Search

LiNi0.5Mn1.5O4 (LNMO) is a promising cathode in lithium‐ion batteries (LIBs) due to its high operating voltage and open Li+ diffusion framework. However, the instability of the electrode–electrolyte interface and the negative environmental impact of electrode fabrication processes limit its practical application. Therefore, switching electrode processing conditions to aqueous and understanding the accompanying surface structural evolution are imperative. Here, water‐treated, poly(acrylic acid) (PAA)‐treated, and H3PO4‐treated LNMO, labeled as W‐LNMO, A‐LNMO, and H‐LNMO, are studied systematically. W‐LNMO shows a high concentration of Mn3+ induced by Li loss while a conformal PAA layer formed on A‐LNMO reduces this phenomenon. H‐LNMO displays a second MnPO4∙H2O phase. Upon cycling, a fast capacity decay is observed in W‐LNMO while an extra plateau at ≈2.7 V appears in the initial charging, corresponding to a two‐phase transition. A surface reconstruction layer from a spinel to a rock‐salt phase with a reductive Mn2+ segregation is observed in W‐LNMO after 105 cycles. The PAA layer persists on A‐LNMO and alleviates the capacity decay. H‐LNMO delivers a relatively low capacity due to the formation of a MnPO4∙H2O phase. This study provides new insights into manipulating the surface chemistry of LNMO cathodes to enable aqueous, large‐scale processingin LIBs. [ABSTRACT FROM AUTHOR]

Abstract: Here the thermal behaviour and the surface reactivity of cobalt catalysts supported by alumina‐silica and promoted by platinum were investigated by in situ transmission electron microscopy (in situ TEM) in a syngas environment. At the standard operating temperature of 220 °C, atomic diffusion and sintering processes onto the support are quite limited on the time scale of the TEM experiment. At temperatures between 350 and 450 °C, particles encapsulation occurred due to a higher CO dissociation and conversion into graphitic layers. Beyond 500 °C, carbon nanotubes (CNTs) growth is activated and the particles undergo (i) morphological changes through continuous elongation and contraction; and (ii) microstructural changes with the appearance of cobalt carbide. By comparing reactions under pure CO and a mixture CO−H2, it was shown that the addition of dihydrogen to CO increased the rate of CNTs growth and modified the structure of the nanotubes. These results clearly demonstrate the strong ability of the in situ TEM to provide the main lines of the reactivity synopsis of nanocatalysts at a nanometric scale under temperature and reactive gas. [ABSTRACT FROM AUTHOR]

Zeolites hold importance as catalysts and membranes across numerous industrial processes that produce most of the world's fuels and chemicals. In zeolite catalysis, the rate of molecular diffusion inside the micropore channels defines the catalyst's longevity and selectivity, thereby influencing the catalytic efficiency. Decreasing the diffusion pathlengths of zeolites to the nanoscopic level by fabricating well‐organized hierarchically porous architecture can efficiently overcome their intrinsic mass‐transfer limitations without losing hydrothermal stability. We report a rational post‐synthetic design for synthesizing hierarchically ordered FAU‐type zeolites exhibiting 2D‐hexagonal (P6mm) and 3D‐cubic (Ia3‾ ${\bar{3}}$ d) mesopore channels. The synthesis involves methodical incision of the parent zeolite into unit‐cell level zeolitic fragments by in situ generated base and bulky surfactants. The micellar ensembles formed by these surfactant‐zeolite interactions are subsequently reorganized into various ordered mesophases by tuning the micellar curvature with ion‐specific interactions (Hofmeister effect). Unlike conventional crystallization, which offers poor control over mesophase formation due to kinetic constraints, crystalline mesostructures can be developed under dilute, mild alkaline conditions by controlled reassembly. The prepared zeolites with nanometric diffusion pathlengths have demonstrated excellent yields of naphtha and middle‐distillates in vacuum gas oil hydrocracking with decreased coke deposition. [ABSTRACT FROM AUTHOR]

