Search

The Ricochet reactor neutrino observatory is planned to be installed at Institut Laue–Langevin starting in mid-2022. The scientific goal of the Ricochet collaboration is to perform a low-energy and percentage precision CENNS measurement in order to explore exotic physics scenarios beyond the standard model. To that end, Ricochet will host two cryogenic detector arrays: the CryoCube (Ge target) and the Q-ARRAY (Zn target), both with unprecedented sensitivity to O (10) eV nuclear recoils. The CryoCube will be composed of 27 Ge crystals of 38 g instrumented with NTD-Ge thermal sensor as well as aluminum electrodes operated at 10 mK in order to measure both the ionization and the heat energies arising from a particle interaction. To be a competitive CENNS detector, the CryoCube array is designed with the following specifications: a low-energy threshold ( ∼ 50 eV), the ability to identify and reject with a high efficiency the overwhelming electromagnetic backgrounds (gamma, beta, and X-rays), and a sufficient payload ( ∼ 1 kg). After a brief introduction of the future Ricochet experiment and its CryoCube, the current works and first performance results on the optimization of the heat channel, and the electrode designs will be presented. We conclude with a preliminary estimation of the CryoCube sensitivity to the CENNS signal within Ricochet. [ABSTRACT FROM AUTHOR]

The Ricochet reactor neutrino observatory is planned to be installed at the Laue Langevin Institute starting mid-2022. Its scientific goal is to perform a low-energy and high precision measurement of the coherent elastic neutrino-nucleus scattering spectrum in order to explore exotic physics scenarios. Ricochet will host two cryogenic detector arrays: the CryoCube (Ge target) and the Q-array (Zn target), operated at 10 mK. The 1 kg Ge CryoCube will consist of 27 Ge crystals instrumented with NTD-Ge thermal sensors and charge collection electrodes for a simultaneous heat and ionization readout to reject the electromagnetic backgrounds (gamma, beta, x-rays). We present the status of its front-end electronics. The first stage of amplification is made of High Electron Mobility Transistors developed by CNRS/C2N laboratory, optimized to achieve ultra-low noise performance at 1 K with a dissipation as low as 15 μ W per channel. Our noise model predicts that 10 eV heat and 20 eV ee RMS baseline resolutions are feasible with a high dynamic range for the deposited energy (up to 10 MeV) thanks to loop amplification schemes. Such resolutions are mandatory to have a high discrimination power between nuclear and electron recoils at the lowest energies. [ABSTRACT FROM AUTHOR]

We present the noise performance of high electron mobility transistors (HEMT) developed by CNRS/C2N laboratory. Various HEMT's gate geometries with 2 pF to 230 pF input capacitance have been studied at 4 K. A model for both voltage and current noises has been developed with frequency dependence up to 1 MHz. These HEMTs exhibit low dissipation, excellent noise performance and can advantageously replace traditional Si-JFETs for the readout of high impedance thermal sensor and semiconductor ionization cryogenic detectors. Our model predicts that cryogenic germanium detectors of 30 g with 10 eV heat and 20 eV ee baseline resolution are feasible if read out by HEMT-based amplifiers. Such resolution allows for high discrimination between nuclear and electron recoils at low threshold. This capability is of major interest for coherent elastic neutrino scattering and low-mass dark matter experiments such as Ricochet and EDELWEISS. [ABSTRACT FROM AUTHOR]

The dry cryostat technology is based on pulse tube cryo-coolers and offers a good alternative to wet dilution cryostats. However, the main drawback is the production of vibrations induced by the pulse tube. These vibrations can be transmitted to the cryogenic detectors mounted in the cryostat and cause extra-noises dramatically affecting their performance. A solution to mitigate the impact of these vibrations is to mount the detectors on a suspended tower. For this purpose, vibrations in a dry cryostat were modeled and preliminary prototypes were investigated in the scope of R&D for the EDELWEISS-III experiment. [ABSTRACT FROM AUTHOR]