showed that the POF sensors could detect the onset of the upward-progressing corrosion front as it passed the 1 and 2 mm marks related to the thickness of the corroded zone. The POF sensors were designed to optically identify corrosion; therefore, the data obtained by these sensors could be processed using a newly developed graphic application software for smartphones and also identified by the naked eye. This method offered an easy and cost-effective solution for verifying the corrosion state of structural components. [ABSTRACT FROM AUTHOR]

Background: Simultaneous positron emission tomography (PET)/magnetic resonance imaging (MRI) scanners and inserts are valuable tools for accurate diagnosis, treatment planning, and monitoring due to their complementary information. However, the integration of a PET system into an MRI scanner presents technical challenges for a distortion‐free operation. Purpose: We aim to develop a PET insert dedicated to breast imaging in combination with the 3T PET/MRI scanner Biograph mMR (Siemens Healthineers) as well as a brain PET insert for the 7T MRI scanner MAGNETOM Terra (Siemens Healthineers). For this development, we selected as a basis the C13500 series PET modules (Hamamatsu Photonics K.K.) as they offer an all‐in‐one solution with a scalable, modular design for compact integration with state‐of‐the‐art performance. The original PET modules were not designed to be operated with an MRI scanner, therefore we implemented several modifications such as signal transmission via plastic optical fiber, radio frequency (RF) shielding of the front‐end electronics, and filter for the power supply lines. In this work, we evaluated the mutual MRI compatibility between the modified PET modules and the 3T and 7T MRI scanner. Methods: We used a proof‐of‐concept setup with two detectors to comprehensively evaluate a potential distortion of the performance of the modified PET modules whilst exposing them to a variety of MR sequences up to the peak operation conditions of the Biograph mMR. A method using the periodicity of the sequences to identify distortions of the PET events in the phase of RF pulse transmission was introduced. Vice versa, the potential distortion of the Biograph mMR was evaluated by vendor proprietary MRI compatibility test sequences. Afterwards, these studies were extended to the MAGNETOM Terra. Results: No distortions were introduced by gradient field switching (field strength up to 20 mT/m at a slew rate of 66.0 T/ms−1). However, RF pulse transmission induced a reduction of the single event rate from 33.0 kcounts/s to 32.0 kcounts/s and a degradation of the coincidence resolution time from 251 to 299 ps. Further, the proposed method revealed artifacts in the energy and timing histograms. Finally, by using the front‐end filters it was possible to prevent any RF pulse induced distortion of event rate, energy, or time stamps even for a 700° flip angle (45.5 μT) sequence. The evaluations to assess potential distortions of the MRI scanner showed that carefully designed RF shielding boxes for the PET modules were required to prevent distortion of the RF spectra. The increase in B0 field inhomogeneity of 0.254 ppm and local changes of the B1 field of 12.5% introduced by the PET modules did not qualitatively affect the MR imaging with a spin echo and MPRAGE sequence for the Biograph mMR and the MAGNETOM Terra, respectively. Conclusion: Our study demonstrates the feasibility of using a modified version of the PET modules in combination with 3T and 7T MRI scanners. Building upon the encouraging MRI compatibility results from our proof‐of‐concept detectors, we will proceed to develop PET inserts for breast and brain imaging using these modules. [ABSTRACT FROM AUTHOR]

This article compares the performance of U and coil-shaped fiber optic sensors for the detection of fluoride in water. Low-cost and simple-to-use U-shape and coil-shape evanescent wave fiber optic sensors have been designed and developed for in-situ detection of fluoride in water. The sensitivities of coil and U-shaped sensors are found to be 0.1418 O.D./ppm and 0.1409 O.D./ppm, respectively, with linear regression coefficients (R2) of 98.25% and 98.20%. [ABSTRACT FROM AUTHOR]