Zeolites hold importance as catalysts and membranes across numerous industrial processes that produce most of the world's fuels and chemicals. In zeolite catalysis, the rate of molecular diffusion inside the micropore channels defines the catalyst's longevity and selectivity, thereby influencing the catalytic efficiency. Decreasing the diffusion pathlengths of zeolites to the nanoscopic level by fabricating well‐organized hierarchically porous architecture can efficiently overcome their intrinsic mass‐transfer limitations without losing hydrothermal stability. We report a rational post‐synthetic design for synthesizing hierarchically ordered FAU‐type zeolites exhibiting 2D‐hexagonal (P6mm) and 3D‐cubic (Ia3‾ ${\bar{3}}$ d) mesopore channels. The synthesis involves methodical incision of the parent zeolite into unit‐cell level zeolitic fragments by in situ generated base and bulky surfactants. The micellar ensembles formed by these surfactant‐zeolite interactions are subsequently reorganized into various ordered mesophases by tuning the micellar curvature with ion‐specific interactions (Hofmeister effect). Unlike conventional crystallization, which offers poor control over mesophase formation due to kinetic constraints, crystalline mesostructures can be developed under dilute, mild alkaline conditions by controlled reassembly. The prepared zeolites with nanometric diffusion pathlengths have demonstrated excellent yields of naphtha and middle‐distillates in vacuum gas oil hydrocracking with decreased coke deposition. [ABSTRACT FROM AUTHOR]

Zeolites are widely used in many commercial processes, mostly as catalysts or adsorbents. Understanding their intimate structure at the nanoscale is the key to control their properties and design the best materials for their ever increasing uses. Herein, we report a new and controllable fluoride treatment for the non-discriminate extraction of zeolite framework cations. This sheds new light on the sub-structure of commercially relevant zeolite crystals: they are segmented along defect zones exposing numerous nanometer-sized crystalline domains, separated by low-angle boundaries, in what were apparent single-crystals. The concentration, morphology, and distribution of such domains analyzed by electron tomography indicate that this is a common phenomenon in zeolites, independent of their structure and chemical composition. This is a milestone to better understand their growth mechanism and rationally design superior catalysts and adsorbents. [ABSTRACT FROM AUTHOR]

Zeolites are widely used in many commercial processes, mostly as catalysts or adsorbents. Understanding their intimate structure at the nanoscale is the key to control their properties and design the best materials for their ever increasing uses. Herein, we report a new and controllable fluoride treatment for the non-discriminate extraction of zeolite framework cations. This sheds new light on the sub-structure of commercially relevant zeolite crystals: they are segmented along defect zones exposing numerous nanometer-sized crystalline domains, separated by low-angle boundaries, in what were apparent single-crystals. The concentration, morphology, and distribution of such domains analyzed by electron tomography indicate that this is a common phenomenon in zeolites, independent of their structure and chemical composition. This is a milestone to better understand their growth mechanism and rationally design superior catalysts and adsorbents. [ABSTRACT FROM AUTHOR]

The principle aspects and constraints of the dynamics and kinetics of zeolite nucleation in hydrogel systems are analyzed on the basis of a model Na-rich aluminosilicate system. A detailed time-series EMT-type zeolite crystallization study in the model hydrogel system was performed to elucidate the topological and temporal aspects of zeolite nucleation. A comprehensive set of analytical tools and methods was employed to analyze the gel evolution and complement the primary methods of transmission electron microscopy (TEM) and nuclear magnetic resonance (NMR) spectroscopy. TEM tomography reveals that the initial gel particles exhibit a core-shell structure. Zeolite nucleation is topologically limited to this shell structure and the kinetics of nucleation is controlled by the shell integrity. The induction period extends to the moment when the shell is consumed and the bulk solution can react with the core of the gel particles. These new findings, in particular the importance of the gel particle shell in zeolite nucleation, can be used to control the growth process and properties of zeolites formed in hydrogels. [ABSTRACT FROM AUTHOR]

According to the United Nations, around 53 million metric tons of electronic waste is produced every year, worldwide, the big majority of which goes unprocessed. With the rapid advances in AI technologies and adoption of smart gadgets, the demand for powerful logic and memory chips is expected to boom. Therefore, the development of green electronics is crucial to minimizing the impact of the alarmingly increasing e‐waste. Here, it is shown the application of a green synthesized, chemically stable, carbonyl‐decorated 2D organic, and biocompatible polymer as an active layer in a memristor device, sandwiched between potentially fully recyclable electrodes. The 2D polymer's ultramicro channels, decorated with C═O and O─H groups, efficiently promote the formation of copper nanofilaments. As a result, the device shows excellent bipolar resistive switching behavior with the potential to mimic synaptic plasticity. A large resistive switching window (103), low SET/RESET voltage of ≈0.5/−1.5 V), excellent device‐to‐device stability and synaptic features are demonstrated. Leveraging the device's synaptic characteristics, its applications in image denoising and edge detection is examined. The results show a reduction in power consumption by a factor of 103 compared to a traditional Tesla P40 graphics processing unit, indicating great promise for future sustainable AI‐based applications. [ABSTRACT FROM AUTHOR]

