Search

Light‐harvesting is a fundamental process in nature, which inspires researchers to develop artificial systems for photocatalysis, photovoltaics, and biosensing. A previously introduced light‐harvesting nanoantenna, based on polymeric nanoparticles (NPs) loaded with rhodamine dyes and bulky hydrophobic counterions, provides a record‐breaking antenna effect ≈1000. However, the high dye cooperativity of its thousands of encapsulated dyes causes energy losses by traces of self‐quenched dye aggregates. Here, it is found that these imperfections can be suppressed by blank hydrophobic salts (BHS) formed by the same bulky counterion (fluorinated tetraphenylborate) with an optically inactive cation, analogs of ionic liquids. The presence of BHS increases twofold the fluorescence quantum yields and fluorescence lifetimes of NPs and suppresses their fluorescence blinking. This study assumes that BHS provides an excess of bulky counterions that excludes traces of dye aggregates. As a result, an efficient Forster resonance energy transfer (FRET) is achieved from 40 000 dye donors to a single acceptor within a 70 nm particle, leading to the antenna effect of 4800, which is by far the highest value reported to date. Using this nanoantenna, a single‐molecule detection of the FRET acceptor is realized at low excitation power using an RGB camera of a smartphone. [ABSTRACT FROM AUTHOR]

Dye‐loaded polymeric nanoparticles emerge as powerful bioimaging tools, but their assembly is challenged by aggregation‐caused quenching (ACQ) of flat fluorophores. Aggregation‐induced emission (AIE) proposes an effective solution against ACQ by exploiting propeller‐shaped neutral fluorophores without polymeric blending. Fighting ACQ of ionic dyes in polymeric nanoparticles can be achieved by bulky hydrophobic counterions. Here, it is aimed to generate an AIE phenomenon in poorly emissive ionic dyes using bulky counterions. Three cationic hemicyanine dyes of styryl pyridinium family are synthesized: two planar fluorophores featuring ACQ and one propeller‐shaped AIE fluorophore. It is found that, in water, bulky fluorinated tetraphenylborates can light up all three dyes, including planar non‐AIE fluorophores. The described "ionic" AIE (iAIE) with bulky counterions enables preparation of 50‐nm dye‐loaded polymeric nanoparticles showing 40% quantum yield at 500 mm dye loading, whereas small anions favor poorly emissive large aggregates. Single‐particle microscopy reveals that these nanoparticles emit without blinking 50‐fold brighter than commercial quantum dots "Qdot 605" (at 470‐nm excitation). iAIE opens the route to assembling charged intrinsically non‐AIE fluorophores into bright fluorescent (nano)materials. [ABSTRACT FROM AUTHOR]

Controlling the emission of bright luminescent nanoparticles by a single molecular recognition event remains a challenge in the design of ultrasensitive probes for biomolecules. Herein, we developed 20‐nm light‐harvesting nanoantenna particles, built of a tailor‐made hydrophobic charged polymer poly(ethyl methacrylate‐co‐methacrylic acid), encapsulating circa 1000 strongly coupled and highly emissive rhodamine dyes with their bulky counterion. Being 87‐fold brighter than quantum dots QDots 605 in single‐particle microscopy (with 550‐nm excitation), these DNA‐functionalized nanoparticles exhibit over 50 % total FRET efficiency to a single hybridized FRET acceptor, a highly photostable dye (ATTO665), leading to circa 250‐fold signal amplification. The obtained FRET nanoprobes enable single‐molecule detection of short DNA and RNA sequences, encoding a cancer marker (survivin), and imaging single hybridization events by an epi‐fluorescence microscope with ultralow excitation irradiance close to that of ambient sunlight. [ABSTRACT FROM AUTHOR]

Controlling the emission of bright luminescent nanoparticles by a single molecular recognition event remains a challenge in the design of ultrasensitive probes for biomolecules. Herein, we developed 20‐nm light‐harvesting nanoantenna particles, built of a tailor‐made hydrophobic charged polymer poly(ethyl methacrylate‐co‐methacrylic acid), encapsulating circa 1000 strongly coupled and highly emissive rhodamine dyes with their bulky counterion. Being 87‐fold brighter than quantum dots QDots 605 in single‐particle microscopy (with 550‐nm excitation), these DNA‐functionalized nanoparticles exhibit over 50 % total FRET efficiency to a single hybridized FRET acceptor, a highly photostable dye (ATTO665), leading to circa 250‐fold signal amplification. The obtained FRET nanoprobes enable single‐molecule detection of short DNA and RNA sequences, encoding a cancer marker (survivin), and imaging single hybridization events by an epi‐fluorescence microscope with ultralow excitation irradiance close to that of ambient sunlight. [ABSTRACT FROM AUTHOR]