This document is a review of recent advancements in Fiber Bragg Grating (FBG) sensing technology. It explores the fabrication techniques, applications, and future trends of FBGs and optical fiber sensors. The review includes summaries of specific research articles that focus on topics such as enhancing FBG sensors, using smaller-diameter optical fibers, and developing FBG force sensors. The articles highlight the potential advantages and advancements in these areas of FBG sensing technology. The review serves as a guide to the evolving field of FBGs and optical fiber sensor technologies, showcasing their potential for precision measurement and real-time monitoring. [Extracted from the article]

This paper presents a temperature-insensitive optical fiber strain sensor composed of single-mode fiber (SMF), no core fiber (NCF), and few-mode fiber (FMF). The NCF is fused to two FMFs with core-offset, exciting higher-order modes and generating mode interference. Experimental results demonstrate that the strain sensitivity of the optical fiber sensor can reach − 19.19 pm/με in a strain range from 0 to 600 με. Moreover, within a temperature range from 30℃ to 70℃, the strain-temperature crosstalk of the proposed sensor is remarkably low at 0.104 με/℃. This sensor is easy to fabricate, cost-effective, reusable, and shows promising applications in food processing, civil engineering, aerospace, and other fields. [ABSTRACT FROM AUTHOR]

A proof of principle biosensor for the Brucella abortus recognition onsite is presented. The system is based on a plasmonic optical fiber probe functionalized with an oriented antibody layer immobilized on a short polyethyleneglycol (PEG) interface through carbodiimide chemistry and protein G as an intermediate layer. The biosensor is inserted in a holder built in 3D printing technology, obtaining a custom holder useful for housing the sample to be measured and the equipment. The removable sensor chip is a low-cost Surface Plasmon Resonance (SPR) platform based on D-shaped plastic optical fibers (POFs), built-in in 3D printed connectors, used here for the first time to detect bacteria via a bio-receptor layer specific for its membrane protein. The performances of the biosensor in Brucella abortus recognition are tested by using two different SPR-POF probes combined with the same bio-receptor layer. The best sensor configuration has presented a sensitivity at low concentrations of one order of magnitude greater than the other. A limit of detection (LoD) of 2.8 bacteria/mL is achieved well competitive with other systems but without the need for amplification or special sample treatments. Specificity has been tested using Salmonella bacteria, and reproducibility, regenerability and stability are moreover evaluated. These experimental results pave the way for building an efficient and specific biosensor system for Brucella abortus detection onsite and in a few minutes. Moreover, the proposed POF-based SPR biosensor device, with respect to the already available technologies, could be a Point-of-care-test (POCT), simple to use, small-size and portable, low-cost, don't necessary of a microfluidic system, and can be connected to the Internet (IoT). [ABSTRACT FROM AUTHOR]

As the focus tilts toward online detection methodologies for transformer oil aging, bypassing challenges associated with traditional offline methods, such as sample contamination and misinterpretation, fiber optic sensors are gaining traction due to their compact nature, cost-effectiveness, and resilience to electromagnetic disturbances that are typical in high-voltage environments. This study delves into the sensitivity analysis of intensity-modulated plastic optical fiber sensors. The investigation encompasses key determinants such as the influence of optical source wavelengths, noise response dynamics, ramifications of varying sensing lengths, and repeatability assessments. Our findings highlight that elongating sensing length detrimentally affects both linearity response and repeatability, largely attributed to a diminished resistance to noise. Additionally, the choice of the optical source wavelength proved to be a critical variable in assessing sensor sensitivity. [ABSTRACT FROM AUTHOR]

Robotic systems and the human body consist of numerous joint structures, all of which require precise angle adjustments. At present, encoder, strain gauge, and electrical resistance-based sensors are commonly used for angle measurement. However, these sensors have limitations when used in underwater or in environments with strong electromagnetic waves. Therefore, we have developed an angle sensor based on step-index profile plastic optical fiber (SI-POF), which is cost-effective and highly durable, in this study in order to overcome the limitations of existing angle measurement sensors. To this end, the amount of light loss according to the gab and angle changes that occur when the POF angle sensor is applied to the robot arm was experimentally measured, and based on the results, a simulation of the amount of light loss when the two losses occurred at the same time was conducted. In addition, the performance of the POF angle sensor was evaluated by measuring sensitivity and resolution, and comparative verification with a commonly used encoder was conducted to verify the reliability of sensors in extreme environments, such as those with electromagnetic fields and those that are underwater. Through this, the reliability and practicality of the POF angle sensor were confirmed. The results obtained in this study suggest that POF-based angle sensors can contribute to the development of the biomimetic robot industry as well as ordinary robots, especially in environments where existing sensors are difficult to apply, such as areas with underwater or electromagnetic interference (EMI). [ABSTRACT FROM AUTHOR]