Hierarchical zeolites are regarded as promising catalysts due to their well‐developed porosity, increased accessible surface area, and minimal diffusion constraints. Thus far, the focus has been on the creation of mesopores in zeolites, however, little is known about a microporosity upgrading and its effect on the diffusion and catalytic performance. Here the authors show that the "birth" of mesopore formation in faujasite (FAU) type zeolite starts by removing framework T atoms from the sodalite (SOD) cages followed by propagation throughout the crystals. This is evidenced by following the diffusion of xenon (Xe) in the mesoporous FAU zeolite prepared by unbiased leaching with NH4F in comparison to the pristine FAU zeolite. A new diffusion pathway for the Xe in the mesoporous zeolite is proposed. Xenon first penetrates through the opened SOD cages and then diffuses to supercages of the mesoporous zeolite. Density functional theory (DFT) calculations indicate that Xe diffusion between SOD cage and supercage occurs only in hierarchical FAU structure with defect‐contained six‐member‐ring separating these two types of cages. The catalytic performance of the mesoporous FAU zeolite further indicates that the upgraded microporosity facilitates the intracrystalline molecular traffic and increases the catalytic performance. [ABSTRACT FROM AUTHOR]

Highlights: A novel optoelectronic synapse compatible with existing chip technology is demonstrated. This device excels in mimicking memory and learning functions using light, making it ideal for future neuromorphic computing in biomedicine. Our design surpasses previous models with its ability to switch between short-term and long-term memory states using light pulses. Experiments on real-world biomedical data (electroencephalogram, electromyography, electrocardiogram) showed significant improvement in classification accuracy. This highlights the device's potential for advanced physiological signal processing and wearable health monitoring systems. The emergence of the Internet-of-Things is anticipated to create a vast market for what are known as smart edge devices, opening numerous opportunities across countless domains, including personalized healthcare and advanced robotics. Leveraging 3D integration, edge devices can achieve unprecedented miniaturization while simultaneously boosting processing power and minimizing energy consumption. Here, we demonstrate a back-end-of-line compatible optoelectronic synapse with a transfer learning method on health care applications, including electroencephalogram (EEG)-based seizure prediction, electromyography (EMG)-based gesture recognition, and electrocardiogram (ECG)-based arrhythmia detection. With experiments on three biomedical datasets, we observe the classification accuracy improvement for the pretrained model with 2.93% on EEG, 4.90% on ECG, and 7.92% on EMG, respectively. The optical programming property of the device enables an ultra-low power (2.8 × 10−13 J) fine-tuning process and offers solutions for patient-specific issues in edge computing scenarios. Moreover, the device exhibits impressive light-sensitive characteristics that enable a range of light-triggered synaptic functions, making it promising for neuromorphic vision application. To display the benefits of these intricate synaptic properties, a 5 × 5 optoelectronic synapse array is developed, effectively simulating human visual perception and memory functions. The proposed flexible optoelectronic synapse holds immense potential for advancing the fields of neuromorphic physiological signal processing and artificial visual systems in wearable applications. [ABSTRACT FROM AUTHOR]

A correction to the article "3D Study of the Morphology and Dynamics of Zeolite Nucleation" that was published in a 2015 is presented.

In recent years, all‐solid‐state batteries (ASSBs) with metal anodes have witnessed significant developments due to their high energy and power density as well as their excellent safety record. While intergranular dendritic lithium growth in inorganic solid electrolytes (SEs) has been extensively studied for lithium ASSBs, comparable knowledge is missing for sodium‐based ASSBs. Therefore, polycrystalline Na‐β″‐alumina is employed as a SE model material to investigate the microstructural influence on sodium filament growth during deposition of sodium metal at the anode. The research focuses on the relationship between the microstructure, in particular grain boundary (GB) type and orientation, sodium filament growth, and sodium ion transport, utilizing in situ transmission electron microscopy (TEM) measurements in combination with crystal orientation analysis. The effect of the anisotropic sodium ion transport at/across GBs depending on the orientation of the sodium ion transport planes and the applied electric field on the current distribution and the position of sodium filament growth is explored. The in situ TEM analysis is validated by large field of view post‐mortem secondary ion mass spectrometer (SIMS) analysis, in which sodium filament growth within voids and along grain boundaries is observed, contributing to the sodium network formation potentially leading to failure of batteries. [ABSTRACT FROM AUTHOR]