Detection of cellular microRNA biomarkers is an emerging powerful tool in cancer diagnostics. Currently, it requires multistep tedious protocols based on molecular amplification of the RNA target, e.g. RT-qPCR. Here, we developed a one-step enzyme-free method for microRNA detection in cellular extracts based on light-harvesting nanoparticle (nanoantenna) biosensors. They amplify the fluorescence signal by effective Förster resonance energy transfer (FRET) from ultrabright dye-loaded polymeric nanoparticle to a single acceptor and thus convert recognition of one microRNA copy (through nucleic acid strand displacement) into a response of >400 dyes. The developed nanoprobes of 17–19 nm diameter for four microRNAs (miR-21, let-7f, miR-222 and miR-30a) exhibit outstanding brightness (up to 3.8 × 107 M−1cm−1) and ratiometric sequence-specific response to microRNA with the limit of detection (LOD) down to 1.3 pM (21 amol), equivalent to 24 RT-qPCR cycles. They enable quantitative detection of the four microRNAs in RNA extracts from five cancerous cell lines (human breast cancer - T47D and MCF7, head and neck cancer - CAL33 and glioblastoma - LNZ308 and U373) and two non-cancerous ones (Hek293 and MCF10A), in agreement with RT-qPCR. The results confirmed that let-7f and especially miR-21 are systematically overexpressed in all studied cancerous cell lines. These nanoparticle biosensors are compatible with low-cost portable fluorometers and small detection volumes (11 amol LOD), opening a route to rapid point-of-care cancer diagnostics. • Fluorescent nanoprobes for microRNA detection in cell extracts are developed. • They amplify signal up to 130-fold by light-harvesting from ~400 FRET donor dyes. • They enable ratiometric analysis of microRNA with limit of detection down to 1.3 pM. • Biosensors for four microRNA are validated in 5 cancer and 2 healthy cell lines. • They are compatible with low-cost portable fluorometers and small detection volumes. [ABSTRACT FROM AUTHOR]

Point-of-care assays for optical detection of biomolecular markers attract growing attention, because of their capacity to provide rapid and inexpensive diagnostics of cancer and infectious diseases. Here, we designed a nanoprobe compatible with a smartphone RGB camera for detection of nucleic acids. It is based on light-harvesting polymeric nanoparticles (NPs) encapsulating green fluorescent donor dyes that undergo efficient Förster Resonance Energy Transfer (FRET) to red fluorescent acceptor hybridized at the particle surface. Green-emitting NPs are based on rhodamine 110 and 6G dyes paired with bulky hydrophobic counterions, which prevent dye self-quenching and ensure efficient energy transfer. Their surface is functionalized with a capture DNA sequence for cancer marker survivin, hybridized with a short oligonucleotide bearing FRET acceptor ATTO647N. Obtained 40-nm poly(methyl methacrylate)-based NP probe, encapsulating octadecyl rhodamine 6G dyes with tetrakis(perfluoro-tert-butoxy)aluminate counterions (~6000 dyes per NP), and bearing 65 acceptors, shows efficient FRET with >20% quantum yield and a signal amplification (antenna effect) of 25. It exhibits ratiometric response to the target DNA by FRET acceptor displacement and enables DNA detection in solution by fluorescence spectroscopy (limit of detection 3 pM) and on surfaces at the single-particle level using two-color fluorescence microscopy. Using a smartphone RGB camera, the nanoprobe response can be readily detected at 10 pM target in true color and in red-to-green ratio images. Thus, our FRET-based nanoparticle biosensor enables detection of nucleic acid targets using a smartphone coupled to an appropriate optical setup, opening the way to simple and inexpensive point-of-care assays. Image 1 • A light-harvesting DNA nanoprobe compatible with RGB camera system is developed. • The intensity ratio between red and green RGB channels of the nanoprobe allows DNA target quantification. • Detection of target sequence concentration in the picomolar range have been achieved. • High brightness and signal amplification of the nanoprobe enables smartphone-based detection of the target nucleic acids. [ABSTRACT FROM AUTHOR]