Here, we improved the performance characteristics of surface plasmon resonance (SPR)-based optical sensors by using new two-dimensional materials in the structure of these sensors. We studied three types of two-dimensional materials: graphene, molybdenum disulfide (MoS2), and black phosphorus (BP). We also applied the angular interrogation method and employed numerical studies within MATLAB simulations. We investigated the characteristics of a simple configuration, including the type of prism, the thickness of the gold layer, and the number of layers of two-dimensional materials. We compared reflectance, sensitivity, detection accuracy (DA), and figure of merit (FoM) for various materials. We also studied the sensitivity of the sensor in relation to the refractive index of the sensing medium. We observed that the sensitivity reaches a peak at specific refractive index values. The best value for sensitivity is measured at 9778.9 RIU−1, with a detection accuracy of 32 deg−1 and FoM = 15,375 (deg·RIU)−1 for a black phosphorus-based structure. One distinctive feature of this study is investigating the effects of changing the resolution in simulations, which is considered one of the main factors in obtaining more accurate answers and achieving higher sensitivity. [ABSTRACT FROM AUTHOR]

A negative curvature hollow core fiber (NCHCF) refractive index (RI) sensor based on localized surface plasmon resonance (LSPR) is proposed. The gold nanowires are deposited in four cladding tubes in the y-direction, with the core region serving as the analyte channel. The full vector finite element method (FEM) is used to analyze the influence of various structural parameters on this sensor, and the structural parameters are optimized and selected. Ultimately, an average sensitivity of 9356.59 nm/RIU is accomplished within a spacious refractive index detection scope of RI = 1.28–1.43. The sensor attained a maximum sensitivity of 10,220 nm/RIU at RI = 1.36. In the bargain, there is an excellent linear correlation between the resonance wavelength and the refractive index of the analyte, with a value of 0.99901 and a factor of merit (FOM) range of 119.9563–155.9432 RIU−1, achieving a resolution of 10−6 RIU. The sensor has potential applications in various fields such as environmental protection, food safety, and medical diagnostics due to its high sensitivity, spacious detection scope, and positive linear response. [ABSTRACT FROM AUTHOR]

In this study, a sensor probe based on surface plasmon resonance (SPR) concept is proposed and examined for the detection of tuberculosis. The sensor probe includes a D-shaped photonic crystal fiber (PCF) micro-elliptical channel, gold (Au), and 2D materials like MOS2 and MXene. The finite element method (FEM) is utilized to compute the confinement loss and performance parameters for a healthy and tuberculosis-infected biomolecules. The effect of MoS2 on gold is to strengthen the coupling between the core mode and the surface plasmon polariton (SPP) mode of the fiber. In addition, the monolayer of MXene is functionalized as a bio-recognition element (BRE) above the MoS2 layer. The influence of inserting MoS2 and MXene on the sensor probe is examined in depth. Using MoS2 and MXene layers, the maximum wavelength sensitivity of the PCF structure is increased to 45,000 nm/RIU. Maximum figure of merit (FOM) for the sensor is 265 RIU−1, and it has a high refractive index (RI) resolution of 2.22 × 10−6 RIU. The acquired results indicate that the proposed probe has superior sensing capabilities compared to the biosensors used in recent investigations. Finally, the proposed 2D material-based D-shaped PCF sensor probe with functionalized MXene has a high value of sensitivity and FOM, making it a good platform for detecting tuberculosis-infected biomolecules having refractive index between 1.343 and 1.351 RIU. [ABSTRACT FROM AUTHOR]