The development of commercially viable fuel cells and metal‐air batteries requires effective and cheap bifunctional catalysts for the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER). Multi‐component Pt−Fe−Co−Ni nanoparticles on multi‐walled carbon nanotubes (MWCNTs) were synthesized by wet chemistry route via NaBH4 reduction of metal salts, followed by sintering at different temperatures. The catalyst demonstrates an excellent ORR activity and a promising OER activity in 0.1 m KOH, with a bi‐functional over‐potential, ΔE of 0.83 V, which is comparable to the values of Pt/C or RuO2. Furthermore, it shows outstanding long‐term stability in ORR and OER, namely diffusion limited current density at a potential of 0.3 V decreased just by 5.5 % after 10000 cycles in ORR. The results of the PFCN@NT300 indicate a significant effect of the substitution of Pt by the transition metal (TM) and the formation of nanoparticles on the catalytic performance, especially in the OER. [ABSTRACT FROM AUTHOR]

Zeolites are widely used in industrial processes, mostly as catalysts or adsorbents. Increasing their micropore volume could further improve their already exceptional catalytic and separation performances. We report a tunable extraction of zeolite framework cations (Si, Al) on a faujasite-type zeolite, the archetype of molecular sieves with cages and the most widely used as a catalyst and sorbent; this results in ca. 10% higher micropore volume with limited impact on its thermal stability. This increased micropore volume results from the opening of some of the small (sodalite) cages, otherwise inaccessible to most molecules. As more active sites become accessible, the catalytic performances for these modified zeolites are substantially improved. The method, based on etching with NH4F, is also applicable to other cage-containing microporous molecular sieves, where some of the most industrially relevant zeolites are found. [ABSTRACT FROM AUTHOR]

The article in Advanced Science discusses a sustainable memristor made from a green-synthesized 2D organic polymer with recyclable electrodes, showing promising applications in image denoising and edge detection. The device exhibits excellent resistive switching and stable synaptic features, indicating higher energy efficiency compared to traditional GPUs for sustainable AI-based applications. The research is conducted by a team of authors led by Dinesh Shetty and Nazek El-Atab, highlighting the potential for environmentally friendly electronics in the future. [Extracted from the article]

This document is a correction notice for an article titled "Highly Efficient Back-End-of-Line Compatible Flexible Si-Based Optical Memristive Crossbar Array for Edge Neuromorphic Physiological Signal Processing and Bionic Machine Vision" published in Nano-Micro Letters. The authors of the article discovered a mistake in the Supplementary file, specifically in figures S11 and S12, where they mistakenly used the same sub-figures. The original article has been corrected. The publisher, Springer Nature, remains neutral regarding jurisdictional claims and institutional affiliations. The authors of the article are Dayanand Kumar, Hanrui Li, Dhananjay D. Kumbhar, Manoj Kumar Rajbhar, Uttam Kumar Das, Abdul Momin Syed, Georgian Melinte, and Nazek El-Atab. [Extracted from the article]

We report on the production of hybrid graphene/semiconducting polymer films in one step procedure by making use of ultrasound-assisted liquid-phase exfoliation of graphite powder in the presence of π-conjugated polymers, i.e. poly(3-hexylthiophene) (P3HT) or poly[4-(4,4-dihexadecyl-4H-cyclopenta[1,2-b:5,4-b']dithiophen-2-yl)-alt-[1,2,5]thiadiazolo-[3,4-c]pyridine] (PCDTPT). The polymers were chosen in view of their different propensity to form crystalline structures, their decoration with alkyl chains that are known to possess high affinity for the basal plane of graphene, the energy levels of their frontier orbitals which are extremely similar to the work function of graphene, and their high electrical performance when integrated in field-effect transistors (FETs). The polymers act as a dispersion-stabilizing agent and prevent the re-aggregation of the exfoliated graphene flakes, ultimately enabling the production of homogeneous bi-component dispersions. The electrical characterization of few-layer graphene/PCDTPT hybrids, when integrated as active layer in bottom-contact bottom-gate FETs, revealed an increase of the field-effect mobility compared to the π-conjugated-based pristine devices, a result which can be attributed to the joint effect of the few-layer graphene sheets and semiconducting polymers improving the charge-transport in the channel of the field-effect transistor. In particular, few-layer graphene/PCDTPT films displayed a 30-fold increase of PCDTPT's mobility if compared to pristine polymer samples. Such findings represent a step forward towards the optimization of graphene exfoliation and processing into electronic devices, as well as towards improved electrical performance in organic-based field-effect transistors. [ABSTRACT FROM AUTHOR]

The C66(COOH)12 hexa-adduct has been successfully used as a building block to construct carboxylate bridged 3D networks with very homogeneous sub-1.8 nm ruthenium nanoparticles. The obtained nanostructures are active in nitrobenzene selective hydrogenation. [ABSTRACT FROM AUTHOR]