Evanescent wave optical fibre sensors have attracted a lot of attention for the detection of chemical species due to their sensitivity, selectivity, and repeatability. In addition, plastic optical fibre sensors are inexpensive, simple to fabricate, and not only act as sensors, but the same fibre can also be used to transport sensor signals. The fibre sensor's sensitivity can be increased by removing the fibre cladding partially or fully. Also, different geometries have been reported to enhance the sensitivity of fibre sensors even more. In this paper, we report a U-shaped optical fibre sensor that utilises evanescent wave absorption as its primary mechanism for determining phosphate concentration in water. The U-shaped geometry offers enhanced sensitivity as compared to straight geometry. The developed U-shaped plastic optical fibre probe demonstrates impressive linear performance, which is evident in its remarkable regression coefficient of 98.48% and sensitivity of 0.0991 O.D./ppm. Due to their distinct features, plastic optical fibre sensors pave the way for improved water quality monitoring and analysis, which presents a vital contribution to both the industrial and environmental domains. [ABSTRACT FROM AUTHOR]

In this study, we propose a piezoelectric ceramic sensor-based health monitoring method to monitor the stress state of diagonally braced H-shaped steel structures. Loading experiments were carried out on diagonally braced H-shaped steel under different working conditions. Subsequently, the amplitude and energy of piezoelectric signals under these two working conditions were compared and analyzed, and finite element analysis was performed using ABAQUS software to verify the results. The experimental results showed that with an increase in the web height or load, the time-domain waveform energy index of the H-shaped steel increased. Under different working conditions, such as a diagonally braced H-shaped steel member with a web height of 10 cm, when the pressure value was less than 10 N/mm2, the energy index increased by approximately 15.98% for every 1 N/mm2 increase in the pressure. When the pressure value was greater than 10 N/mm2 and less than 15 N/mm2, the energy index increased by approximately 1% for every 1 N/mm2 increase in pressure. Further, the energy index increased by approximately 8.4% for every 1 cm increase in the height of the web. Simultaneously, it can be seen from the results of the finite element analysis that the stress and strain at the induction position of the piezoelectric ceramic sensor increased with an increase in the external pressure. The study of structural health monitoring for diagonally braced H-shaped steel structures holds significant importance in ensuring the safety and reliability of these structures, achieving predictive maintenance, evaluating structural performance and energy efficiency, and optimizing structural maintenance. [ABSTRACT FROM AUTHOR]

Fiber optic surface plasmon resonance (SPR) sensors are widely used in sensing applications in the fields of physics, chemistry and biology. This paper presents a numerical simulation of a D-shaped fiber optic SPR based refractive index sensor designed with a silver, gold, molybdenum disulfide, and graphene coated structure with and without gratings, for the first time. A FEM-based software is used to carry out the simulation studies. Aiming to obtain the highest performance, gold/silver layers are coated with MoS2 and graphene. Sensor parameters are computed and optimum values are discovered for these parameters; grating periods, gap size between gratings, residual cladding thickness, gratings numbers, and thickness of coating layers. 11,775 nm /RIU as the maximum sensitivity in the range of 1.33–1.4 RI is reached. Results demonstrate that the proposed multilayer and grated structure yields a 98.7% higher sensitivity value with reference to the simulation of a regular D-shaped Ag-coated fiber SPR sensor, which makes it promising for chemical, biochemical, and other applications of the future with the delicate sensing ability. [ABSTRACT FROM AUTHOR]

Behavior of a new step-index optical fiber having a Reuleaux-triangular-shaped core cross-section has been examined numerically. Two cases involving straight and bent optical fibers have been mainly discussed. Using James' equal-area formula, cut-off conditions of this proposed fiber have been given. Reuleaux-triangular-cored fiber can have a larger modal field area than circular-cored fiber with the same parameters when the normalized frequency is less than a certain value. As to a bent Reuleaux-triangular-cored fiber, bending orientation angle of this fiber is the most important factor determining the mode field distribution, except for the normalized frequency and bending radius. Compared with circular-cored optical fiber, the reduction of modal field area of this new fiber caused by bending can be reduced by 8.16%, and the bending loss can be reduced by 22.16%. Thus, the Reuleaux-triangular-cored fiber may be used as a bending sensor. [ABSTRACT FROM AUTHOR]