Desilication of mordenite crystals previously enriched in silica by dealumination has been investigated in order to better understand the process of mesopore formation. Pentene oligomerization in the liquid phase in the presence of an alkane solvent has been used to evaluate the catalytic activity of the desilicated zeolite. Relevant physico-chemical characteristics such as texture, porosity, acidity and composition of zeolite samples desilicated at 80 °C in NaOH solutions at different base concentrations were analyzed quantitatively. The generation of mesoporosity is due to the hydrolysis and dissolution of the surface of the crystals, probably initiated by the formation of etch pits at low coordination atoms, followed by surface roughening, formation and growth of internal mesopores, fragmentation and, ultimately, by a complete dissolution of the crystal. Such a process which is similar to the one involved in the chemical weathering of rocks, results in a severe loss of crystalline material and of the strong acidity associated to it. The oligomerization catalyst prepared from desilicated mesoporous mordenite proved highly stable and selective for the production of C 15 –C 30 oligomers from pentene. [ABSTRACT FROM AUTHOR]

The technological exploitation of the extraordinary properties of graphene relies on the ability to achieve full control over the production of a high-quality material and its processing by up-scalable approaches in order to fabricate large-area films with single-layer or a few atomic-layer thickness, which might be integrated in working devices. A simple method is reported for producing homogenous dispersions of unfunctionalized and non-oxidized graphene nanosheets in Nmethyl- 2-pyrrolidone (NMP) by using simple molecular modules, which act as dispersion-stabilizing compounds during the liquid-phase exfoliation (LPE) process, leading to an increase in the concentration of graphene in dispersions. The LPE-processed graphene dispersion was shown to be a conductive ink. This approach opens up new avenues for the technological applications of this graphene ink as low-cost electrodes and conducting nanocomposite for electronics. [ABSTRACT FROM AUTHOR]

The technological exploitation of the extraordinary properties of graphene relies on the ability to achieve full control over the production of a high-quality material and its processing by up-scalable approaches in order to fabricate large-area films with single-layer or a few atomic-layer thickness, which might be integrated in working devices. A simple method is reported for producing homogenous dispersions of unfunctionalized and non-oxidized graphene nanosheets in N-methyl-2-pyrrolidone (NMP) by using simple molecular modules, which act as dispersion-stabilizing compounds during the liquid-phase exfoliation (LPE) process, leading to an increase in the concentration of graphene in dispersions. The LPE-processed graphene dispersion was shown to be a conductive ink. This approach opens up new avenues for the technological applications of this graphene ink as low-cost electrodes and conducting nanocomposite for electronics. [ABSTRACT FROM AUTHOR]

The formation of α-Al 2 O 3 platelets by a bio-templating route using eggshell membranes is investigated. A facile solution soakage method was employed for the synthesis of Al 2 O 3. X-ray diffraction results indicated the Al 2 O 3 phase transformations occurring with the calcination temperature. The growth of α-Al 2 O 3 platelets were carefully studied using scanning and transmission electron microscopes. The biomacromolecules and functional groups present on the eggshell membrane bio-template played a crucial role in the formation of α-Al 2 O 3 platelets. A plausible growth mechanism based on the oriented attachment growth process involving the role of eggshell membrane has been proposed. This study paves the insight for the development of α-Al 2 O 3 anisotropic structures through bio-templated approach. Image, graphical abstract [ABSTRACT FROM AUTHOR]

Due to a unique combination of electrical and thermal conductivity, mechanical stiffness, strength and elasticity, graphene became a rising star on the horizon of materials science. This two-dimensional material has found applications in many areas of science ranging from electronics to composites. Making use of different approaches, unfunctionalized and non-oxidized graphene sheets can be produced; among them an inexpensive and scalable method based on liquid-phase exfoliation of graphite (LPE) holds potential for applications in opto-electronics and nanocomposites. Here we have used n-octylbenzene molecules as graphene dispersion-stabilizing agents during the graphite LPE process. We have demonstrated that by tuning the ratio between organic solvents such as N-methyl-2-pyrrolidinone or ortho-dichlorobenzene, and n-octylbenzene molecules, the concentration of exfoliated graphene can be enhanced by 230% as a result of the high affinity of the latter molecules for the basal plane of graphene. The LPE processed graphene dispersions were further deposited onto solid substrates by exploiting a new deposition technique called spin-controlled drop casting, which was shown to produce uniform highly conductive and transparent graphene films. [ABSTRACT FROM AUTHOR]