Using the dip-coating technique, a photo-anode based on a plastic optical fiber (POF) was coated with a mixture of titanium oxide nanoparticles (TiO2:Ti4O7). The semiconductor-coated material was prepared so that UV radiation fed into the fiber would escape along its path, photo-exciting the electrically polarized semiconductor film and producing oxidant species capable of degrading pollutant chemicals in aqueous solution. The photoelectrode was developed to evaluate the potential degradation of organic pollutants in aqueous solutions, and for this purpose, methyl red was used to assess the photo-anode performance under photocatalysis, electrocatalysis, and photo-electrocatalysis processes. The results revealed that, as expected from the specific properties of TiO2 and Ti4O7, the TiO2:Ti4O7-coated POF substrates showed a synergistic effect when UV light and electrical polarization are applied. The main purpose of using POFs instead of conventional SiO2 fibers is that the former implies substantially lower cost and mechanical flexibility, which will result in the future novel photo-electrochemical arrangements for water treatment. [ABSTRACT FROM AUTHOR]

An optical fiber sensor for the simultaneous measurement of microdisplacement and temperature based on balloon-shaped single-mode fibers cascaded with a fiber Bragg grating with two core-offset joints is proposed. The interference between the core mode and cladding mode is caused by the stimulation of the cladding mode by the core-offset joints' structure. The cladding of the core has a distinct refractive index, which causes optical path differences and interference. The balloon-shaped structure realizes mode selection by bending. As the displacement increases, the radius of the balloon-shaped interferometer changes, resulting in a change in the interference fringes of the interferometer, while the Bragg wavelength of the fiber grating remains unchanged. Temperature changes will cause the interference fringes of the interferometer and the Bragg wavelength of the fiber grating to shift. The proposed optical fiber sensor allows for the simultaneous measurement of microdisplacement and temperature. The results of the experiment indicate that the sensitivity of the interferometer to microdisplacement is 0.306 nm/µm in the sensing range of 0 to 200 μm and that the temperature sensitivity is 0.165 nm/°C, respectively. The proposed curvature sensor has the advantages of a compact structure, extensive spectrum of dynamic measurement, high sensitivity, and simple preparation, and has a wide range of potential applications in the fields of structural safety monitoring, aviation industry, and resource exploration. [ABSTRACT FROM AUTHOR]

The paper considers the advantages and disadvantages of existing methods for temperature compensation of data from fiber-optic sensors based on fiber Bragg gratings as part of an embedded system for simultaneous testing of deformation and temperature of polymer composite materials. It is shown that when external temperature testing is impossible, it is most expedient to implement the method of two optical fibers with different sensitivity to at least one of these parameters due to different dopants. Technological issues related to the formation of a spatial topology and the provision of an effective survey of the embedded optical system for monitoring polymer composite materials by the two-fiber method are considered. The results of theoretical research of a linear model of temperature compensation, a model that takes into account the influence of cross sensitivity, as well as a quadratic model of temperature compensation of optical testing data are presented. It has been established that the linear model is the simplest, however, when using it, one should take into account the error associated with the inaccuracy of the approximation of optical inspection data by a linear function. At the same time, it is shown that in order to improve the quality and reliability of the results of optical testing, it is advisable to use a quadratic model of temperature compensation, which provides an error level comparable to the error of the fiber-optic sensor survey device. The results obtained can be used to develop methods for the simultaneous testing of samples, as well as monolithic and three-layer structures from structural layered polymer composite materials with limiting molding conditions (temperature less than 180°C, specific pressure lower than 0.7 MPa), as in the process of bench and other tests, and, in the future, in real operating conditions. [ABSTRACT FROM AUTHOR]